net: rename "FSL UECx" net interfaces "UECx"

continuation of commit 2ecc2262d66a286e3aac79005bcb5f461312dea8
"net ppc: fix ethernet device names with spaces" (currently in
u-boot-net.git) for QE based parts.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

doc/README.kmeter1

@@ -51,7 +51,7 @@ Keymile kmeter1 Board
 
 	tftp 10000 u-boot.bin
     => run load
-    Using FSL UEC0 device
+    Using UEC0 device
     TFTP from server 192.168.1.1; our IP address is 192.168.205.4
     Filename '/tftpboot/kmeter1/u-boot.bin'.
     Load address: 0x200000

drivers/qe/uec.c

@@ -1367,7 +1367,7 @@ int uec_initialize(bd_t *bis, uec_info_t *uec_info)
 	uec->uec_info = uec_info;
 	uec->dev = dev;
 
-	sprintf(dev->name, "FSL UEC%d", uec_info->uf_info.ucc_num);
+	sprintf(dev->name, "UEC%d", uec_info->uf_info.ucc_num);
 	dev->iobase = 0;
 	dev->priv = (void *)uec;
 	dev->init = uec_init;

drivers/qe/uec_phy.c

@@ -71,8 +71,8 @@
  *                 {name, speed, duplex},
  *
  *     #define CONFIG_SYS_FIXED_PHY_PORTS \
- *                 CONFIG_SYS_FIXED_PHY_PORT("FSL UEC0",SPEED_100,DUPLEX_FULL) \
- *                 CONFIG_SYS_FIXED_PHY_PORT("FSL UEC2",SPEED_100,DUPLEX_HALF)
+ *                 CONFIG_SYS_FIXED_PHY_PORT("UEC0",SPEED_100,DUPLEX_FULL) \
+ *                 CONFIG_SYS_FIXED_PHY_PORT("UEC2",SPEED_100,DUPLEX_HALF)
  */
 
 #ifndef CONFIG_FIXED_PHY
@@ -102,7 +102,7 @@ static const struct fixed_phy_port fixed_phy_port[] = {
  * Example board header file to define bitbang ethernet ports:
  *
  * #define CONFIG_SYS_BITBANG_PHY_PORT(name) name,
- * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("FSL UEC0")
+ * #define CONFIG_SYS_BITBANG_PHY_PORTS CONFIG_SYS_BITBANG_PHY_PORT("UEC0")
 */
 #ifndef CONFIG_SYS_BITBANG_PHY_PORTS
 #define CONFIG_SYS_BITBANG_PHY_PORTS	/* default is an empty array */

include/configs/MPC8323ERDB.h

@@ -338,7 +338,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 
 #define CONFIG_UEC_ETH1		/* ETH3 */
 

include/configs/MPC832XEMDS.h

@@ -353,7 +353,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 
 #define CONFIG_UEC_ETH1		/* ETH3 */
 

include/configs/MPC8360EMDS.h

@@ -390,7 +390,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 #define CONFIG_PHY_MODE_NEED_CHANGE
 
 #define CONFIG_UEC_ETH1		/* GETH1 */

include/configs/MPC8360ERDK.h

@@ -309,7 +309,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 
 #define CONFIG_UEC_ETH1		/* GETH1 */
 

include/configs/MPC8568MDS.h

@@ -313,7 +313,7 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_UEC_ETH
 #ifndef CONFIG_TSEC_ENET
-#define CONFIG_ETHPRIME         "FSL UEC0"
+#define CONFIG_ETHPRIME         "UEC0"
 #endif
 #define CONFIG_PHY_MODE_NEED_CHANGE
 #define CONFIG_eTSEC_MDIO_BUS

include/configs/MPC8569MDS.h

@@ -363,7 +363,7 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME         "FSL UEC0"
+#define CONFIG_ETHPRIME         "UEC0"
 #define CONFIG_PHY_MODE_NEED_CHANGE
 
 #define CONFIG_UEC_ETH1         /* GETH1 */

include/configs/kmeter1.h

@@ -284,7 +284,7 @@
  * QE UEC ethernet configuration
  */
 #define CONFIG_UEC_ETH
-#define CONFIG_ETHPRIME		"FSL UEC0"
+#define CONFIG_ETHPRIME		"UEC0"
 
 #define CONFIG_UEC_ETH1		/* GETH1 */
 #define UEC_VERBOSE_DEBUG	1