Coding style cleanup

CHANGELOG

@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Coding style cleanup
+
 * Add support for EP82xxM boards
   Patch by Aaron Sells, 20 Jun 2006
 

board/Marvell/db64360/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2001
 # Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 #

board/Marvell/db64460/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2001
 # Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 #

board/amcc/sequoia/sequoia.c

@@ -4,7 +4,7 @@
  *
  * (C) Copyright 2006
  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
+ * Alain Saurel,	    AMCC/IBM, alain.saurel@fr.ibm.com
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -123,12 +123,12 @@ int board_early_init_f(void)
 
 	/* setup NAND FLASH */
 	mfsdr(SDR0_CUST0, sdr0_cust0);
-        sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
+	sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL	|
 		SDR0_CUST0_NDFC_ENABLE		|
 		SDR0_CUST0_NDFC_BW_8_BIT	|
 		SDR0_CUST0_NDFC_ARE_MASK	|
 		(0x80000000 >> (28 + CFG_NAND_CS));
-        mtsdr(SDR0_CUST0, sdr0_cust0);
+	mtsdr(SDR0_CUST0, sdr0_cust0);
 
 	return 0;
 }
@@ -216,38 +216,38 @@ int misc_init_r(void)
 #ifdef CONFIG_440EPX
 	if (act == NULL || strcmp(act, "hostdev") == 0)	{
 		/* SDR Setting */
-        	mfsdr(SDR0_PFC1, sdr0_pfc1);
-        	mfsdr(SDR0_USB0, usb2d0cr);
-        	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-        	mfsdr(SDR0_USB2H0CR, usb2h0cr);
+		mfsdr(SDR0_PFC1, sdr0_pfc1);
+		mfsdr(SDR0_USB0, usb2d0cr);
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-        	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
 
 		/* An 8-bit/60MHz interface is the only possible alternative
 		   when connecting the Device to the PHY */
-        	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-        	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
 
-        	/* To enable the USB 2.0 Device function through the UTMI interface */
-        	usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-        	usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;		/*1*/
+		/* To enable the USB 2.0 Device function through the UTMI interface */
+		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;		/*1*/
 
-        	sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-        	sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;		/*0*/
+		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;		/*0*/
 
-        	mtsdr(SDR0_PFC1, sdr0_pfc1);
-        	mtsdr(SDR0_USB0, usb2d0cr);
-        	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
-        	mtsdr(SDR0_USB2H0CR, usb2h0cr);
+		mtsdr(SDR0_PFC1, sdr0_pfc1);
+		mtsdr(SDR0_USB0, usb2d0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
 		/*clear resets*/
 		udelay (1000);
@@ -264,11 +264,11 @@ int misc_init_r(void)
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
 		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 
 		udelay (1000);
@@ -287,33 +287,33 @@ int misc_init_r(void)
 		/*-------------------PATCH-------------------------------*/
 
 		/* SDR Setting */
-        	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mfsdr(SDR0_USB2H0CR, usb2h0cr);
 		mfsdr(SDR0_USB0, usb2d0cr);
 		mfsdr(SDR0_PFC1, sdr0_pfc1);
 
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-        	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
 		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;	/*0*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;		/*0*/
 		usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-        	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
+		usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;		/*0*/
 
 		usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-        	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
+		usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;		/*0*/
 
 		usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
-        	usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;		/*0*/
+		usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;		/*0*/
 
 		sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
-        	sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
+		sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;		/*1*/
 
-        	mtsdr(SDR0_USB2H0CR, usb2h0cr);
-        	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+		mtsdr(SDR0_USB2H0CR, usb2h0cr);
+		mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 		mtsdr(SDR0_USB0, usb2d0cr);
 		mtsdr(SDR0_PFC1, sdr0_pfc1);
 

board/amcc/yucca/yucca.c

@@ -958,7 +958,6 @@ int is_pci_host(struct pci_controller *hose)
 	return 1;
 }
 
-
 int yucca_pcie_card_present(int port)
 {
 	u16 reg;
@@ -1084,8 +1083,6 @@ void yucca_setup_pcie_fpga_endpoint(int port)
 		 (endpoint | in_be16((u16 *)FPGA_REG1C)));
 }
 
