Merge with git://www.denx.de/git/u-boot.git

Makefile

@@ -1666,15 +1666,18 @@ MPC8313ERDB_66_config: unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "...33M ..." ; \
+		echo -n "...33M ..." ; \
 		echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "...66M..." ; \
+		echo -n "...66M..." ; \
 		echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
 
+MPC8323ERDB_config:	unconfig
+	@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
@@ -1682,7 +1685,7 @@ MPC832XEMDS_SLAVE_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "... PCI HOST " ; \
+		echo -n "... PCI HOST " ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
@@ -1691,11 +1694,11 @@ MPC832XEMDS_SLAVE_config:	unconfig
 		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "...33M ..." ; \
+		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "...66M..." ; \
+		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
@@ -1724,7 +1727,7 @@ MPC8360EMDS_SLAVE_config:	unconfig
 	@mkdir -p $(obj)include
 	@echo "" >$(obj)include/config.h ; \
 	if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "... PCI HOST " ; \
+		echo -n "... PCI HOST " ; \
 		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _SLAVE_,$@)" ] ; then \
@@ -1733,11 +1736,11 @@ MPC8360EMDS_SLAVE_config:	unconfig
 		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "...33M ..." ; \
+		echo -n "...33M ..." ; \
 		echo "#define PCI_33M" >>$(obj)include/config.h ; \
 	fi ; \
 	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "...66M..." ; \
+		echo -n "...66M..." ; \
 		echo "#define PCI_66M" >>$(obj)include/config.h ; \
 	fi ;
 	@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds

board/freescale/mpc8323erdb/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

board/freescale/mpc8323erdb/config.mk

@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8323ERDB
+#
+
+TEXT_BASE = 0xFE000000

board/freescale/mpc8323erdb/mpc8323erdb.c

@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Michael Barkowski <michael.barkowski@freescale.com>
+ * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#include <libfdt.h>
+#include <libfdt_env.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* UCC3 */
+	{1,  0, 1, 0, 1}, /* TxD0 */
+	{1,  1, 1, 0, 1}, /* TxD1 */
+	{1,  2, 1, 0, 1}, /* TxD2 */
+	{1,  3, 1, 0, 1}, /* TxD3 */
+	{1,  9, 1, 0, 1}, /* TxER */
+	{1, 12, 1, 0, 1}, /* TxEN */
+	{3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
+
+	{1,  4, 2, 0, 1}, /* RxD0 */
+	{1,  5, 2, 0, 1}, /* RxD1 */
+	{1,  6, 2, 0, 1}, /* RxD2 */
+	{1,  7, 2, 0, 1}, /* RxD3 */
+	{1,  8, 2, 0, 1}, /* RxER */
+	{1, 10, 2, 0, 1}, /* RxDV */
+	{0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
+	{1, 11, 2, 0, 1}, /* COL */
+	{1, 13, 2, 0, 1}, /* CRS */
+
+	/* UCC2 */
+	{0, 18, 1, 0, 1}, /* TxD0 */
+	{0, 19, 1, 0, 1}, /* TxD1 */
+	{0, 20, 1, 0, 1}, /* TxD2 */
+	{0, 21, 1, 0, 1}, /* TxD3 */
+	{0, 27, 1, 0, 1}, /* TxER */
+	{0, 30, 1, 0, 1}, /* TxEN */
+	{3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
+
+	{0, 22, 2, 0, 1}, /* RxD0 */
+	{0, 23, 2, 0, 1}, /* RxD1 */
+	{0, 24, 2, 0, 1}, /* RxD2 */
+	{0, 25, 2, 0, 1}, /* RxD3 */
+	{0, 26, 1, 0, 1}, /* RxER */
+	{0, 28, 2, 0, 1}, /* Rx_DV */
+	{3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
+	{0, 29, 2, 0, 1}, /* COL */
+	{0, 31, 2, 0, 1}, /* CRS */
+
+	{3,  4, 3, 0, 2}, /* MDIO */
+	{3,  5, 1, 0, 2}, /* MDC */
+
+	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+int board_early_init_f(void)
+{
+	return 0;
+}
+
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	u32 msize = 0;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+		return -1;
+
+	/* DDR SDRAM - Main SODIMM */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+
+	msize = fixed_sdram();
+
+	puts("\n   DDR RAM: ");
+
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return (msize * 1024 * 1024);
+}
+
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *) CFG_IMMR;
+	u32 msize = 0;
+	u32 ddr_size;
+	u32 ddr_size_log2;
+
+	msize = CFG_DDR_SIZE;
+	for (ddr_size = msize << 20, ddr_size_log2 = 0;
+	     (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+		if (ddr_size & 1) {
+			return -1;
+		}
+	}
+	im->sysconf.ddrlaw[0].ar =
+	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+	im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+	im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+	im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+	im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+	im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+	im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+	im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+	im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+	im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+	im->ddr.sdram_mode = CFG_DDR_MODE;
+	im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+	im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+	__asm__ __volatile__ ("sync");
+	udelay(200);
+
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+	__asm__ __volatile__ ("sync");
+	return msize;
+}
+
+int checkboard(void)
+{
+	puts("Board: Freescale MPC8323ERDB\n");
+	return 0;
+}
+
+static struct pci_region pci_regions[] = {
+	{
+		bus_start: CFG_PCI1_MEM_BASE,
+		phys_start: CFG_PCI1_MEM_PHYS,
+		size: CFG_PCI1_MEM_SIZE,
+		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+	},
+	{
+		bus_start: CFG_PCI1_MMIO_BASE,
+		phys_start: CFG_PCI1_MMIO_PHYS,
+		size: CFG_PCI1_MMIO_SIZE,
+		flags: PCI_REGION_MEM
+	},
+	{
+		bus_start: CFG_PCI1_IO_BASE,
+		phys_start: CFG_PCI1_IO_PHYS,
+		size: CFG_PCI1_IO_SIZE,
+		flags: PCI_REGION_IO
+	}
+};
+
+void pci_init_board(void)
+{
+	volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+	volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+	volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+	struct pci_region *reg[] = { pci_regions };
+
+	/* Enable all 3 PCI_CLK_OUTPUTs. */
+	clk->occr |= 0xe0000000;
+
+	/* Configure PCI Local Access Windows */
+	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+	pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+	pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+	mpc83xx_pci_init(1, reg, 0);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+/*
+ * Prototypes of functions that we use.
+ */
+void ft_cpu_setup(void *blob, bd_t *bd);
+
+#ifdef CONFIG_PCI
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int tmp[2];
+
+	nodeoffset = fdt_find_node_by_path(blob, "/memory");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(bd->bi_memstart);
+		tmp[1] = cpu_to_be32(bd->bi_memsize);
+		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
+	}
+
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_PCI
+	ft_pci_setup(blob, bd);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */

