Removed unused CONFIG_L1_INIT_RAM symbol.

Prevent further viral propogation of the unused
symbol CONFIG_L1_INIT_RAM by just removing it.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/MPC8349EMDS.h

@@ -193,7 +193,6 @@
 #define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
 #define CONFIG_SYS_OR1_PRELIM		0xFFFFE8F0		/* length 32K */
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000			/* End of used area in RAM*/

include/configs/MPC8349ITX.h

@@ -266,7 +266,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/

include/configs/MPC8536DS.h

@@ -231,8 +231,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define PIXIS_VCLKL		0x1A	/* VELA VCLKL register */
 #define CONFIG_SYS_PIXIS_VBOOT_MASK	0xc0
 
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_END	0x00004000	/* End of used area in RAM */

include/configs/MPC8540ADS.h

@@ -258,7 +258,6 @@
 #define CONFIG_SYS_OR4_PRELIM		0xffffe1f1
 #define CONFIG_SYS_BCSR		(CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/MPC8540EVAL.h

@@ -161,7 +161,6 @@
 #define CONFIG_SYS_OR4_PRELIM          0xffffe1f1
 #define CONFIG_SYS_BCSR                (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/MPC8541CDS.h

@@ -281,7 +281,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR3_PRELIM   0xf8000801
 #define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */

include/configs/MPC8544DS.h

@@ -207,8 +207,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PIXIS_VCFGEN1_MASK	(PIXIS_VCFGEN1_TSEC1SER|PIXIS_VCFGEN1_TSEC3SER)
 
 
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK      1
 #define CONFIG_SYS_INIT_RAM_ADDR      0xf4010000      /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_END       0x00004000      /* End of used area in RAM */

include/configs/MPC8548CDS.h

@@ -303,7 +303,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR3_PRELIM	 0xf8000801
 #define CONFIG_SYS_OR3_PRELIM	 0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/MPC8555CDS.h

@@ -279,7 +279,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR3_PRELIM   0xf8000801
 #define CONFIG_SYS_OR3_PRELIM   0xfff00ff7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */

include/configs/MPC8560ADS.h

@@ -254,7 +254,6 @@
 #define CONFIG_SYS_OR4_PRELIM		0xffffe1f1
 #define CONFIG_SYS_BCSR		(CONFIG_SYS_BR4_PRELIM & 0xffff8000)
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/MPC8568MDS.h

@@ -265,7 +265,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BR5_PRELIM	 0xf8010801
 #define CONFIG_SYS_OR5_PRELIM	 0xffff69f7
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */

include/configs/MPC8572DS.h

@@ -248,8 +248,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 					| PIXIS_VCFGEN1_TSEC3SER \
 					| PIXIS_VCFGEN1_TSEC4SER)
 
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_END	0x00004000	/* End of used area in RAM */

include/configs/MPC8610HPCD.h

@@ -209,7 +209,6 @@
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */

include/configs/MPC8641HPCN.h

@@ -268,7 +268,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */

include/configs/MVBLM7.h

@@ -130,7 +130,6 @@
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
 #undef	CONFIG_SYS_RAMBOOT
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/

include/configs/PM854.h

@@ -161,7 +161,6 @@
 #define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/PM856.h

@@ -164,7 +164,6 @@
 #define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer prescal*/
 
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/SBC8540.h

@@ -186,7 +186,6 @@
 #define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/TQM834x.h

@@ -171,7 +171,6 @@ extern int tqm834x_num_flash_banks;
 #undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000		/* End of used area in RAM*/

include/configs/TQM85xx.h

@@ -234,7 +234,6 @@
 #define CONFIG_SYS_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
 #define CONFIG_SYS_LBC_MRTPR		0x20000000	/* LB refresh timer presc.*/
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	(CONFIG_SYS_CCSRBAR \
 				 + 0x04010000)	/* Initial RAM address	*/

include/configs/sbc8349.h

@@ -162,7 +162,6 @@
 #undef  CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x1000			/* End of used area in RAM*/

include/configs/sbc8548.h

@@ -280,7 +280,6 @@
 				| CONFIG_SYS_LBC_LSDMR_RFEN		\
 				)
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/sbc8560.h

@@ -180,7 +180,6 @@
 #define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
 /* the size of CS5 needs to be >= 16M for TLB and LAW setups */
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/sbc8641d.h

@@ -244,7 +244,6 @@
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #ifndef CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0fd00000	/* Initial RAM address */

include/configs/socrates.h

@@ -167,7 +167,6 @@
 #define CONFIG_SYS_LBC_LSRT		0x20000000    /* LB sdram refresh timer	*/
 #define CONFIG_SYS_LBC_MRTPR		0x20000000    /* LB refresh timer presc.*/
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End used area in RAM	*/

include/configs/stxgp3.h

@@ -151,7 +151,6 @@
 #define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
 #define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */

include/configs/stxssa.h

@@ -164,7 +164,6 @@
 #define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
 #define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
 
-#define CONFIG_L1_INIT_RAM
 #define CONFIG_SYS_INIT_RAM_LOCK	1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x60000000	/* Initial RAM address	*/
 #define CONFIG_SYS_INIT_RAM_END	0x4000		/* End of used area in RAM */