drivers/net/: sparse fixes

phy.c:46:5: warning: symbol 'genphy_config_advert' was not declared. Should it be static?
phy.c:121:5: warning: symbol 'genphy_setup_forced' was not declared. Should it be static?
phy.c:468:5: warning: symbol 'phy_probe' was not declared. Should it be static?
phy.c:491:19: warning: symbol 'get_phy_driver' was not declared. Should it be static?
phy.c:508:19: warning: symbol 'phy_device_create' was not declared. Should it be static?
phy.c:552:5: warning: symbol 'get_phy_id' was not declared. Should it be static?
phy.c:584:19: warning: symbol 'get_phy_device' was not declared. Should it be sta
vitesse.c:126:5: warning: symbol 'vsc8601_config' was not declared. Should it be static?
vsc7385.c:33:5: warning: symbol 'vsc7385_upload_firmware' was not declared. Should it be static?
tgec_phy.c:33:5: warning: symbol 'tgec_mdio_write' was not declared. Should it be static?
tgec_phy.c:75:5: warning: symbol 'tgec_mdio_read' was not declared. Should it be static?
tgec_phy.c:117:5: warning: symbol 'tgec_mdio_reset' was not declared. Should it be static?
eth.c:48:6: warning: symbol 'dtsec_configure_serdes' was not declared. Should it be static?
p4080.c:26:5: warning: symbol 'port_to_devdisr' was not declared. Should it be static?

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

drivers/net/fm/eth.c

@@ -46,7 +46,7 @@ static int num_controllers;
 			TBICR_FULL_DUPLEX | TBICR_SPEED1_SET)
 
 /* Configure the TBI for SGMII operation */
-void dtsec_configure_serdes(struct fm_eth *priv)
+static void dtsec_configure_serdes(struct fm_eth *priv)
 {
 #ifdef CONFIG_SYS_FMAN_V3
 	u32 value;

drivers/net/fm/p1023.c

@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1,
 	[FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2,
 };

drivers/net/fm/p4080.c

@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
 	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
 	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,

drivers/net/fm/p5020.c

@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
 	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
 	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,

drivers/net/fm/tgec_phy.c

@@ -30,8 +30,8 @@
  * until the write is done before it returns.  All PHY configuration has to be
  * done through the TSEC1 MIIM regs
  */
-int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
-			int regnum, u16 value)
+static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+			   int regnum, u16 value)
 {
 	u32 mdio_ctl;
 	u32 stat_val;
@@ -72,8 +72,8 @@ int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
  * Clears miimcom first.  All PHY configuration has to be done through the
  * TSEC1 MIIM regs
  */
-int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
-			int regnum)
+static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+			  int regnum)
 {
 	u32 mdio_ctl;
 	u32 stat_val;
@@ -114,7 +114,7 @@ int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
 	return in_be32(&regs->mdio_data) & 0xffff;
 }
 
-int tgec_mdio_reset(struct mii_dev *bus)
+static int tgec_mdio_reset(struct mii_dev *bus)
 {
 	return 0;
 }

drivers/net/phy/phy.c

@@ -43,7 +43,7 @@
  *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
  *   hasn't changed, and > 0 if it has changed.
  */
-int genphy_config_advert(struct phy_device *phydev)
+static int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
 	int oldadv, adv;
@@ -118,7 +118,7 @@ int genphy_config_advert(struct phy_device *phydev)
  * Description: Configures MII_BMCR to force speed/duplex
  *   to the values in phydev. Assumes that the values are valid.
  */
-int genphy_setup_forced(struct phy_device *phydev)
+static int genphy_setup_forced(struct phy_device *phydev)
 {
 	int err;
 	int ctl = 0;
@@ -465,7 +465,7 @@ int phy_register(struct phy_driver *drv)
 	return 0;
 }
 
-int phy_probe(struct phy_device *phydev)
+static int phy_probe(struct phy_device *phydev)
 {
 	int err = 0;
 
@@ -488,7 +488,7 @@ static struct phy_driver *generic_for_interface(phy_interface_t interface)
 	return &genphy_driver;
 }
 
-struct phy_driver *get_phy_driver(struct phy_device *phydev,
+static struct phy_driver *get_phy_driver(struct phy_device *phydev,
 				phy_interface_t interface)
 {
 	struct list_head *entry;
@@ -505,8 +505,9 @@ struct phy_driver *get_phy_driver(struct phy_device *phydev,
 	return generic_for_interface(interface);
 }
 
-struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
-					phy_interface_t interface)
+static struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
+					    int phy_id,
+					    phy_interface_t interface)
 {
 	struct phy_device *dev;
 
@@ -549,7 +550,7 @@ struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
  * Description: Reads the ID registers of the PHY at @addr on the
  *   @bus, stores it in @phy_id and returns zero on success.
  */
-int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
 {
 	int phy_reg;
 
@@ -581,8 +582,8 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
  * Description: Reads the ID registers of the PHY at @addr on the
  *   @bus, then allocates and returns the phy_device to represent it.
  */
-struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
-				phy_interface_t interface)
+static struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
+					 phy_interface_t interface)
 {
 	u32 phy_id = 0x1fffffff;
 	int i;

drivers/net/phy/vitesse.c

@@ -123,7 +123,7 @@ static int cis8204_config(struct phy_device *phydev)
 }
 
 /* Vitesse VSC8601 */
-int vsc8601_config(struct phy_device *phydev)
+static int vsc8601_config(struct phy_device *phydev)
 {
 	/* Configure some basic stuff */
 #ifdef CONFIG_SYS_VSC8601_SKEWFIX

drivers/net/vsc7385.c

@@ -16,6 +16,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/errno.h>
+#include "vsc7385.h"
 
 /*
  * Upload a Vitesse VSC7385 firmware image to the hardware