board/mpc8349emds/mpc8349emds.c

@@ -29,7 +29,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_SPD_EEPROM)
 #include <spd_sdram.h>
 #endif
@@ -258,332 +257,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-			(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-			(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-			ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-			(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-			ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-			(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-			(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-			ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-		ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf("  Data Beat Number: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-			(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-			ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr, count, val64;
-	register u64 *i;
-
-	if (argc > 4) {
-		printf ("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__ ("sync");
-			__asm__ __volatile__ ("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-
-	if (argc == 4) {
-		if (strcmp(argv[1], "test") == 0) {
-			addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32)addr % 8) {
-				printf("Address not alligned on double word boundary\n");
-				return 1;
-			}
-
-			disable_interrupts();
-			icache_disable();
-
-			for (i = addr; i < addr + count; i++) {
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* write memory location injecting errors */
-				*i = 0x1122334455667788ULL;
-				__asm__ __volatile__ ("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* read data, this generates ECC error */
-				val64 = *i;
-				__asm__ __volatile__ ("sync");
-
-				/* disable errors for ECC */
-				ddr->err_disable |= ~ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-
-				/* re-initialize memory, write the location again
-				 * NOT injecting errors this time */
-				*i = 0xcafecafecafecafeULL;
-				__asm__ __volatile__ ("sync");
-
-				/* enable errors for ECC */
-				ddr->err_disable &= ECC_ERROR_ENABLE;
-				__asm__ __volatile__ ("sync");
-				__asm__ __volatile__ ("isync");
-			}
-
-			icache_enable();
-			enable_interrupts();
-
-			return 0;
-		}
-	}
-
-	printf ("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(
-	ecc,     4,     0,      do_ecc,
-	"ecc     - support for DDR ECC features\n",
-	"status              - print out status info\n"
-	"ecc captureclear        - clear capture regs data\n"
-	"ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	"ecc sbethr <val>        - set Single-Bit Threshold\n"
-	"ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	"  [-|+]sbe - Single-Bit Error\n"
-	"  [-|+]mbe - Multiple-Bit Error\n"
-	"  [-|+]mse - Memory Select Error\n"
-	"  [-|+]all - all errors\n"
-	"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	"  mme - Multiple Memory Errors\n"
-	"  sbe - Single-Bit Error\n"
-	"  mbe - Multiple-Bit Error\n"
-	"  mse - Memory Select Error\n"
-	"  all - all errors\n"
-	"ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	"ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	"ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	"ecc inject <en|dis>    - enable/disable error injection\n"
-	"ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	"ecc test <addr> <cnt>  - test mem region:\n"
-	"  - enables injects\n"
-	"  - writes pattern injecting errors\n"
-	"  - disables injects\n"
-	"  - reads pattern back, generates error\n"
-	"  - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
 void
 ft_board_setup(void *blob, bd_t *bd)

board/mpc8349itx/config.mk

@@ -29,9 +29,3 @@ sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 ifndef TEXT_BASE
 TEXT_BASE  =   0xFEF00000
 endif
-
-ifneq ($(OBJTREE),$(SRCTREE))
-# We are building u-boot in a separate directory, use generated
-# .lds script from OBJTREE directory.
-LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
-endif

board/mpc8360emds/mpc8360emds.c

@@ -1,8 +1,6 @@
 /*
  * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
  * Dave Liu <daveliu@freescale.com>
- * based on board/mpc8349emds/mpc8349emds.c
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -19,7 +17,6 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
-#include <command.h>
 #if defined(CONFIG_PCI)
 #include <pci.h>
 #endif
@@ -30,8 +27,7 @@
 #endif
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <libfdt_env.h>
 #endif
@@ -103,7 +99,9 @@ int board_early_init_f(void)
 
 	/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
 	if (immr->sysconf.spridr == SPR_8360_REV20 ||
-	    immr->sysconf.spridr == SPR_8360E_REV20)
+	    immr->sysconf.spridr == SPR_8360E_REV20 ||
+	    immr->sysconf.spridr == SPR_8360_REV21 ||
+	    immr->sysconf.spridr == SPR_8360E_REV21)
 		bcsr[0xe] = 0x30;
 
 	return 0;
@@ -287,381 +285,6 @@ void sdram_init(void)
 }
 #endif
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-
-	printf("\nECC mode: %s\n\n",
-	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
-	/* Interrupts */
-	printf("Memory Error Interrupt Enable:\n");
-	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
-	printf("  Single-Bit Error Interrupt Enable: %d\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
-	printf("  Memory Select Error Interrupt Enable: %d\n\n",
-	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
-	/* Error disable */
-	printf("Memory Error Disable:\n");
-	printf("  Multiple-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
-	printf("  Sinle-Bit Error Disable: %d\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
-	printf("  Memory Select Error Disable: %d\n\n",
-	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
-	/* Error injection */
-	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
-	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
-	printf("Memory Data Path Error Injection Mask ECC:\n");
-	printf("  ECC Mirror Byte: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
-	printf("  ECC Injection Enable: %d\n",
-	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
-	printf("  ECC Error Injection Mask: 0x%02x\n\n",
-	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
-	/* SBE counter/threshold */
-	printf("Memory Single-Bit Error Management (0..255):\n");
-	printf("  Single-Bit Error Threshold: %d\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
-	printf("  Single-Bit Error Counter: %d\n\n",
-	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
-	/* Error detect */
-	printf("Memory Error Detect:\n");
-	printf("  Multiple Memory Errors: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
-	printf("  Multiple-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
-	printf("  Single-Bit Error: %d\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
-	printf("  Memory Select Error: %d\n\n",
-	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
-	/* Capture data */
-	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
-	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
-	       ddr->capture_data_hi, ddr->capture_data_lo);
-	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
-	       ddr->capture_ecc & CAPTURE_ECC_ECE);
-
-	printf("Memory Error Attributes Capture:\n");
-	printf(" Data Beat Number: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
-	       ECC_CAPT_ATTR_BNUM_SHIFT);
-	printf("  Transaction Size: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
-	       ECC_CAPT_ATTR_TSIZ_SHIFT);
-	printf("  Transaction Source: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
-	       ECC_CAPT_ATTR_TSRC_SHIFT);
-	printf("  Transaction Type: %d\n",
-	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
-	       ECC_CAPT_ATTR_TTYP_SHIFT);
-	printf("  Error Information Valid: %d\n\n",
-	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	volatile immap_t *immap = (immap_t *) CFG_IMMR;
-	volatile ddr83xx_t *ddr = &immap->ddr;
-	volatile u32 val;
-	u64 *addr;
-	u32 count;
-	register u64 *i;
-	u32 ret[2];
-	u32 pattern[2];
-	u32 writeback[2];
-
-	/* The pattern is written into memory to generate error */
-	pattern[0] = 0xfedcba98UL;
-	pattern[1] = 0x76543210UL;
-
-	/* After injecting error, re-initialize the memory with the value */
-	writeback[0] = 0x01234567UL;
-	writeback[1] = 0x89abcdefUL;
-
-	if (argc > 4) {
-		printf("Usage:\n%s\n", cmdtp->usage);
-		return 1;
-	}
-
-	if (argc == 2) {
-		if (strcmp(argv[1], "status") == 0) {
-			ecc_print_status();
-			return 0;
-		} else if (strcmp(argv[1], "captureclear") == 0) {
-			ddr->capture_address = 0;
-			ddr->capture_data_hi = 0;
-			ddr->capture_data_lo = 0;
-			ddr->capture_ecc = 0;
-			ddr->capture_attributes = 0;
-			return 0;
-		}
-	}
-	if (argc == 3) {
-		if (strcmp(argv[1], "sbecnt") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "sbethr") == 0) {
-			val = simple_strtoul(argv[2], NULL, 10);
-			if (val > 255) {
-				printf("Incorrect Counter value, "
-				       "should be 0..255\n");
-				return 1;
-			}
-
-			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
-			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
-			ddr->err_sbe = val;
-			return 0;
-		} else if (strcmp(argv[1], "errdisable") == 0) {
-			val = ddr->err_disable;
-
-			if (strcmp(argv[2], "+sbe") == 0) {
-				val |= ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "+mbe") == 0) {
-				val |= ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "+mse") == 0) {
-				val |= ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "+all") == 0) {
-				val |= (ECC_ERROR_DISABLE_SBED |
-					ECC_ERROR_DISABLE_MBED |
-					ECC_ERROR_DISABLE_MSED);
-			} else if (strcmp(argv[2], "-sbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_SBED;
-			} else if (strcmp(argv[2], "-mbe") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MBED;
-			} else if (strcmp(argv[2], "-mse") == 0) {
-				val &= ~ECC_ERROR_DISABLE_MSED;
-			} else if (strcmp(argv[2], "-all") == 0) {
-				val &= ~(ECC_ERROR_DISABLE_SBED |
-					 ECC_ERROR_DISABLE_MBED |
-					 ECC_ERROR_DISABLE_MSED);
-			} else {
-				printf("Incorrect err_disable field\n");
-				return 1;
-			}
-
-			ddr->err_disable = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "errdetectclr") == 0) {
-			val = ddr->err_detect;
-
-			if (strcmp(argv[2], "mme") == 0) {
-				val |= ECC_ERROR_DETECT_MME;
-			} else if (strcmp(argv[2], "sbe") == 0) {
-				val |= ECC_ERROR_DETECT_SBE;
-			} else if (strcmp(argv[2], "mbe") == 0) {
-				val |= ECC_ERROR_DETECT_MBE;
-			} else if (strcmp(argv[2], "mse") == 0) {
-				val |= ECC_ERROR_DETECT_MSE;
-			} else if (strcmp(argv[2], "all") == 0) {
-				val |= (ECC_ERROR_DETECT_MME |
-					ECC_ERROR_DETECT_MBE |
-					ECC_ERROR_DETECT_SBE |
-					ECC_ERROR_DETECT_MSE);
-			} else {
-				printf("Incorrect err_detect field\n");
-				return 1;
-			}
-
-			ddr->err_detect = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatahi") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_hi = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectdatalo") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-
-			ddr->data_err_inject_lo = val;
-			return 0;
-		} else if (strcmp(argv[1], "injectecc") == 0) {
-			val = simple_strtoul(argv[2], NULL, 16);
-			if (val > 0xff) {
-				printf("Incorrect ECC inject mask, "
-				       "should be 0x00..0xff\n");
-				return 1;
-			}
-			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		} else if (strcmp(argv[1], "inject") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EIEN;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EIEN;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
-			return 0;
-		} else if (strcmp(argv[1], "mirror") == 0) {
-			val = ddr->ecc_err_inject;
-
-			if (strcmp(argv[2], "en") == 0)
-				val |= ECC_ERR_INJECT_EMB;
-			else if (strcmp(argv[2], "dis") == 0)
-				val &= ~ECC_ERR_INJECT_EMB;
-			else
-				printf("Incorrect command\n");
-
-			ddr->ecc_err_inject = val;
-			return 0;
-		}
-	}
-	if (argc == 4) {
-		if (strcmp(argv[1], "testdw") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				ppcDWstore((u32 *) i, pattern);
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* read data, this generates ECC error */
-				ppcDWload((u32 *) i, ret);
-				__asm__ __volatile__("sync");
-
-				/* re-initialize memory, double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-		if (strcmp(argv[1], "testword") == 0) {
-			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
-			count = simple_strtoul(argv[3], NULL, 16);
-
-			if ((u32) addr % 8) {
-				printf("Address not alligned on "
-				       "double word boundary\n");
-				return 1;
-			}
-			disable_interrupts();
-
-			for (i = addr; i < addr + count; i++) {
-
-				/* enable injects */
-				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* write memory location injecting errors */
-				*(u32 *) i = 0xfedcba98UL;
-				__asm__ __volatile__("sync");
-
-				/* sub double word write,
-				 * bus will read-modify-write,
-				 * generates ECC error */
-				*((u32 *) i + 1) = 0x76543210UL;
-				__asm__ __volatile__("sync");
-
-				/* disable injects */
-				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
-
-				/* re-initialize memory,
-				 * double word write the location again,
-				 * generates new ECC code this time */
-				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
-			}
-			enable_interrupts();
-			return 0;
-		}
-	}
-	printf("Usage:\n%s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
-	   "ecc     - support for DDR ECC features\n",
-	   "status              - print out status info\n"
-	   "ecc captureclear        - clear capture regs data\n"
-	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
-	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
-	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
-	   "  [-|+]sbe - Single-Bit Error\n"
-	   "  [-|+]mbe - Multiple-Bit Error\n"
-	   "  [-|+]mse - Memory Select Error\n"
-	   "  [-|+]all - all errors\n"
-	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
-	   "  mme - Multiple Memory Errors\n"
-	   "  sbe - Single-Bit Error\n"
-	   "  mbe - Multiple-Bit Error\n"
-	   "  mse - Memory Select Error\n"
-	   "  all - all errors\n"
-	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
-	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
-	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
-	   "ecc inject <en|dis>    - enable/disable error injection\n"
-	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
-	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with double word access\n"
-	   "  - disables injects\n"
-	   "  - reads pattern back with double word access, generates error\n"
-	   "  - re-inits memory\n"
-	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
-	   "  - enables injects\n"
-	   "  - writes pattern injecting errors with word access\n"
-	   "  - writes pattern with word access, generates error\n"
-	   "  - disables injects\n" "  - re-inits memory");
-#endif				/* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
 #if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
      && defined(CONFIG_OF_BOARD_SETUP)
 
