board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).

This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>

board/kb9202/kb9202.c

@@ -65,7 +65,7 @@ int dram_init (void)
 }
 
 #ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
 
 unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
 UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);

board/kup/common/pcmcia.c

@@ -4,11 +4,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -115,7 +115,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/lwmon/lwmon.c

@@ -761,7 +761,7 @@ static uchar *key_match (uchar *kbd_data)
 
 /*---------------Board Special Commands: PIC read/write ---------------*/
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 /***********************************************************************
 F* Function:     int do_pic (cmd_tbl_t *cmdtp, int flag,
 F*                           int argc, char *argv[]) P*A*Z*

board/lwmon/pcmcia.c

@@ -5,11 +5,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -127,7 +127,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/mbx8xx/pcmcia.c

@@ -6,11 +6,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -156,7 +156,7 @@ int pcmcia_hardware_enable (int slot)
 	return (0);
 	}
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable (int slot)
 {
 	return 0;	/* No hardware to disable */

board/mcc200/auto_update.c

@@ -44,7 +44,7 @@
 #error "must define CFG_HUSH_PARSER"
 #endif
 
-#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
+#if !((CONFIG_COMMANDS & CFG_CMD_FAT) || defined(CONFIG_CMD_FAT))
 #error "must define CFG_CMD_FAT"
 #endif
 

board/mcc200/mcc200.c

@@ -322,7 +322,7 @@ void ide_set_reset (int idereset)
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/ml2/serial.c

@@ -88,7 +88,7 @@ void serial_puts (const char *s)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
 void kgdb_serial_init (void)
 {
 }

board/mp2usb/mp2usb.c

@@ -61,7 +61,7 @@ int dram_init (void)
 }
 
 #ifdef CONFIG_DRIVER_ETHER
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
+#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
 
 /*
  * Name:

board/mpl/common/common_util.c

@@ -471,7 +471,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	if (strcmp(argv[1], "flash") == 0)
 	{
-#if (CONFIG_COMMANDS & CFG_CMD_FDC)
+#if (CONFIG_COMMANDS & CFG_CMD_FDC) || defined(CONFIG_CMD_FDC)
 		if (strcmp(argv[2], "floppy") == 0) {
  			char *local_args[3];
 			extern int do_fdcboot (cmd_tbl_t *, int, int, char *[]);
@@ -564,7 +564,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe(ulong physadr);
 void doc_init (void)
 {

board/mpl/common/common_util.h

@@ -39,7 +39,7 @@ void get_backup_values(backup_t *buf);
 
 void show_stdio_dev(void);
 void check_env(void);
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 void doc_init (void);
 #endif
 

board/mpl/vcma9/vcma9.c

@@ -132,7 +132,7 @@ int board_init(void)
 /*
  * NAND flash initialization.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 extern ulong
 nand_probe(ulong physadr);
 

board/mpl/vcma9/vcma9.h

@@ -31,7 +31,7 @@ extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
 
 void print_vcma9_info(void);
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 typedef enum {
 	NFCE_LOW,
 	NFCE_HIGH

board/nc650/nand.c

@@ -24,7 +24,7 @@
 #include <common.h>
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 

board/netphone/netphone.c

@@ -597,7 +597,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <linux/mtd/nand_legacy.h>
 

board/netstar/nand.c

@@ -22,7 +22,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 

board/netta/netta.c

@@ -555,7 +555,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if ((CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)) && defined(CFG_NAND_LEGACY)
 
 #include <linux/mtd/nand_legacy.h>
 
@@ -570,7 +570,7 @@ void nand_init(void)
 }
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 
 int pcmcia_init(void)
 {

board/netta/pcmcia.c

@@ -4,11 +4,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -264,7 +264,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/netta2/netta2.c

