Merge git://www.denx.de/git/u-boot

CHANGELOG

@@ -1,3 +1,75 @@
+commit 5728be389e65fd47f34b33c2596271eb4db751ae
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon Aug 6 01:01:49 2007 +0200
+
+    Coding style cleanup. Update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 8092fef4c29b395958bb649647da7e3775731517
+Author: Martin Krause <Martin.Krause@tqs.de>
+Date:	Tue Dec 12 14:26:01 2006 +0100
+
+    Add functions to list of exported functions
+
+    Additionally export the following fuctions (to make trab_config build again):
+    - simple_strtol()
+    - strcmp()
+
+    Also bump the ABI version to reflect this change
+
+    Signed-off-by: Martin Krause <martin.krause@tqs.de>
+
+commit 63cec5814fab5d2b1c86982327433807a5ac0249
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Thu Aug 2 14:09:49 2007 -0500
+
+    Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
+
+    All of the PCI/PCI-Express driver and initialization code that
+    was in the MPC8641HPCN port has now been moved into the common
+    drivers/fsl_pci_init.c.  In a subsequent patch, this will be
+    utilized by the 85xx ports as well.
+
+    Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
+
+    Also enable the second PCI-Express controller on 8641
+    by getting its BATS and CFG_ setup right.
+
+    Fixed a u16 vendor compiler warning in AHCI driver too.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Fri Aug 3 04:05:25 2007 -0500
+
+    Add Marvell 1149 PHY support to the TSEC
+
+commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Aug 2 21:27:46 2007 +0200
+
+    Coding style cleanup, update CHANGELOG
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 63e22764d2f8653f68888c667eb65b3996b52680
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Aug 2 10:11:18 2007 +0200
+
+    Minor cleanup of <board>_nand build rules.
+
+commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Aug 2 00:48:45 2007 +0200
+
+    Fix build errors and warnings / code cleanup.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
 Author: Rafal Jaworowski <raj@semihalf.com>
 Date:	Fri Jul 27 14:43:59 2007 +0200
@@ -75,6 +147,154 @@ Date:	Thu Jul 12 01:45:34 2007 +0200
 
     Signed-off-by: Wolfgang Denk <wd@denx.de>
 
+commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Fri Jun 8 16:41:18 2007 -0500
+
+    Remove erroneous errata code from Marvel 88E1111S driver
+
+    The Marvel 88E1111S driver for the TSEC was copied from the
+    88E1101 driver, and included a fix for an erratum which does not
+    exist on that part.  Now it is removed
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Tue Jun 5 16:38:44 2007 -0500
+
+    From: eran liberty <eran.liberty@gmail.com>
+
+    adds the reset register to 85xx immap
+
+    Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Thu May 10 17:50:01 2007 -0500
+
+    Polished the 85xx ADS config files
+
+    Made the boot commands use device trees by default.
+    Also moved the ramdisk to 1000000 (I think the previous address
+    was getting overridden during boot).
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed May 9 11:03:32 2007 -0500
+
+    8544ds: Fix Makefile after moving pixis to board/freescale.
+
+    The OBJTREE != SRCTREE build scenario was broken.
+    This fixes it.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Wed May 9 00:54:20 2007 -0500
+
+    tsec: Fix PHY code to match first driver
+
+    Jarrold Wen noticed that the generic PHY code always matches
+    under the current implementation.  Change it so the first match
+    wins, and *only* unknown PHYs trigger the generic driver
+
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit ccc091aac61a38cd998d575d92f7232e256d6312
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Tue May 8 17:27:43 2007 -0500
+
+    Add support for CPM device tree configuration to 8560 ADS
+
+    * Adds code to modify CPM frequencies
+    * Cleans up the config file to #define TSEC and (for now) #undef FCC
+    * Adds the MII command for all 8560 ADS configurations
+    * Updates config file to provide convenience commands for booting
+      with a device tree
+
+    Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Tue May 8 17:23:02 2007 -0500
+
+    Fix Marvell 88e1145 PHY init code
+
+    Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
+    where the reset was being done after the errata code instead of
+    before.
+
+    Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 5dc210dec5bace98a50b6ba905347890091a9bb0
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Jul 11 14:52:16 2007 -0500
+
+    Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Jul 11 14:52:08 2007 -0500
+
+    pciauto setup bridge
+
+    The P2P bridge bus numbers programmed into the device are relative to
+    hose->first_busno.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 571f49fa717004ca4268b4e24057efc7bf9f987b
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Jul 11 14:52:01 2007 -0500
+
+    Support PCIe extended config registers
+
+    FSL PCIe block has extended cfg registers in the 100 and 400 range.
+    For example, to read the LTSSM register: pci display <busn>.0 404 1
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit ba5feb12581bb2912ce301e4866b71f846e9fc07
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Jul 11 14:51:48 2007 -0500
+
+    Minor improvements to drivers/pci_auto.c
+
+    - Make pciauto_{pre,post}scan_setup_bridge non-static
+    - Added physical address display in debug messages.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 40e81addab7bb74d20ddf681ce9babc880a828ee
+Author: Ed Swarthout <Ed.Swarthout@freescale.com>
+Date:	Wed Jul 11 14:51:35 2007 -0500
+
+    Start pci hose scan from hose->current_busno.
+
+    Ensure hose->current_busno is not less than first_busno.  This fixes
+    broken board code which leaves current_busno=0 when first_busno is
+    greater than 0 for the cases with multiple controllers.
+
+    Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
+
+commit 3865b1fb7843a08ad49a6319a36415752276ff48
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Jul 11 12:13:53 2007 +0200
+
+    Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
 Author: Bartlomiej Sieka <tur@semihalf.com>
 Date:	Wed Jul 11 20:11:07 2007 +0200
@@ -95,51 +315,1434 @@ Date:	Wed Jul 11 18:39:11 2007 +0200
 
     Signed-off-by: Heiko Schocher <hs@denx.de>
 
-commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
-Author: Wolfgang Denk <wd@denx.de>
-Date:	Tue Jul 10 00:01:28 2007 +0200
+commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
+Author: Stefan Roese <sr@denx.de>
+Date:	Sun Jul 8 13:44:27 2007 +0200
 
-    Coding style cleanup; update CHANGELOG.
+    Fix malloc problem introduced with the relocation fixup for the PPC platform
 
-    Signed-off-by: Wolfgang Denk <wd@denx.de>
+    The relocation fixup didn't handle the malloc pointer initialization
+    correctly. This patch fixes this problem. Tested successfully on 4xx.
+    The relocation fixup patches for 4xx will follow soon.
 
-commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
-Author: Wolfgang Denk <wd@denx.de>
-Date:	Fri Jul 6 02:50:19 2007 +0200
+    Signed-off-by: Stefan Roese <sr@denx.de>
 
-    Code cleanup and default config update for STC GP3 SSA board.
+commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 11:19:50 2007 -0500
 
-    Signed-off-by: Wolfgang Denk <wd@denx.de>
+    disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
 
-commit b44896215a09c60fa40cae906f7ed207bbc2c492
-Author: Sergei Poselenov <sposelenov@emcraft.com>
-Date:	Thu Jul 5 08:17:37 2007 +0200
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
 
-    Merged POST framework with the current TOT.
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 11:13:21 2007 -0500
 
-commit f780b83316d9af1f61d71cc88b1917b387b9b995
-Author: Niklaus Giger <niklausgiger@gmx.ch>
-Date:	Wed Jun 27 18:11:38 2007 +0200
+    drivers/: Remove lingering references to CFG_CMD_* symbols.
 
-    resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
 
-    Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
-commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
-Author: Stefan Roese <sr@denx.de>
-Date:	Wed Jul 4 10:06:30 2007 +0200
+commit f40a7f3e3888b42a43674b099e5470022c8c544c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 11:07:56 2007 -0500
 
-    ppc4xx: Update lwmon5 board
+    fs/: Remove lingering references to CFG_CMD_* symbols.
 
-    - Add optional ECC generation routine to preserve existing
-      RAM values. This is needed for the Linux log-buffer support
-    - Add optional DDR2 setup with CL=4
-    - GPIO50 not used anymore
-    - Lime register setup added
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
 
