Inicio Explorar Axuda
Rexistro Iniciar sesión
phyus
/
uboot-vybrid_public
8
0
Fork 0
Ficheiros Incidencias 0 Pull Requests 0 Wiki
Explorar o código

OMAP3: remove unused config macros

Most OMAP3 boards have various flash related macros in their configs
that are either not referenced anywhere in the code or are used by
drivers that are not enabled. Remove them.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Grazvydas Ignotas %!s(int64=15) %!d(string=hai) anos
pai
23df4f691a
achega
8b6724aa5a
Modificáronse 7 ficheiros con 0 adicións e 109 borrados
Dividir vista Mostrar estatísticas de Diff
  1. 0 18
      include/configs/omap3_beagle.h
  2. 0 18
      include/configs/omap3_evm.h
  3. 0 18
      include/configs/omap3_overo.h
  4. 0 20
      include/configs/omap3_pandora.h
  5. 0 7
      include/configs/omap3_sdp3430.h
  6. 0 18
      include/configs/omap3_zoom1.h
  7. 0 10
      include/configs/omap3_zoom2.h

+ 0 - 18
include/configs/omap3_beagle.h
Ver ficheiro 

@@ -304,9 +304,6 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 
-						/* one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
@@ -323,21 +320,6 @@
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
-/* Flash banks JFFS2 should use */
 
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 
-					CONFIG_SYS_MAX_NAND_DEVICE)
 
-#define CONFIG_SYS_JFFS2_MEM_NAND
 
-/* use flash_info[2] */
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;

+ 0 - 18
include/configs/omap3_evm.h
Ver ficheiro 

@@ -296,9 +296,6 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors */
 
-						/* on one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
@@ -321,21 +318,6 @@
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			boot_flash_env_addr
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
-/* Flash banks JFFS2 should use */
 
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 
-					CONFIG_SYS_MAX_NAND_DEVICE)
 
-#define CONFIG_SYS_JFFS2_MEM_NAND
 
-/* use flash_info[2] */
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;

+ 0 - 18
include/configs/omap3_overo.h
Ver ficheiro 

@@ -269,9 +269,6 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 
-						/* one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
@@ -288,21 +285,6 @@
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
-/* Flash banks JFFS2 should use */
 
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 
-					CONFIG_SYS_MAX_NAND_DEVICE)
 
-#define CONFIG_SYS_JFFS2_MEM_NAND
 
-/* use flash_info[2] */
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;

+ 0 - 20
include/configs/omap3_pandora.h
Ver ficheiro 

@@ -261,40 +261,20 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 
-						/* one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
 
 /* Monitor at start of flash */
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
 
 
 #define CONFIG_ENV_IS_IN_NAND		1
 
-#define ONENAND_ENV_OFFSET		0x240000 /* environment starts here */
 
 #define SMNAND_ENV_OFFSET		0x240000 /* environment starts here */
 
 
 #define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
-/* Flash banks JFFS2 should use */
 
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 
-					CONFIG_SYS_MAX_NAND_DEVICE)
 
-#define CONFIG_SYS_JFFS2_MEM_NAND
 
-/* use flash_info[2] */
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;

+ 0 - 7
include/configs/omap3_sdp3430.h
Ver ficheiro 

@@ -159,10 +159,6 @@
 
 #define PHYS_FLASH_SIZE			(128 << 20)
 
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max sectors on one chip */
 
 
-/* timeout values are in milliseconds */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
 /* OMITTED:  single 2 Gbit KFM2G16 OneNAND flash */
 
 
 #define CONFIG_ENV_IS_IN_FLASH		1
 
@@ -338,9 +334,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)
 
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 /*
 
  * NAND FLASH usage ... default nCS1:
 
  *  - four 128KB sectors for X-Loader

+ 0 - 18
include/configs/omap3_zoom1.h
Ver ficheiro 

@@ -277,9 +277,6 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 
-						/* one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
@@ -296,21 +293,6 @@
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
-/* Flash banks JFFS2 should use */
 
-#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
 
-					CONFIG_SYS_MAX_NAND_DEVICE)
 
-#define CONFIG_SYS_JFFS2_MEM_NAND
 
-/* use flash_info[2] */
 
-#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
 
-#define CONFIG_SYS_JFFS2_NUM_BANKS	1
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;

+ 0 - 10
include/configs/omap3_zoom2.h
Ver ficheiro 

@@ -246,9 +246,6 @@
 
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
 
 #define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
 
 
-#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
 
-						/* one chip */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
 
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 
 #define CONFIG_SYS_FLASH_BASE		boot_flash_base
 
@@ -263,13 +260,6 @@
 
 #define CONFIG_ENV_OFFSET		boot_flash_off
 
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
 
-/*-----------------------------------------------------------------------
 
- * CFI FLASH driver setup
 
- */
 
-/* timeout values are in ticks */
 
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
 
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)
 
-
 
 #ifndef __ASSEMBLY__
 
 extern unsigned int boot_flash_base;
 
 extern volatile unsigned int boot_flash_env_addr;