@@ -681,11 +304,11 @@ ft_board_setup(void *blob, bd_t *bd)
 	int nodeoffset;
 	int tmp[2];
 
-	nodeoffset = fdt_path_offset (fdt, "/memory");
+	nodeoffset = fdt_find_node_by_path(blob, "/memory");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(bd->bi_memstart);
 		tmp[1] = cpu_to_be32(bd->bi_memsize);
-		fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
+		fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
 	}
 #else
 	u32 *p;

board/mpc8360emds/pci.c

@@ -20,8 +20,7 @@
 #include <i2c.h>
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <libfdt_env.h>
 #endif
@@ -207,7 +206,7 @@ void pci_init_board(void)
 
 	/* Switch temporarily to I2C bus #2 */
 	orig_i2c_bus = i2c_get_bus_num();
- 	i2c_set_bus_num(1);
+	i2c_set_bus_num(1);
 
 	val8 = 0;
 	i2c_write(0x23, 0x6, 1, &val8, 1);
@@ -311,26 +310,25 @@ ft_pci_setup(void *blob, bd_t *bd)
 	int err;
 	int tmp[2];
 
-	nodeoffset = fdt_path_offset (fdt, "/" OF_SOC "/pci@8500");
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
 	if (nodeoffset >= 0) {
 		tmp[0] = cpu_to_be32(hose[0].first_busno);
 		tmp[1] = cpu_to_be32(hose[0].last_busno);
-		err = fdt_setprop(fdt, nodeoffset, "bus-range", tmp, sizeof(tmp));
+		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
 	}
 }
-#endif				/* CONFIG_OF_LIBFDT */
-#ifdef CONFIG_OF_FLAT_TREE
+#elif defined(CONFIG_OF_FLAT_TREE)
 void
 ft_pci_setup(void *blob, bd_t *bd)
 {
-       	u32 *p;
-       	int len;
+	u32 *p;
+	int len;
 
-       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
-       	if (p != NULL) {
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+	if (p != NULL) {
 		p[0] = hose[0].first_busno;
 		p[1] = hose[0].last_busno;
-       	}
+	}
 }
 #endif				/* CONFIG_OF_FLAT_TREE */
 #endif				/* CONFIG_PCI */

cpu/mpc83xx/Makefile

@@ -29,7 +29,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  spd_sdram.o qe_io.o pci.o
+	  spd_sdram.o ecc.o qe_io.o pci.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

cpu/mpc83xx/cpu.c

@@ -33,8 +33,7 @@
 #include <asm/processor.h>
 #if defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #include <libfdt_env.h>
 #endif
@@ -113,12 +112,14 @@ int checkcpu(void)
 	case SPR_8360E_REV11:
 	case SPR_8360E_REV12:
 	case SPR_8360E_REV20:
+	case SPR_8360E_REV21:
 		puts("MPC8360E, ");
 		break;
 	case SPR_8360_REV10:
 	case SPR_8360_REV11:
 	case SPR_8360_REV12:
 	case SPR_8360_REV20:
+	case SPR_8360_REV21:
 		puts("MPC8360, ");
 		break;
 	case SPR_8323E_REV10:
@@ -150,7 +151,8 @@ int checkcpu(void)
 		puts("MPC8313E, ");
 		break;
 	default:
-		puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n");
+		printf("Rev: Unknown revision number:%08x\n"
+			"Warning: Unsupported cpu revision!\n",spridr);
 		return 0;
 	}
 
