Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  tegra: define fdt_load/fdt_high variables
  tegra: enable bootz command
  tegra: usb: Fix device enumeration problem of USB1
  tegra: trimslice: set up serial flash pinmux
  tegra: add pin_mux_spi() board initialization function
  tegra: add GMC/GMD funcmux entry for SFLASH
  tegra: bootcmd: start USB only when needed
  tegra: bootcmd enhancements
  tegra: add enterrcm command
  tegra: enable CONFIG_ENV_VARS_UBOOT_CONFIG
  Add env vars describing U-Boot target board
  tegra: usb: fix wrong error check
  tegra: add ULPI on USB2 funcmux entry
  tegra: fix leftover CONFIG_TEGRA2_MMC & _SPI build switches
  tegra: Add Tamonten Evaluation Carrier support
  tegra: Use SD write-protect GPIO on Tamonten
  tegra: Implement gpio_early_init() on Tamonten
  tegra: Allow boards to perform early GPIO setup
  tegra: plutux: Add device tree support
  tegra: medcom: Add device tree support
  tegra: Rework Tamonten support
  beagle: add eeprom expansion board info for bct brettl4

Signed-off-by: Wolfgang Denk <wd@denx.de>

MAINTAINERS

@@ -813,6 +813,7 @@ Thierry Reding <thierry.reding@avionic-design.de>
 
 	plutux		Tegra2 (ARM7 & A9 Dual Core)
 	medcom		Tegra2 (ARM7 & A9 Dual Core)
+	tec		Tegra2 (ARM7 & A9 Dual Core)
 
 Christian Riesch <christian.riesch@omicron.at>
 Manfred Rudigier <manfred.rudigier@omicron.at>

README

@@ -2229,6 +2229,20 @@ The following options need to be configured:
 		the environment like the "source" command or the
 		boot command first.
 
+		CONFIG_ENV_VARS_UBOOT_CONFIG
+
+		Define this in order to add variables describing the
+		U-Boot build configuration to the default environment.
+		These will be named arch, cpu, board, vendor, and soc.
+
+		Enabling this option will cause the following to be defined:
+
+		- CONFIG_SYS_ARCH
+		- CONFIG_SYS_CPU
+		- CONFIG_SYS_BOARD
+		- CONFIG_SYS_VENDOR
+		- CONFIG_SYS_SOC
+
 - DataFlash Support:
 		CONFIG_HAS_DATAFLASH
 

arch/arm/cpu/armv7/tegra2/Makefile

@@ -39,6 +39,7 @@ COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
 COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
 COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
 COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o
+COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

arch/arm/cpu/armv7/tegra2/cmd_enterrcm.c

@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Derived from code (arch/arm/lib/reset.c) that is:
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/pmc.h>
+
+static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
+{
+	struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+
+	puts("Entering RCM...\n");
+	udelay(50000);
+
+	pmc->pmc_scratch0 = 2;
+	disable_interrupts();
+	reset_cpu(0);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	enterrcm, 1, 0, do_enterrcm,
+	"reset Tegra and enter USB Recovery Mode",
+	""
+);

arch/arm/cpu/armv7/tegra2/funcmux.c

@@ -209,9 +209,30 @@ int funcmux_select(enum periph_id id, int config)
 				pinmux_set_func(grp[i], PMUX_FUNC_KBC);
 				pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
 			}
+		}
+		break;
 
-			break;
+	case PERIPH_ID_USB2:
+		if (config == FUNCMUX_USB2_ULPI) {
+			pinmux_set_func(PINGRP_UAA, PMUX_FUNC_ULPI);
+			pinmux_set_func(PINGRP_UAB, PMUX_FUNC_ULPI);
+			pinmux_set_func(PINGRP_UDA, PMUX_FUNC_ULPI);
+
+			pinmux_tristate_disable(PINGRP_UAA);
+			pinmux_tristate_disable(PINGRP_UAB);
+			pinmux_tristate_disable(PINGRP_UDA);
 		}
+		break;
+
+	case PERIPH_ID_SPI1:
+		if (config == FUNCMUX_SPI1_GMC_GMD) {
+			pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+			pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
+
+			pinmux_tristate_disable(PINGRP_GMC);
+			pinmux_tristate_disable(PINGRP_GMD);
+		}
+		break;
 
 	default:
 		debug("%s: invalid periph_id %d", __func__, id);

arch/arm/cpu/armv7/tegra2/usb.c

@@ -290,7 +290,7 @@ static int init_usb_controller(struct fdt_usb *config,
 			break;
 		udelay(1);
 	}
-	if (loop_count == 100000)
+	if (!loop_count)
 		return -1;
 
 	return 0;

arch/arm/include/asm/arch-tegra2/funcmux.h

@@ -51,6 +51,12 @@ enum {
 	FUNCMUX_SDMMC4_ATC_ATD_8BIT = 0,
 	FUNCMUX_SDMMC4_ATB_GMA_4_BIT,
 	FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT,
+
+	/* USB configs */
+	FUNCMUX_USB2_ULPI = 0,
+
+	/* Serial Flash configs */
+	FUNCMUX_SPI1_GMC_GMD = 0,
 };
 
 /**

arch/arm/include/asm/arch-tegra2/tegra2.h

@@ -45,6 +45,7 @@
 #define NV_PA_CSITE_BASE	0x70040000
 #define TEGRA_USB1_BASE		0xC5000000
 #define TEGRA_USB3_BASE		0xC5008000
+#define TEGRA_USB_ADDR_MASK	0xFFFFC000
 
 #define TEGRA2_SDRC_CS0		NV_PA_SDRAM_BASE
 #define LOW_LEVEL_SRAM_STACK	0x4000FFFC

board/avionic-design/common/tamonten.c

@@ -1,7 +1,7 @@
 /*
  *  (C) Copyright 2010,2011
  *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
+ *  (C) Copyright 2011-2012
  *  Avionic Design GmbH <www.avionic-design.de>
  *
  * See file CREDITS for list of people who contributed to this
@@ -36,75 +36,50 @@
 #include <asm/arch/pinmux.h>
 #include <asm/arch/uart.h>
 #include <asm/arch/mmc.h>
-#include "tamonten.h"
 
-#ifdef CONFIG_TEGRA2_MMC
+#ifdef CONFIG_TEGRA_MMC
 #include <mmc.h>
 #endif
 
-DECLARE_GLOBAL_DATA_PTR;
-
-const struct tegra2_sysinfo sysinfo = {
-	CONFIG_TEGRA2_BOARD_STRING
-};
-
 /*
- * Routine: timer_init
- * Description: init the timestamp and lastinc value
+ * Routine: gpio_config_uart
+ * Description: Does nothing on Tamonten - no conflict w/SPI.
  */
-int timer_init(void)
+void gpio_config_uart(void)
 {
-	return 0;
 }
 
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-static void pin_mux_mmc(void)
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+void gpio_early_init(void)
 {
-	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
+	gpio_request(GPIO_PI4, NULL);
+	gpio_direction_output(GPIO_PI4, 1);
 }
 #endif
 
+#ifdef CONFIG_TEGRA_MMC
 /*
- * Routine: board_init
- * Description: Early hardware init.
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-int board_init(void)
+static void pin_mux_mmc(void)
 {
-	clock_init();
-	clock_verify();
-
-	/* boot param addr */
-	gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
-
-	return 0;
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
+	/* for write-protect GPIO PI6 */
+	pinmux_tristate_disable(PINGRP_ATA);
+	/* for CD GPIO PH2 */
+	pinmux_tristate_disable(PINGRP_ATD);
 }
 
-#ifdef CONFIG_TEGRA2_MMC
 /* this is a weak define that we are overriding */
 int board_mmc_init(bd_t *bd)
 {
-	debug("board_mmc_init called\n");
 	/* Enable muxes, etc. for SDMMC controllers */
 	pin_mux_mmc();
-	gpio_config_mmc();
 
