USB: mx53loco: add end enable USB host support on port 1

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Wolfgang Grandegger <wg@denx.de>
Cc: Jason Liu <r64343@freescale.com>

board/freescale/mx53loco/mx53loco.c

@@ -78,6 +78,16 @@ static void setup_iomux_uart(void)
 				PAD_CTL_ODE_OPENDRAIN_ENABLE);
 }
 
+#ifdef CONFIG_USB_EHCI_MX5
+void board_ehci_hcd_init(int port)
+{
+	/* request VBUS power enable pin, GPIO[8}, gpio7 */
+	mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
+	gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 0);
+	gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
+}
+#endif
+
 static void setup_iomux_fec(void)
 {
 	/*FEC_MDIO*/

include/configs/mx53loco.h

@@ -72,6 +72,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX5
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MXC_USB_PORT	1
+#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS	0
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX		1