Cleanup MCC200 board configuration; omit non-existent stuff.

CHANGELOG

@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Cleanup MCC200 board configuration; omit non-existent stuff.
+
 * Add support for MPC859/866 Rev. A.0
 
 * Add command for handling DDR ECC registers on MPC8349EE MDS board.

include/configs/mcc200.h

@@ -67,13 +67,8 @@
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
 				ADD_USB_CMD	| \
 				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_EEPROM	| \
 				CFG_CMD_FAT	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
+				CFG_CMD_I2C)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -131,25 +126,11 @@
  * I2C configuration
  */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+#define CFG_I2C_MODULE		1	/* Select I2C module #1 or #2 */
 
 #define CFG_I2C_SPEED		100000 /* 100 kHz */
 #define CFG_I2C_SLAVE		0x7F
 
-/*
- * EEPROM configuration
- */
-#define CFG_I2C_EEPROM_ADDR		0x58
-#define CFG_I2C_EEPROM_ADDR_LEN		1
-#define CFG_EEPROM_PAGE_WRITE_BITS	4
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
-
-/*
- * RTC configuration
- */
-#define CONFIG_RTC_PCF8563
-#define CFG_I2C_RTC_ADDR		0x51
-
 /*
  * Flash configuration (8,16 or 32 MB)
  * TEXT base always at 0xFFF00000
@@ -231,7 +212,7 @@
  */
 /* 0x10000004 = 32MB SDRAM */
 /* 0x90000004 = 64MB SDRAM */
-#define CFG_GPS_PORT_CONFIG	0x10000004
+#define CFG_GPS_PORT_CONFIG	0x00000004
 
 /*
  * Miscellaneous configurable options