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 4-bit bus */
-	tegra2_mmc_init(0, 4, -1, GPIO_PH2);
+	/* init dev 0, SD slot, with 4-bit bus */
+	tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
 
 	return 0;
 }
 #endif
-
-#ifdef CONFIG_BOARD_EARLY_INIT_F
-int board_early_init_f(void)
-{
-	/* Initialize selected UARTs */
-	board_init_uart_f();
-	return 0;
-}
-#endif /* EARLY_INIT */

board/avionic-design/common/tamonten.h

@@ -1,32 +0,0 @@
-/*
- *  (C) Copyright 2010,2011
- *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
- *  Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TAMONTEN_H_
-#define _TAMONTEN_H_
-
-void tegra2_start(void);
-void gpio_config_mmc(void);
-
-#endif /* TAMONTEN_H */

board/avionic-design/dts/tegra2-medcom.dts

@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Avionic Design Medcom-Wide";
+	compatible = "avionic-design,medcom", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	clocks {
+		clk_32k: clk_32k {
+			clock-frequency = <32000>;
+		};
+
+		osc {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	clock@60006000 {
+		clocks = <&clk_32k &osc>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};

board/avionic-design/dts/tegra2-plutux.dts

@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Avionic Design Plutux";
+	compatible = "avionic-design,plutux", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	clocks {
+		clk_32k: clk_32k {
+			clock-frequency = <32000>;
+		};
+
+		osc {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	clock@60006000 {
+		clocks = <&clk_32k &osc>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};

board/avionic-design/dts/tegra2-tec.dts

@@ -0,0 +1,58 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Avionic Design Tamonten Evaluation Carrier";
+	compatible = "avionic-design,tec", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+	};
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	clocks {
+		clk_32k: clk_32k {
+			clock-frequency = <32000>;
+		};
+
+		osc {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	clock@60006000 {
+		clocks = <&clk_32k &osc>;
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	i2c@7000c000 {
+		status = "disabled";
+	};
+
+	i2c@7000c400 {
+		status = "disabled";
+	};
+
+	i2c@7000c500 {
+		status = "disabled";
+	};
+
+	i2c@7000d000 {
+		status = "disabled";
+	};
+
+	usb@c5000000 {
+		status = "disabled";
+	};
+
+	usb@c5004000 {
+		status = "disabled";
+	};
+};

board/avionic-design/medcom/Makefile

@@ -1,7 +1,7 @@
 #
 #  (C) Copyright 2010,2011
 #  NVIDIA Corporation <www.nvidia.com>
-#  (C) Copyright 2011
+#  (C) Copyright 2011,2012
 #  Avionic Design GmbH <www.avionic-design.de>
 #
 #  See file CREDITS for list of people who contributed to this
@@ -26,12 +26,12 @@
 include $(TOPDIR)/config.mk
 
 ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
 endif
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
+COBJS	:= ../../nvidia/common/board.o
 COBJS	+= ../common/tamonten.o
 
 SRCS	:= $(COBJS:.o=.c)

board/avionic-design/medcom/medcom.c

@@ -1,45 +0,0 @@
-/*
- *  (C) Copyright 2010,2011
- *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
- *  Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/tegra2.h>
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SD card
- */
-void gpio_config_mmc(void)
-{
-	/* configure pin as input for card detect */
-	gpio_request(GPIO_PH2, "SD4 CD");
-	gpio_direction_input(GPIO_PH2);
-}
-#endif

board/avionic-design/plutux/Makefile

@@ -1,7 +1,7 @@
 #
 #  (C) Copyright 2010,2011
 #  NVIDIA Corporation <www.nvidia.com>
-#  (C) Copyright 2011
+#  (C) Copyright 2011,2012
 #  Avionic Design GmbH <www.avionic-design.de>
 #
 #  See file CREDITS for list of people who contributed to this
@@ -26,12 +26,12 @@
 include $(TOPDIR)/config.mk
 
 ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
 endif
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
+COBJS	:= ../../nvidia/common/board.o
 COBJS	+= ../common/tamonten.o
 
 SRCS	:= $(COBJS:.o=.c)

board/avionic-design/plutux/plutux.c

@@ -1,45 +0,0 @@
-/*
- *  (C) Copyright 2010,2011
- *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
- *  Avionic Design GmbH <www.avionic-design.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/tegra2.h>
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: gpio_config_mmc
- * Description: Set GPIOs for SD card
- */
-void gpio_config_mmc(void)
-{
-	/* configure pin as input for card detect */
-	gpio_request(GPIO_PH2, "SD4 CD");
-	gpio_direction_input(GPIO_PH2);
-}
-#endif

board/avionic-design/tec/Makefile

@@ -0,0 +1,50 @@
+#
+#  (C) Copyright 2010,2011
+#  NVIDIA Corporation <www.nvidia.com>
+#  (C) Copyright 2011,2012
+#  Avionic Design GmbH <www.avionic-design.de>
+#
+#  See file CREDITS for list of people who contributed to this
+#  project.
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#  MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common $(obj)../../nvidia/common)
+endif
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= ../../nvidia/common/board.o
+COBJS	+= ../common/tamonten.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/compal/paz00/paz00.c