-    Signed-off-by: Stefan Roese <sr@denx.de>
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 11:05:02 2007 -0500
+
+    net/: Remove lingering references to CFG_CMD_* symbols.
+
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 902531788376046da212afd1661cffb62f3daa1c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 11:02:44 2007 -0500
+
+    common/: Remove lingering references to CFG_CMD_* symbols.
+
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d39b57415838c73fb0a37eca84de3c68ba990586
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 10:48:22 2007 -0500
+
+    board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
+
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 77a318545d57aefa844752465b94c7e09a3f26d0
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 10:39:10 2007 -0500
+
+    board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
+
+    Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
+    Those always evaluated TRUE, and thus were always compiled
+    even when IDE really wasn't defined/wanted.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 10:27:39 2007 -0500
+
+    cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 079a136c3588814784561d6e4856970ee82d6e2a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 10:12:10 2007 -0500
+
+    include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 09:38:02 2007 -0500
+
+    include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 09:29:01 2007 -0500
+
+    include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 09:22:23 2007 -0500
+
+    include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 09:10:49 2007 -0500
+
+    include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Tue Jul 10 09:02:57 2007 -0500
+
+    include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
+
+    Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
+    used to be included but CONFIG_BOOTP_MASK was not defined.
+
+    Remove lingering references to CFG_CMD_* symbols.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 22:08:34 2007 -0500
+
+    Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
+
+    All of the choices for CONFIG_BOOTP_ are now documented in
+    the README file.  You must now individually select exactly
+    the set that you want using a series of
+	#define CONFIG_BOOTP_<x>
+    statements in the board port config files now.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d3b8c1a743dcd31625c99e6a44590f207eb00028
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:57:31 2007 -0500
+
+    include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2fd90ce575b02d189cbf443c85309bcd001aa393
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:48:26 2007 -0500
+
+    include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37d4bb70586659dedef1658ce1bed071be098aec
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:38:02 2007 -0500
+
+    include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 18225e8dd1950bd6dbf35011e436db7f474c187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:31:24 2007 -0500
+
+    include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:24:19 2007 -0500
+
+    include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 21:16:53 2007 -0500
+
+    include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 19:12:30 2007 -0500
+
+    Retire CONFIG_COMMANDS finally.
+    Strip old CFG_CMD_* symbols out.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b5501f7d720fed99ab0b42c83f5dea52868ce007
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 19:10:03 2007 -0500
+
+    Update README.* to reference new CONFIG_CMD_* names now.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 19:06:00 2007 -0500
+
+    cpu/m*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:57:22 2007 -0500
+
+    cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab3abcbabd840928fb1eb5122118ca466b5e5013
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:45:16 2007 -0500
+
+    board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:38:39 2007 -0500
+
+    board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c508a4cefd8a953fc64957650506a035e6e3d9d1
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:31:28 2007 -0500
+
+    board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:24:55 2007 -0500
+
+    board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fcec2eb93e126400009729328e797f12bc94f1fd
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:19:09 2007 -0500
+
+    board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a593814f2be0c9cdc3133cd550b167b8a988328f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:10:50 2007 -0500
+
+    rtc/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 67350568f9d46e66c21829f3513b3db0caeb948b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:05:38 2007 -0500
+
+    lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 7def6b34f910f08d7ef0a14646da067719237ca2
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 18:02:11 2007 -0500
+
+    lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:56:50 2007 -0500
+
+    fs/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c91898bbc505aff3e12a807af88e76da18efb7ee
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:46:09 2007 -0500
+
+    tools/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:45:14 2007 -0500
+
+    net/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:39:42 2007 -0500
+
+    drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:30:01 2007 -0500
+
+    drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:22:37 2007 -0500
+
+    disk/: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 639221c76c88215bd55af83ad174fc30d1940f8f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Mon Jul 9 17:15:49 2007 -0500
+
+    include/: Remove obsolete references to CONFIG_COMMANDS
+    Mostly removed from comments here.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue Jul 10 00:01:28 2007 +0200
+
+    Coding style cleanup; update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c3517f919d0f61650cf3027fd4faf0f631142f6c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 18:10:08 2007 -0500
+
+    common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 18:05:39 2007 -0500
+
+    common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit c76fe47425afc7d5d670ff0539823c85d65d9c42
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 18:02:23 2007 -0500
+
+    common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit baa26db4113679b80970ff447d91cc10217742a6
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 17:51:39 2007 -0500
+
+    common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 17:02:01 2007 -0500
+
+    Clear up confusion over the CMD_POST and POST_DIAG mess.
+
+    For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
+    when it really means just CONFIG_CMD_DIAG.	There is no CMD_POST.
+    Clear this mess up some.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b3631487105a57ab7cbadfc26efbaf9676275018
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 15:45:08 2007 -0500
+
+    Remove references to the old cmd_confdefs.h include file.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 15:42:59 2007 -0500
+
+    include/configs: Catch some CONFIG_CMD_* conversion stragglers.
+
+    Use new CONFIG_CMD_* in lwmon5.h board config file.
+    Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5562901661bd428f7e5feb333f796372cb81019
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 15:31:57 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 15:02:44 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various S* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 15:12:40 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various R* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 14:55:07 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 14:49:44 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various P* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 14:21:43 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 14:14:17 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various M* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 348f258f24253433e4a2302a0bbceb6740a67246
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 13:46:18 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sun Jul 8 10:09:35 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various H* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 60a0876b5106b34220e459c208bbf648073306c0
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sat Jul 7 21:04:26 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit dcaa71562826a2466e894c868d132509dcda8444
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sat Jul 7 20:56:05 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various E* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 3c3227f3c737502311b25b72084573901cbbf17d
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Sat Jul 7 20:40:43 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various D* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Jul 5 19:52:35 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various C* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Jul 5 19:32:07 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various B* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 498ff9a228485bd4b9f23d066bada268f9add1dd
+Author: Jon Loeliger <jdl@freescale.com>
+Date:	Thu Jul 5 19:13:52 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various A* named board config files.
+
+    Since ADS860.h includes "board/fads/fads.h" with ramifications
+    on the CONFIG_COMMAND treatment, it too has to be adjusted to
+    exclude already configured commands in this same commit.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
+Author: Stefan Roese <sr@denx.de>
+Date:	Fri Jul 6 09:45:47 2007 +0200
+
+    Fix problem with get/setdcr commands introduced by cfg patches
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri Jul 6 02:50:19 2007 +0200
+
+    Code cleanup and default config update for STC GP3 SSA board.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e4dbe1b215f5c6c462e76909d240bd96472b84de
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Jul 5 17:56:27 2007 +0200
+
+    Fixing some typos etc. introduced mainly by cfg patches.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu Jul 5 11:12:16 2007 +0200
+
+    Minor coding style cleanup. Update CHANGELOG.
+
+commit dca3b3d6d6396b67e5e84af53452164923c73443
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:46 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:38 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:30 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various s* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:23 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 26a34560d56a9df5bc2ae23525d9229736134757
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:17 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various p* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a5cb23092a7d31490a33d4ec871468b63babfa3c
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:13 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various o* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:07 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various n* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:33:01 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various m* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:57 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various l* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:51 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:32 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various i* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:25 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various h* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:19 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various g* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:10 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various e* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:32:03 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various d* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:56 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various c* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:49 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various b* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0b361c916617aff79e647b40f0e43361e0bbaccf
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:42 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various a* named board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b730cda82e362df6a22f4c59c0a9b97e885b1014
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:35 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d794cfefead5fc177cf4f41164e80382e9c9484a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:15 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:31:07 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in STx board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:30:58 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in sbc* board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2694690e285acaa34922f55f4b5ae030da60c55a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:30:50 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in TQM board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 1cc4c458329765b58e584a19821e796b3c10e976
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:30:28 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in 82xx board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jul 4 22:30:06 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in 83xx board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b44896215a09c60fa40cae906f7ed207bbc2c492
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date:	Thu Jul 5 08:17:37 2007 +0200
+
+    Merged POST framework with the current TOT.
+
+    Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
+
+commit b24629fa377214d63bb40d1360e354b6d3e4af56
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jun 13 13:23:15 2007 -0500
+
+    mpc86xx: Remove old CFG_CMD_* references.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jun 13 13:22:54 2007 -0500
+
+    Add MPC8568MDS to MAKEALL 85xx target.
+
+    It was missing from the original port submission.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jun 13 13:22:08 2007 -0500
+
+    include/configs: Use new CONFIG_CMD_* in 85xx board config files.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 56b304ac2091689506088a9ae67f63fd6300cf16
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Wed Jun 13 13:21:37 2007 -0500
+
+    Fix #if typo in CONFIG_CMD_* changes.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f780b83316d9af1f61d71cc88b1917b387b9b995
+Author: Niklaus Giger <niklausgiger@gmx.ch>
+Date:	Wed Jun 27 18:11:38 2007 +0200
+
+    resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
+
+    Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
+
+commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed Jul 4 10:06:30 2007 +0200
+
+    ppc4xx: Update lwmon5 board
+
+    - Add optional ECC generation routine to preserve existing
+      RAM values. This is needed for the Linux log-buffer support
+    - Add optional DDR2 setup with CL=4
+    - GPIO50 not used anymore
+    - Lime register setup added
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6810a34677dbc446334f5e451f1682426dd33b49
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:17:28 2007 -0600
+
+    Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:17:28 2007 -0600
+
+    Fix Makefile to use $(MKCONFIG) macro for all board ports
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 057004f4a4863554d56cc56268bfa7c7d9738e27
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:49 2007 -0600
+
+    Correct fixup relocation for mpc83xx
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:44 2007 -0600
+
+    Correct fixup relocation for mpc8260
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f3a52fe05923935db86985daf9438e2f70ac39aa
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:39 2007 -0600
+
+    Correct fixup relocation for mpc824x
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:34 2007 -0600
+
+    Correct fixup relocation for mpc8220
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:29 2007 -0600
+
+    Correct fixup relocation for MPC5xxx
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 3649cd99ba815b6601868735765602f00ef3692b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:24 2007 -0600
+
+    Correct relocation fixup for mpc5xx
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:19 2007 -0600
+
+    Don't set gd->reloc_off if relocation of .fixup works correctly
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:14 2007 -0600
+
+    Remove obsolete mpc83xx linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:09 2007 -0600
+
+    Consolidate mpc8260 linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:34:04 2007 -0600
+
+    Remove obsolete mpc824x linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:59 2007 -0600
+
+    Remove obsolete mpc824x linker scripts (3 of 4)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit a71c084f3ac7fedf144537db2b2da47323068833
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:53 2007 -0600
+
+    Remove obsolete mpc824x linker scripts (2 of 4)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f670a15468d1365241d40022b9408e1004181f5e
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:48 2007 -0600
+
+    Remove obsolete mpc824x linker scripts (1 of 4)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 09555bd45a04c0e54f172528d21bc18896550d28
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:43 2007 -0600
+
+    Remove obsolete mpc8220 linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5efb992f046e51225c93d52f80fecbe433abd789
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:38 2007 -0600
+
+    Remove obsolete mpc5xxx linker scripts (3 of 3)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 07c13dfef65b31647e69d8b61daa1eec598add1a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:33 2007 -0600
+
+    Remove obsolete mpc5xxx linker scripts (2 of 3)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:28 2007 -0600
+
+    Remove obsolete mpc5xxx linker scripts (1 of 3)
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit b7d8e05f8675249b5f208aa73babeed384a4519d
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:23 2007 -0600
+
+    Remove obsolete mpc5xx linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:18 2007 -0600
+
+    Consolidate mpc83xx linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:13 2007 -0600
+
+    Consolidate mpc8260 linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:08 2007 -0600
+
+    Consolidate mpc824x linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 9c757b789a59a855db57b448dd825329c4e9c4a0
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:33:03 2007 -0600
+
+    Consolidate mpc8220 linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit d181c9a15cd41863fe24840d17848429f27d3c8c
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:32:58 2007 -0600
+
+    Consolidate mpc5xxx linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 287ac924adb7291bebe5086652a362a30ab28b13
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date:	Tue Jul 3 00:32:53 2007 -0600
+
+    Consolidate mpc5xx linker scripts
+
+    Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jul 4 00:43:53 2007 +0200
+
+    Fix a few file permission problems.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed Jul 4 00:38:38 2007 +0200
+
+    Minor coding style cleanup. Rebuild CHANGELOG file.
+
+commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:44 2007 -0500
+
+    configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 602ad3b33d9ceef83dbab46be68646d645d637ee
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:39 2007 -0500
+
+    README: Rewrite command line config to use CONFIG_CMD_* names.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 72a074cec68e5bad60d63206c050974e08afd804
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:34 2007 -0500
+
+    include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:28 2007 -0500
+
+    tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 9107ebe0d352420895ab69b715697bdebc8caf50
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:23 2007 -0500
+
+    board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 5e378003d592ea828ec69d6defcd4de79096dd5c
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:19 2007 -0500
+
+    board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 737184114ec9c9e0ab94d6713536126073bd2472
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:15 2007 -0500
+
+    cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit f48070fe5fe440dfb5ee5268c920de70e48ea327
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:08 2007 -0500
+
+    cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:03:03 2007 -0500
+
+    lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:58 2007 -0500
+
+    lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 98b79003c21c2578206003256de4e781d6b36ca8
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:53 2007 -0500
+
+    rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 6e2115acb6a892d53a6881bf253ae41d3df39156
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:49 2007 -0500
+
+    net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 45cdb9b72c94655c7308b464a2666057c0b286e0
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:34 2007 -0500
+
+    disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:20 2007 -0500
+
+    fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit d5be43de93ff905c465e509d45a3164ef48d26e7
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:10 2007 -0500
+
+    drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit b453960d4fdb87b3970d96119b90df2ed024fc4a
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:02:05 2007 -0500
+
+    common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:01:54 2007 -0500
+
+    common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit a76adc8142c1d956385a109e0b70f9319ede4d66
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:01:43 2007 -0500
+
+    common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
+
+    This is a compatibility step that allows both the older form
+    and the new form to co-exist for a while until the older can
+    be removed entirely.
+
+    All transformations are of the form:
+    Before:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
+    After:
+	#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
+
+commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
+Author: Jon Loeliger <jdl@jdl.com>
+Date:	Mon Jun 11 19:01:34 2007 -0500
+
+    Introduce initial versions of new Command Config files.
+
+    Derive three new files from cmd_confdefs.h:
+	config_bootp.h - Has BOOTP related config options, not commands
+	config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
+	config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
+
+    For now, include "config_bootp.h" for compatability until all
+    users of it directly include it properly.
+
+    Signed-off-by: Jon Loeliger <jdl@freescale.com>
 
 commit 1f2a05898658900dc5717761e27abf2052e67e13
 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>

MAKEALL

@@ -35,7 +35,7 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	BC3450		cm1_qp1		cpci5200	EVAL5200	\
+	BC3450		cm5200		cpci5200	EVAL5200	\
 	fo300		icecube_5100	icecube_5200	lite5200b	\
 	mcc200		mecp5200	motionpro	o2dnt		\
 	pf5200		PM520		TB5200		Total5100	\
@@ -141,8 +141,9 @@ LIST_8260="	\
 #########################################################################
 
 LIST_83xx="	\
-	MPC8313ERDB	MPC832XEMDS	MPC8349EMDS	MPC8349ITX	\
-	MPC8349ITXGP	MPC8360EMDS	sbc8349		TQM834x		\
+	MPC8313ERDB_33	MPC8313ERDB_66	MPC832XEMDS	MPC8349EMDS	\
+	MPC8349ITX	MPC8349ITXGP	MPC8360EMDS	sbc8349		\
+	TQM834x								\
 "
 
 
@@ -152,10 +153,10 @@ LIST_83xx="	\
 
 LIST_85xx="	\
 	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8544DS	\
-	MPC8548CDS	MPC8555CDS	MPC8560ADS	PM854		\
-	PM856		sbc8540		sbc8560		stxgp3		\
-	stxssa		TQM8540		TQM8541		TQM8555		\
-	TQM8560								\
+	MPC8548CDS	MPC8555CDS	MPC8560ADS	MPC8568MDS	\
+	PM854		PM856		sbc8540		sbc8560		\
+	stxgp3		stxssa		TQM8540		TQM8541		\
+	TQM8555		TQM8560						\
 "
 