@@ -329,154 +331,167 @@ void watchdog_reset (void)
 /*
  * "Setter" functions used to add/modify FDT entries.
  */
-static int fdt_set_eth0(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	/*
 	 * Fix it up if it exists, don't create it if it doesn't exist.
 	 */
-	if (fdt_get_property(fdt, nodeoffset, name, 0)) {
-		return fdt_setprop(fdt, nodeoffset, name, bd->bi_enetaddr, 6);
+	if (fdt_get_property(blob, nodeoffset, name, 0)) {
+		return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6);
 	}
-	return -FDT_ERR_NOTFOUND;
+	return 0;
 }
 #ifdef CONFIG_HAS_ETH1
 /* second onboard ethernet port */
-static int fdt_set_eth1(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	/*
 	 * Fix it up if it exists, don't create it if it doesn't exist.
 	 */
-	if (fdt_get_property(fdt, nodeoffset, name, 0)) {
-		return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet1addr, 6);
+	if (fdt_get_property(blob, nodeoffset, name, 0)) {
+		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6);
 	}
-	return -FDT_ERR_NOTFOUND;
+	return 0;
 }
 #endif
 #ifdef CONFIG_HAS_ETH2
 /* third onboard ethernet port */
-static int fdt_set_eth2(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	/*
 	 * Fix it up if it exists, don't create it if it doesn't exist.
 	 */
-	if (fdt_get_property(fdt, nodeoffset, name, 0)) {
-		return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet2addr, 6);
+	if (fdt_get_property(blob, nodeoffset, name, 0)) {
+		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6);
 	}
-	return -FDT_ERR_NOTFOUND;
+	return 0;
 }
 #endif
 #ifdef CONFIG_HAS_ETH3
 /* fourth onboard ethernet port */
-static int fdt_set_eth3(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	/*
 	 * Fix it up if it exists, don't create it if it doesn't exist.
 	 */
-	if (fdt_get_property(fdt, nodeoffset, name, 0)) {
-		return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet3addr, 6);
+	if (fdt_get_property(blob, nodeoffset, name, 0)) {
+		return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6);
 	}
-	return -FDT_ERR_NOTFOUND;
+	return 0;
 }
 #endif
 
-static int fdt_set_busfreq(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
 {
 	u32  tmp;
 	/*
 	 * Create or update the property.
 	 */
 	tmp = cpu_to_be32(bd->bi_busfreq);
-	return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
+{
+	u32  tmp;
+	/*
+	 * Create or update the property.
+	 */
+	tmp = cpu_to_be32(OF_TBCLK);
+	return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
 }
 
+
 /*
- * Fixups to the fdt.  If "create" is TRUE, the node is created
- * unconditionally.  If "create" is FALSE, the node is updated
- * only if it already exists.
+ * Fixups to the fdt.
  */
 static const struct {
 	char *node;
 	char *prop;
-	int (*set_fn)(void *fdt, int nodeoffset, const char *name, bd_t *bd);
+	int (*set_fn)(void *blob, int nodeoffset, const char *name, bd_t *bd);
 } fixup_props[] = {
 	{	"/cpus/" OF_CPU,
-		 "bus-frequency",
-		fdt_set_busfreq
+		"timebase-frequency",
+		fdt_set_tbfreq
 	},
-	{	"/cpus/" OF_SOC,
+	{	"/cpus/" OF_CPU,
 		"bus-frequency",
 		fdt_set_busfreq
 	},
-	{	"/" OF_SOC "/serial@4500/",
+	{	"/cpus/" OF_CPU,
+		"clock-frequency",
+		fdt_set_busfreq
+	},
+	{	"/" OF_SOC "/serial@4500",
 		"clock-frequency",
 		fdt_set_busfreq
 	},
-	{	"/" OF_SOC "/serial@4600/",
+	{	"/" OF_SOC "/serial@4600",
 		"clock-frequency",
 		fdt_set_busfreq
 	},
 #ifdef CONFIG_TSEC1
-	{	"/" OF_SOC "/ethernet@24000,
+	{	"/" OF_SOC "/ethernet@24000",
 		"mac-address",
 		fdt_set_eth0
 	},
-	{	"/" OF_SOC "/ethernet@24000,
+	{	"/" OF_SOC "/ethernet@24000",
 		"local-mac-address",
 		fdt_set_eth0
 	},
 #endif
 #ifdef CONFIG_TSEC2
-	{	"/" OF_SOC "/ethernet@25000,
+	{	"/" OF_SOC "/ethernet@25000",
 		"mac-address",
 		fdt_set_eth1
 	},
-	{	"/" OF_SOC "/ethernet@25000,
+	{	"/" OF_SOC "/ethernet@25000",
 		"local-mac-address",
 		fdt_set_eth1
 	},
 #endif
 #ifdef CONFIG_UEC_ETH1
 #if CFG_UEC1_UCC_NUM == 0  /* UCC1 */
-	{	"/" OF_QE "/ucc@2000/mac-address",
+	{	"/" OF_QE "/ucc@2000",
 		"mac-address",
 		fdt_set_eth0
 	},
-	{	"/" OF_QE "/ucc@2000/mac-address",
+	{	"/" OF_QE "/ucc@2000",
 		"local-mac-address",
 		fdt_set_eth0
 	},
 #elif CFG_UEC1_UCC_NUM == 2  /* UCC3 */
-	{	"/" OF_QE "/ucc@2200/mac-address",
+	{	"/" OF_QE "/ucc@2200",
 		"mac-address",
 		fdt_set_eth0
 	},
-	{	"/" OF_QE "/ucc@2200/mac-address",
+	{	"/" OF_QE "/ucc@2200",
 		"local-mac-address",
 		fdt_set_eth0
 	},
 #endif
-#endif
+#endif /* CONFIG_UEC_ETH1 */
 #ifdef CONFIG_UEC_ETH2
 #if CFG_UEC2_UCC_NUM == 1  /* UCC2 */
-	{	"/" OF_QE "/ucc@3000/mac-address",
+	{	"/" OF_QE "/ucc@3000",
 		"mac-address",
 		fdt_set_eth1
 	},
-	{	"/" OF_QE "/ucc@3000/mac-address",
+	{	"/" OF_QE "/ucc@3000",
 		"local-mac-address",
 		fdt_set_eth1
 	},
 #elif CFG_UEC1_UCC_NUM == 3  /* UCC4 */
-	{	"/" OF_QE "/ucc@3200/mac-address",
+	{	"/" OF_QE "/ucc@3200",
 		"mac-address",
 		fdt_set_eth1
 	},
-	{	"/" OF_QE "/ucc@3200/mac-address",
+	{	"/" OF_QE "/ucc@3200",
 		"local-mac-address",
 		fdt_set_eth1
 	},
 #endif
-#endif
+#endif /* CONFIG_UEC_ETH2 */
 };
 
 void
@@ -487,20 +502,23 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	int  j;
 
 	for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
-		nodeoffset = fdt_path_offset(fdt, fixup_props[j].node);
+		nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node);
 		if (nodeoffset >= 0) {
-			err = (*fixup_props[j].set_fn)(blob, nodeoffset, fixup_props[j].prop, bd);
+			err = fixup_props[j].set_fn(blob, nodeoffset,
+						    fixup_props[j].prop, bd);
 			if (err < 0)
-				printf("set_fn/libfdt: %s %s returned %s\n",
+				debug("Problem setting %s = %s: %s\n",
 					fixup_props[j].node,
 					fixup_props[j].prop,
 					fdt_strerror(err));
+		} else {
+			debug("Couldn't find %s: %s\n",
+				fixup_props[j].node,
+				fdt_strerror(nodeoffset));
 		}
 	}
 }
-#endif
-
-#if defined(CONFIG_OF_FLAT_TREE)
+#elif defined(CONFIG_OF_FLAT_TREE)
 void
 ft_cpu_setup(void *blob, bd_t *bd)
 {

cpu/mpc83xx/cpu_init.c

@@ -83,20 +83,30 @@ void cpu_init_f (volatile immap_t * im)
 	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
 #endif
 
-#ifdef CONFIG_MPC834X
 #ifdef CFG_SCCR_TSEC1CM
 	/* TSEC1 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
 #endif
+
 #ifdef CFG_SCCR_TSEC2CM
 	/* TSEC2 & I2C1 clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
 #endif
+
+#ifdef CFG_SCCR_TSEC1ON
+	/* TSEC1 clock switch */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC2ON
+	/* TSEC2 clock switch */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#endif
+
 #ifdef CFG_SCCR_USBMPHCM
 	/* USB MPH clock mode */
 	im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
 #endif
-#endif /* CONFIG_MPC834X */
 
 #ifdef CFG_SCCR_PCICM
 	/* PCI & DMA clock mode */
@@ -247,3 +257,39 @@ int cpu_init_r (void)
 #endif
 	return 0;
 }
+
+/*
+ * Figure out the cause of the reset
+ */
+int prt_83xx_rsr(void)
+{
+	static struct {
+		ulong mask;
+		char *desc;
+	} bits[] = {
+		{
+		RSR_SWSR, "Software Soft"}, {
+		RSR_SWHR, "Software Hard"}, {
+		RSR_JSRS, "JTAG Soft"}, {
+		RSR_CSHR, "Check Stop"}, {
+		RSR_SWRS, "Software Watchdog"}, {
+		RSR_BMRS, "Bus Monitor"}, {
+		RSR_SRS,  "External/Internal Soft"}, {
+		RSR_HRS,  "External/Internal Hard"}
+	};
+	static int n = sizeof bits / sizeof bits[0];
+	ulong rsr = gd->reset_status;
+	int i;
+	char *sep;
+
+	puts("Reset Status:");
+
+	sep = " ";
+	for (i = 0; i < n; i++)
+		if (rsr & bits[i].mask) {
+			printf("%s%s", sep, bits[i].desc);
+			sep = ", ";
+		}
+	puts("\n\n");
+	return 0;
+}

cpu/mpc83xx/ecc.c

@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on the contribution of Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <command.h>
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+void ecc_print_status(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+
+	printf("\nECC mode: %s\n\n",
+	       (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+	/* Interrupts */
+	printf("Memory Error Interrupt Enable:\n");
+	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+	printf("  Single-Bit Error Interrupt Enable: %d\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+	printf("  Memory Select Error Interrupt Enable: %d\n\n",
+	       (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+	/* Error disable */
+	printf("Memory Error Disable:\n");
+	printf("  Multiple-Bit Error Disable: %d\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+	printf("  Sinle-Bit Error Disable: %d\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+	printf("  Memory Select Error Disable: %d\n\n",
+	       (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+	/* Error injection */
+	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+	       ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+	printf("Memory Data Path Error Injection Mask ECC:\n");
+	printf("  ECC Mirror Byte: %d\n",
+	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+	printf("  ECC Injection Enable: %d\n",
+	       (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+	printf("  ECC Error Injection Mask: 0x%02x\n\n",
+	       ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+	/* SBE counter/threshold */
+	printf("Memory Single-Bit Error Management (0..255):\n");
+	printf("  Single-Bit Error Threshold: %d\n",
+	       (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+	printf("  Single-Bit Error Counter: %d\n\n",
+	       (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+	/* Error detect */
+	printf("Memory Error Detect:\n");
+	printf("  Multiple Memory Errors: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+	printf("  Multiple-Bit Error: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+	printf("  Single-Bit Error: %d\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+	printf("  Memory Select Error: %d\n\n",
+	       (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+	/* Capture data */
+	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+	       ddr->capture_data_hi, ddr->capture_data_lo);
+	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+	       ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+	printf("Memory Error Attributes Capture:\n");
+	printf(" Data Beat Number: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+	       ECC_CAPT_ATTR_BNUM_SHIFT);
+	printf("  Transaction Size: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+	       ECC_CAPT_ATTR_TSIZ_SHIFT);
+	printf("  Transaction Source: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+	       ECC_CAPT_ATTR_TSRC_SHIFT);
+	printf("  Transaction Type: %d\n",
+	       (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+	       ECC_CAPT_ATTR_TTYP_SHIFT);
+	printf("  Error Information Valid: %d\n\n",
+	       ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile ddr83xx_t *ddr = &immap->ddr;
+	volatile u32 val;
+	u64 *addr;
+	u32 count;
+	register u64 *i;
+	u32 ret[2];
+	u32 pattern[2];
+	u32 writeback[2];
+
+	/* The pattern is written into memory to generate error */
+	pattern[0] = 0xfedcba98UL;
+	pattern[1] = 0x76543210UL;
+
+	/* After injecting error, re-initialize the memory with the value */
+	writeback[0] = 0x01234567UL;
+	writeback[1] = 0x89abcdefUL;
+
+	if (argc > 4) {
+		printf("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (argc == 2) {
+		if (strcmp(argv[1], "status") == 0) {
+			ecc_print_status();
+			return 0;
+		} else if (strcmp(argv[1], "captureclear") == 0) {
+			ddr->capture_address = 0;
+			ddr->capture_data_hi = 0;
+			ddr->capture_data_lo = 0;
+			ddr->capture_ecc = 0;
+			ddr->capture_attributes = 0;
+			return 0;
+		}
+	}
+	if (argc == 3) {
+		if (strcmp(argv[1], "sbecnt") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, "
+				       "should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "sbethr") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, "
+				       "should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "errdisable") == 0) {
+			val = ddr->err_disable;
+
+			if (strcmp(argv[2], "+sbe") == 0) {
+				val |= ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "+mbe") == 0) {
+				val |= ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "+mse") == 0) {
+				val |= ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "+all") == 0) {
+				val |= (ECC_ERROR_DISABLE_SBED |
+					ECC_ERROR_DISABLE_MBED |
+					ECC_ERROR_DISABLE_MSED);
+			} else if (strcmp(argv[2], "-sbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "-mbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "-mse") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "-all") == 0) {
+				val &= ~(ECC_ERROR_DISABLE_SBED |
+					 ECC_ERROR_DISABLE_MBED |
+					 ECC_ERROR_DISABLE_MSED);
+			} else {
+				printf("Incorrect err_disable field\n");
+				return 1;
+			}
+
+			ddr->err_disable = val;
+			__asm__ __volatile__("sync");
+			__asm__ __volatile__("isync");
+			return 0;
+		} else if (strcmp(argv[1], "errdetectclr") == 0) {
+			val = ddr->err_detect;
+
+			if (strcmp(argv[2], "mme") == 0) {
+				val |= ECC_ERROR_DETECT_MME;
+			} else if (strcmp(argv[2], "sbe") == 0) {
+				val |= ECC_ERROR_DETECT_SBE;
+			} else if (strcmp(argv[2], "mbe") == 0) {
+				val |= ECC_ERROR_DETECT_MBE;
+			} else if (strcmp(argv[2], "mse") == 0) {
+				val |= ECC_ERROR_DETECT_MSE;
+			} else if (strcmp(argv[2], "all") == 0) {
+				val |= (ECC_ERROR_DETECT_MME |
+					ECC_ERROR_DETECT_MBE |
+					ECC_ERROR_DETECT_SBE |
+					ECC_ERROR_DETECT_MSE);
+			} else {
+				printf("Incorrect err_detect field\n");
+				return 1;
+			}
+
+			ddr->err_detect = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatahi") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_hi = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatalo") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_lo = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectecc") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+			if (val > 0xff) {
+				printf("Incorrect ECC inject mask, "
+				       "should be 0x00..0xff\n");
+				return 1;
+			}
+			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		} else if (strcmp(argv[1], "inject") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EIEN;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EIEN;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			__asm__ __volatile__("sync");
+			__asm__ __volatile__("isync");
+			return 0;
+		} else if (strcmp(argv[1], "mirror") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EMB;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EMB;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		}
+	}
+	if (argc == 4) {
+		if (strcmp(argv[1], "testdw") == 0) {
+			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+			count = simple_strtoul(argv[3], NULL, 16);
+
+			if ((u32) addr % 8) {
+				printf("Address not alligned on "
+				       "double word boundary\n");
+				return 1;
+			}
+			disable_interrupts();
+
+			for (i = addr; i < addr + count; i++) {
+
+				/* enable injects */
+				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* write memory location injecting errors */
+				ppcDWstore((u32 *) i, pattern);
+				__asm__ __volatile__("sync");
+
+				/* disable injects */
+				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* read data, this generates ECC error */
+				ppcDWload((u32 *) i, ret);
+				__asm__ __volatile__("sync");
+
+				/* re-initialize memory, double word write the location again,
+				 * generates new ECC code this time */
+				ppcDWstore((u32 *) i, writeback);
+				__asm__ __volatile__("sync");
+			}
+			enable_interrupts();
+			return 0;
+		}
+		if (strcmp(argv[1], "testword") == 0) {
+			addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+			count = simple_strtoul(argv[3], NULL, 16);
+
+			if ((u32) addr % 8) {
+				printf("Address not alligned on "
+				       "double word boundary\n");
+				return 1;
+			}
+			disable_interrupts();
+
+			for (i = addr; i < addr + count; i++) {
+
+				/* enable injects */
+				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* write memory location injecting errors */
+				*(u32 *) i = 0xfedcba98UL;
+				__asm__ __volatile__("sync");
+
+				/* sub double word write,
+				 * bus will read-modify-write,
+				 * generates ECC error */
+				*((u32 *) i + 1) = 0x76543210UL;
+				__asm__ __volatile__("sync");
+
+				/* disable injects */
+				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__("sync");
+				__asm__ __volatile__("isync");
+
+				/* re-initialize memory,
+				 * double word write the location again,
+				 * generates new ECC code this time */
+				ppcDWstore((u32 *) i, writeback);
+				__asm__ __volatile__("sync");
+			}
+			enable_interrupts();
+			return 0;
+		}
+	}
+	printf("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+	   "ecc     - support for DDR ECC features\n",
+	   "status              - print out status info\n"
+	   "ecc captureclear        - clear capture regs data\n"
+	   "ecc sbecnt <val>        - set Single-Bit Error counter\n"
+	   "ecc sbethr <val>        - set Single-Bit Threshold\n"
+	   "ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
+	   "  [-|+]sbe - Single-Bit Error\n"
+	   "  [-|+]mbe - Multiple-Bit Error\n"
+	   "  [-|+]mse - Memory Select Error\n"
+	   "  [-|+]all - all errors\n"
+	   "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+	   "  mme - Multiple Memory Errors\n"
+	   "  sbe - Single-Bit Error\n"
+	   "  mbe - Multiple-Bit Error\n"
+	   "  mse - Memory Select Error\n"
+	   "  all - all errors\n"
+	   "ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
+	   "ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
+	   "ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
+	   "ecc inject <en|dis>    - enable/disable error injection\n"
+	   "ecc mirror <en|dis>    - enable/disable mirror byte\n"
+	   "ecc testdw <addr> <cnt>  - test mem region with double word access:\n"
+	   "  - enables injects\n"
+	   "  - writes pattern injecting errors with double word access\n"
+	   "  - disables injects\n"
+	   "  - reads pattern back with double word access, generates error\n"
+	   "  - re-inits memory\n"
+	   "ecc testword <addr> <cnt>  - test mem region with word access:\n"
+	   "  - enables injects\n"
+	   "  - writes pattern injecting errors with word access\n"
+	   "  - writes pattern with word access, generates error\n"
+	   "  - disables injects\n" "  - re-inits memory");
+#endif

cpu/mpc83xx/pci.c

@@ -25,7 +25,14 @@
 
 #include <common.h>
 #include <pci.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#elif defined(CONFIG_OF_FLAT_TREE)
 #include <ft_build.h>
+#endif
+
 #include <asm/mpc8349_pci.h>
 
 #ifdef CONFIG_83XX_GENERIC_PCI
@@ -163,7 +170,34 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
 		pci_init_bus(i, reg[i]);
 }
 
-#ifdef CONFIG_OF_FLAT_TREE
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+	int nodeoffset;
+	int err;
+	int tmp[2];
+
+	if (pci_num_buses < 1)
+		return;
+
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+	}
+
+	if (pci_num_buses < 2)
+		return;
+
+	nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+	if (nodeoffset >= 0) {
+		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+		err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+	}
+}
+#elif CONFIG_OF_FLAT_TREE
 void ft_pci_setup(void *blob, bd_t *bd)
 {
 	u32 *p;

cpu/mpc83xx/spd_sdram.c

@@ -574,7 +574,10 @@ long int spd_sdram()
 
 	/* Check DIMM data bus width */
 	if (spd.dataw_lsb == 0x20) {
-		burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+		if (spd.mem_type == SPD_MEMTYPE_DDR)
+			burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+		if (spd.mem_type == SPD_MEMTYPE_DDR2)
+			burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
 		printf("\n   DDR DIMM: data bus width is 32 bit");
 	} else {
 		burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
@@ -730,8 +733,12 @@ long int spd_sdram()
 		sdram_cfg |= 0x10000000;
 
 	/* The DIMM is 32bit width */
-	if (spd.dataw_lsb == 0x20)
-		sdram_cfg |= 0x000C0000;
+	if (spd.dataw_lsb == 0x20) {
+		if (spd.mem_type == SPD_MEMTYPE_DDR)
+			sdram_cfg |= 0x000C0000;
+		if (spd.mem_type == SPD_MEMTYPE_DDR2)
+			sdram_cfg |= 0x00080000;
+	}
 
 	ddrc_ecc_enable = 0;
 

doc/README.mpc8323erdb

@@ -0,0 +1,71 @@
+Freescale MPC8323ERDB Board
+-----------------------------------------
+
+1.	Memory Map
+	The memory map looks like this:
+
+	0x0000_0000	0x03ff_ffff	DDR		 64M
+	0x8000_0000	0x8fff_ffff	PCI MEM		 256M
+	0x9000_0000	0x9fff_ffff	PCI_MMIO	 256M
+	0xe000_0000	0xe00f_ffff	IMMR		 1M
+	0xd000_0000	0xd3ff_ffff	PCI IO		 64M
+	0xfe00_0000	0xfeff_ffff	NOR FLASH (CS0)	 16M
+
+2.	Compilation
+
+	Assuming you're using BASH (or similar) as your shell:
+
+	export CROSS_COMPILE=your-cross-compiler-prefix-
+	make distclean
+	make MPC8323ERDB_config
+	make
+
+3.	Downloading and Flashing Images
+
+3.1	Reflash U-boot Image using U-boot
+
+	N.b, have an alternate means of programming
+	the flash available if the new u-boot doesn't boot.
+
+	First try a:
+
+	tftpboot $loadaddr $uboot
+
+	to make sure that the TFTP load will succeed before
+	an erase goes ahead and wipes out your current firmware.
+	Then do a:
+
+	run tftpflash
+
+	which is a shorter version of the manual sequence:
+
+	tftp $loadaddr u-boot.bin
+	protect off fe000000 +$filesize
+	erase fe000000 +$filesize
+	cp.b $loadaddr fe000000 $filesize
+
+	To keep your old u-boot's environment variables, do a:
+
+	saveenv
+
+	prior to resetting the board.
+
+3.2	Downloading and Booting Linux Kernel
+
+	Ensure that all networking-related environment variables are set
+	properly (including ipaddr, serverip, gatewayip (if needed),
+	netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+	fdtfile, and bootfile).
+
+	Then, do one of the following, depending on whether you
+	want an NFS root or a ramdisk root:
+
+	run nfsboot
+
+	or
+
+	run ramboot
+
+4	Notes
+
+	The console baudrate for MPC8323ERDB is 115200bps.

doc/README.mpc8360emds

@@ -21,7 +21,13 @@ Freescale MPC8360EMDS Board
 	SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
 		and bits labeled 8 is set as "Off".
 