@@ -20,7 +20,7 @@
 #include <asm/arch/pinmux.h>
 #include <asm/arch/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA2_MMC
+#ifdef CONFIG_TEGRA_MMC
 #include <mmc.h>
 #endif
 
@@ -32,7 +32,7 @@ void gpio_config_uart(void)
 {
 }
 
-#ifdef CONFIG_TEGRA2_MMC
+#ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)

board/compulab/trimslice/trimslice.c

@@ -30,7 +30,7 @@
 #include <asm/arch/pinmux.h>
 #include <asm/arch/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA2_MMC
+#ifdef CONFIG_TEGRA_MMC
 #include <mmc.h>
 #endif
 
@@ -42,6 +42,11 @@ void gpio_config_uart(void)
 {
 }
 
+void pin_mux_spi(void)
+{
+	funcmux_select(PERIPH_ID_SPI1, FUNCMUX_SPI1_GMC_GMD);
+}
+
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)

board/nvidia/common/board.c

@@ -64,6 +64,12 @@ void __pin_mux_usb(void)
 
 void pin_mux_usb(void) __attribute__((weak, alias("__pin_mux_usb")));
 
+void __pin_mux_spi(void)
+{
+}
+
+void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi")));
+
 /*
  * Routine: power_det_init
  * Description: turn off power detects
@@ -94,7 +100,8 @@ int board_init(void)
 #ifdef CONFIG_SPI_UART_SWITCH
 	gpio_config_uart();
 #endif
-#ifdef CONFIG_TEGRA2_SPI
+#ifdef CONFIG_TEGRA_SPI
+	pin_mux_spi();
 	spi_init();
 #endif
 	/* boot param addr */
@@ -132,11 +139,18 @@ int board_init(void)
 }
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
+static void __gpio_early_init(void)
+{
+}
+
+void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
+
 int board_early_init_f(void)
 {
 	board_init_uart_f();
 
 	/* Initialize periph GPIOs */
+	gpio_early_init();
 #ifdef CONFIG_SPI_UART_SWITCH
 	gpio_early_init_uart();
 #else

board/nvidia/common/board.h

@@ -25,6 +25,7 @@
 #define _BOARD_H_
 
 void gpio_config_uart(void);
+void gpio_early_init(void);
 void gpio_early_init_uart(void);
 
 /*

board/ti/beagle/beagle.c

@@ -68,6 +68,7 @@
 #define BBTOYS_VGA			0x02000B00
 #define BBTOYS_LCD			0x03000B00
 #define BCT_BRETTL3			0x01000F00
+#define BCT_BRETTL4			0x02000F00
 #define BEAGLE_NO_EEPROM		0xffffffff
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -417,8 +418,11 @@ int misc_init_r(void)
 		printf("Recognized BeagleBoardToys LCD board\n");
 		break;;
 	case BCT_BRETTL3:
-	    printf("Recognized bct electronic GmbH brettl3 board\n");
-	    break;
+		printf("Recognized bct electronic GmbH brettl3 board\n");
+		break;
+	case BCT_BRETTL4:
+		printf("Recognized bct electronic GmbH brettl4 board\n");
+		break;
 	case BEAGLE_NO_EEPROM:
 		printf("No EEPROM on expansion board\n");
 		setenv("buddy", "none");

boards.cfg

@@ -282,6 +282,7 @@ colibri_pxa270               arm         pxa         -                   toradex
 jornada                      arm         sa1100
 plutux                       arm         armv7       plutux              avionic-design tegra2
 medcom                       arm         armv7       medcom              avionic-design tegra2
+tec                          arm         armv7       tec                 avionic-design tegra2
 paz00                        arm         armv7       paz00               compal         tegra2
 trimslice                    arm         armv7       trimslice           compulab       tegra2
 atngw100                     avr32       at32ap      -                   atmel          at32ap700x

