Coding Style cleanup, update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/apollon/lowlevel_init.S

@@ -31,16 +31,16 @@
 #include <asm/arch/clocks.h>
 #include "mem.h"
 
-#define APOLLON_CS0_BASE        0x00000000
+#define APOLLON_CS0_BASE	0x00000000
 
 #ifdef PRCM_CONFIG_I
-#define SDRC_ACTIM_CTRLA_0_VAL  0x7BA35907
-#define SDRC_ACTIM_CTRLB_0_VAL  0x00000013
-#define SDRC_RFR_CTRL_0_VAL     0x00044C01
+#define SDRC_ACTIM_CTRLA_0_VAL	0x7BA35907
+#define SDRC_ACTIM_CTRLB_0_VAL	0x00000013
+#define SDRC_RFR_CTRL_0_VAL	0x00044C01
 #elif defined(PRCM_CONFIG_II)
-#define SDRC_ACTIM_CTRLA_0_VAL  0x4A59B485
-#define SDRC_ACTIM_CTRLB_0_VAL  0x0000000C
-#define SDRC_RFR_CTRL_0_VAL     0x00030001
+#define SDRC_ACTIM_CTRLA_0_VAL	0x4A59B485
+#define SDRC_ACTIM_CTRLB_0_VAL	0x0000000C
+#define SDRC_RFR_CTRL_0_VAL	0x00030001
 #endif
 
 #define SDRAM_BASE_ADDRESS	0x80008000
@@ -66,100 +66,100 @@ flash_setup:
 	ldr	r1, =WD_UNLOCK2
 	str	r1, [r0, #WSPR]
 
-        /* Pin muxing for SDRC */
-        mov     r1, #0x00
-        ldr     r0, =0x480000A1         /* ball C12, mode 0 */
-        strb    r1, [r0]
-
-        ldr     r0, =0x48000032         /* ball D11, mode 0 */
-        strb    r1, [r0]
-
-        ldr     r0, =0x480000A3         /* ball B13, mode 0 */
-        strb    r1, [r0]
+	/* Pin muxing for SDRC */
+	mov	r1, #0x00
+	ldr	r0, =0x480000A1		/* ball C12, mode 0 */
+	strb	r1, [r0]
 
-        /* SDRC setting */
-        ldr     r0, =OMAP2420_SDRC_BASE
-        ldr     r1, =0x00000010
-        str     r1, [r0, #0x10]
+	ldr	r0, =0x48000032		/* ball D11, mode 0 */
+	strb	r1, [r0]
 
-        ldr     r1, =0x00000100
-        str     r1, [r0, #0x44]
+	ldr	r0, =0x480000A3		/* ball B13, mode 0 */
+	strb	r1, [r0]
 
-        /* SDRC CS0 configuration */
-        ldr     r1, =0x00d04011
-        str     r1, [r0, #0x80]
+	/* SDRC setting */
+	ldr	r0, =OMAP2420_SDRC_BASE
+	ldr	r1, =0x00000010
+	str	r1, [r0, #0x10]
 
-        ldr     r1, =SDRC_ACTIM_CTRLA_0_VAL
-        str     r1, [r0, #0x9C]
+	ldr	r1, =0x00000100
+	str	r1, [r0, #0x44]
 
-        ldr     r1, =SDRC_ACTIM_CTRLB_0_VAL
-        str     r1, [r0, #0xA0]
+	/* SDRC CS0 configuration */
+	ldr	r1, =0x00d04011
+	str	r1, [r0, #0x80]
 
-        ldr     r1, =SDRC_RFR_CTRL_0_VAL
-        str     r1, [r0, #0xA4]
+	ldr	r1, =SDRC_ACTIM_CTRLA_0_VAL
+	str	r1, [r0, #0x9C]
 
-        ldr     r1, =0x00000041
-        str     r1, [r0, #0x70]
+	ldr	r1, =SDRC_ACTIM_CTRLB_0_VAL
+	str	r1, [r0, #0xA0]
 
-        /* Manual command sequence */
-        ldr     r1, =0x00000007
-        str     r1, [r0, #0xA8]
+	ldr	r1, =SDRC_RFR_CTRL_0_VAL
+	str	r1, [r0, #0xA4]
 
-        ldr     r1, =0x00000000
-        str     r1, [r0, #0xA8]
+	ldr	r1, =0x00000041
+	str	r1, [r0, #0x70]
 
-        ldr     r1, =0x00000001
-        str     r1, [r0, #0xA8]
+	/* Manual command sequence */
+	ldr	r1, =0x00000007
+	str	r1, [r0, #0xA8]
 
