Kaynağa Gözat

Section name should be ".data", not "data"

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Trent Piepho 16 yıl önce
ebeveyn
işleme
5e3ab68e9a
4 değiştirilmiş dosya ile 8 ekleme ve 10 silme
  1. 1 1
      cpu/mpc8260/i2c.c
  2. 3 4
      cpu/ppc4xx/i2c.c
  3. 3 4
      drivers/i2c/fsl_i2c.c
  4. 1 1
      drivers/i2c/soft_i2c.c

+ 1 - 1
cpu/mpc8260/i2c.c

@@ -37,7 +37,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
 #endif /* CONFIG_I2C_MULTI_BUS */
 
 /* uSec to wait between polls of the i2c */

+ 3 - 4
cpu/ppc4xx/i2c.c

@@ -42,11 +42,10 @@ DECLARE_GLOBAL_DATA_PTR;
  * runs from ROM, and we can't switch buses because we can't modify
  * the global variables.
  */
-#ifdef CONFIG_SYS_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
-#else
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM	0
 #endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
 #endif /* CONFIG_I2C_MULTI_BUS */
 
 static void _i2c_bus_reset(void)

+ 3 - 4
drivers/i2c/fsl_i2c.c

@@ -38,11 +38,10 @@ DECLARE_GLOBAL_DATA_PTR;
  * runs from ROM, and we can't switch buses because we can't modify
  * the global variables.
  */
-#ifdef CONFIG_SYS_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
-#else
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#ifndef CONFIG_SYS_SPD_BUS_NUM
+#define CONFIG_SYS_SPD_BUS_NUM 0
 #endif
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM;
 
 static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SPEED};
 

+ 1 - 1
drivers/i2c/soft_i2c.c

@@ -73,7 +73,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #endif
 
 #if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
 #endif /* CONFIG_I2C_MULTI_BUS */
 
 /*-----------------------------------------------------------------------