common/env_common.c

@@ -116,6 +116,17 @@ const uchar default_environment[] = {
 #if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
 	"pcidelay="	MK_STR(CONFIG_PCI_BOOTDELAY)	"\0"
 #endif
+#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
+	"arch="		CONFIG_SYS_ARCH			"\0"
+	"cpu="		CONFIG_SYS_CPU			"\0"
+	"board="	CONFIG_SYS_BOARD		"\0"
+#ifdef CONFIG_SYS_VENDOR
+	"vendor="	CONFIG_SYS_VENDOR		"\0"
+#endif
+#ifdef CONFIG_SYS_SOC
+	"soc="		CONFIG_SYS_SOC			"\0"
+#endif
+#endif
 #ifdef	CONFIG_EXTRA_ENV_SETTINGS
 	CONFIG_EXTRA_ENV_SETTINGS
 #endif

common/env_embedded.c

@@ -179,6 +179,17 @@ env_t environment __PPCENV__ = {
 #if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
 	"pcidelay="	MK_STR(CONFIG_PCI_BOOTDELAY)	"\0"
 #endif
+#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
+	"arch="		CONFIG_SYS_ARCH			"\0"
+	"cpu="		CONFIG_SYS_CPU			"\0"
+	"board="	CONFIG_SYS_BOARD		"\0"
+#ifdef CONFIG_SYS_VENDOR
+	"vendor="	CONFIG_SYS_VENDOR		"\0"
+#endif
+#ifdef CONFIG_SYS_SOC
+	"soc="		CONFIG_SYS_SOC			"\0"
+#endif
+#endif
 #ifdef	CONFIG_EXTRA_ENV_SETTINGS
 	CONFIG_EXTRA_ENV_SETTINGS
 #endif

drivers/usb/host/ehci-tegra.c

@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2009 NVIDIA Corporation
+ * Copyright (c) 2009-2012 NVIDIA Corporation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -29,6 +29,22 @@
 #include <asm/errno.h>
 #include <asm/arch/usb.h>
 
+/*
+ * A known hardware issue where Connect Status Change bit of PORTSC register
+ * of USB1 controller will be set after Port Reset.
+ * We have to clear it in order for later device enumeration to proceed.
+ * This ehci_powerup_fixup overrides the weak function ehci_powerup_fixup
+ * in "ehci-hcd.c".
+ */
+void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
+{
+	mdelay(50);
+	if (((u32) status_reg & TEGRA_USB_ADDR_MASK) != TEGRA_USB1_BASE)
+		return;
+	/* For EHCI_PS_CSC to be cleared in ehci_hcd.c */
+	if (ehci_readl(status_reg) & EHCI_PS_CSC)
+		*reg |= EHCI_PS_CSC;
+}
 
 /*
  * Create the appropriate control structures to manage

include/configs/medcom.h

@@ -1,7 +1,7 @@
 /*
  *  (C) Copyright 2010,2011
  *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
+ *  (C) Copyright 2011-2012
  *  Avionic Design GmbH <www.avionic-design.de>
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,6 +28,11 @@
 
 #include "tegra2-common.h"
 
+/* Enable fdt support for Medcom. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra2-medcom
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
 /* High-level configuration options */
 #define V_PROMPT			"Tegra2 (Medcom) # "
 #define CONFIG_TEGRA2_BOARD_STRING	"Avionic Design Medcom"
@@ -47,6 +52,20 @@
 #define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2

include/configs/plutux.h

@@ -1,7 +1,7 @@
 /*
  *  (C) Copyright 2010,2011
  *  NVIDIA Corporation <www.nvidia.com>
- *  (C) Copyright 2011
+ *  (C) Copyright 2011-2012
  *  Avionic Design GmbH <www.avionic-design.de>
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,6 +28,11 @@
 
 #include "tegra2-common.h"
 
+/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra2-plutux
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
 /* High-level configuration options */
 #define V_PROMPT			"Tegra2 (Plutux) # "
 #define CONFIG_TEGRA2_BOARD_STRING	"Avionic Design Plutux"
@@ -47,6 +52,20 @@
 #define CONFIG_TEGRA_MMC
 #define CONFIG_CMD_MMC
 
