am33xx: Turn a number of 'int' functions to 'void'

A number of memory initalization functions were int and always returned
0.  Further it's not feasible to be doing error checking here, so simply
turn them into void functions.

Signed-off-by: Tom Rini <trini@ti.com>

arch/arm/cpu/armv7/am33xx/ddr.c

@@ -39,27 +39,20 @@ static struct ddr_regs *ddr_reg[2] = {
 static struct ddr_cmdtctrl *ioctrl_reg = {
 			(struct ddr_cmdtctrl *)DDR_CONTROL_BASE_ADDR};
 
-/**
- * As a convention, all functions here return 0 on success
- * -1 on failure.
- */
-
 /**
  * Configure SDRAM
  */
-int config_sdram(struct sdram_config *cfg)
+void config_sdram(struct sdram_config *cfg)
 {
 	writel(cfg->refresh, &emif_reg->emif_sdram_ref_ctrl);
 	writel(cfg->refresh_sh, &emif_reg->emif_sdram_ref_ctrl_shdw);
 	writel(cfg->sdrcr, &emif_reg->emif_sdram_config);
-
-	return 0;
 }
 
 /**
  * Set SDRAM timings
  */
-int set_sdram_timings(struct sdram_timing *t)
+void set_sdram_timings(struct sdram_timing *t)
 {
 	writel(t->time1, &emif_reg->emif_sdram_tim_1);
 	writel(t->time1_sh, &emif_reg->emif_sdram_tim_1_shdw);
@@ -67,25 +60,21 @@ int set_sdram_timings(struct sdram_timing *t)
 	writel(t->time2_sh, &emif_reg->emif_sdram_tim_2_shdw);
 	writel(t->time3, &emif_reg->emif_sdram_tim_3);
 	writel(t->time3_sh, &emif_reg->emif_sdram_tim_3_shdw);
-
-	return 0;
 }
 
 /**
  * Configure DDR PHY
  */
-int config_ddr_phy(struct ddr_phy_control *p)
+void config_ddr_phy(struct ddr_phy_control *p)
 {
 	writel(p->reg, &emif_reg->emif_ddr_phy_ctrl_1);
 	writel(p->reg_sh, &emif_reg->emif_ddr_phy_ctrl_1_shdw);
-
-	return 0;
 }
 
 /**
  * Configure DDR CMD control registers
  */
-int config_cmd_ctrl(const struct cmd_control *cmd)
+void config_cmd_ctrl(const struct cmd_control *cmd)
 {
 	writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio);
 	writel(cmd->cmd0csforce, &ddr_reg[0]->cm0csforce);
@@ -104,14 +93,12 @@ int config_cmd_ctrl(const struct cmd_control *cmd)
 	writel(cmd->cmd2csdelay, &ddr_reg[0]->cm2csdelay);
 	writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff);
 	writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout);
-
-	return 0;
 }
 
 /**
  * Configure DDR DATA registers
  */
-int config_ddr_data(int macrono, const struct ddr_data *data)
+void config_ddr_data(int macrono, const struct ddr_data *data)
 {
 	writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0);
 	writel(data->datardsratio1, &ddr_reg[macrono]->dt0rdsratio1);
@@ -131,17 +118,13 @@ int config_ddr_data(int macrono, const struct ddr_data *data)
 	writel(data->datawrsratio1, &ddr_reg[macrono]->dt0wrsratio1);
 
 	writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0);
-
-	return 0;
 }
 
-int config_io_ctrl(struct ddr_ioctrl *ioctrl)
+void config_io_ctrl(struct ddr_ioctrl *ioctrl)
 {
 	writel(ioctrl->cmd1ctl, &ioctrl_reg->cm0ioctl);
 	writel(ioctrl->cmd2ctl, &ioctrl_reg->cm1ioctl);
 	writel(ioctrl->cmd3ctl, &ioctrl_reg->cm2ioctl);
 	writel(ioctrl->data1ctl, &ioctrl_reg->dt0ioctl);
 	writel(ioctrl->data2ctl, &ioctrl_reg->dt1ioctl);
-
-	return 0;
 }

arch/arm/cpu/armv7/am33xx/emif4.c

@@ -107,7 +107,6 @@ static void config_vtp(void)
 
 static void config_emif_ddr2(void)
 {
-	int ret;
 	struct sdram_config cfg;
 	struct sdram_timing tmg;
 	struct ddr_phy_control phyc;
@@ -130,18 +129,9 @@ static void config_emif_ddr2(void)
 	cfg.refresh_sh = DDR2_EMIF_SDREF;
 
 	/* Program EMIF instance */
-	ret = config_ddr_phy(&phyc);
-	if (ret < 0)
-		printf("Couldn't configure phyc\n");
-
-
-	ret = set_sdram_timings(&tmg);
-	if (ret < 0)
-		printf("Couldn't configure timings\n");
-
-	ret = config_sdram(&cfg);
-	if (ret < 0)
-		printf("Couldn't configure SDRAM\n");
+	config_ddr_phy(&phyc);
+	set_sdram_timings(&tmg);
+	config_sdram(&cfg);
 }
 
 void config_ddr(short ddr_type)

arch/arm/include/asm/arch-am33xx/ddr_defs.h

@@ -82,17 +82,17 @@ struct sdram_config {
 /**
  * Configure SDRAM
  */
-int config_sdram(struct sdram_config *cfg);
+void config_sdram(struct sdram_config *cfg);
 
 /**
  * Set SDRAM timings
  */
-int set_sdram_timings(struct sdram_timing *val);
+void set_sdram_timings(struct sdram_timing *val);
 
 /**
  * Configure DDR PHY
  */
-int config_ddr_phy(struct ddr_phy_control *cfg);
+void config_ddr_phy(struct ddr_phy_control *cfg);
 
 /**
  * This structure represents the DDR registers on AM33XX devices.
@@ -183,12 +183,12 @@ struct ddr_data {
 /**
  * Configure DDR CMD control registers
  */
-int config_cmd_ctrl(const struct cmd_control *cmd);
+void config_cmd_ctrl(const struct cmd_control *cmd);
 
 /**
  * Configure DDR DATA registers
  */
-int config_ddr_data(int data_macrono, const struct ddr_data *data);
+void config_ddr_data(int data_macrono, const struct ddr_data *data);
 
 /**
  * This structure represents the DDR io control on AM33XX devices.
@@ -217,7 +217,7 @@ struct ddr_ioctrl {
 /**
  * Configure DDR io control registers
  */
-int config_io_ctrl(struct ddr_ioctrl *ioctrl);
+void config_io_ctrl(struct ddr_ioctrl *ioctrl);
 
 struct ddr_ctrl {
 	unsigned int ddrioctrl;