-
-
 static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
 
 void pcie_setup_hoses(void)

board/dave/B2/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2002
 # Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 # Marius Groeger <mgroeger@sysgo.de>

board/esd/cpci750/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2001
 # Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 #

board/evb64260/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2001
 # Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 #

board/ispan/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # Copyright (C) 2004 Arabella Software Ltd.
 # Yuli Barcohen <yuli@arabellasw.com>
 #

board/jse/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # Copyright 2004 Picture Elements, Inc.
 # Stephen Williams <steve@icarus.com>
 #

board/netstar/Makefile

@@ -1,4 +1,4 @@
-# 
+#
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #

board/sc520_spunk/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2002
 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #

board/tqm5200/cam5200_flash.c

@@ -46,7 +46,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
  * swapping is necessary within each 16 bit wide flash 'word'.
  *
  * This driver's task is to handle both flash devices: 32 bit TQM5200B
- * flash chip and 16 bit NIOS cpu flash chip. In the below 
+ * flash chip and 16 bit NIOS cpu flash chip. In the below
  * flash_addr_table table we use least significant address bit to mark
  * 16 bit flash bank and two sets of routines *_32 and *_16 to handle
  * specifics of both flashes.

board/tqm834x/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # Copyright 2004 Freescale Semiconductor, Inc.
 #
 # See file CREDITS for list of people who contributed to this

common/lcd.c

@@ -661,8 +661,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
 	 *  So, in case of Monochrome BMP we should align widths
 	 * on a byte boundary and convert them from Bit to Byte
 	 * units.
-	 *  Probably, PXA250 and MPC823 process 1bpp BMP images in 
-	 * their own ways, so make the converting to be MCC200 
+	 *  Probably, PXA250 and MPC823 process 1bpp BMP images in
+	 * their own ways, so make the converting to be MCC200
 	 * specific.
 	 */
 #if defined(CONFIG_MCC200)

config.mk

@@ -25,7 +25,7 @@
 
 ifneq ($(OBJTREE),$(SRCTREE))
 ifeq ($(CURDIR),$(SRCTREE))
-dir := 
+dir :=
 else
 dir := $(subst $(SRCTREE)/,,$(CURDIR))
 endif

cpu/i386/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # (C) Copyright 2002
 # Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
 #

cpu/mpc5xxx/interrupts.c

@@ -32,7 +32,7 @@
  *
  * Based on (well, mostly copied from) the code from the 2.4 kernel by
  * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- * 
+ *
  * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
  * Copyright (C) 2003 Montavista Software, Inc
  */

cpu/mpc83xx/Makefile

@@ -1,7 +1,7 @@
 #
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# 
+#
 # Copyright 2004 Freescale Semiconductor, Inc.
 #
 # See file CREDITS for list of people who contributed to this

cpu/ppc4xx/ndfc.c

@@ -65,8 +65,8 @@ static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
 
 static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 
 	if (hwctl & 0x1)
 		out8(base + NDFC_CMD, byte);
@@ -78,16 +78,16 @@ static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
 
 static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 
 	return (in8(base + NDFC_DATA));
 }
 
 static int ndfc_dev_ready(struct mtd_info *mtdinfo)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 
 	while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
 		;
@@ -110,8 +110,8 @@ static int ndfc_dev_ready(struct mtd_info *mtdinfo)
  */
 static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 	uint32_t *p = (uint32_t *) buf;
 
 	for(;len > 0; len -= 4)
@@ -120,8 +120,8 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
 
 static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 	uint32_t *p = (uint32_t *) buf;
 
 	for(; len > 0; len -= 4)
@@ -130,8 +130,8 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
 