 #########################################################################

Makefile

@@ -206,6 +206,7 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/bios_emulator/libatibiosemu.a
 LIBS += drivers/nand/libnand.a
 LIBS += drivers/nand_legacy/libnand_legacy.a
 LIBS += drivers/net/libnetdrv.a
@@ -431,7 +432,7 @@ jupiter_config:         unconfig
 	@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 
 v38b_config: unconfig
-	@./mkconfig -a v38b ppc mpc5xxx v38b
+	@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 
 inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
@@ -534,13 +535,8 @@ PM520_ROMBOOT_DDR_config:	unconfig
 smmaco4_config: unconfig
 	@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
-cm1_qp1_config:	unconfig
-	@ >include/config.h
-	@[ -z "$(findstring cm1_qp1,$@)" ] || \
-		{  echo "... with 64 MByte SDRAM" ; \
-		  echo "... with 32 MByte Flash" ; \
-		}
-	@./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1
+cm5200_config:	unconfig
+	@./mkconfig -a cm5200 ppc mpc5xxx cm5200
 
 spieval_config:	unconfig
 	@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
@@ -1037,9 +1033,8 @@ acadia_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
 
 acadia_nand_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/acadia
+	@mkdir -p $(obj)include $(obj)board/amcc/acadia
+	@mkdir -p $(obj)nand_spl/board/amcc/acadia
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@@ -1049,7 +1044,7 @@ ADCIOP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
 alpr_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
 
 AP1000_config:unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1067,9 +1062,8 @@ bamboo_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
 
 bamboo_nand_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/bamboo
+	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
+	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
 	@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@@ -1250,9 +1244,8 @@ rainier_config: unconfig
 
 sequoia_nand_config \
 rainier_nand_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)nand_spl
-	@mkdir -p $(obj)board/amcc/sequoia
+	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
+	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
 	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
 	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
 		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@@ -1261,7 +1254,7 @@ rainier_nand_config: unconfig
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sc3_config:unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx sc3
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
 
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
@@ -1427,7 +1420,7 @@ ep8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
 
 ep82xxm_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
+	@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
 
 gw8260_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
@@ -1668,14 +1661,15 @@ r5200_config :		unconfig
 
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config: unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define CFG_33MHZ" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define CFG_66MHZ" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
 
@@ -1683,23 +1677,24 @@ MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
 MPC832XEMDS_SLAVE_config:	unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo -n "... PCI HOST " ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
 		echo "...PCI SLAVE 66M"  ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define PCI_33M" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define PCI_66M" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
 
@@ -1724,23 +1719,24 @@ MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
 MPC8360EMDS_SLAVE_config:	unconfig
-	@echo "" >include/config.h ; \
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo -n "... PCI HOST " ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
+		echo "... PCI HOST " ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
 		echo "...PCI SLAVE 66M"  ; \
-		echo "#define CONFIG_PCI" >>include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "...33M ..." ; \
-		echo "#define PCI_33M" >>include/config.h ; \
+		echo "...33M ..." ; \
+		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo -n "...66M..." ; \
-		echo "#define PCI_66M" >>include/config.h ; \
+		echo "...66M..." ; \
+		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
 
@@ -1766,10 +1762,10 @@ MPC8540EVAL_66_slave_config:      unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo -n "... 33 MHz PCI" ; \
+		echo "... 33 MHz PCI" ; \
 	else \
 		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-		echo -n "... 66 MHz PCI" ; \
+		echo "... 66 MHz PCI" ; \
 	fi ; \
 	if [ "$(findstring _slave_,$@)" ] ; then \
 		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
@@ -1863,7 +1859,7 @@ TQM8560_config:		unconfig
 #########################################################################
 
 MPC8641HPCN_config:    unconfig
-	@./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+	@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn
 
 
 #########################################################################
@@ -2030,13 +2026,13 @@ omap1610h2_cs3boot_config \
 omap1610h2_cs_autoboot_config:	unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring _cs0boot_, $@)" ] ; then \
-		echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+		echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
 		echo "... configured for CS0 boot"; \
 	elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
-		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+		echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
 		echo "... configured for CS_AUTO boot"; \
 	else \
-		echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+		echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
 		echo "... configured for CS3 boot"; \
 	fi;
 	@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@@ -2205,11 +2201,12 @@ logodl_config	:	unconfig
 
 pdnb3_config \
 scpu_config:    unconfig
+	@mkdir -p $(obj)include
 	@if [ "$(findstring scpu_,$@)" ] ; then \
-		echo "#define CONFIG_SCPU"      >>include/config.h ; \
+		echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
 		echo "... on SCPU board variant" ; \
 	else \
-		>include/config.h ; \
+		>$(obj)include/config.h ; \
 	fi
 	@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
 
@@ -2431,14 +2428,16 @@ suzaku_config:	unconfig
 	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 ml401_config:	unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_ML401 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+	@mkdir -p $(obj)include
+	@ >$(obj)include/config.h
+	@echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
+	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
 
 xupv2p_config:	unconfig
-	@ >include/config.h
-	@echo "#define CONFIG_XUPV2P 1" >> include/config.h
-	@./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+	@mkdir -p $(obj)include
+	@ >$(obj)include/config.h
+	@echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
+	@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
 
 #########################################################################
 ## Blackfin
@@ -2463,7 +2462,7 @@ bf561-ezkit_config:	unconfig
 #########################################################################
 
 atstk1002_config	:	unconfig
-	@./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+	@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
 
 #########################################################################
 #########################################################################

README

@@ -541,7 +541,7 @@ The following options need to be configured:
 			CFG_CONSOLE_BLINK_COUNT blink interval (cf. i8042.c)
 			CONFIG_CONSOLE_TIME	display time/date info in
 						upper right corner
-						(requires CFG_CMD_DATE)
+						(requires CONFIG_CMD_DATE)
 			CONFIG_VIDEO_LOGO	display Linux logo in
 						upper left corner
 			CONFIG_VIDEO_BMP_LOGO	use bmp_logo.h instead of
@@ -645,103 +645,96 @@ The following options need to be configured:
 		time on others. This setting #define's the initial
 		value of the "loads_echo" environment variable.
 
-- Kgdb Serial Baudrate: (if CFG_CMD_KGDB is defined)
+- Kgdb Serial Baudrate: (if CONFIG_CMD_KGDB is defined)
 		CONFIG_KGDB_BAUDRATE
 		Select one of the baudrates listed in
 		CFG_BAUDRATE_TABLE, see below.
 
 - Monitor Functions:
-		CONFIG_COMMANDS
-		Most monitor functions can be selected (or
-		de-selected) by adjusting the definition of
-		CONFIG_COMMANDS; to select individual functions,
-		#define CONFIG_COMMANDS by "OR"ing any of the
-		following values:
-
-		#define enables commands:
-		-------------------------
-		CFG_CMD_ASKENV	* ask for env variable
-		CFG_CMD_AUTOSCRIPT Autoscript Support
-		CFG_CMD_BDI	  bdinfo
-		CFG_CMD_BEDBUG	* Include BedBug Debugger
-		CFG_CMD_BMP	* BMP support
-		CFG_CMD_BSP	* Board specific commands
-		CFG_CMD_BOOTD	  bootd
-		CFG_CMD_CACHE	* icache, dcache
-		CFG_CMD_CONSOLE	  coninfo
-		CFG_CMD_DATE	* support for RTC, date/time...
-		CFG_CMD_DHCP	* DHCP support
-		CFG_CMD_DIAG	* Diagnostics
-		CFG_CMD_DOC	* Disk-On-Chip Support
-		CFG_CMD_DTT	* Digital Therm and Thermostat
-		CFG_CMD_ECHO	  echo arguments
-		CFG_CMD_EEPROM	* EEPROM read/write support
-		CFG_CMD_ELF	* bootelf, bootvx
-		CFG_CMD_ENV	  saveenv
-		CFG_CMD_FDC	* Floppy Disk Support
-		CFG_CMD_FAT	* FAT partition support
-		CFG_CMD_FDOS	* Dos diskette Support
-		CFG_CMD_FLASH	  flinfo, erase, protect
-		CFG_CMD_FPGA	  FPGA device initialization support
-		CFG_CMD_HWFLOW	* RTS/CTS hw flow control
-		CFG_CMD_I2C	* I2C serial bus support
-		CFG_CMD_IDE	* IDE harddisk support
-		CFG_CMD_IMI	  iminfo
-		CFG_CMD_IMLS	  List all found images
-		CFG_CMD_IMMAP	* IMMR dump support
-		CFG_CMD_IRQ	* irqinfo
-		CFG_CMD_ITEST	  Integer/string test of 2 values
-		CFG_CMD_JFFS2	* JFFS2 Support
-		CFG_CMD_KGDB	* kgdb
-		CFG_CMD_LOADB	  loadb
-		CFG_CMD_LOADS	  loads
-		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
-				  loop, loopw, mtest
-		CFG_CMD_MISC	  Misc functions like sleep etc
-		CFG_CMD_MMC	* MMC memory mapped support
-		CFG_CMD_MII	* MII utility commands
-		CFG_CMD_NAND	* NAND support
-		CFG_CMD_NET	  bootp, tftpboot, rarpboot
-		CFG_CMD_PCI	* pciinfo
-		CFG_CMD_PCMCIA	* PCMCIA support
-		CFG_CMD_PING	* send ICMP ECHO_REQUEST to network host
-		CFG_CMD_PORTIO	* Port I/O
-		CFG_CMD_REGINFO * Register dump
-		CFG_CMD_RUN	  run command in env variable
-		CFG_CMD_SAVES	* save S record dump
-		CFG_CMD_SCSI	* SCSI Support
-		CFG_CMD_SDRAM	* print SDRAM configuration information
-				  (requires CFG_CMD_I2C)
-		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
-		CFG_CMD_SPI	* SPI serial bus support
-		CFG_CMD_USB	* USB support
-		CFG_CMD_VFD	* VFD support (TRAB)
-		CFG_CMD_BSP	* Board SPecific functions
-		CFG_CMD_CDP	* Cisco Discover Protocol support
-		CFG_CMD_FSL	* Microblaze FSL support
-		-----------------------------------------------
-		CFG_CMD_ALL	all
-
-		CONFIG_CMD_DFL	Default configuration; at the moment
-				this is includes all commands, except
-				the ones marked with "*" in the list
-				above.
-
-		If you don't define CONFIG_COMMANDS it defaults to
-		CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can
-		override the default settings in the respective
-		include file.
+		Monitor commands can be included or excluded
+		from the build by using the #include files
+		"config_cmd_all.h" and #undef'ing unwanted
+		commands, or using "config_cmd_default.h"
+		and augmenting with additional #define's
+		for wanted commands.
+
+		The default command configuration includes all commands
+		except those marked below with a "*".
+
+		CONFIG_CMD_ASKENV	* ask for env variable
+		CONFIG_CMD_AUTOSCRIPT	  Autoscript Support
+		CONFIG_CMD_BDI		  bdinfo
+		CONFIG_CMD_BEDBUG	* Include BedBug Debugger
+		CONFIG_CMD_BMP		* BMP support
+		CONFIG_CMD_BSP		* Board specific commands
+		CONFIG_CMD_BOOTD	  bootd
+		CONFIG_CMD_CACHE	* icache, dcache
+		CONFIG_CMD_CONSOLE	  coninfo
+		CONFIG_CMD_DATE		* support for RTC, date/time...
+		CONFIG_CMD_DHCP		* DHCP support
+		CONFIG_CMD_DIAG		* Diagnostics
+		CONFIG_CMD_DOC		* Disk-On-Chip Support
+		CONFIG_CMD_DTT		* Digital Therm and Thermostat
+		CONFIG_CMD_ECHO		  echo arguments
+		CONFIG_CMD_EEPROM	* EEPROM read/write support
+		CONFIG_CMD_ELF		* bootelf, bootvx
+		CONFIG_CMD_ENV		  saveenv
+		CONFIG_CMD_FDC		* Floppy Disk Support
+		CONFIG_CMD_FAT		* FAT partition support
+		CONFIG_CMD_FDOS		* Dos diskette Support
+		CONFIG_CMD_FLASH	  flinfo, erase, protect
+		CONFIG_CMD_FPGA		  FPGA device initialization support
+		CONFIG_CMD_HWFLOW	* RTS/CTS hw flow control
+		CONFIG_CMD_I2C		* I2C serial bus support
+		CONFIG_CMD_IDE		* IDE harddisk support
+		CONFIG_CMD_IMI		  iminfo
+		CONFIG_CMD_IMLS		  List all found images
+		CONFIG_CMD_IMMAP	* IMMR dump support
+		CONFIG_CMD_IRQ		* irqinfo
+		CONFIG_CMD_ITEST	  Integer/string test of 2 values
+		CONFIG_CMD_JFFS2	* JFFS2 Support
+		CONFIG_CMD_KGDB		* kgdb
+		CONFIG_CMD_LOADB	  loadb
+		CONFIG_CMD_LOADS	  loads
+		CONFIG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
+					  loop, loopw, mtest
+		CONFIG_CMD_MISC		  Misc functions like sleep etc
+		CONFIG_CMD_MMC		* MMC memory mapped support
+		CONFIG_CMD_MII		* MII utility commands
+		CONFIG_CMD_NAND		* NAND support
+		CONFIG_CMD_NET		  bootp, tftpboot, rarpboot
+		CONFIG_CMD_PCI		* pciinfo
+		CONFIG_CMD_PCMCIA		* PCMCIA support
+		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
+					  host
+		CONFIG_CMD_PORTIO	* Port I/O
+		CONFIG_CMD_REGINFO	* Register dump
+		CONFIG_CMD_RUN		  run command in env variable
+		CONFIG_CMD_SAVES	* save S record dump
+		CONFIG_CMD_SCSI		* SCSI Support
+		CONFIG_CMD_SDRAM	* print SDRAM configuration information
+					  (requires CONFIG_CMD_I2C)
+		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
+					  (4xx only)
+		CONFIG_CMD_SPI		* SPI serial bus support
+		CONFIG_CMD_USB		* USB support
+		CONFIG_CMD_VFD		* VFD support (TRAB)
+		CONFIG_CMD_BSP		* Board SPecific functions
+		CONFIG_CMD_CDP		* Cisco Discover Protocol support
+		CONFIG_CMD_FSL		* Microblaze FSL support
+
 
 		EXAMPLE: If you want all functions except of network
 		support you can write:
 
-		#define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
+		#include "config_cmd_all.h"
+		#undef CONFIG_CMD_NET
 
 	Other Commands:
 		fdt (flattened device tree) command: CONFIG_OF_LIBFDT
 
 	Note:	Don't enable the "icache" and "dcache" commands
-		(configuration option CFG_CMD_CACHE) unless you know
+		(configuration option CONFIG_CMD_CACHE) unless you know
 		what you (and your U-Boot users) are doing. Data
 		cache cannot be enabled on systems like the 8xx or
 		8260 (where accesses to the IMMR region must be
@@ -769,7 +762,7 @@ The following options need to be configured:
 
 - Real-Time Clock:
 
-		When CFG_CMD_DATE is selected, the type of the RTC
+		When CONFIG_CMD_DATE is selected, the type of the RTC
 		has to be selected, too. Define exactly one of the
 		following options:
 
@@ -790,14 +783,14 @@ The following options need to be configured:
 		When CONFIG_TIMESTAMP is selected, the timestamp
 		(date and time) of an image is printed by image
 		commands like bootm or iminfo. This option is
-		automatically enabled when you select CFG_CMD_DATE .
+		automatically enabled when you select CONFIG_CMD_DATE .
 
 - Partition Support:
 		CONFIG_MAC_PARTITION and/or CONFIG_DOS_PARTITION
 		and/or CONFIG_ISO_PARTITION
 
-		If IDE or SCSI support	is  enabled  (CFG_CMD_IDE  or
-		CFG_CMD_SCSI) you must configure support for at least
+		If IDE or SCSI support	is  enabled  (CONFIG_CMD_IDE or
+		CONFIG_CMD_SCSI) you must configure support for at least
 		one partition type as well.
 
 - IDE Reset method:
@@ -907,8 +900,8 @@ The following options need to be configured:
 		enable this define CONFIG_MMC. The MMC can be
 		accessed from the boot prompt by mapping the device
 		to physical memory similar to flash. Command line is
-		enabled with CFG_CMD_MMC. The MMC driver also works with
-		the FAT fs. This is enabled with CFG_CMD_FAT.
+		enabled with CONFIG_CMD_MMC. The MMC driver also works with
+		the FAT fs. This is enabled with CONFIG_CMD_FAT.
 
 - Journaling Flash filesystem support:
 		CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
@@ -1123,7 +1116,7 @@ The following options need to be configured:
 		boot, thus flooding the BOOTP server. Defining
 		CONFIG_BOOTP_RANDOM_DELAY causes a random delay to be
 		inserted before sending out BOOTP requests. The
-		following delays are insterted then:
+		following delays are inserted then:
 
 		1st BOOTP request:	delay 0 ... 1 sec
 		2nd BOOTP request:	delay 0 ... 2 sec
@@ -1132,10 +1125,21 @@ The following options need to be configured:
 		BOOTP requests:		delay 0 ... 8 sec
 
 - DHCP Advanced Options:
-		CONFIG_BOOTP_MASK
-
-		You can fine tune the DHCP functionality by adding
-		these flags to the CONFIG_BOOTP_MASK define:
+		You can fine tune the DHCP functionality by defining
+		CONFIG_BOOTP_* symbols:
+
+		CONFIG_BOOTP_SUBNETMASK
+		CONFIG_BOOTP_GATEWAY
+		CONFIG_BOOTP_HOSTNAME
+		CONFIG_BOOTP_NISDOMAIN
+		CONFIG_BOOTP_BOOTPATH
+		CONFIG_BOOTP_BOOTFILESIZE
+		CONFIG_BOOTP_DNS
+		CONFIG_BOOTP_DNS2
+		CONFIG_BOOTP_SEND_HOSTNAME
+		CONFIG_BOOTP_NTPSERVER
+		CONFIG_BOOTP_TIMEOFFSET
+		CONFIG_BOOTP_VENDOREX
 
 		CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
 		serverip from a DHCP server, it is possible that more
@@ -1144,15 +1148,14 @@ The following options need to be configured:
 		serverip will be stored in the additional environment
 		variable "dnsip2". The first DNS serverip is always
 		stored in the variable "dnsip", when CONFIG_BOOTP_DNS
-		is added to the CONFIG_BOOTP_MASK.
+		is defined.
 
 		CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable
 		to do a dynamic update of a DNS server. To do this, they
 		need the hostname of the DHCP requester.
-		If CONFIG_BOOP_SEND_HOSTNAME is added to the
-		CONFIG_BOOTP_MASK, the content of the "hostname"
-		environment variable is passed as option 12 to
-		the DHCP server.
+		If CONFIG_BOOP_SEND_HOSTNAME is defined, the content
+		of the "hostname" environment variable is passed as
+		option 12 to the DHCP server.
 
  - CDP Options:
 		CONFIG_CDP_DEVICE_ID
@@ -1220,7 +1223,7 @@ The following options need to be configured:
 		include the appropriate I2C driver for the selected cpu.
 
 		This will allow you to use i2c commands at the u-boot
-		command line (as long as you set CFG_CMD_I2C in
+		command line (as long as you set CONFIG_CMD_I2C in
 		CONFIG_COMMANDS) and communicate with i2c based realtime
 		clock chips. See common/cmd_i2c.c for a description of the
 		command line interface.
@@ -2369,7 +2372,7 @@ Low Level (hardware related) configuration options:
 
 - CONFIG_LOOPW
 		Add the "loopw" memory command. This only takes effect if
-		the memory commands are activated globally (CFG_CMD_MEM).
+		the memory commands are activated globally (CONFIG_CMD_MEM).
 
 - CONFIG_MX_CYCLIC
 		Add the "mdc" and "mwc" memory commands. These are cyclic
@@ -2383,7 +2386,7 @@ Low Level (hardware related) configuration options:
 		This command will write 12345678 to address 100 all 10 ms.
 
 		This only takes effect if the memory commands are activated
-		globally (CFG_CMD_MEM).
+		globally (CONFIG_CMD_MEM).
 
 - CONFIG_SKIP_LOWLEVEL_INIT
 - CONFIG_SKIP_RELOCATE_UBOOT

board/MAI/AmigaOneG3SE/AmigaOneG3SE.c

@@ -30,49 +30,49 @@
 #include "memio.h"
 #include "via686.h"
 
-__asm(" .globl send_kb                                      \n
-	send_kb:                                            \n
-		lis     r9, 0xfe00                          \n
-							    \n
-		li      r4, 0x10        # retries           \n
-		mtctr   r4                                  \n
-							    \n
-	idle:                                               \n
-		lbz     r4, 0x64(r9)                        \n
-		andi.   r4, r4, 0x02                        \n
-		bne     idle                                \n
-							    \n
-	ready:                                              \n
-		stb     r3, 0x60(r9)                        \n
-							    \n
-	check:                                              \n
-		lbz     r4, 0x64(r9)                        \n
-		andi.   r4, r4, 0x01                        \n
-		beq     check                               \n
-							    \n
-		lbz     r4, 0x60(r9)                        \n
-		cmpwi   r4, 0xfa                            \n
-		beq     done                                \n
-							    \n
-		bdnz    idle                                \n
-							    \n
-		li      r3, 0                               \n
-		blr                                         \n
-							    \n
-	done:                                               \n
-		li      r3, 1                               \n
-		blr                                         \n
-							    \n
-	.globl test_kb                                      \n
-	test_kb:                                            \n
-		mflr    r10                                 \n
-		li      r3, 0xed                            \n
-		bl      send_kb                             \n
-		li      r3, 0x01                            \n
-		bl      send_kb                             \n
-		mtlr    r10                                 \n
-		blr                                         \n
-");
+__asm__(" .globl send_kb                   		    \n "
+	"send_kb:                                           \n "
+	"	lis     r9, 0xfe00                          \n "
+	"						    \n "
+	"	li      r4, 0x10        # retries           \n "
+	"	mtctr   r4                                  \n "
+	"						    \n "
+	"idle:                                              \n "
+	"	lbz     r4, 0x64(r9)                        \n "
+	"	andi.   r4, r4, 0x02                        \n "
+	"	bne     idle                                \n "
+
+	"ready:                                             \n "
+	"	stb     r3, 0x60(r9)                        \n "
+	"						    \n "
+	"check:                                             \n "
+	"	lbz     r4, 0x64(r9)                        \n "
+	"	andi.   r4, r4, 0x01                        \n "
+	"	beq     check                               \n "
+	"						    \n "
+	"	lbz     r4, 0x60(r9)                        \n "
+	"	cmpwi   r4, 0xfa                            \n "
+	"	beq     done                                \n "
+
+	"	bdnz    idle                                \n "
+
+	"	li      r3, 0                               \n "
+	"	blr                                         \n "
+
+	"done:                                              \n "
+	"	li      r3, 1                               \n "
+	"	blr                                         \n "
+
+	".globl test_kb                                     \n "
+	"test_kb:                                           \n "
+	"	mflr    r10                                 \n "
+	"	li      r3, 0xed                            \n "
+	"	bl      send_kb                             \n "
+	"	li      r3, 0x01                            \n "
+	"	bl      send_kb                             \n "
+	"	mtlr    r10                                 \n "
+	"	blr                                         "
+);
 
 
 int checkboard (void)

board/MAI/AmigaOneG3SE/cmd_boota.c

@@ -119,7 +119,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	return 0;
 }
-#if defined(CONFIG_AMIGAONEG3SE) && (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
 U_BOOT_CMD(
 	boota,   3,      1,      do_boota,
 	"boota   - boot an Amiga kernel\n",

board/MAI/AmigaOneG3SE/video.c

@@ -56,6 +56,7 @@ int  video_rows(void);
 int  video_cols(void);
 
 char *prompt_string = "=>";
+unsigned char video_get_attr(void);
 
 void video_set_color(unsigned char attr)
 {

board/MAI/bios_emulator/bios.c

@@ -1,335 +0,0 @@
-/*
- * Mostly done after the Scitech Bios emulation
- * Written by Hans-Jörg Frieden
- * Hyperion Entertainment
- */
-#include "x86emu.h"
-#include "glue.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define PRINTF(fmt, args...) printf(fmt, ## args)
-#else
-#define PRINTF(fmt, args...)
-#endif
-
-#define BIOS_SEG 0xFFF0
-#define PCIBIOS_SUCCESSFUL 0
-#define PCIBIOS_DEVICE_NOT_FOUND 0x86
-
-typedef unsigned char UBYTE;
-typedef unsigned short UWORD;
-typedef unsigned long ULONG;
-
-typedef char BYTE;
-typedef short WORT;
-typedef long LONG;
-
-static inline UBYTE read_byte(volatile UBYTE* from)
-{
-    int x;
-    asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UBYTE)x;
-}
-
-static inline void write_byte(volatile UBYTE *to, int x)
-{
-    asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline UWORD read_word_little(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from));
-    return (UWORD)x;
-}
-
-static inline UWORD read_word_big(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UWORD)x;
-}
-
-static inline void write_word_little(volatile UWORD *to, int x)
-{
-    asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_word_big(volatile UWORD *to, int x)
-{
-    asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline ULONG read_long_little(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from));
-    return (ULONG)x;
-}
-
-static inline ULONG read_long_big(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (ULONG)x;
-}
-
-static inline void write_long_little(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_long_big(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-#define port_to_mem(from) (0xFE000000|(from))
-#define in_byte(from) read_byte( (UBYTE *)port_to_mem(from))
-#define in_word(from) read_word_little((UWORD *)port_to_mem(from))
-#define in_long(from) read_long_little((ULONG *)port_to_mem(from))
-#define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val)
-#define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val)
-#define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val)
-
-static void X86API undefined_intr(int intno)
-{
-    extern u16 A1_rdw(u32 addr);
-    if (A1_rdw(intno * 4 + 2) == BIOS_SEG)
-    {
-	PRINTF("Undefined interrupt %xh called AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   intno, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-	X86EMU_halt_sys();
-    }
-    else
-    {
-	PRINTF("Calling interrupt %xh, AL=%xh, AH=%xh\n", intno, M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int42(int intno);
-static void X86API int15(int intno);
-
-static void X86API int10(int intno)
-{
-    if (A1_rdw(intno*4+2) == BIOS_SEG)
-	int42(intno);
-    else
-    {
-	PRINTF("int10: branching to %04X:%04X, AL=%xh, AH=%xh\n", A1_rdw(intno*4+2), A1_rdw(intno*4),
-	       M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int1A(int intno)
-{
-    int device;
-
-    switch(M.x86.R_AX)
-    {
-    case 0xB101: /* PCI Bios Present? */
-	M.x86.R_AL  = 0x00;
-	M.x86.R_EDX = 0x20494350;
-	M.x86.R_BX  = 0x0210;
-	M.x86.R_CL  = 3;
-	CLEAR_FLAG(F_CF);
-	break;
-    case 0xB102: /* Find device */
-	device = mypci_find_device(M.x86.R_DX, M.x86.R_CX, M.x86.R_SI);
-	if (device != -1)
-	{
-	    M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	    M.x86.R_BH = mypci_bus(device);
-	    M.x86.R_BL = mypci_devfn(device);
-	}
-	else
-	{
-	    M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB103: /* Find PCI class code */
-	M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	/*printf("Find by class not yet implmented"); */
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB108: /* read config byte */
-	M.x86.R_CL = mypci_read_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_byte %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CL); */
-	break;
-    case 0xB109: /* read config word */
-	M.x86.R_CX = mypci_read_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_word %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10A: /* read config dword */
-	M.x86.R_ECX = mypci_read_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_long %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_ECX); */
-	break;
-    case 0xB10B: /* write config byte */
-	mypci_write_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CL);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_byte %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_CL); */
-	break;
-    case 0xB10C: /* write config word */
-	mypci_write_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_word %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10D: /* write config dword */
-	mypci_write_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_ECX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_long %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_ECX); */
-	break;
-    default:
-	PRINTF("BIOS int %xh: Unknown function AX=%04xh\n", intno, M.x86.R_AX);
-
-    }
-}
-
-void bios_init(void)
-{
-    int i;
-    X86EMU_intrFuncs bios_intr_tab[256];
-
-    for (i=0; i<256; i++)
-    {
-	write_long_little(M.mem_base+i*4, BIOS_SEG<<16);
-	bios_intr_tab[i] = undefined_intr;
-    }
-
-    bios_intr_tab[0x10] = int10;
-    bios_intr_tab[0x1A] = int1A;
-    bios_intr_tab[0x42] = int42;
-    bios_intr_tab[0x15] = int15;
-
-    bios_intr_tab[0x6D] = int42;
-
-    X86EMU_setupIntrFuncs(bios_intr_tab);
-    video_init();
-}
-
-unsigned char setup_40x25[] =
-{
-    0x38, 0x28, 0x2d, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_80x25[] =
-{
-    0x71, 0x50, 0x5a, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_graphics[] =
-{
-    0x38, 0x28, 0x20, 0x0a, 0x7f, 6, 0x64,
-    0x70, 2, 1, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_bw[] =
-{
-    0x61, 0x50, 0x52, 0x0f, 0x19, 6, 0x19,
-    0x19, 2, 0x0d, 0x0b, 0x0c, 0, 0, 0, 0
-};
-
-unsigned char * setup_modes[] =
-{
-    setup_40x25,     /* mode 0: 40x25 bw text */
-    setup_40x25,     /* mode 1: 40x25 col text */
-    setup_80x25,     /* mode 2: 80x25 bw text */
-    setup_80x25,     /* mode 3: 80x25 col text */
-    setup_graphics,  /* mode 4: 320x200 col graphics */
-    setup_graphics,  /* mode 5: 320x200 bw graphics */
-    setup_graphics,  /* mode 6: 640x200 bw graphics */
-    setup_bw         /* mode 7: 80x25 mono text */
-};
-
-unsigned int setup_cols[] =
-{
-    40, 40, 80, 80, 40, 40, 80, 80
-};
-
-unsigned char setup_modesets[] =
-{
-     0x2C, 0x28, 0x2D, 0x29, 0x2A, 0x2E, 0x1E, 0x29
-};
-
-unsigned int setup_bufsize[] =
-{
-    2048, 2048, 4096, 2096, 16384, 16384, 16384, 4096
-};
-
-void bios_set_mode(int mode)
-{
-    int i;
-    unsigned char mode_set = setup_modesets[mode]; /* Control register value */
-    unsigned char *setup_regs = setup_modes[mode]; /* Register 3D4 Array */
-
-    /* Switch video off */
-    out_byte(0x3D8, mode_set & 0x37);
-
-    /* Set up parameters at 3D4h */
-    for (i=0; i<16; i++)
-    {
-	out_byte(0x3D4, (unsigned char)i);
-	out_byte(0x3D5, *setup_regs);
-	setup_regs++;
-    }
-
-    /* Enable video */
-    out_byte(0x3D8, mode_set);
-
-    /* Set overscan */
-    if (mode == 6) out_byte(0x3D9, 0x3F);
-    else           out_byte(0x3D9, 0x30);
-}
-
-static void bios_print_string(void)
-{
-    extern void video_bios_print_string(char *string, int x, int y, int attr, int count);
-    char *s = (char *)(M.x86.R_ES<<4) + M.x86.R_BP;
-    int attr;
-    if (M.x86.R_AL & 0x02) attr = - 1;
-    else                   attr = M.x86.R_BL;
-    video_bios_print_string(s, M.x86.R_DH, M.x86.R_DL, attr, M.x86.R_CX);
-}
-
-static void X86API int42(int intno)
-{
-    switch (M.x86.R_AH)
-    {
-    case 0x00:
-	bios_set_mode(M.x86.R_AL);
-	break;
-    case 0x13:
-	bios_print_string();
-	break;
-    default:
-	PRINTF("Warning: VIDEO BIOS interrupt %xh unimplemented function %xh, AL = %xh\n",
-	       intno, M.x86.R_AH, M.x86.R_AL);
-    }
-}
-
-static void X86API int15(int intno)
-{
-    PRINTF("Called interrupt 15h: AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-}

board/MAI/bios_emulator/glue.c

@@ -1,515 +0,0 @@
-#include <common.h>
-#include <pci.h>
-#include <74xx_7xx.h>
-
-
-#ifdef DEBUG
-#undef DEBUG
-#endif
-
-#ifdef DEBUG
-#define PRINTF(format, args...) _printf(format , ## args)
-#else
-#define PRINTF(format, argc...)
-#endif
-
-static pci_dev_t to_pci(int bus, int devfn)
-{
-    return PCI_BDF(bus, (devfn>>3), devfn&3);
-}
-
-int mypci_find_device(int vendor, int product, int index)
-{
-    return pci_find_device(vendor, product, index);
-}
-
-int mypci_bus(int device)
-{
-    return PCI_BUS(device);
-}
-
-int mypci_devfn(int device)
-{
-    return (PCI_DEV(device)<<3) | PCI_FUNC(device);
-}
-
-
-#define mypci_read_func(type, size)				\
-type mypci_read_cfg_##size##(int bus, int devfn, int offset)	\
-{								\
-    type c;							\
-    pci_read_config_##size##(to_pci(bus, devfn), offset, &c);	\
-    return c;							\
-}
-
-#define mypci_write_func(type, size)				\
-void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value)	\
-{								\
-    pci_write_config_##size##(to_pci(bus, devfn), offset, value);	\
-}
-
-mypci_read_func(u8,byte);
-mypci_read_func(u16,word);
-
-mypci_write_func(u8,byte);
-mypci_write_func(u16,word);
-
-u32 mypci_read_cfg_long(int bus, int devfn, int offset)
-{
-    u32 c;
-    pci_read_config_dword(to_pci(bus, devfn), offset, &c);
-    return c;
-}
-
-void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
-{
-    pci_write_config_dword(to_pci(bus, devfn), offset, value);
-}
-
-void _printf(const char *fmt, ...)
-{
-    va_list args;
-    char buf[CFG_PBSIZE];
-
-    va_start(args, fmt);
-    (void)vsprintf(buf, fmt, args);
-    va_end(args);
-
-    printf(buf);
-}
-
-char *_getenv(char *name)
-{
-    return getenv(name);
-}
-
-unsigned long get_bar_size(pci_dev_t dev, int offset)
-{
-    u32 bar_back, bar_value;
-
-    /*  Save old BAR value */
-    pci_read_config_dword(dev, offset, &bar_back);
-
-    /*  Write all 1's. */
-    pci_write_config_dword(dev, offset, ~0);
-
-    /*  Now read back the relevant bits */
-    pci_read_config_dword(dev, offset, &bar_value);
-
-    /*  Restore original value */
-    pci_write_config_dword(dev, offset, bar_back);
-
-    if (bar_value == 0) return 0xFFFFFFFF; /*  This BAR is disabled */
-
-    if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
-    {
-	/*  This is a memory space BAR. Mask it out so we get the size of it */
-	return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-    }
-
-    /*  Not suitable */
-    return 0xFFFFFFFF;
-}
-
-void enable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg |= 0x08; */
-    cfg |= 0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void disable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg &= ~0x08; */
-    cfg &= ~0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void map_rom(pci_dev_t dev, u32 address)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
-}
-
-void unmap_rom(pci_dev_t dev)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-}
-
-void bat_map(u8 batnum, u32 address, u32 length)
-{
-    u32 temp = address;
-    address &= 0xFFFE0000;
-    temp    &= 0x0001FFFF;
-    length = (length - 1 ) >> 17;
-    length <<= 2;
-
-    switch (batnum)
-    {
-    case 0:
-	__asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
-	break;
-    case 1:
-	__asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
-	break;
-    case 2:
-	__asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
-	break;
-    case 3:
-	__asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
-	break;
-    }
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
-
-int attempt_map_rom(pci_dev_t dev, void *copy_address)
-{
-    u32 rom_size      = 0;
-    u32 rom_address   = 0;
-    u32 bar_size      = 0;
-    u32 bar_backup    = 0;
-    int i,j;
-    void *image       = 0;
-    u32 image_size    = 0;
-    int did_correct   = 0;
-    u32 prefetch_addr = 0;
-    u32 prefetch_size = 0;
-    u32 prefetch_idx  = 0;
-
-    /*  Get the size of the expansion rom */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
-    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
-    if ((rom_size & 0x01) == 0)
-    {
-	PRINTF("No ROM\n");
-	return 0;
-    }
-
-    rom_size &= 0xFFFFF800;
-    rom_size = (~rom_size)+1;
-
-    PRINTF("ROM Size is %dK\n", rom_size/1024);
-
-    /*
-     * Try to find a place for the ROM. We always attempt to use
-     * one of the card's bases for this, as this will be in any
-     * bridge's resource range as well as being free of conflicts
-     * with other cards. In a graphics card it is very unlikely
-     * that there won't be any base address that is large enough to
-     * hold the rom.
-     *
-     * FIXME: To work around this, theoretically the largest base
-     * could be used if none is found in the loop below.
-     */
-
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	bar_size = get_bar_size(dev, i);
-	PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
-	       (i - PCI_BASE_ADDRESS_0)/4,
-	       bar_size/1024);
-	if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
-	{
-	    PRINTF("Found a match for rom size\n");
-	    pci_read_config_dword(dev, i, &rom_address);
-	    rom_address &= 0xFFFFFFF0;
-	    if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
-	}
-    }
-
-    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
-    {
-	PRINTF("No suitable rom address found\n");
-	return 0;
-    }
-
-    /*  Disable the BAR */
-    pci_read_config_dword(dev, i, &bar_backup);
-    pci_write_config_dword(dev, i, 0);
-
-    /*  Map ROM */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
-
-    /*  Copy the rom to a place in the emulator space */
-    PRINTF("Claiming BAT 2\n");
-    bat_map(2, rom_address, rom_size);
-    /* show_bat_mapping(); */
-
-    if (0 == find_image(rom_address, rom_size, &image, &image_size))
-    {
-	PRINTF("No x86 BIOS image found\n");
-	return 0;
-    }
-
-    PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
-
-    /* memcpy(copy_address, rom_address, rom_size); */
-    {
-	unsigned char *from = (unsigned char *)image; /* rom_address; */
-	unsigned char *to = (unsigned char *)copy_address;
-	for (j=0; j<image_size /*rom_size*/; j++)
-	{
-	    *to++ = *from++;
-	}
-    }
-
-    PRINTF("Copy is done\n");
-
-    /*  Unmap the ROM and restore the BAR */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-    pci_write_config_dword(dev, i, bar_backup);
-
-    /*  FIXME: Shouldn't be needed anymore*/
-    /* bat_map(2, 0x80000000, 256*1024*1024);
-       show_bat_mapping(); */
-
-    /*
-     * Since most cards can probably only do 16 bit IO addressing, we
-     * correct their IO base into an appropriate value.
-     * This should do for most.
-     */
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	unsigned long value;
-	pci_read_config_dword(dev, i, &value);
-	if (value & 0x01) /*  IO */
-	{
-	    did_correct = 1;
-	    pci_write_config_dword(dev, i, 0x1001);
-	    break;
-	}
-
-	if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
-	{
-	    prefetch_idx = i;
-	    prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
-	    prefetch_size = get_bar_size(dev, i);
-	}
-    }
-
-    if (1) /* did_correct) */
-    {
-	extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
-	int busnr = PCI_BUS(dev);
-	if (busnr)
-	{
-	    pci_dev_t bridge;
-	    PRINTF("Need to correct bridge device for IO range change\n");
-	    bridge = pci_find_bridge_for_bus(NULL, busnr);
-	    if (bridge == PCI_ANY_ID)
-	    {
-		PRINTF("Didn't find bridge. Hope that's OK\n");
-	    }
-	    else
-	    {
-		/*
-		 * Set upper I/O base/limit to 0
-		 */
-		pci_write_config_byte(bridge, 0x30, 0x00);
-		pci_write_config_byte(bridge, 0x31, 0x00);
-		pci_write_config_byte(bridge, 0x32, 0x00);
-		pci_write_config_byte(bridge, 0x33, 0x00);
-		if (did_correct)
-		{
-		    /*
-		     * set lower I/O base to 1000
-		     * That is, bits 0:3 are set to 0001 by default.
-		     * bits 7:4 contain I/O address bits 15:12
-		     * all others are assumed 0.
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    /*
-		     * Set lower I/O limit to 1FFF
-		     * That is, bits 0:3 are reserved and always 0000
-		     * Bits 7:4 contain I/O address bits 15:12
-		     * All others are assumed F.
-		     */
-		    pci_write_config_byte(bridge, 0x1D, 0x10);
-		    pci_write_config_byte(bridge, 0x0D, 0x20);
-		    PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-		else
-		{
-		    /*
-		     * This card doesn't have I/O, we disable I/O forwarding
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    pci_write_config_byte(bridge, 0x1D, 0x00);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-		    pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-		    PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-	    }
-	    /*
-	     * Correct the prefetchable memory base, which is not set correctly by
-	     * the U-Boot autoconfig stuff
-	     */
-	    if (prefetch_idx)
-	    {
-/* 		PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
-/* 		       prefetch_addr, prefetch_addr+prefetch_size, */
-/* 		       prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
-	    }
-
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
-
-	    pci_write_config_byte(bridge, 0xD0, 0x0A);
-	    pci_write_config_byte(bridge, 0xD3, 0x04);
-
-	    /*
-	     * Set the interrupt pin to 0
-	     */
-#if 0
-	    pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0);
-	    pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0);
-#endif
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-
-	}
-    }
-
-    /* Finally, enable the card's IO and memory response */
-    pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-    pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-    pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
-
-    return 1;
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
-{
-    int i = 0;
-    unsigned char *rom = (unsigned char *)rom_address;
-    /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
-
-    for (;;)
-    {
-	unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
-	unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
-	unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
-	if (*rom != 0x55 || *(rom+1) != 0xAA)
-	{
-	    PRINTF("Invalid header this is\n");
-	    return 0;
-	}
-	PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
-	       pci_image_type==0 ? "x86" :
-	       pci_image_type==1 ? "OpenFirmware" :
-	       "Unknown");
-	if (pci_image_type == 0)
-	{
-	    *image = rom;
-	    *image_size = pci_image_length;
-	    return 1;
-	}
-
-	if (*(rom+pci_data_offset+0x15) & 0x80)
-	{
-	    PRINTF("LAST image encountered, no image found\n");
-	    return 0;
-	}
-
-	rom += pci_image_length;
-    }
-}
-
-void show_bat_mapping(void)
-{
-    u32 dbat0u, dbat0l, ibat0u, ibat0l;
-    u32 dbat1u, dbat1l, ibat1u, ibat1l;
-    u32 dbat2u, dbat2l, ibat2u, ibat2l;
-    u32 dbat3u, dbat3l, ibat3u, ibat3l;
-    u32 msr, hid0, l2cr_reg;
-
-    __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
-    __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
-    __asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
-    __asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
-
-    __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
-    __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
-    __asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
-    __asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
-
-    __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
-    __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
-    __asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
-    __asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
-
-    __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
-    __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
-    __asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
-    __asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
-
-    __asm volatile ("mfmsr %0"     : "=r" (msr));
-    __asm volatile ("mfspr %0,1008": "=r" (hid0));
-    __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
-
-    printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
-	   dbat0u, dbat0l, ibat0u, ibat0l);
-    printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
-	   dbat1u, dbat1l, ibat1u, ibat1l);
-    printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
-	   dbat2u, dbat2l, ibat2u, ibat2l);
-    printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
-	   dbat3u, dbat3l, ibat3u, ibat3l);
-
-    printf("\nMSR: %08x   HID0: %08x   L2CR: %08x \n", msr,hid0, l2cr_reg);
-}
-
-
-void remove_init_data(void)
-{
-    char *s;
-
-    /*  Invalidate and disable data cache */
-    invalidate_l1_data_cache();
-    dcache_disable();
-
-    s = getenv("x86_cache");
-
-    if (!s)
-    {
-	icache_enable();
-	dcache_enable();
-    }
-    else if (s)
-    {
-	if (strcmp(s, "dcache")==0)
-	{
-	    dcache_enable();
-	}
-	else if (strcmp(s, "icache") == 0)
-	{
-	    icache_enable();
-	}
-	else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
-	{
-	    dcache_enable();
-	    icache_enable();
-	}
-    }
-
-    /*   show_bat_mapping();*/
-}

board/MAI/bios_emulator/glue.h

@@ -1,57 +0,0 @@
-#ifndef GLUE_H
-#define GLUE_H
-
-typedef unsigned int pci_dev_t;
-
-int mypci_find_device(int vendor, int product, int index);
-int mypci_bus(int device);
-int mypci_devfn(int device);
-unsigned long get_bar_size(pci_dev_t dev, int offset);
-
-u8   mypci_read_cfg_byte(int bus, int devfn, int offset);
-u16  mypci_read_cfg_word(int bus, int devfn, int offset);
-u32  mypci_read_cfg_long(int bus, int devfn, int offset);
-
-void mypci_write_cfg_byte(int bus, int devfn, int offset, u8 value);
-void mypci_write_cfg_word(int bus, int devfn, int offset, u16 value);
-void mypci_write_cfg_long(int bus, int devfn, int offset, u32 value);
-
-void _printf(const char *fmt, ...);
-char *_getenv(char *name);
-
-void *malloc(size_t size);
-void memset(void *addr, int value, size_t size);
-void memcpy(void *to, void *from, size_t numbytes);
-int  strcmp(char *, char *);
-
-void enable_compatibility_hole(void);
-void disable_compatibility_hole(void);
-
-void map_rom(pci_dev_t dev, unsigned long address);
-void unmap_rom(pci_dev_t dev);
-int  attempt_map_rom(pci_dev_t dev, void *copy_address);
-
-#define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
-#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
-#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
-#define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fUL)
-
-#define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
-#define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
-#define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
-#define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
-#define PCI_BUS(d)      (((d) >> 16) & 0xff)
-#define PCI_DEV(d)      (((d) >> 11) & 0x1f)
-#define PCI_FUNC(d)     (((d) >> 8) & 0x7)
-#define PCI_BDF(b,d,f)  ((b) << 16 | (d) << 11 | (f) << 8)
-
-#define PCI_ANY_ID (~0)
-#define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
-#define PCI_ROM_ADDRESS_ENABLE 0x01
-
-#define OFF(addr) ((addr) & 0xFFFF)
-#define SEG(addr) (((addr)>>4) &0xF000)
-
-#endif

board/MAI/bios_emulator/scitech/bin/bc31-d16.bat

@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 3.1.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC3_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC3.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%BC3_PATH%\BIN;%DEFPATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC3_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 3.1 DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-c32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-d16.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-d32.bat

@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bc45-snp.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat

@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows VxD mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32-bit VxD compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-w16.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-w32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-c32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-d16.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-d32.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bc50-smx.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit SMX compilation configuration set up (SMX32).

board/MAI/bios_emulator/scitech/bin/bc50-snp.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat

@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows (VxD) compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-w16.bat

@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-w32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-x11.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit SMX compilation configuration set up (SMX32).

board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat

@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows (VxD) compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat

@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/build

@@ -1,22 +0,0 @@
-#! /bin/sh
-
-if [ $# -lt 1 ] || ( [ "$1" != gcc-linux ] && [ "$1" != qnx4 ] ) ; then
-	echo Usage: $0 compiler_name [DMAKE commands]
-	echo
-	echo Current compilers:
-	echo "  gcc-linux  - GNU C/C++ 2.7 or higher, 32 bit"
-	echo "  qnx4  - Watcom C/C++ 10.6 or higher, 32 bit"
-	exit 1
-fi
-
-unset DBG OPT OPT_SIZE BUILD_DLL IMPORT_DLL FPU CHECKS BETA
-. ${1}.sh
-
-shift
-dmake $* && exit 0
-
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-exit 1
-

board/MAI/bios_emulator/scitech/bin/build.bat

@@ -1,4 +0,0 @@
-@echo off
-rem Disable checked build and build release code
-set CHECKED=
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/build_db.bat

