MPC512x: factor out common code

Now that we have 3 boards for the MPC512x it turns out that they all
use the very same fixed_sdram() code.

This patch factors out this common code into cpu/mpc512x/fixed_sdram.c
and adds a new header file, include/asm-ppc/mpc512x.h, with some
macros, inline functions and prototype definitions specific to MPC512x
systems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>

board/davedenx/aria/aria.c

@@ -27,6 +27,7 @@
 #include <command.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/mpc512x.h>
 #include <fdt_support.h>
 #ifdef CONFIG_MISC_INIT_R
 #include <i2c.h>
@@ -34,9 +35,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern int mpc5121_diu_init(void);
-extern void ide_set_reset(int idereset);
-
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
 			 CLOCK_SCCR1_LPC_EN |				\
@@ -53,14 +51,9 @@ extern void ide_set_reset(int idereset);
 			 CLOCK_SCCR2_DIU_EN |		\
 			 CLOCK_SCCR2_I2C_EN)
 
-#define CSAW_START(start)	((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size)	(((start) + (size) - 1) >> 16)
-
-long int fixed_sdram(void);
-
 int board_early_init_f(void)
 {
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 	u32 spridr;
 
 	/*
@@ -71,14 +64,7 @@ int board_early_init_f(void)
 		CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE)
 	);
 	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
-	/*
-	 * According to MPC5121e RM, configuring local access windows should
-	 * be followed by a dummy read of the config register that was
-	 * modified last and an isync
-	 */
-	in_be32(&im->sysconf.lpcs2aw);
-	__asm__ __volatile__ ("isync");
+	sync_law(&im->sysconf.lpcs2aw);
 
 	/*
 	 * Initialize Local Window for the On Board SRAM access
@@ -88,14 +74,7 @@ int board_early_init_f(void)
 		CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE)
 	);
 	out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG);
-
-	/*
-	 * According to MPC5121e RM, configuring local access windows should
-	 * be followed by a dummy read of the config register that was
-	 * modified last and an isync
-	 */
-	in_be32(&im->sysconf.lpcs6aw);
-	__asm__ __volatile__ ("isync");
+	sync_law(&im->sysconf.lpcs6aw);
 
 	/*
 	 * Configure Flash Speed
@@ -124,100 +103,6 @@ phys_size_t initdram (int board_type)
 	return fixed_sdram();
 }
 
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram (void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-	u32 msize_log2 = __ilog2(msize);
-	u32 i;
-
-	/* Initialize IO Control */
-	out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
-	/* Initialize DDR Local Window */
-	out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
-	out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
-
-	/*
-	 * According to MPC5121e RM, configuring local access windows should
-	 * be followed by a dummy read of the config register that was
-	 * modified last and an isync
-	 */
-	in_be32(&im->sysconf.ddrlaw.ar);
-	__asm__ __volatile__ ("isync");
-
-	/* Enable DDR */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
-	/* Initialize DDR Priority Manager */
-	out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
-	out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
-	out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
-	out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
-	out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
-	out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
-	out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
-	out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
-	out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
-	out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
-	out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
-	out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
-	out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
-	out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
-	out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
-	out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
-	out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
-	out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
-	out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
-	out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
-	out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
-	out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
-	out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
-	/* Initialize MDDRC */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
-	out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
-	out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
-	/* Initialize DDR */
-	for (i = 0; i < 10; i++)
-		out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	/* Start MDDRC */
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
-
-	return msize;
-}
-
 int misc_init_r(void)
 {
 	u32 tmp;
@@ -295,7 +180,6 @@ static  iopin_t ioregs_init[] = {
 	},
 };
 
-
 int checkboard (void)
 {
 	puts("Board: ARIA\n");

board/esd/mecp5123/mecp5123.c

@@ -28,6 +28,7 @@
 #include <command.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/mpc512x.h>
 #include <fdt_support.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -46,9 +47,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SCCR2_CLOCKS_EN	(CLOCK_SCCR2_MEM_EN |	\
 			 CLOCK_SCCR2_I2C_EN)
 
-#define CSAW_START(start)	((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size)	(((start) + (size) - 1) >> 16)
-
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
 	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
@@ -61,18 +59,7 @@ int eeprom_write_enable(unsigned dev_addr, int state)
 	else
 		clrbits_be32(&im->gpio.gpdat, 0x00100000);
 
-return 0;
-}
-
-/*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync.
- */
-static inline void sync_law(volatile void *addr)
-{
-	in_be32(addr);
-	__asm__ __volatile__ ("isync");
+	return 0;
 }
 
 int board_early_init_f(void)
@@ -146,93 +133,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram(void)
-{
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-	u32 msize_log2 = __ilog2(msize);
-	u32 i;
-
-	/* Initialize IO Control */
-	out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
-	/* Initialize DDR Local Window */
-	out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
-	out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
-	sync_law(&im->sysconf.ddrlaw.ar);
-
-	/* Enable DDR */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
-	/* Initialize DDR Priority Manager */
-	out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
-	out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
-	out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
-	out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
-	out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
-	out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
-	out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
-	out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
-	out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
-	out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
-	out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
-	out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
-	out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
-	out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
-	out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
-	out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
-	out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
-	out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
-	out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
-	out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
-	out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
-	out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
-	out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
-	/* Initialize MDDRC */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
-	out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
-	out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
-	/* Initialize DDR */
-	for (i = 0; i < 10; i++)
-		out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	/* Start MDDRC */
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
-
-	return msize;
-}
-
 phys_size_t initdram(int board_type)
 {
 	return get_ram_size(0, fixed_sdram());

board/freescale/mpc5121ads/mpc5121ads.c

@@ -26,6 +26,7 @@
 #include <command.h>
 #include <asm/io.h>
 #include <asm/processor.h>
+#include <asm/mpc512x.h>
 #include <fdt_support.h>
 #ifdef CONFIG_MISC_INIT_R
 #include <i2c.h>
@@ -36,9 +37,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern int mpc5121_diu_init(void);
-extern void ide_set_reset(int idereset);
-
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
 			 CLOCK_SCCR1_DDR_EN |				\
@@ -56,10 +54,6 @@ extern void ide_set_reset(int idereset);
 			 CLOCK_SCCR2_MEM_EN |		\
 			 CLOCK_SCCR2_SPDIF_EN)
 
-#define CSAW_START(start)	((start) & 0xFFFF0000)
-#define CSAW_STOP(start, size)	(((start) + (size) - 1) >> 16)
-
-long int fixed_sdram(void);
 void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
 
 /* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
@@ -84,10 +78,10 @@ void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
 	out_8(csreg, v);
 }
 
-int board_early_init_f (void)
+int board_early_init_f(void)
 {
 	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 lpcaw, spridr;
+	u32 spridr;
 
 	/*
 	 * Initialize Local Window for the CPLD registers access (CS2 selects
@@ -98,14 +92,7 @@ int board_early_init_f (void)
 		CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
 	);
 	out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
-
-	/*
-	 * According to MPC5121e RM, configuring local access windows should
-	 * be followed by a dummy read of the config register that was
-	 * modified last and an isync
-	 */
-	lpcaw = in_be32(&im->sysconf.lpcs6aw);
-	__asm__ __volatile__ ("isync");
+	sync_law(&im->sysconf.lpcs2aw);
 
 	/*
 	 * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
@@ -146,104 +133,11 @@ int board_early_init_f (void)
 	return 0;
 }
 
-phys_size_t initdram (int board_type)
+phys_size_t initdram(int board_type)
 {
 	u32 msize = 0;
 
-	msize = fixed_sdram ();
-
-	return msize;
-}
-
-/*
- * fixed sdram init -- the board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram (void)
-{
-	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-	u32 msize_log2 = __ilog2 (msize);
-	u32 i;
-
-	/* Initialize IO Control */
-	out_be32 (&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
-	/* Initialize DDR Local Window */
-	out_be32 (&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
-	out_be32 (&im->sysconf.ddrlaw.ar, msize_log2 - 1);
-
-	/*
-	 * According to MPC5121e RM, configuring local access windows should
-	 * be followed by a dummy read of the config register that was
-	 * modified last and an isync
-	 */
-	in_be32(&im->sysconf.ddrlaw.ar);
-	__asm__ __volatile__ ("isync");
-
-	/* Enable DDR */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
-
-	/* Initialize DDR Priority Manager */
-	out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
-	out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
-	out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
-	out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
-	out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
-	out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
-	out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
-	out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
-	out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
-	out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
-	out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
-	out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
-	out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
-	out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
-	out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
-	out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
-	out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
-	out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
-	out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
-	out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
-	out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
-	out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
-	out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
-	/* Initialize MDDRC */
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
-	out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
-	out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
-
-	/* Initialize DDR */
-	for (i = 0; i < 10; i++)
-		out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
-	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
-
-	/* Start MDDRC */
-	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
-	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
+	msize = fixed_sdram();
 
 	return msize;
 }

cpu/mpc512x/Makefile

@@ -27,7 +27,15 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common)
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
-COBJS-y	:= traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o
+COBJS-y	:= cpu.o
+COBJS-y	+= traps.o
+COBJS-y += cpu_init.o
+COBJS-y += fixed_sdram.o
+COBJS-y += i2c.o
+COBJS-y += interrupts.o
+COBJS-y += iopin.o
+COBJS-y += serial.o
+COBJS-y += speed.o
 COBJS-${CONFIG_FSL_DIU_FB} += diu.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o
 COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o

cpu/mpc512x/fixed_sdram.c

@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/mpc512x.h>
+
+/*
+ * fixed sdram init:
+ * The board doesn't use memory modules that have serial presence
+ * detect or similar mechanism for discovery of the DRAM settings
+ */
+long int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
+	u32 msize_log2 = __ilog2(msize);
+	u32 i;
+
+	/* Initialize IO Control */
+	out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
+
+	/* Initialize DDR Local Window */
+	out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
+	out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
+	sync_law(&im->sysconf.ddrlaw.ar);
+
+	/* Enable DDR */
+	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN);
+
+	/* Initialize DDR Priority Manager */
+	out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
+	out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
+	out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
+	out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
+	out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
+	out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
+	out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
+	out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
+	out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
+	out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
+	out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
+	out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
+	out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
+	out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
+	out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
+	out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
+	out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
+	out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
+	out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
+	out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
+	out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
+	out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
+	out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
+
+	/* Initialize MDDRC */
+	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG);
+	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0);
+	out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1);
+	out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2);
+
+	/* Initialize DDR */
+	for (i = 0; i < 10; i++)
+		out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL);
+	out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP);
+
+	/* Start MDDRC */
+	out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN);
+	out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN);
+
+	return msize;
+}

include/asm-ppc/mpc512x.h

@@ -0,0 +1,57 @@
+/*
+ * include/asm-ppc/mpc512x.h
+ *
+ * Prototypes, etc. for the Freescale MPC512x embedded cpu chips
+ *
+ * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASMPPC_MPC512X_H
+#define __ASMPPC_MPC512X_H
+
+/*
+ * macros for manipulating CSx_START/STOP
+ */
+#define CSAW_START(start)	((start) & 0xFFFF0000)
+#define CSAW_STOP(start, size)	(((start) + (size) - 1) >> 16)
+
+/*
+ * Inlines
+ */
+
+/*
+ * According to MPC5121e RM, configuring local access windows should
+ * be followed by a dummy read of the config register that was
+ * modified last and an isync.
+ */
+static inline void sync_law(volatile void *addr)
+{
+	in_be32(addr);
+	__asm__ __volatile__ ("isync");
+}
+
+/*
+ * Prototypes
+ */
+extern long int fixed_sdram(void);
+extern int mpc5121_diu_init(void);
+extern void ide_set_reset(int idereset);
+
+#endif /* __ASMPPC_MPC512X_H */