ppc4xx: Complete remove bogus dflush()

Since the current dflush() implementation is know to have some problems
(as seem on lwmon5 ECC init) this patch removes it completely and replaces
it by using clean_dcache_range().

Tested on Katmai with ECC DIMM.

Signed-off-by: Stefan Roese <sr@denx.de>

board/netstal/hcu5/sdram.c

@@ -34,11 +34,11 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 #include <ppc440.h>
 
 void hcu_led_set(u32 value);
 void dcbz_area(u32 start_address, u32 num_bytes);
-void dflush(void);
 
 #define DDR_DCR_BASE 0x10
 #define ddrcfga  (DDR_DCR_BASE+0x0)   /* DDR configuration address reg */
@@ -185,14 +185,14 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 #endif
 
 	sync();
-	eieio();
 
 	puts(str);
 
 	/* ECC bit set method for cached memory */
 	/* Fast method, no noticeable delay */
 	dcbz_area(start_address, num_bytes);
-	dflush();
+	/* Write modified dcache lines back to memory */
+	clean_dcache_range(start_address, start_address + num_bytes);
 	blank_string(strlen(str));
 
 	/* Clear error status */

cpu/ppc4xx/44x_spd_ddr2.c

@@ -40,6 +40,7 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
+#include <asm/cache.h>
 
 #if defined(CONFIG_SPD_EEPROM) &&				\
 	(defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
@@ -237,7 +238,6 @@ static void	DQS_calibration_process(void);
 static void ppc440sp_sdram_register_dump(void);
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 void dcbz_area(u32 start_address, u32 num_bytes);
-void dflush(void);
 
 static u32 mfdcr_any(u32 dcr)
 {
@@ -2355,7 +2355,8 @@ static void program_ecc_addr(unsigned long start_address,
 		} else {
 			/* ECC bit set method for cached memory */
 			dcbz_area(start_address, num_bytes);
-			dflush();
+			/* Write modified dcache lines back to memory */
+			clean_dcache_range(start_address, start_address + num_bytes);
 		}
 
 		blank_string(strlen(str));

cpu/ppc4xx/denali_spd_ddr2.c

@@ -92,7 +92,6 @@
 extern int denali_wait_for_dlllock(void);
 extern void denali_core_search_data_eye(void);
 extern void dcbz_area(u32 start_address, u32 num_bytes);
-extern void dflush(void);
 
 /*
  * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
@@ -1201,7 +1200,8 @@ long int initdram(int board_type)
 #else
 #error Please define CFG_MEM_TOP_HIDE (see README) in your board config file
 #endif
-	dflush();
+	/* Write modified dcache lines back to memory */
+	clean_dcache_range(CFG_SDRAM_BASE, CFG_SDRAM_BASE + dram_size - CFG_MEM_TOP_HIDE);
 	debug("Completed\n");
 	sync();
 	remove_tlb(CFG_SDRAM_BASE, dram_size);

cpu/ppc4xx/start.S

@@ -1675,35 +1675,6 @@ trap_reloc:
 	sync
 	blr
 	function_epilog(dcbz_area)
-
-/*----------------------------------------------------------------------------+
-| dflush.  Assume 32K at vector address is cachable.
-+----------------------------------------------------------------------------*/
-	function_prolog(dflush)
-	mfmsr	r9
-	rlwinm	r8,r9,0,15,13
-	rlwinm	r8,r8,0,17,15
-	mtmsr	r8
-	mfspr	r8,dvlim
-	addi	r3,r0,0x0000
-	mtspr	dvlim,r3
-	mfspr	r3,ivpr
-	addi	r4,r0,1024
-	mtctr	r4
-..dflush_loop:
-	lwz	r6,0x0(r3)
-	addi	r3,r3,32
-	bdnz	..dflush_loop
-	addi	r3,r3,-32
-	mtctr	r4
-..ag:	dcbf	r0,r3
-	addi	r3,r3,-32
-	bdnz	..ag
-	mtspr	dvlim,r8
-	sync
-	mtmsr	r9
-	blr
-	function_epilog(dflush)
 #endif /* CONFIG_440 */
 #endif /* CONFIG_NAND_SPL */