include/configs: Use new CONFIG_CMD_* in 83xx board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/MPC8313ERDB.h

@@ -341,26 +341,25 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#define CFG_BASE_COMMANDS	( CONFIG_CMD_DFL	\
-				| CFG_CMD_PING		\
-				| CFG_CMD_DHCP		\
-				| CFG_CMD_I2C		\
-				| CFG_CMD_MII		\
-				| CFG_CMD_DATE		\
-				| CFG_CMD_PCI)
-
-#define CONFIG_CMDLINE_EDITING 1
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-#define CFG_RAMBOOT_COMMANDS	(CFG_BASE_COMMANDS & \
-				 ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
 
 #if defined(CFG_RAMBOOT)
-#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS
-#else
-#define CONFIG_COMMANDS CFG_BASE_COMMANDS
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
+#define CONFIG_CMDLINE_EDITING 1
+
 
 /*
  * Miscellaneous configurable options

include/configs/MPC832XEMDS.h

@@ -423,41 +423,24 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_PCI \
-				| CFG_CMD_I2C) \
-				& \
-				~(CFG_CMD_ENV \
-				| CFG_CMD_LOADS))
-#else
-#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C) \
-				& \
-				~(CFG_CMD_ENV \
-				| CFG_CMD_LOADS))
-#endif
-#else
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
-				| CFG_CMD_PCI \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C)
-#else
-#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C  )
+    #define CONFIG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
@@ -468,7 +451,7 @@
 #define CFG_LOAD_ADDR		0x2000000	/* default load address */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
 	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
@@ -498,7 +481,7 @@
  */
 #define CFG_DCACHE_SIZE		16384
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
 #endif
 
@@ -575,7 +558,7 @@
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02	/* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

include/configs/MPC8349EMDS.h

@@ -475,44 +475,26 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
-				 | CFG_CMD_PING		\
-				 | CFG_CMD_PCI		\
-				 | CFG_CMD_I2C          \
-				 | CFG_CMD_DATE)	\
-				&			\
-				 ~(CFG_CMD_ENV		\
-				  | CFG_CMD_LOADS))
-#else
-#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
-				 | CFG_CMD_PING		\
-				 | CFG_CMD_I2C		\
-				 | CFG_CMD_DATE)	\
-				&			\
-				 ~(CFG_CMD_ENV		\
-				  | CFG_CMD_LOADS))
-#endif
-#else
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
-				| CFG_CMD_PCI		\
-				| CFG_CMD_PING		\
-				| CFG_CMD_I2C		\
-				| CFG_CMD_DATE		\
-				)
-#else
-#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
-				| CFG_CMD_PING		\
-				| CFG_CMD_I2C       	\
-				| CFG_CMD_MII       	\
-				| CFG_CMD_DATE		\
-				)
+    #define CONFIG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
@@ -523,7 +505,7 @@
 #define CFG_LOAD_ADDR	0x2000000	/* default load address */
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
 	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
@@ -544,7 +526,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
 #endif
 
@@ -695,7 +677,7 @@
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02	/* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

include/configs/MPC8349ITX.h

@@ -416,37 +416,31 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_LOADS_ECHO	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
 
-/* CONFIG_COMMANDS */
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SDRAM
 
 #ifdef CONFIG_COMPACT_FLASH
-#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
-#else
-#define CONFIG_COMMANDS_CF	0
+    #define CONFIG_CMD_IDE
+    #define CONFIG_CMD_FAT
 #endif
 
 #ifdef CONFIG_PCI
-#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
-#else
-#define CONFIG_COMMANDS_PCI	0
+    #define CONFIG_CMD_PCI
 #endif
 
 #ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
-#else
-#define CONFIG_COMMANDS_I2C	0
+    #define CONFIG_CMD_I2C
 #endif
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
-				CONFIG_COMMANDS_CF	| \
-				CFG_CMD_NET	| \
-				CFG_CMD_PING	| \
-				CONFIG_COMMANDS_I2C	| \
-				CONFIG_COMMANDS_PCI	| \
-				CFG_CMD_SDRAM	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_CACHE	| \
-				CFG_CMD_IRQ)
-#include <cmd_confdefs.h>
 
 /* Watchdog */
 
@@ -469,7 +463,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CFG_PROMPT	"MPC8349E-mITX-GP> "	/* Monitor Command Prompt */
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
     #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
@@ -492,7 +486,7 @@ boards, we say we have two, but don't display a message if we find only one. */
  */
 #define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
 #endif
 
@@ -617,7 +611,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02	/* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif

include/configs/MPC8360EMDS.h

@@ -457,41 +457,24 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-#if defined(CFG_RAMBOOT)
-#if defined(CONFIG_PCI)
-#define	 CONFIG_COMMANDS	((CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_PCI \
-				| CFG_CMD_I2C) \
-				& \
-				~(CFG_CMD_ENV \
-				| CFG_CMD_LOADS))
-#else
-#define	 CONFIG_COMMANDS	((CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C) \
-				& \
-				~(CFG_CMD_ENV \
-				| CFG_CMD_LOADS))
-#endif
-#else
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
 #if defined(CONFIG_PCI)
-#define	 CONFIG_COMMANDS	(CONFIG_CMD_DFL \
-				| CFG_CMD_PCI \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C)
-#else
-#define	 CONFIG_COMMANDS	(CONFIG_CMD_DFL \
-				| CFG_CMD_PING \
-				| CFG_CMD_ASKENV \
-				| CFG_CMD_I2C  )
+    #define CONFIG_CMD_PCI
 #endif
+
+#if defined(CFG_RAMBOOT)
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG		/* watchdog disabled */
 
@@ -502,7 +485,7 @@
 #define CFG_LOAD_ADDR		0x2000000 /* default load address */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	#define CFG_CBSIZE	1024 /* Console I/O Buffer Size */
 #else
 	#define CFG_CBSIZE	256 /* Console I/O Buffer Size */
@@ -532,7 +515,7 @@
  */
 #define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5 /*log base 2 of the above value */
 #endif
 
@@ -610,7 +593,7 @@
 #define BOOTFLAG_COLD	0x01 /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM	0x02 /* Software reboot */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif