BeagleBoard: Added LED driver

Added LED driver using status_led.  USR0 is set to monitor the boot
status.  USR1 is set to be the green LED.

Included adding configuration and command to the default configuration.

Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

board/ti/beagle/Makefile

@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= beagle.o
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_STATUS_LED) += led.o
 
+COBJS	:= $(sort $(COBJS-y))
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

board/ti/beagle/beagle.c

@@ -30,6 +30,9 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
 #include <twl4030.h>
 #include <asm/io.h>
 #include <asm/arch/mmc_host_def.h>
@@ -74,6 +77,10 @@ int board_init(void)
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+	status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
+
 	return 0;
 }
 

board/ti/beagle/led.c

@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2010 Texas Instruments, Inc.
+ * Jason Kridner <jkridner@beagleboard.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <status_led.h>
+#include <asm/arch/cpu.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/gpio.h>
+
+static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
+
+/* GPIO pins for the LEDs */
+#define BEAGLE_LED_USR0	149
+#define BEAGLE_LED_USR1	150
+
+#ifdef STATUS_LED_GREEN
+void green_LED_off (void)
+{
+	__led_set (STATUS_LED_GREEN, 0);
+}
+
+void green_LED_on (void)
+{
+	__led_set (STATUS_LED_GREEN, 1);
+}
+#endif
+
+void __led_init (led_id_t mask, int state)
+{
+	__led_set (mask, state);
+}
+
+void __led_toggle (led_id_t mask)
+{
+#ifdef STATUS_LED_BIT
+	if (STATUS_LED_BIT & mask) {
+		if (STATUS_LED_ON == saved_state[0])
+			__led_set(STATUS_LED_BIT, 0);
+		else
+			__led_set(STATUS_LED_BIT, 1);
+	}
+#endif
+#ifdef STATUS_LED_BIT1
+	if (STATUS_LED_BIT1 & mask) {
+		if (STATUS_LED_ON == saved_state[1])
+			__led_set(STATUS_LED_BIT1, 0);
+		else
+			__led_set(STATUS_LED_BIT1, 1);
+	}
+#endif
+}
+
+void __led_set (led_id_t mask, int state)
+{
+#ifdef STATUS_LED_BIT
+	if (STATUS_LED_BIT & mask) {
+		if (!omap_request_gpio(BEAGLE_LED_USR0)) {
+			omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
+			omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
+		}
+		saved_state[0] = state;
+	}
+#endif
+#ifdef STATUS_LED_BIT1
+	if (STATUS_LED_BIT1 & mask) {
+		if (!omap_request_gpio(BEAGLE_LED_USR1)) {
+			omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
+			omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
+		}
+		saved_state[1] = state;
+	}
+#endif
+}
+

include/configs/omap3_beagle.h

@@ -108,6 +108,18 @@
 #define CONFIG_OMAP_HSMMC		1
 #define CONFIG_DOS_PARTITION		1
 
+/* Status LED */
+#define CONFIG_STATUS_LED		1
+#define CONFIG_BOARD_SPECIFIC_LED	1
+#define STATUS_LED_BIT			0x01
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BIT1			0x02
+#define STATUS_LED_STATE1		STATUS_LED_ON
+#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT			STATUS_LED_BIT
+#define STATUS_LED_GREEN		STATUS_LED_BIT1
+
 /* DDR - I use Micron DDR */
 #define CONFIG_OMAP3_MICRON_DDR		1
 
@@ -138,6 +150,7 @@
 #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
 #define CONFIG_CMD_MMC		/* MMC support			*/
 #define CONFIG_CMD_NAND		/* NAND support			*/
+#define CONFIG_CMD_LED		/* LED support			*/
 
 #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
 #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/