-1.1	For the MPC8360E PB PROTO Board
+1.1	There are three type boards for MPC8360E silicon up to now, They are
+
+	* MPC8360E-MDS-PB PROTO (a.k.a 8360SYS PROTOTYPE)
+	* MPC8360E-MDS-PB PILOT (a.k.a 8360SYS PILOT)
+	* MPC8360EA-MDS-PB PROTO (a.k.a 8360SYS2 PROTOTYPE)
+
+1.2	For all the MPC8360EMDS Board
 
 	First, make sure the board default setting is consistent with the
 	document shipped with your board. Then apply the following setting:
@@ -33,6 +39,21 @@ Freescale MPC8360EMDS Board
 	JP6 1-2
 	on board Oscillator: 66M
 
+1.3	Since different board/chip rev. combinations have AC timing issues,
+	u-boot forces RGMII-ID (RGMII with Internal Delay) mode on by default
+	by the patch (mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers).
+
+	When the rev2.x silicon mount on these boards, and if you are using
+	u-boot version after this patch, to make the ethernet interfaces usable,
+	and to enable RGMII-ID on your board, you have to setup the jumpers
+	correctly.
+
+	* MPC8360E-MDS-PB PROTO
+	  nothing to do
+	* MPC8360E-MDS-PB PILOT
+	  JP9 and JP8 should be ON
+	* MPC8360EA-MDS-PB PROTO
+	  JP2 and JP3 should be ON
 
 2.	Memory Map
 

doc/README.mpc8349emds.ddrecc → doc/README.mpc83xx.ddrecc

@@ -15,10 +15,10 @@ IMPORTANT NOTICE: enabling injecting multiple-bit errors is potentially
 dangerous as such errors are NOT corrected by the controller. Therefore caution
 should be taken when enabling the injection of multiple-bit errors: it is only
 safe when used on a carefully selected memory area and used under control of
-the 'ecc test' command (see example 'Injecting Multiple-Bit Errors' below). In
-particular, when you simply set the multiple-bit errors in inject mask and
-enable injection, U-Boot is very likely to hang quickly as the errors will be
-injected when it accesses its code, data etc.
+the 'ecc testdw' 'ecc testword' command (see example 'Injecting Multiple-Bit
+Errors' below). In particular, when you simply set the multiple-bit errors in
+inject mask and enable injection, U-Boot is very likely to hang quickly as the
+errors will be injected when it accesses its code, data etc.
 
 
 Use cases for DDR 'ecc' command:
@@ -40,7 +40,7 @@ Injecting Single-Bit Errors
 
 2. Run test over some memory region
 
-=> ecc test 200000 10
+=> ecc testdw 200000 10
 
 3. Check ECC status
 
@@ -61,57 +61,57 @@ Memory Error Detect:
 16 errors were generated, Single-Bit Error flag was not set as Single Bit Error
 Counter did not reach  Single-Bit Error Threshold.
 
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
 
 => md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe    ................
-00200010: cafecafe cafecafe cafecafe cafecafe    ................
-00200020: cafecafe cafecafe cafecafe cafecafe    ................
-00200030: cafecafe cafecafe cafecafe cafecafe    ................
-00200040: cafecafe cafecafe cafecafe cafecafe    ................
-00200050: cafecafe cafecafe cafecafe cafecafe    ................
-00200060: cafecafe cafecafe cafecafe cafecafe    ................
-00200070: cafecafe cafecafe cafecafe cafecafe    ................
+00200000: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
 00200080: deadbeef deadbeef deadbeef deadbeef    ................
 00200090: deadbeef deadbeef deadbeef deadbeef    ................
 
-
 Injecting Multiple-Bit Errors
 -----------------------------
 
 1. Set more than 1 bit in Data Path Error Inject Mask
 
-=> ecc injectdatahi 5
+=> ecc injectdatahi 1
+=> ecc injectdatalo 1
 
 2. Run test over some memory region
 
-=> ecc test 200000 10
+=> ecc testword 200000 1
 
 3. Check ECC status
 
 => ecc status
 ...
-Memory Data Path Error Injection Mask High/Low: 00000005 00000000
+Memory Data Path Error Injection Mask High/Low: 00000001 00000001
 ...
 Memory Error Detect:
-  Multiple Memory Errors: 1
+  Multiple Memory Errors: 0
   Multiple-Bit Error: 1
   Single-Bit Error: 0
 ...
 
-Observe that both Multiple Memory Errors and Multiple-Bit Error flags are set.
+The Multiple Memory Errors flags not set and Multiple-Bit Error flags are set.
 
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
 
 => md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe    ................
-00200010: cafecafe cafecafe cafecafe cafecafe    ................
-00200020: cafecafe cafecafe cafecafe cafecafe    ................
-00200030: cafecafe cafecafe cafecafe cafecafe    ................
-00200040: cafecafe cafecafe cafecafe cafecafe    ................
-00200050: cafecafe cafecafe cafecafe cafecafe    ................
-00200060: cafecafe cafecafe cafecafe cafecafe    ................
-00200070: cafecafe cafecafe cafecafe cafecafe    ................
+00200000: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef    .#Eg.....#Eg....
 00200080: deadbeef deadbeef deadbeef deadbeef    ................
 00200090: deadbeef deadbeef deadbeef deadbeef    ................
 
@@ -140,7 +140,7 @@ Test Single-Bit Error Counter and Threshold
 ...
 Memory Single-Bit Error Management (0..255):
   Single-Bit Error Threshold: 255
-  Single Bit Error Counter: 60
+  Single Bit Error Counter: 199
 
 Memory Error Detect:
   Multiple Memory Errors: 1

drivers/fsl_i2c.c

@@ -69,9 +69,10 @@ i2c_init(int speed, int slaveadd)
 	dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
 
 	writeb(0, &dev->cr);			/* stop I2C controller */
+	udelay(5);				/* let it shutdown in peace */
 	writeb(0x3F, &dev->fdr);		/* set bus speed */
 	writeb(0x3F, &dev->dfsrr);		/* set default filter */
-	writeb(slaveadd, &dev->adr);		/* write slave address */
+	writeb(slaveadd << 1, &dev->adr);	/* write slave address */
 	writeb(0x0, &dev->sr);			/* clear status register */
 	writeb(I2C_CR_MEN, &dev->cr);		/* start I2C controller */
 #endif	/* CFG_I2C2_OFFSET */

drivers/qe/qe.c

@@ -98,7 +98,7 @@ static void qe_sdma_init(void)
 	out_be32(&p->sdaqmr, 0);
 
 	/* Allocate 2KB temporary buffer for sdma */
-	sdma_buffer_base = qe_muram_alloc(2048, 64);
+	sdma_buffer_base = qe_muram_alloc(2048, 4096);
 	out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
 
 	/* Clear sdma status */

drivers/qe/qe.h

@@ -29,7 +29,7 @@
 #define QE_NUM_OF_BRGS	16
 #define UCC_MAX_NUM	8
 
-#define QE_DATAONLY_BASE	(uint)(128)
+#define QE_DATAONLY_BASE	0
 #define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)
 
 /* QE threads SNUM

include/common.h

@@ -529,6 +529,8 @@ void	cpu_init_f    (void);
 int	cpu_init_r    (void);
 #if defined(CONFIG_8260)
 int	prt_8260_rsr  (void);
+#elif defined(CONFIG_MPC83XX)
+int	prt_83xx_rsr  (void);
 #endif
 
