* Patch by Stephen Williams, 19 March 2004

  Increase speed of sector reads from SystemACE,
  shorten poll timeout and remove a useless reset

* Patch by Tolunay Orkun, 19 Mar 2004:
  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
  (CONFIG_PHY_GIGE)

* Patch by Brad Kemp, 18 Mar 2004:
  prevent machine checks during a PCI scan

* Patch by Pierre Aubert, 18 Mar 2004:
  Fix string cleaning in IDE identification

CHANGELOG

@@ -2,6 +2,20 @@
 Changes for U-Boot 1.0.2:
 ======================================================================
 
+* Patch by Stephen Williams, 19 March 2004
+  Increase speed of sector reads from SystemACE,
+  shorten poll timeout and remove a useless reset
+
+* Patch by Tolunay Orkun, 19 Mar 2004:
+  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
+  (CONFIG_PHY_GIGE)
+
+* Patch by Brad Kemp, 18 Mar 2004:
+  prevent machine checks during a PCI scan
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+  Fix string cleaning in IDE identification
+
 * Patch by Pierre Aubert, 18 Mar 2004:
   - Unify video mode handling for Chips & Technologies 69000 Video
     chip and Silicon Motion SMI 712/710/810 Video chip

common/cmd_ace.c

@@ -190,16 +190,13 @@ static unsigned long systemace_read(int dev,
 	      /* Write sector count | ReadMemCardData. */
 	    ace_writew((trans&0xff) | 0x0300, 0x14);
 
-	      /* CONTROLREG = CFGRESET|LOCKREQ */
-	    ace_writew(0x0082, 0x18);
-
 	    retry = trans * 16;
 	    while (retry > 0) {
 		  int idx;
 
 		    /* Wait for buffer to become ready. */
 		  while (! (ace_readw(0x04) & 0x0020)) {
-			udelay(1000);
+			udelay(100);
 		  }
 
 		    /* Read 16 words of 2bytes from the sector buffer. */

common/cmd_ide.c

@@ -1417,7 +1417,7 @@ static void ident_cpy (unsigned char *dst, unsigned char *src, unsigned int len)
 	unsigned char *end, *last;
 
 	last = dst;
-	end  = src + len;
+	end  = src + len - 1;
 
 	/* reserve space for '\0' */
 	if (len < 2)

common/miiphyutil.c

@@ -135,6 +135,7 @@ int miiphy_speed (unsigned char addr)
 {
 	unsigned short reg;
 
+#if defined(CONFIG_PHY_GIGE)
 	if (miiphy_read (addr, PHY_1000BTSR, &reg)) {
 		printf ("PHY 1000BT Status read failed\n");
 	} else {
@@ -144,6 +145,7 @@ int miiphy_speed (unsigned char addr)
 			}
 		}
 	}
+#endif /* CONFIG_PHY_GIGE */
 
 	if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
 		puts ("PHY speed1 read failed, assuming 10bT\n");
@@ -165,7 +167,7 @@ int miiphy_duplex (unsigned char addr)
 {
 	unsigned short reg;
 
-
+#if defined(CONFIG_PHY_GIGE)
 	if (miiphy_read (addr, PHY_1000BTSR, &reg)) {
 		printf ("PHY 1000BT Status read failed\n");
 	} else {
@@ -178,6 +180,7 @@ int miiphy_duplex (unsigned char addr)
 			}
 		}
 	}
+#endif /* CONFIG_PHY_GIGE */
 
 	if (miiphy_read (addr, PHY_ANLPAR, &reg)) {
 		puts ("PHY duplex read failed, assuming half duplex\n");

cpu/mpc8260/traps.c

@@ -140,7 +140,7 @@ MachineCheckException(struct pt_regs *regs)
 	dump_pci();
 #endif
 	/* clear the error in the error status register */
-	if(immap->im_pci.pci_esr && cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
+	if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
 		immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
 		return;
 	}

include/configs/OCOTEA.h

@@ -150,6 +150,7 @@
 #define CONFIG_PHY2_ADDR	0x10
 #define CONFIG_PHY3_ADDR	0x18
 #define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CONFIG_NETMASK		255.255.255.0
 #define CONFIG_IPADDR		10.1.2.3
 #define CONFIG_ETHADDR		00:04:AC:E3:28:8A

include/configs/XPEDITE1K.h

@@ -174,6 +174,7 @@ extern void out32(unsigned int, unsigned long);
 #define CONFIG_PHY2_ADDR	4	/* PHY address phy2 */
 #define CONFIG_PHY3_ADDR	8	/* PHY address phy3 */
 #define CONFIG_NET_MULTI	1
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #define CFG_RX_ETH_BUFFER   32	/* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \