arm/km: replace suenx targets with km_kirkwood

suen3 and suen8 were in first HW version quite different, but
now they are from a u-boot point of view similar. So these
two boards can use the same header file. Other keymile boards
differ only in the usage of the PCI interface. Therefore
a target km_kirkwood_pci was introduced. All targets use
the same header file.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Heiko Schocher <hs@denx.de>

MAINTAINERS

@@ -731,6 +731,10 @@ Sergey Lapin <slapin@ossfans.org>
 
 	afeb9260	ARM926EJS (AT91SAM9260 SoC)
 
+Valentin Longchamp <valentin.longchamp@keymile.com>
+
+	km_kirkwood	ARM926EJS (Kirkwood SoC)
+
 Nishanth Menon <nm@ti.com>
 
 	omap3_sdp3430	ARM ARMV7 (OMAP3xx SoC)
@@ -819,8 +823,6 @@ Heiko Schocher <hs@denx.de>
 
 	magnesium	i.MX27
 	mgcoge3un	ARM926EJS (Kirkwood SoC)
-	suen3		ARM926EJS (Kirkwood SoC)
-	suen8		ARM926EJS (Kirkwood SoC)
 
 Robert Schwebel <r.schwebel@pengutronix.de>
 

MAKEALL

@@ -347,6 +347,7 @@ LIST_ARM9="			\
 	guruplug		\
 	imx27lite		\
 	jadecpu			\
+	km_kirkwood		\
 	lpd7a400		\
 	magnesium		\
 	mv88f6281gtw_ge		\
@@ -373,7 +374,6 @@ LIST_ARM9="			\
 	spear310		\
 	spear320		\
 	spear600		\
-	suen3			\
 	VCMA9			\
 	versatile		\
 	versatileab		\

boards.cfg

@@ -115,8 +115,8 @@ davinci_dvevm                arm         arm926ejs   dvevm               davinci
 davinci_schmoogie            arm         arm926ejs   schmoogie           davinci        davinci
 davinci_sffsdr               arm         arm926ejs   sffsdr              davinci        davinci
 davinci_sonata               arm         arm926ejs   sonata              davinci        davinci
-suen3                        arm         arm926ejs   km_arm              keymile        kirkwood
-suen8                        arm         arm926ejs   km_arm              keymile        kirkwood
+km_kirkwood                  arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood:KM_DISABLE_PCI
+km_kirkwood_pci              arm         arm926ejs   km_arm              keymile        kirkwood	km_kirkwood
 mgcoge3un                    arm         arm926ejs   km_arm              keymile        kirkwood
 guruplug                     arm         arm926ejs   -                   Marvell        kirkwood
 mv88f6281gtw_ge              arm         arm926ejs   -                   Marvell        kirkwood

include/configs/suen3.h → include/configs/km_kirkwood.h

@@ -6,6 +6,9 @@
  * (C) Copyright 2009
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.de
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -30,8 +33,8 @@
  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  */
 
-#ifndef _CONFIG_SUEN3_H
-#define _CONFIG_SUEN3_H
+#ifndef _CONFIG_KM_KIRKWOOD_H
+#define _CONFIG_KM_KIRKWOOD_H
 
 /* include common defines/options for all arm based Keymile boards */
 #include "km/km_arm.h"
@@ -39,11 +42,16 @@
 /*
  * Version number information
  */
-#define CONFIG_IDENT_STRING	"\nKeymile SUEN3"
+#ifdef CONFIG_KM_DISABLE_PCI
+#define CONFIG_IDENT_STRING	"\nKeymile Kirkwood"
+#undef  CONFIG_KIRKWOOD_PCIE_INIT
+#else
+#define CONFIG_IDENT_STRING	"\nKeymile Kirkwood PCI"
+#endif
 
-#define CONFIG_HOSTNAME			suen3
+#define CONFIG_HOSTNAME			km_kirkwood
 
 #define KM_IVM_BUS	"pca9544a:70:9"	/* I2C2 (Mux-Port 1)*/
 #define KM_ENV_BUS	"pca9544a:70:d"	/* I2C2 (Mux-Port 5)*/
 
-#endif /* _CONFIG_SUEN3_H */
+#endif /* _CONFIG_KM_KIRKWOOD */

include/configs/mgcoge3un.h

@@ -76,4 +76,9 @@
 	MVGBE_SET_GMII_SPEED_TO_10_100	|\
 	MVGBE_SET_MII_SPEED_TO_100)
 
+/*
+ * PCIe port not used on mgcoge3un
+ */
+#undef  CONFIG_KIRKWOOD_PCIE_INIT
+
 #endif /* _CONFIG_MGCOGE3UN_H */

include/configs/suen8.h

@@ -1,50 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/* for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html */
-
-#ifndef _CONFIG_SUEN8_H
-#define _CONFIG_SUEN8_H
-
-/* include common defines/options for all arm based Keymile boards */
-#include "km/km_arm.h"
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING	"\nKeymile SUEN8"
-
-#define CONFIG_HOSTNAME			suen8
-
-#define KM_IVM_BUS	"pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
-#define KM_ENV_BUS	"pca9544a:70:d" /* I2C2 (Mux-Port 5)*/
-
-#endif /* _CONFIG_SUEN8_H */