@@ -595,7 +595,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <linux/mtd/nand_legacy.h>
 

board/netvia/netvia.c

@@ -416,7 +416,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <linux/mtd/nand_legacy.h>
 

board/omap2420h4/omap2420h4.c

@@ -31,7 +31,7 @@
 #include <asm/arch/mem.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand_legacy.h>
 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 #endif
@@ -847,7 +847,7 @@ void update_mux(u32 btype,u32 mtype)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 void nand_init(void)
 {
     extern flash_info_t flash_info[];

board/pcippc2/pcippc2.c

@@ -202,7 +202,7 @@ void watchdog_reset (void)
 		enable_interrupts ();
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	switch (argc) {

board/pm520/pm520.c

@@ -314,7 +314,7 @@ void ide_set_reset (int idereset)
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/pm826/pm826.c

@@ -310,7 +310,7 @@ long int initdram (int board_type)
 	return (psize);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/pm828/pm828.c

@@ -343,7 +343,7 @@ long int initdram (int board_type)
 	return (psize);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/pn62/cmd_pn62.c

@@ -29,7 +29,7 @@
 #include <command.h>
 #include "pn62.h"
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 

board/prodrive/alpr/nand.c

@@ -26,7 +26,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <asm/processor.h>
 #include <nand.h>

board/prodrive/p3mx/serial.c

@@ -80,7 +80,7 @@ void serial_puts (const char *s)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
 void kgdb_serial_init (void)
 {
 }

board/prodrive/pdnb3/nand.c

@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 

board/prodrive/pdnb3/pdnb3.c

@@ -236,7 +236,7 @@ U_BOOT_CMD(
 	"address size\n    - boot FPGA with gzipped image at <address>\n"
 );
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_PCI)
+#if (CONFIG_COMMANDS & CFG_CMD_PCI) || defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
 extern struct pci_controller hose;
 extern void pci_ixp_init(struct pci_controller * hose);
 

board/r360mpi/pcmcia.c

@@ -4,11 +4,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/sacsng/sacsng.c

@@ -837,7 +837,7 @@ void show_boot_progress (int status)
 /*
  * The following are used to control the SPI chip selects for the SPI command.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_SPI)
+#if (CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)
 
 #define SPI_ADC_CS_MASK	0x00000800
 #define SPI_DAC_CS_MASK	0x00001000

board/sbc2410x/sbc2410x.c

@@ -31,7 +31,7 @@
 #include <common.h>
 #include <s3c2410.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand.h>
 #endif
 
@@ -136,7 +136,7 @@ int dram_init (void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 extern ulong nand_probe(ulong physadr);
 
 static inline void NF_Reset(void)

board/sc3/sc3nand.c

@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 #include <asm/processor.h>

board/siemens/common/fpga.c

@@ -219,7 +219,7 @@ static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
     return 1;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
 

board/siemens/pcu_e/pcu_e.c

@@ -368,7 +368,7 @@ void reset_phy (void)
 /*-----------------------------------------------------------------------
  * Board Special Commands: access functions for "PUMA" FPGA
  */
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 #define	PUMA_READ_MODE	0
 #define PUMA_LOAD_MODE	1

board/sixnet/sixnet.c

@@ -33,7 +33,7 @@
 # include <status_led.h>
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 #include <linux/mtd/nand_legacy.h>
 extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 #endif
@@ -75,7 +75,7 @@ int checkboard (void)
 
 /* ------------------------------------------------------------------------- */
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #error "SXNI855T has no PCMCIA port"
 #endif	/* CFG_CMD_PCMCIA */
 
@@ -327,7 +327,7 @@ int misc_init_r (void)
 	return (0);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 void nand_init(void)
 {
 	unsigned long totlen = nand_probe(CFG_DFLASH_BASE);

board/ssv/adnpesc1/adnpesc1.c

@@ -65,7 +65,7 @@ long int initdram (int board_type)
 /*
  * The following are used to control the SPI chip selects for the SPI command.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_SPI) && CONFIG_NIOS_SPI
+#if ((CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)) && CONFIG_NIOS_SPI
 