@@ -1,4 +0,0 @@
-@echo off
-rem Enable checked build and build debug code
-set CHECKED=1
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/build_it.bat

@@ -1,432 +0,0 @@
-@echo off
-rem Generic batch file to build a version of the library. This batch file
-rem assumes that the correct batch files exist to setup the appropriate
-rem compilation environments, and that the DMAKE.EXE program is available
-rem somewhere on the path.
-rem
-rem Builds as release or debug depending on the value of the CHECKED
-rem environment variable.
-
-rem Unset all environment variables that change the compile process
-set DBG=
-set OPT=
-set OPT_SIZE=
-set BUILD_DLL=
-set IMPORT_DLL=
-set FPU=
-set CHECKS=
-set BETA=
-
-if %1==bc31-d16 goto bc31-d16
-if %1==bc45-d16 goto bc45-d16
-if %1==bc45-d32 goto bc45-d32
-if %1==bc45-tnt goto bc45-tnt
-if %1==bc45-w16 goto bc45-w16
-if %1==bc45-w32 goto bc45-w32
-if %1==bc45-c32 goto bc45-c32
-if %1==bc45-vxd goto bc45-vxd
-if %1==bc45-snp goto bc45-snp
-if %1==bc50-d16 goto bc50-d16
-if %1==bc50-d32 goto bc50-d32
-if %1==bc50-tnt goto bc50-tnt
-if %1==bc50-w16 goto bc50-w16
-if %1==bc50-w32 goto bc50-w32
-if %1==bc50-c32 goto bc50-c32
-if %1==bc50-vxd goto bc50-vxd
-if %1==bc50-snp goto bc50-snp
-if %1==gcc2-d32 goto gcc2-d32
-if %1==gcc2-w32 goto gcc2-w32
-if %1==gcc2-c32 goto gcc2-c32
-if %1==gcc2-linux goto gcc2-linux
-if %1==vc40-d16 goto vc40-d16
-if %1==vc40-tnt goto vc40-tnt
-if %1==vc40-w16 goto vc40-w16
-if %1==vc40-w32 goto vc40-w32
-if %1==vc40-c32 goto vc40-c32
-if %1==vc40-drv9x goto vc40-drv9x
-if %1==vc40-drvnt goto vc40-drvnt
-if %1==vc40-rtt goto vc40-rtt
-if %1==vc40-snp goto vc40-snp
-if %1==vc50-d16 goto vc50-d16
-if %1==vc50-tnt goto vc50-tnt
-if %1==vc50-w16 goto vc50-w16
-if %1==vc50-w32 goto vc50-w32
-if %1==vc50-c32 goto vc50-c32
-if %1==vc50-drv9x goto vc50-drv9x
-if %1==vc50-drvnt goto vc50-drvnt
-if %1==vc50-rtt goto vc50-rtt
-if %1==vc50-snp goto vc50-snp
-if %1==vc60-d16 goto vc60-d16
-if %1==vc60-tnt goto vc60-tnt
-if %1==vc60-w16 goto vc60-w16
-if %1==vc60-w32 goto vc60-w32
-if %1==vc60-c32 goto vc60-c32
-if %1==vc60-drv9x goto vc60-drv9x
-if %1==vc60-drvnt goto vc60-drvnt
-if %1==vc60-drvw2k goto vc60-drvw2k
-if %1==vc60-rtt goto vc60-rtt
-if %1==vc60-snp goto vc60-snp
-if %1==wc10ad16 goto wc10ad16
-if %1==wc10ad32 goto wc10ad32
-if %1==wc10atnt goto wc10atnt
-if %1==wc10aw16 goto wc10aw16
-if %1==wc10aw32 goto wc10aw32
-if %1==wc10ac32 goto wc10ac32
-if %1==wc10ao32 goto wc10ao32
-if %1==wc10ap32 goto wc10ap32
-if %1==wc10asnp goto wc10asnp
-if %1==wc10-d16 goto wc10-d16
-if %1==wc10-d32 goto wc10-d32
-if %1==wc10-tnt goto wc10-tnt
-if %1==wc10-w16 goto wc10-w16
-if %1==wc10-w32 goto wc10-w32
-if %1==wc10-c32 goto wc10-c32
-if %1==wc10-o32 goto wc10-o32
-if %1==wc10-p32 goto wc10-p32
-if %1==wc10-snp goto wc10-snp
-if %1==wc11-d16 goto wc11-d16
-if %1==wc11-d32 goto wc11-d32
-if %1==wc11-tnt goto wc11-tnt
-if %1==wc11-w16 goto wc11-w16
-if %1==wc11-w32 goto wc11-w32
-if %1==wc11-c32 goto wc11-c32
-if %1==wc11-o32 goto wc11-o32
-if %1==wc11-p32 goto wc11-p32
-if %1==wc11-snp goto wc11-snp
-
-echo Usage: BUILD 'compiler_name' [DMAKE commands]
-echo.
-echo Where 'compiler_name' is of the form comp-os, where
-echo 'comp' defines the compiler and 'os' defines the OS environment.
-echo For instance 'bc50-w32' is for Borland C++ 5.0 for Win32.
-echo The value of 'comp' can be any of the following:
-echo.
-echo    bc45 - Borland C++ 4.5x
-echo    bc50 - Borland C++ 5.x
-echo    vc40 - Visual C++ 4.x
-echo    vc50 - Visual C++ 5.x
-echo    vc60 - Visual C++ 6.x
-echo    wc10 - Watcom C++ 10.6
-echo    wc11 - Watcom C++ 11.0
-echo    gcc2 - GNU C/C++ 2.9x
-echo.
-echo The value of 'os' can be one of the following:
-echo.
-echo    d16   - 16-bit DOS
-echo    d32   - 32-bit DOS
-echo    w16   - 16-bit Windows GUI mode
-echo    c32   - 32-bit Windows console mode
-echo    w32   - 32-bit Windows GUI mode
-echo    o16   - 16-bit OS/2 console mode
-echo    o32   - 32-bit OS/2 console mode
-echo    p32   - 32-bit OS/2 Presentation Manager
-echo    snp   - 32-bit SciTech Snap application
-echo    linux - 32-bit Linux application
-goto end
-
-rem -------------------------------------------------------------------------
-rem Setup for the specified compiler
-
-:bc31-d16
-call bc31-d16.bat
-goto compileit
-
-:bc45-d16
-call bc45-d16.bat
-goto compileit
-
-:bc45-d32
-call bc45-d32.bat
-goto compileit
-
-:bc45-tnt
-call bc45-tnt.bat
-goto compileit
-
-:bc45-w16
-call bc45-w16.bat
-goto compileit
-
-:bc45-w32
-call bc45-w32.bat
-goto compileit
-
-:bc45-c32
-call bc45-c32.bat
-goto compileit
-
-:bc45-vxd
-call bc45-vxd.bat
-goto compileit
-
-:bc50-d16
-call bc50-d16.bat
-goto compileit
-
-:bc50-d32
-call bc50-d32.bat
-goto compileit
-
-:bc50-tnt
-call bc50-tnt.bat
-goto compileit
-
-:bc50-w16
-call bc50-w16.bat
-goto compileit
-
-:bc50-w32
-call bc50-w32.bat
-goto compileit
-
-:bc50-c32
-call bc50-c32.bat
-goto compileit
-
-:bc50-vxd
-call bc50-vxd.bat
-goto compileit
-
-:gcc2-d32
-call gcc2-d32.bat
-goto compileit
-
-:gcc2-w32
-call gcc2-w32.bat
-goto compileit
-
-:gcc2-c32
-call gcc2-c32.bat
-goto compileit
-
-:gcc2-linux
-call gcc2-linux.bat
-goto compileit
-
-:sc70-d16
-call sc70-d16.bat
-goto compileit
-
-:sc70-w16
-call sc70-w16.bat
-goto compileit
-
-:sc70-tnt
-call sc70-tnt.bat
-goto compileit
-
-:sc70-w32
-call sc70-w32.bat
-goto compileit
-
-:sc70-c32
-call sc70-c32.bat
-goto compileit
-
-:vc40-d16
-call vc40-d16.bat
-goto compileit
-
-:vc40-tnt
-call vc40-tnt.bat
-goto compileit
-
-:vc40-w16
-call vc40-w16.bat
-goto compileit
-
-:vc40-w32
-call vc40-w32.bat
-goto compileit
-
-:vc40-c32
-call vc40-c32.bat
-goto compileit
-
-:vc40-drv9x
-call vc40-drv9x.bat
-goto compileit
-
-:vc40-drvnt
-call vc40-drvnt.bat
-goto compileit
-
-:vc40-rtt
-call vc40-rtt.bat
-goto compileit
-
-:vc50-d16
-call vc50-d16.bat
-goto compileit
-
-:vc50-tnt
-call vc50-tnt.bat
-goto compileit
-
-:vc50-w16
-call vc50-w16.bat
-goto compileit
-
-:vc50-w32
-call vc50-w32.bat
-goto compileit
-
-:vc50-c32
-call vc50-c32.bat
-goto compileit
-
-:vc50-drv9x
-call vc50-drv9x.bat
-goto compileit
-
-:vc50-drvnt
-call vc50-drvnt.bat
-goto compileit
-
-:vc50-rtt
-call vc50-rtt.bat
-goto compileit
-
-:vc60-d16
-call vc60-d16.bat
-goto compileit
-
-:vc60-tnt
-call vc60-tnt.bat
-goto compileit
-
-:vc60-w16
-call vc60-w16.bat
-goto compileit
-
-:vc60-w32
-call vc60-w32.bat
-goto compileit
-
-:vc60-c32
-call vc60-c32.bat
-goto compileit
-
-:vc60-drv9x
-call vc60-drv9x.bat
-goto compileit
-
-:vc60-drvnt
-call vc60-drvnt.bat
-goto compileit
-
-:vc60-drvw2k
-call vc60-drvw2k.bat
-goto compileit
-
-:vc60-rtt
-call vc60-rtt.bat
-goto compileit
-
-:wc10ad16
-call wc10ad16.bat
-goto compileit
-
-:wc10ad32
-call wc10ad32.bat
-goto compileit
-
-:wc10atnt
-call wc10atnt.bat
-goto compileit
-
-:wc10aw16
-call wc10aw16.bat
-goto compileit
-
-:wc10aw32
-call wc10aw32.bat
-goto compileit
-
-:wc10ac32
-call wc10ac32.bat
-goto compileit
-
-:wc10ao32
-call wc10ao32.bat
-goto compileit
-
-:wc10ap32
-call wc10ap32.bat
-goto compileit
-
-:wc10-d16
-call wc10-d16.bat
-goto compileit
-
-:wc10-d32
-call wc10-d32.bat
-goto compileit
-
-:wc10-tnt
-call wc10-tnt.bat
-goto compileit
-
-:wc10-w16
-call wc10-w16.bat
-goto compileit
-
-:wc10-w32
-call wc10-w32.bat
-goto compileit
-
-:wc10-c32
-call wc10-c32.bat
-goto compileit
-
-:wc10-o32
-call wc10-o32.bat
-goto compileit
-
-:wc10-p32
-call wc10-p32.bat
-goto compileit
-
-:wc11-d16
-call wc11-d16.bat
-goto compileit
-
-:wc11-d32
-call wc11-d32.bat
-goto compileit
-
-:wc11-tnt
-call wc11-tnt.bat
-goto compileit
-
-:wc11-w16
-call wc11-w16.bat
-goto compileit
-
-:wc11-w32
-call wc11-w32.bat
-goto compileit
-
-:wc11-c32
-call wc11-c32.bat
-goto compileit
-
-:wc11-o32
-call wc11-o32.bat
-goto compileit
-
-:wc11-p32
-call wc11-p32.bat
-goto compileit
-
-:compileit
-k_rm -f *.lib *.a
-dmake %2 %3 %4 %5 %6 %7 %8 %9
-if errorlevel 1 goto errorend
-goto end
-
-:errorend
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-:end

board/MAI/bios_emulator/scitech/bin/cddrv.bat

@@ -1,6 +0,0 @@
-@echo off
-%1
-cd %3
-%4 %5 %6 %7 %8 %9
-%2
-

board/MAI/bios_emulator/scitech/bin/cdit

@@ -1,10 +0,0 @@
-#! /bin/sh
-
-cd $1
-PROG=$2
-shift 2
-rm -f *.lib *.a
-$PROG $*
-RET=$?
-cd ..
-exit $RET

board/MAI/bios_emulator/scitech/bin/cdit.bat

@@ -1,5 +0,0 @@
-@echo off
-cd %1
-k_rm -f *.lib *.a
-shift 1
-%1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/djgpp.env

@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/release/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:

board/MAI/bios_emulator/scitech/bin/djgpp_db.env

@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/debug/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:

board/MAI/bios_emulator/scitech/bin/findint3.bat

@@ -1 +0,0 @@
-perl c:\scitech\src\perl\findint3.per

board/MAI/bios_emulator/scitech/bin/gcc-beos.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for BeOS
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_beos.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=0
-export USE_BEOS=1
-
-echo GCC BeOS console compilation environment set up

board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for FreeBSD
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_freebsd.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=1
-export USE_FREEBSD=1
-
-echo GCC FreeBSD console compilation environment set up

board/MAI/bios_emulator/scitech/bin/gcc-linux.sh

@@ -1,19 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for Linux
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_linux.mk
-export INCLUDE="include;$SCITECH/include;$PRIVATE/include"
-export USE_LINUX=1
-
-if [ "x$LIBC" = x ]; then
-	echo "GCC Linux console compilation environment set up (glib)"
-else
-	echo "GCC Linux console compilation environment set up (libc5)"
-fi

board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 console compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat

@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with DJGPP 2.02
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP.ENV %DJ_PATH%\DJGPP.ENV
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP_DB.ENV %DJ_PATH%\DJGPP.ENV
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set DJGPP=%DJ_PATH%\DJGPP.ENV
-set INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%DJ_PATH%\INCLUDE;
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\DJ32.MK
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set DJ_LIBBASE=dj2
-PATH %SCITECH_BIN%;%DJ_PATH%\BIN;%DEFPATH%
-
-echo DJGPP 2.02 32-bit DOS compilation environment set up (DPMI).
-

board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C cross-compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\gcc_linux.mk
-set MAKE_MODE=UNIX
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\cross-linux\i386-redhat-linux\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Linux console cross compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=1
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 GUI compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/makelib.bat

@@ -1,97 +0,0 @@
-call wc11-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc11-w32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc10-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd \private\src\graphics\drivers

board/MAI/bios_emulator/scitech/bin/meltobjs.sh

@@ -1,23 +0,0 @@
-#! /bin/sh
-#
-# This script generates a single object file from a set of libraries (*.a files)
-# Usage: meltobjs.sh target.o library1.a library2.a ...
-#
-# (C) SciTech Software, Inc. 1998
-#
-
-TMPDIR=/tmp/melt$$
-TARGET=$1
-TARGETDIR=$PWD
-shift
-mkdir $TMPDIR
-
-cd $TMPDIR
-
-for a in $*
-do
-    ar x $a
-done
-ld -r -o $TARGETDIR/$TARGET *.o
-
-rm -fr $TMPDIR

board/MAI/bios_emulator/scitech/bin/ntddk.bat

@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\RELEASE\NTDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\DEBUG\NTDRV\VC6;%MSVCDir%\LIB;.
-
-:done

board/MAI/bios_emulator/scitech/bin/qnx4.sh

@@ -1,18 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX4
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnx4.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/include"
-export USE_QNX=1
-export USE_QNX4=1
-export WC_LIBBASE=wc10
-
-echo Qnx 4 console compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/qnxnto.sh

@@ -1,21 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX Neutrino
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-if [ X$GCC_PATH = "X" ]; then
-	export GCC_PATH=/usr/gcc/bin
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnxnto.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/nto/include"
-export USE_BIOS=1	# VBIOS lib is tiny under Neutrino, always include it
-export USE_QNX=1
-export USE_QNXNTO=1
-
-echo Qnx Neutrino console compilation environment set up

board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh

@@ -1,42 +0,0 @@
-#! /bin/sh
-
-# BeOS VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal BeOS installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/boot/develop/tools/gnupro/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-beos:$PATH
-#if [ "x$LIBC" = x ]; then
-#	export PATH=$PATH:$SCITECH/bin-beos/glibc
-#else
-#	export PATH=$PATH:$SCITECH/bin-beos/libc
-#fi

board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh

@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-freebsd:$PATH

board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh

@@ -1,43 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-export TEMP=/tmp TMP=/tmp
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-linux:$PATH
-if [ "x$LIBC" = x ]; then
-	export PATH=$SCITECH/bin-linux/glibc:$PATH
-else
-	export PATH=$SCITECH/bin-linux/libc:$PATH
-fi

board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh

@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# QNX 4 VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export WC10_PATH=/usr/watcom/10.6/usr
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-qnx:$PATH

board/MAI/bios_emulator/scitech/bin/set-vars.bat

@@ -1,110 +0,0 @@
-@echo off
-REM:=========================================================================
-REM: Master batch file to set up all necessary environment variables for
-REM: the SciTech makefile utilities. This batch file should be executed
-REM: *first* before any other batch files when you start a command shell.
-REM: You should not need to modify any batch files except this one to
-REM: configure the makefile utilities.
-REM:=========================================================================
-
-REM: Set the place where SciTech Software is installed, and where each
-REM: of the supported compilers is installed. These environment variables
-REM: are used by the batch files in the SCITECH\BIN directory.
-REM:
-REM: Modify the as appropriate for your compiler configuration (you should
-REM: only need to change things in this batch file).
-REM:
-REM: This version is for a normal MSDOS installation.
-
-REM: The SCITECH variable points to where batch files, makefile startups,
-REM: include files and source files will be found when compiling.
-
-SET SCITECH=c:\scitech
-
-REM: The SCITECH_LIB variable points to where the SciTech libraries live
-REM: for installation and linking. This allows you to have the source and
-REM: include files on local machines for compiling and have the libraries
-REM: located on a common network machine (for network builds).
-
-SET SCITECH_LIB=%SCITECH%
-
-REM: The PRIVATE variable points to where private source files reside that
-REM: do not live in the public source tree
-
-SET PRIVATE=c:\private
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. We select either DOS hosted
-REM: tools or Win32 hosted tools depending on whether you are running
-REM: on NT or not. Windows 9x users can use the Win32 hosted tools but
-REM: they run slower, but you will have long filenames if you do this.
-
-IF .%OS%==.Windows_NT goto Win32_path
-IF NOT .%WINDIR%==. goto Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-dos
-goto path_set
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. This version uses the Win32
-REM: hosted tools by default, so you can use long filenames.
-
-:Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-win32
-
-:path_set
-
-REM: Set the TMP variable for dmake if this is not already set
-
-SET TMP=%SCITECH%
-
-REM: Set the following environment variable to use the Netwide Assembler
-REM: (NASM) provided with the MGL tools to build all assembler modules.
-REM: If you have Turbo Assembler 4.0 or later and you wish to use it,
-REM: you can use it by removing the following line.
-
-SET USE_NASM=1
-
-REM: The following is used to set up DDK directories for device driver
-REM: development. They can safely be ignored unless you are using the
-REM: SciTech makefile utilities to build device drivers.
-
-SET DDKDRIVE=c:
-SET MSSDK=c:\c\win32sdk
-SET W95_DDKROOT=c:\c\95ddk
-SET W98_DDKROOT=c:\c\98ddk
-SET NT_DDKROOT=c:\c\ntddk
-SET W2K_DDKROOT=c:\c\2000ddk
-SET MASM_ROOT=c:\c\masm611
-SET VTOOLSD=c:\c\vtd95
-SET SOFTICE_PATH=c:\c\sint
-
-REM: The following define the locations of all the compilers that you may
-REM: be using. Change them to reflect where you have installed your
-REM: compilers.
-
-SET BC3_PATH=c:\c\bc3
-SET BC4_PATH=c:\c\bc45
-SET BC5_PATH=c:\c\bc50
-SET BCB5_PATH=c:\c\bcb50
-SET VC_PATH=c:\c\msvc
-SET VC4_PATH=c:\c\vc42
-SET VC5_PATH=c:\c\vc50
-SET VC6_PATH=c:\c\vc60
-SET SC70_PATH=c:\c\sc75
-SET WC10A_PATH=c:\c\wc10a
-SET WC10_PATH=c:\c\wc10
-SET WC11_PATH=c:\c\wc11
-SET TNT_PATH=c:\c\tnt
-SET DJ_PATH=c:\c\djgpp
-SET GCC2_PATH=c:\unix\usr
-
-REM: The following define the locations of the IDE and compiler path
-REM: tools for Visual C++. If you do a standard installation, you wont
-REM: need to change this. If however you did a custom install and changed
-REM: the paths to these directory, you will need to modify this to suit.
-
-SET VC5_MSDevDir=%VC5_PATH%\sharedide
-SET VC5_MSVCDir=%VC5_PATH%\vc
-SET VC6_MSDevDir=%VC6_PATH%\common\msdev98
-SET VC6_MSVCDir=%VC6_PATH%\vc98
-

board/MAI/bios_emulator/scitech/bin/vc40-c32.bat

@@ -1,36 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-d16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 DOS bit compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc40-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development
-call vc40-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC4_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-drvnt.bat

@@ -1,18 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc40-c32.bat sdk > NUL
-
-REM: Extra stuff to set up for Windows NT DDK development
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%NT_DDKROOT%\bin;%PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-snp.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 4.2 Snap compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/vc40-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 4.2 32-bit DOS compilation environment set up (TNT).

board/MAI/bios_emulator/scitech/bin/vc40-w16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET VC_LIBBASE=VC4
-SET USE_RTTARGET=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 bit Windows compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc40-w32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/vc40-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-SET LIB=%VC4_PATH%\LIB;.
-SET TOOLROOTDIR=%VC4_PATH%
-SET INCLUDE=\xc\include;%VC4_PATH%\INCLUDE
-SET INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%DEFPATH%
-
-echo Visual C++ 4.2 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-c32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-d16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc50-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-drvnt.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-rtt.bat

@@ -1,30 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=1
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 RTTarget-32 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-snp.bat

@@ -1,33 +0,0 @@
-@echo off REM Setup environment variables for Visual C++ 5.0 32 bit
-edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 Snap compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 5.0 32-bit compilation environment set up (with TNT).

board/MAI/bios_emulator/scitech/bin/vc50-w16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc50-w32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET LIB=%VC5_PATH%\VC\LIB;.
-SET TOOLROOTDIR=%VC5_PATH%\VC
-SET INCLUDE=\xc\include;%VC5_PATH%\VC\INCLUDE
-SET INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%DEFPATH%
-
-echo Visual C++ 5.0 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-c32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-d16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc60-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-drvnt.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-drvw2k.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call w2kddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows Windows 2000 driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-snp.bat

@@ -1,33 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 6.0 Snap compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC6_PATH%\VC98
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC6_PATH%\VC98\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6 PATH
-%SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 6.0 32-bit compilation environment set up (with TNT).

board/MAI/bios_emulator/scitech/bin/vc60-w16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc60-w32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET LIB=%VC6_PATH%\VC98\LIB;.
-SET TOOLROOTDIR=%VC6_PATH%\VC98
-SET INCLUDE=\xc\include;%VC6_PATH%\VC98\INCLUDE;
-SET INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%DEFPATH%
-
-echo Visual C++ 6.0 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/w2kddk.bat

@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=1
-SET BASEDIR=%W2K_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%BASEDIR%\inc\ddk;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\libfre\i386;%SCITECH_LIB%\LIB\RELEASE\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\libchk\i386;%SCITECH_LIB%\LIB\DEBUG\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-:done

board/MAI/bios_emulator/scitech/bin/wc10-c32.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Win32 console compilation environment set up

board/MAI/bios_emulator/scitech/bin/wc10-d16.bat

@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\WC10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\WC10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\WIN;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/wc10-d32.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit DOS compilation environment set up (DOS4GW)
-

board/MAI/bios_emulator/scitech/bin/wc10-o16.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 16-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os216\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os216\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc16.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=1
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit OS/2 compilation environment set up.