x86: Allow compiling out realmode/bios code

We don't want this for coreboot, so provide a way of compiling it out.

Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

README

@@ -3668,6 +3668,12 @@ Low Level (hardware related) configuration options:
 		If defined, the x86 reset vector code is excluded. You will need
 		to do this when U-Boot is running from Coreboot.
 
+- CONFIG_X86_NO_REAL_MODE
+		If defined, x86 real mode code is omitted. This assumes a
+		32-bit environment where such code is not needed. You will
+		need to do this when U-Boot is running from Coreboot.
+
+
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 

arch/x86/lib/Makefile

@@ -25,11 +25,16 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(ARCH).o
 
+ifeq ($(CONFIG_X86_NO_REAL_MODE),)
 SOBJS-$(CONFIG_SYS_PC_BIOS)	+= bios.o
 SOBJS-$(CONFIG_SYS_PCI_BIOS)	+= bios_pci.o
-SOBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode_switch.o
+COBJS-y	+= realmode.o
+SOBJS-y	+= realmode_switch.o
 
 COBJS-$(CONFIG_SYS_PC_BIOS)	+= bios_setup.o
+COBJS-$(CONFIG_VIDEO)	+= video_bios.o
+endif
+
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
 COBJS-y	+= cmd_boot.o
@@ -41,11 +46,9 @@ COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o
 COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o
 COBJS-$(CONFIG_PCI) += pci.o
 COBJS-$(CONFIG_PCI) += pci_type1.o
-COBJS-$(CONFIG_SYS_X86_REALMODE)	+= realmode.o
 COBJS-y	+= relocate.o
 COBJS-y	+= string.o
 COBJS-$(CONFIG_SYS_X86_ISR_TIMER)	+= timer.o
-COBJS-$(CONFIG_VIDEO)	+= video_bios.o
 COBJS-$(CONFIG_VIDEO)	+= video.o
 COBJS-$(CONFIG_CMD_ZBOOT)	+= zimage.o
 

arch/x86/lib/video.c

@@ -222,8 +222,10 @@ int video_init(void)
 
 int drv_video_init(void)
 {
+#ifndef CONFIG_X86_NO_REAL_MODE
 	if (video_bios_init())
 		return 1;
+#endif
 
 	return video_init();
 }

arch/x86/lib/zimage.c

@@ -171,7 +171,7 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size,
 	else
 		*load_address = (void *)ZIMAGE_LOAD_ADDR;
 
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
 	printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
 	memset(setup_base, 0, sizeof(*setup_base));
 	setup_base->hdr = params->hdr;
@@ -237,7 +237,7 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
 	struct setup_header *hdr = &setup_base->hdr;
 	int bootproto = get_boot_protocol(hdr);
 
-#if defined CONFIG_ZBOOT_32
+#if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
 	setup_base->e820_entries = install_e820_map(
 		ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
 #endif