 /* $(CPU)/interrupts.c */

include/configs/MPC8323ERDB.h

@@ -0,0 +1,583 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 family */
+#define CONFIG_QE		1	/* Has QE */
+#define CONFIG_MPC83XX		1	/* MPC83xx family */
+#define CONFIG_MPC832X		1	/* MPC832x CPU specific */
+
+#define CONFIG_PCI		1
+#define CONFIG_83XX_GENERIC_PCI	1
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN	66666667	/* in Hz */
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ	CONFIG_83XX_CLKIN
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_2X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_CORE_TO_CSB_2_5X1 |\
+	HRCWL_CE_PLL_VCO_DIV_2 |\
+	HRCWL_CE_PLL_DIV_1X1 |\
+	HRCWL_CE_TO_PLL_1X3)
+
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_BIG_ENDIAN |\
+	HRCWH_LALE_NORMAL)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRL		0x00000000
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR		0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE		0x00000000	/* DDR is system memory */
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#define CFG_DDRCDR		0x73000002	/* DDR II voltage is 1.8V */
+
+#undef CONFIG_SPD_EEPROM
+#if defined(CONFIG_SPD_EEPROM)
+/* Determine DDR configuration from I2C interface
+ */
+#define SPD_EEPROM_ADDRESS	0x51	/* DDR SODIMM */
+#else
+/* Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE		64	/* MB */
+#define CFG_DDR_CS0_CONFIG	0x80840101
+#define CFG_DDR_TIMING_0	0x00220802
+#define CFG_DDR_TIMING_1	0x3935d322
+#define CFG_DDR_TIMING_2	0x0f9048ca
+#define CFG_DDR_TIMING_3	0x00000000
+#define CFG_DDR_CLK_CNTL	0x02000000
+#define CFG_DDR_MODE		0x44400232
+#define CFG_DDR_MODE2		0x8000c000
+#define CFG_DDR_INTERVAL	0x03200064
+#define CFG_DDR_CS0_BNDS	0x00000003
+#define CFG_DDR_SDRAM_CFG	0x43080000
+#define CFG_DDR_SDRAM_CFG2	0x00401000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST		/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00030000	/* memtest region */
+#define CFG_MEMTEST_END		0x03f00000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE6000000	/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000		/* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR		(LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR		0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI		/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER	/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
+#define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
+
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE |	/* Flash Base address */ \
+			(2 << BR_PS_SHIFT) |	/* 16 bit port size */ \
+			BR_V)			/* valid */
+#define CFG_OR0_PRELIM		0xfe006ff7	/* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * SDRAM on the Local Bus
+ */
+#undef CFG_LB_SDRAM		/* The board has not SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM	0x80000019	/* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM	0xf0001861	/*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *                 XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM	0xfc006901
+
+#define CFG_LBC_LSRT	0x32000000	/* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON	0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM	0xf8008000	/* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM	0x8000000f	/* windows size 64KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+#define OF_CPU			"PowerPC,8323@0"
+#define OF_SOC			"soc8323@e0000000"
+#define OF_QE			"qe@e0100000"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH		"/soc8323@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED	400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE	0x7F
+#define CFG_I2C_NOPROBES	{0x51}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET	0x3000
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374		/* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	0x90000000
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE		0xd0000000
+#define CFG_PCI1_IO_PHYS		CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE		0x04000000	/* 64M */
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID	0x1957	/* Freescale */
+
+#endif	/* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME		"Freescale GETH"
+
+#define CONFIG_UEC_ETH1		/* ETH3 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM	2	/* UCC3 */
+#define CFG_UEC1_RX_CLK		QE_CLK9
+#define CFG_UEC1_TX_CLK		QE_CLK10
+#define CFG_UEC1_ETH_TYPE	FAST_ETH
+#define CFG_UEC1_PHY_ADDR	4
+#define CFG_UEC1_INTERFACE_MODE	ENET_100_MII
+#endif
+
+#define CONFIG_UEC_ETH2		/* ETH4 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM	1	/* UCC2 */
+#define CFG_UEC2_RX_CLK		QE_CLK16
+#define CFG_UEC2_TX_CLK		QE_CLK3
+#define CFG_UEC2_ETH_TYPE	FAST_ETH
+#define CFG_UEC2_PHY_ADDR	0
+#define CFG_UEC2_INTERFACE_MODE	ENET_100_MII
+#endif
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
+#if defined(CONFIG_PCI)
+	#define CONFIG_CMD_PCI
+#endif
+#if defined(CFG_RAMBOOT)
+	#undef CONFIG_CMD_ENV
+	#undef CONFIG_CMD_LOADS
+#endif
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_LOAD_ADDR		0x2000000	/* default load address */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_CMD_KGDB)
+	#define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT		0x000000000
+#define CFG_HID0_FINAL		HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2		HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L	(CFG_IMMR | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U	(CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U	(CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L	(CFG_FLASH_BASE | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U	CFG_IBAT2U
+
+#define CFG_IBAT3L	(0)
+#define CFG_IBAT3U	(0)
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT5L	(CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT5U	(CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT6L	(CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+			BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U	(CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#else
+#define CFG_IBAT5L	(0)
+#define CFG_IBAT5U	(0)
+#define CFG_IBAT6L	(0)
+#define CFG_IBAT6U	(0)
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#endif
+
+/* Nothing in BAT7 */
+#define CFG_IBAT7L	(0)
+#define CFG_IBAT7U	(0)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ETHADDR	00:04:9f:ef:03:01
+#define CONFIG_HAS_ETH1				/* add support for "eth1addr" */
+#define CONFIG_ETH1ADDR	00:04:9f:ef:03:02
+
+#define CONFIG_IPADDR		10.0.0.2
+#define CONFIG_SERVERIP		10.0.0.1
+#define CONFIG_GATEWAYIP	10.0.0.1
+#define CONFIG_NETMASK		255.0.0.0
+#define CONFIG_NETDEV		eth1
+
+#define CONFIG_HOSTNAME		mpc8323erdb
+#define CONFIG_ROOTPATH		/nfsroot
+#define CONFIG_RAMDISKFILE	rootfs.ext2.gz.uboot
+#define CONFIG_BOOTFILE		uImage
+#define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE		mpc832x_rdb.dtb
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BAUDRATE		115200
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
+	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+	"tftpflash=tftp $loadaddr $uboot;"				\
+		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+	"fdtaddr=400000\0"						\
+	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
+	"ramdiskaddr=1000000\0"						\
+	"ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0"			\
+	"console=ttyS0\0"						\
+	"setbootargs=setenv bootargs "					\
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv rootdev /dev/nfs;"					\
+	"run setbootargs;"						\
+	"run setipargs;"						\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv rootdev /dev/ram;"					\
+	"run setbootargs;"						\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif	/* __CONFIG_H */

include/configs/TQM834x.h

@@ -28,9 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define DEBUG
-#undef DEBUG
-
 /*
  * High Level Configuration Options
  */

include/mpc83xx.h

@@ -86,6 +86,8 @@
 #define SPR_8360_REV12			0x80490012
 #define SPR_8360E_REV20			0x80480020
 #define SPR_8360_REV20			0x80490020
+#define SPR_8360E_REV21			0x80480021
+#define SPR_8360_REV21			0x80490021
 
 #define SPR_8323E_REV10			0x80620010
 #define SPR_8323_REV10			0x80630010
@@ -600,7 +602,9 @@
 #define SCCR_TSEC1CM_3			0xC0000000
 
 #define SCCR_TSEC1ON			0x20000000
+#define SCCR_TSEC1ON_SHIFT		29
 #define SCCR_TSEC2ON			0x10000000
+#define SCCR_TSEC2ON_SHIFT		28
 
 #endif
 

lib_ppc/board.c

@@ -309,7 +309,9 @@ init_fnc_t *init_sequence[] = {
 	prt_8260_rsr,
 	prt_8260_clks,
 #endif /* CONFIG_8260 */
-
+#if defined(CONFIG_MPC83XX)
+	prt_83xx_rsr,
+#endif
 	checkcpu,
 #if defined(CONFIG_MPC5xxx)
 	prt_mpc5xxx_clks,
@@ -376,7 +378,7 @@ void board_init_f (ulong bootflag)
 	/* compiler optimization barrier needed for GCC >= 3.4 */
 	__asm__ __volatile__("": : :"memory");
 
-#if !defined(CONFIG_CPM2)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX)
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 #endif