TQM8xx: enable device tree support on all TQM8xx based boards.

Also enable support for CONFIG_HWCONFIG because we use this for
configuring if this hardware has a FEC or not.

syntax:

hwconfig=fec:on   if hardware has an fec
hwconfig=fec:off  if hardware has no fec

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>

include/configs/FPS850L.h

@@ -437,4 +437,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/FPS860L.h

@@ -439,4 +439,9 @@
 
 #define CONFIG_SCC1_ENET
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/HMI10.h

@@ -496,4 +496,9 @@
 #define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/NSCU.h

@@ -487,4 +487,9 @@
 #define CONFIG_FEC_ENET
 /* #define CONFIG_ETHPRIME		"FEC ETHERNET" */
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/SM850.h

@@ -372,4 +372,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TK885D.h

@@ -516,4 +516,9 @@
 #define CONFIG_NET_RETRY_COUNT	3
 #define CONFIG_ETHPRIME		"FEC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM823L.h

@@ -490,4 +490,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM823M.h

@@ -486,4 +486,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM850L.h

@@ -475,4 +475,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM850M.h

@@ -475,4 +475,9 @@
 #define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
 #define BOOTFLAG_WARM	0x02		/* Software reboot			*/
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM855L.h

@@ -483,4 +483,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM855M.h

@@ -518,4 +518,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM860L.h

@@ -482,4 +482,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM860M.h

@@ -486,4 +486,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM862L.h

@@ -488,4 +488,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM862M.h

@@ -489,4 +489,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM866M.h

@@ -508,4 +508,9 @@
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/TQM885D.h

@@ -508,4 +508,9 @@
 
 #define CONFIG_ETHPRIME		"SCC ETHERNET"
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */

include/configs/virtlab2.h

@@ -491,4 +491,10 @@
 						OR_SCY_2_CLK)
 #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V)
 #define PCMCIA_CTRL (CONFIG_SYS_PERIPHERAL_BASE + 0xB00)
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#define CONFIG_HWCONFIG		1
+
 #endif	/* __CONFIG_H */