-        ldr     r1, =0x00000002
-        str     r1, [r0, #0xA8]
-        str     r1, [r0, #0xA8]
+	ldr	r1, =0x00000000
+	str	r1, [r0, #0xA8]
 
-        /*
-         * CS0 SDRC Mode register
-         *   Burst length = 4 - DDR memory
-         *   Serial mode
-         *   CAS latency = 3
-         */
-        ldr     r1, =0x00000032
-        str     r1, [r0, #0x84]
+	ldr	r1, =0x00000001
+	str	r1, [r0, #0xA8]
 
-        /* Note: You MUST set EMR values */
-        /* EMR1 & EMR2 */
-        ldr     r1, =0x00000000
-        str     r1, [r0, #0x88]
-        str     r1, [r0, #0x8C]
+	ldr	r1, =0x00000002
+	str	r1, [r0, #0xA8]
+	str	r1, [r0, #0xA8]
+
+	/*
+	 * CS0 SDRC Mode register
+	 *   Burst length = 4 - DDR memory
+	 *   Serial mode
+	 *   CAS latency = 3
+	 */
+	ldr	r1, =0x00000032
+	str	r1, [r0, #0x84]
+
+	/* Note: You MUST set EMR values */
+	/* EMR1 & EMR2 */
+	ldr	r1, =0x00000000
+	str	r1, [r0, #0x88]
+	str	r1, [r0, #0x8C]
 
 #ifdef OLD_SDRC_DLLA_CTRL
-        /* SDRC_DLLA_CTRL */
-        ldr     r1, =0x00007306
-        str     r1, [r0, #0x60]
+	/* SDRC_DLLA_CTRL */
+	ldr	r1, =0x00007306
+	str	r1, [r0, #0x60]
 
-        ldr     r1, =0x00007303
-        str     r1, [r0, #0x60]
+	ldr	r1, =0x00007303
+	str	r1, [r0, #0x60]
 #else
-        /* SDRC_DLLA_CTRL */
-        ldr     r1, =0x00000506
-        str     r1, [r0, #0x60]
+	/* SDRC_DLLA_CTRL */
+	ldr	r1, =0x00000506
+	str	r1, [r0, #0x60]
 
-        ldr     r1, =0x00000503
-        str     r1, [r0, #0x60]
+	ldr	r1, =0x00000503
+	str	r1, [r0, #0x60]
 #endif
 
 #ifdef __BROKEN_FEATURE__
-        /* SDRC_DLLB_CTRL */
-        ldr     r1, =0x00000506
-        str     r1, [r0, #0x68]
+	/* SDRC_DLLB_CTRL */
+	ldr	r1, =0x00000506
+	str	r1, [r0, #0x68]
 
-        ldr     r1, =0x00000503
-        str     r1, [r0, #0x68]
+	ldr	r1, =0x00000503
+	str	r1, [r0, #0x68]
 #endif
 
-        /* little delay after init */
-        mov     r2, #0x1800
+	/* little delay after init */
+	mov	r2, #0x1800
 1:
-        subs    r2, r2, #0x1
-        bne     1b
+	subs	r2, r2, #0x1
+	bne	1b
 
 	/* Setup base address */
 	ldr	r0, =0x00000000		/* NOR address */
@@ -178,21 +178,21 @@ copy_loop:
 #endif
 
 prcm_setup:
-        ldr     r0, =OMAP2420_CM_BASE
-        ldr     r1, [r0, #0x544]        /* CLKSEL2_PLL */
-        bic     r1, r1, #0x03
-        orr     r1, r1, #0x02
-        str     r1, [r0, #0x544]
-
-        ldr     r1, [r0, #0x500]
-        bic     r1, r1, #0x03
-        orr     r1, r1, #0x01
-        str     r1, [r0, #0x500]
-
-        ldr     r1, [r0, #0x140]
-        bic     r1, r1, #0x1f
-        orr     r1, r1, #0x02
-        str     r1, [r0, #0x140]
+	ldr	r0, =OMAP2420_CM_BASE
+	ldr	r1, [r0, #0x544]	/* CLKSEL2_PLL */
+	bic	r1, r1, #0x03
+	orr	r1, r1, #0x02
+	str	r1, [r0, #0x544]
+
+	ldr	r1, [r0, #0x500]
+	bic	r1, r1, #0x03
+	orr	r1, r1, #0x01
+	str	r1, [r0, #0x500]
+
+	ldr	r1, [r0, #0x140]
+	bic	r1, r1, #0x1f
+	orr	r1, r1, #0x02
+	str	r1, [r0, #0x140]
 
 #ifdef PRCM_CONFIG_I
 	ldr	r1, =0x000003C3
@@ -204,58 +204,58 @@ prcm_setup:
 	ldr	r1, =0x00000002
 	str	r1, [r0, #0x340]
 