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
 #define CONFIG_DOS_PARTITION
 #define CONFIG_EFI_PARTITION
 #define CONFIG_CMD_EXT2

include/configs/tec.h

@@ -0,0 +1,82 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *  (C) Copyright 2011-2012
+ *  Avionic Design GmbH <www.avionic-design.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra2-common.h"
+
+/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra2-tec
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT			"Tegra2 (TEC) # "
+#define CONFIG_TEGRA2_BOARD_STRING	"Avionic Design Tamonten Evaluation Carrier"
+#define CONFIG_SYS_BOARD_ODMDATA	0x2b0d8011
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA2_ENABLE_UARTD	/* UARTD: debug UART */
+#define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTD_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+#define CONFIG_FIT
+
+#define CONFIG_BOOTCOMMAND				\
+	"mmc rescan;"					\
+	"ext2load mmc 0 0x17000000 /boot/uImage;"	\
+	"bootm"
+
+#endif /* __CONFIG_H */

include/configs/tegra2-common-post.h

@@ -31,15 +31,15 @@
 #else
 
 #ifdef CONFIG_CMD_EXT2
-#define BOOTCMD_FS_EXT2 "ext2 "
+#define BOOT_FSTYPE_EXT2 "ext2 "
 #else
-#define BOOTCMD_FS_EXT2 ""
+#define BOOT_FSTYPE_EXT2 ""
 #endif
 
 #ifdef CONFIG_CMD_FAT
-#define BOOTCMD_FS_FAT "fat"
+#define BOOT_FSTYPE_FAT "fat"
 #else
-#define BOOTCMD_FS_FAT ""
+#define BOOT_FSTYPE_FAT ""
 #endif
 
 #ifdef CONFIG_CMD_MMC
@@ -47,71 +47,103 @@
 	"mmc_boot=" \
 		"setenv devtype mmc; " \
 		"if mmc dev ${devnum}; then " \
-			"run script_boot; " \
+			"run scan_boot; " \
 		"fi\0" \
-	"mmc0_boot=setenv devnum 0; run mmc_boot;\0" \
-	"mmc1_boot=setenv devnum 1; run mmc_boot;\0" \
-	"bootcmd_mmc=run mmc1_boot; run mmc0_boot\0"
-#define BOOTCMD_MMC "run bootcmd_mmc; "
+	"bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
+	"bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
+#define BOOT_TARGETS_MMC "mmc1 mmc0"
 #else
 #define BOOTCMDS_MMC ""
-#define BOOTCMD_MMC ""
+#define BOOT_TARGETS_MMC ""
 #endif
 
 #ifdef CONFIG_CMD_USB
+#define BOOTCMD_INIT_USB "run usb_init; "
 #define BOOTCMDS_USB \
+	"usb_init=" \
+		"if ${usb_need_init}; then " \
+			"set usb_need_init false; " \
+			"usb start 0; " \
+		"fi\0" \
+	\
 	"usb_boot=" \
 		"setenv devtype usb; " \
+		BOOTCMD_INIT_USB \
 		"if usb dev ${devnum}; then " \
-			"run script_boot; " \
+			"run scan_boot; " \
 		"fi\0" \
-	"usb0_boot=setenv devnum 0; run usb_boot;\0" \
-	"bootcmd_usb=run usb0_boot\0"
-#define BOOTCMD_USB "run bootcmd_usb; "
-#define BOOTCMD_INIT_USB "usb start 0; "
+	\
+	"bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
+#define BOOT_TARGETS_USB "usb0"
 #else
-#define BOOTCMDS_USB ""
-#define BOOTCMD_USB ""
 #define BOOTCMD_INIT_USB ""
+#define BOOTCMDS_USB ""
+#define BOOT_TARGETS_USB ""
 #endif
 