 #define	SPI_RTC_CS_MASK	0x00000001
 

board/ssv/common/cmd_sled.c

@@ -46,7 +46,7 @@ typedef struct {
 
 extern led_dev_t led_dev[];
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	int led_id = 0;

board/ssv/common/wd_pio.c

@@ -112,7 +112,7 @@ void hw_watchdog_reset(void)
 		enable_interrupts ();
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	nios_pio_t *ena_piop	 = (nios_pio_t*)CONFIG_HW_WDENA_BASE;

board/stxxtc/stxxtc.c

@@ -574,7 +574,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <linux/mtd/nand_legacy.h>
 

board/svm_sc8xx/svm_sc8xx.c

@@ -153,7 +153,7 @@ long int initdram (int board_type)
 	return (size_b0 );
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
 extern void doc_probe (ulong physadr);
 void doc_init (void)
 {

board/tqm5200/cmd_stk52xx.c

@@ -29,7 +29,7 @@
 #include <common.h>
 #include <command.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define DEFAULT_VOL	45

board/tqm5200/cmd_tb5200.c

@@ -29,7 +29,7 @@
 #include <common.h>
 #include <command.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 #if defined (CONFIG_TB5200)
 
 #define SM501_PANEL_DISPLAY_CONTROL	0x00080000UL

board/tqm8272/tqm8272.c

@@ -1065,7 +1065,7 @@ int update_flash_size (int flash_size)
 }
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 
 #include <nand.h>
 #include <linux/mtd/mtd.h>

board/trab/auto_update.c

@@ -46,7 +46,7 @@
 #error "must define CFG_HUSH_PARSER"
 #endif
 
-#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
+#if !((CONFIG_COMMANDS & CFG_CMD_FAT) || defined(CONFIG_CMD_FAT))
 #error "must define CFG_CMD_FAT"
 #endif
 

board/trab/cmd_trab.c

@@ -32,7 +32,7 @@
  * TRAB board specific commands. Especially commands for burn-in and function
  * test.
  */
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 /* limits for valid range of VCC5V in mV  */
 #define VCC5V_MIN       4500
@@ -846,7 +846,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int contact_temp;
 	int delay = 0;
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
 	struct rtc_time tm;
 #endif
 
@@ -862,7 +862,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	spi_init ();
 	while (1) {
 
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
 		rtc_get (&tm);
 		printf ("%4d-%02d-%02d %2d:%02d:%02d - ",
 			tm.tm_year, tm.tm_mon, tm.tm_mday,

board/trab/trab_fkt.c

@@ -148,7 +148,7 @@ static int rs485_receive_chars (char *data, int timeout);
 static unsigned short updcrc(unsigned short icrc, unsigned char *icp,
 			     unsigned int icnt);
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 static int trab_eeprom_read (char **argv);
 static int trab_eeprom_write (char **argv);
 int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
@@ -959,7 +959,7 @@ static int touch_check_pressed (void)
 
 static int touch_write_clibration_values (int calib_point, int x, int y)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 	int x_verify = 0;
 	int y_verify = 0;
 
@@ -1105,7 +1105,7 @@ static int rs485_receive_chars (char *data, int timeout)
 
 int do_serial_number (char **argv)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 	unsigned int serial_number;
 
 	if (strcmp (argv[2], "read") == 0) {
@@ -1139,7 +1139,7 @@ int do_serial_number (char **argv)
 
 int do_crc16 (void)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 	int crc;
 	unsigned char buf[EEPROM_MAX_CRC_BUF];
 
@@ -1260,7 +1260,7 @@ int do_gain (char **argv)
 
 int do_eeprom (char **argv)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 	if (strcmp (argv[2], "read") == 0) {
 		return (trab_eeprom_read (argv));
 	}
@@ -1278,7 +1278,7 @@ int do_eeprom (char **argv)
 #endif /* CFG_CMD_I2C */
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
 static int trab_eeprom_read (char **argv)
 {
 	int i;

board/uc100/pcmcia.c

@@ -4,11 +4,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
 }
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
 int pcmcia_hardware_disable(int slot)
 {
 	volatile immap_t	*immap;

board/w7o/cmd_vpd.c

@@ -24,7 +24,7 @@
 #include <common.h>
 #include <command.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
 
 #include "vpd.h"
 

board/xilinx/ml300/serial.c

@@ -122,7 +122,7 @@ serial_puts(const char *s)
 	}
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
 void
 kgdb_serial_init(void)
 {

board/zylonite/nand.c

@@ -22,7 +22,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
 #ifdef CONFIG_NEW_NAND_CODE
 
 #include <nand.h>