 static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
 {
-        struct nand_chip *this = mtdinfo->priv;
-        ulong base = (ulong) this->IO_ADDR_W;
+	struct nand_chip *this = mtdinfo->priv;
+	ulong base = (ulong) this->IO_ADDR_W;
 	uint32_t *p = (uint32_t *) buf;
 
 	for(; len > 0; len -= 4)

cpu/ppc4xx/start.S

@@ -173,9 +173,9 @@
 
 /**************************************************************************/
 _start_440:
-        /*--------------------------------------------------------------------+
-        | 440EPX BUP Change - Hardware team request
-        +--------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------+
+	| 440EPX BUP Change - Hardware team request
+	+--------------------------------------------------------------------*/
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	sync
 	nop

drivers/serial.c

@@ -39,7 +39,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #if !defined(CONFIG_CONS_INDEX)
 #if defined (CONFIG_SERIAL_MULTI)
 /*   with CONFIG_SERIAL_MULTI we might have no console
- *  on these devices 
+ *  on these devices
  */
 #else
 #error	"No console index specified."
@@ -238,7 +238,7 @@ serial_putc(const char c)
 #endif
 
 #if defined(CONFIG_SERIAL_MULTI)
-static inline void 
+static inline void
 serial_putc_raw_dev(unsigned int dev_index,const char c)
 {
 	_serial_putc_raw(c,dev_index);
@@ -310,7 +310,7 @@ serial_setbrg(void)
 #if defined(CONFIG_SERIAL_MULTI)
 
 DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device eserial1_device = 
+struct serial_device eserial1_device =
 	INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1");
 DECLARE_ESERIAL_FUNCTIONS(2);
 struct serial_device eserial2_device =

drivers/sk98lin/Makefile

@@ -104,4 +104,3 @@ include $(SRCTREE)/rules.mk
 sinclude $(obj).depend
 
 #########################################################################
-

include/common.h

@@ -110,7 +110,7 @@ typedef volatile unsigned char	vu_char;
 #endif	/* DEBUG */
 
 #define BUG() do { \
-        printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
+	printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
 	panic("BUG!"); \
 } while (0)
 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)

lib_generic/Makefile

@@ -29,7 +29,7 @@ COBJS	= bzlib.o bzlib_crctable.o bzlib_decompress.o \
 	  bzlib_randtable.o bzlib_huffman.o \
 	  crc32.o ctype.o display_options.o ldiv.o \
 	  string.o vsprintf.o zlib.o
-	  
+
 SRCS 	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

nand_spl/nand_boot.c

@@ -34,7 +34,7 @@ extern int jump_to_uboot(ulong addr);
 
 static int nand_is_bad_block(struct mtd_info *mtd, int block)
 {
-        struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd->priv;
 	int page_addr = block * CFG_NAND_PAGE_COUNT;
 
 	/* Begin command latch cycle */
@@ -73,7 +73,7 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block)
 
 static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
 {
-        struct nand_chip *this = mtd->priv;
+	struct nand_chip *this = mtd->priv;
 	int page_addr = page + block * CFG_NAND_PAGE_COUNT;
 	int i;
 

tools/Makefile

@@ -108,7 +108,7 @@ endif
 include $(TOPDIR)/config.mk
 
 # now $(obj) is defined
-SRCS	:= $(addprefix $(obj),$(OBJ_LINKS:.o=.c)) $(OBJ_FILES:.o=.c) 
+SRCS	:= $(addprefix $(obj),$(OBJ_LINKS:.o=.c)) $(OBJ_FILES:.o=.c)
 BINS	:= $(addprefix $(obj),$(BIN_FILES))
 
 #

tools/gdb/Makefile

@@ -31,7 +31,7 @@ BINS	= gdbsend gdbcont
 COBJS	= gdbsend.o gdbcont.o error.o remote.o serial.o
 
 OBJS	:= $(addprefix $(obj),$(COBJS))
-SRCS	:= $(COBJS:.o=.c) 
+SRCS	:= $(COBJS:.o=.c)
 BINS	:= $(addprefix $(obj),$(BINS))
 
 #