 #ifdef CONFIG_CMD_DHCP
 #define BOOTCMDS_DHCP \
 	"bootcmd_dhcp=" \
+		BOOTCMD_INIT_USB \
 		"if dhcp ${scriptaddr} boot.scr.uimg; then "\
 			"source ${scriptaddr}; " \
 		"fi\0"
-#define BOOTCMD_DHCP "run bootcmd_dhcp; "
+#define BOOT_TARGETS_DHCP "dhcp"
 #else
 #define BOOTCMDS_DHCP ""
-#define BOOTCMD_DHCP ""
+#define BOOT_TARGETS_DHCP ""
 #endif
 
 #define BOOTCMDS_COMMON \
 	"scriptaddr=0x400000\0" \
+	\
 	"rootpart=1\0" \
-	"script_boot="													\
-		"for fs in " BOOTCMD_FS_EXT2 BOOTCMD_FS_FAT "; do "							\
-		    "for prefix in / /boot/; do "									\
-			"for script in boot.scr.uimg boot.scr; do "							\
-			    "echo Scanning ${devtype} ${devnum}:${rootpart} ${fs} ${prefix}${script} ...; "		\
-			    "if ${fs}load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then "	\
-				"echo ${script} found! Executing ...;"							\
-				"source ${scriptaddr};"									\
-			    "fi; "											\
-			"done; "											\
-		    "done; "												\
-		"done;\0"												\
+	\
+	"script_boot="                                                    \
+		"if ${fs}load ${devtype} ${devnum}:${rootpart} "          \
+				"${scriptaddr} ${prefix}${script}; then " \
+			"echo ${script} found! Executing ...;"            \
+			"source ${scriptaddr};"                           \
+		"fi;\0"                                                   \
+	\
+	"scan_boot="                                                      \
+		"echo Scanning ${devtype} ${devnum}...; "                 \
+		"for fs in ${boot_fstypes}; do "                          \
+			"for prefix in ${boot_prefixes}; do "             \
+				"for script in ${boot_scripts}; do "      \
+					"run script_boot; "               \
+				"done; "                                  \
+			"done; "                                          \
+		"done;\0"                                                 \
+	\
+	"boot_targets=" \
+		BOOT_TARGETS_MMC " " \
+		BOOT_TARGETS_USB " " \
+		BOOT_TARGETS_DHCP " " \
+		"\0" \
+	\
+	"boot_fstypes=" \
+		BOOT_FSTYPE_EXT2 " " \
+		BOOT_FSTYPE_FAT " " \
+		"\0" \
+	\
+	"boot_prefixes=/ /boot/\0" \
+	\
+	"boot_scripts=boot.scr.uimg boot.scr\0" \
+	\
 	BOOTCMDS_MMC \
 	BOOTCMDS_USB \
 	BOOTCMDS_DHCP
 
-#define CONFIG_BOOTCOMMAND BOOTCMD_INIT_USB BOOTCMD_USB BOOTCMD_MMC BOOTCMD_DHCP
+#define CONFIG_BOOTCOMMAND \
+	"for target in ${boot_targets}; do run bootcmd_${target}; done"
 
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA2_DEVICE_SETTINGS \
+	"fdt_load=0x01000000\0" \
+	"fdt_high=01100000\0" \
 	BOOTCMDS_COMMON
 
 #endif /* __TEGRA2_COMMON_POST_H */

include/configs/tegra2-common.h

@@ -68,6 +68,7 @@
 #endif
 
 /* Environment */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_SIZE			0x2000	/* Total Size Environment */
 
 /*
@@ -192,4 +193,6 @@
 
 #define CONFIG_TEGRA_GPIO
 #define CONFIG_CMD_GPIO
+#define CONFIG_CMD_ENTERRCM
+#define CONFIG_CMD_BOOTZ
 #endif /* __TEGRA2_COMMON_H */

mkconfig

@@ -161,6 +161,14 @@ for i in ${TARGETS} ; do
 	echo "#define CONFIG_${i}" >>config.h ;
 done
 
+echo "#define CONFIG_SYS_ARCH  \"${arch}\""  >> config.h
+echo "#define CONFIG_SYS_CPU   \"${cpu}\""   >> config.h
+echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h
+
+[ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h
+
+[ "${soc}"    ] && echo "#define CONFIG_SYS_SOC    \"${soc}\""    >> config.h
+
 cat << EOF >> config.h
 #define CONFIG_BOARDDIR board/$BOARDDIR
 #include <config_cmd_defaults.h>