-        ldr     r1, =CM_CLKSEL1_CORE
+	ldr	r1, =CM_CLKSEL1_CORE
 #ifdef PRCM_CONFIG_I
-	ldr     r2, =0x08300C44
+	ldr	r2, =0x08300C44
 #else
-	ldr     r2, =0x04600C26
+	ldr	r2, =0x04600C26
 #endif
-        str     r2, [r1]
+	str	r2, [r1]
 
-        ldr     r0, =OMAP2420_CM_BASE
-        ldr     r1, [r0, #0x084]
-        and     r1, r1, #0x01
-        cmp     r1, #0x01
-        bne     clkvalid
+	ldr	r0, =OMAP2420_CM_BASE
+	ldr	r1, [r0, #0x084]
+	and	r1, r1, #0x01
+	cmp	r1, #0x01
+	bne	clkvalid
 
-        b       .
+	b	.
 
 clkvalid:
-        mov     r1, #0x01
-        str     r1, [r0, #0x080]
+	mov	r1, #0x01
+	str	r1, [r0, #0x080]
 
 waitvalid:
-        ldr     r1, [r0, #0x084]
-        and     r1, r1, #0x01
-        cmp     r1, #0x00
-        bne     waitvalid
+	ldr	r1, [r0, #0x084]
+	and	r1, r1, #0x01
+	cmp	r1, #0x00
+	bne	waitvalid
 
-        ldr     r0, =CM_CLKSEL1_PLL
+	ldr	r0, =CM_CLKSEL1_PLL
 #ifdef PRCM_CONFIG_I
-        ldr     r1, =0x01837100
+	ldr	r1, =0x01837100
 #else
-        ldr     r1, =0x01832100
+	ldr	r1, =0x01832100
 #endif
-        str     r1, [r0]
+	str	r1, [r0]
 
-        ldr     r0, =PRCM_CLKCFG_CTRL
-        mov     r1, #0x01
-        str     r1, [r0]
-        mov     r6, #0x50
+	ldr	r0, =PRCM_CLKCFG_CTRL
+	mov	r1, #0x01
+	str	r1, [r0]
+	mov	r6, #0x50
 loop1:
-        subs    r6, r6, #0x01
-        cmp     r6, #0x01
-        bne     loop1
+	subs	r6, r6, #0x01
+	cmp	r6, #0x01
+	bne	loop1
 
-        ldr     r0, =CM_CLKEN_PLL
+	ldr	r0, =CM_CLKEN_PLL
 	mov	r1, #0x0f
-        str     r1, [r0]
+	str	r1, [r0]
 
-        mov     r6, #0x100
+	mov	r6, #0x100
 loop2:
-        subs    r6, r6, #0x01
-        cmp     r6, #0x01
-        bne     loop2
+	subs	r6, r6, #0x01
+	cmp	r6, #0x01
+	bne	loop2
 
 	ldr	r0, =0x48008200
 	ldr	r1, =0xbfffffff

board/freescale/common/fsl_diu_fb.c

@@ -23,7 +23,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <i2c.h>
 #include <malloc.h>
@@ -32,14 +31,12 @@
 
 #include "fsl_diu_fb.h"
 
-
 #ifdef DEBUG
 #define DPRINTF(fmt, args...) printf("%s: " fmt,__FUNCTION__,## args)
 #else
 #define DPRINTF(fmt, args...)
 #endif
 
-
 struct fb_videomode {
 	const char *name;	/* optional */
 	unsigned int refresh;		/* optional */
@@ -182,8 +179,6 @@ struct diu_addr {
 
 #define MAX_CURS		32
 
-
-
 static struct fb_info fsl_fb_info;
 static struct diu_addr gamma, cursor;
 static struct diu_ad fsl_diu_fb_ad __attribute__ ((aligned(32)));
@@ -206,7 +201,6 @@ static int fsl_diu_disable_panel(struct fb_info *info);
 static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align);
 static u32 get_busfreq(void);
 
-
 int fsl_diu_init(int xres,
 		 unsigned int pixel_format,
 		 int gamma_fix,

include/configs/apollon.h

@@ -39,14 +39,14 @@
 
 /* Clock config to target*/
 #define PRCM_CONFIG_I		1
-//#define PRCM_CONFIG_II	1
+/* #define PRCM_CONFIG_II	1 */
 
 /* Boot method */
 /* uncomment if you use NOR boot */
-//#define CFG_NOR_BOOT		1
+/* #define CFG_NOR_BOOT		1 */
 
 /* uncomment if you use NOR on CS3 */
-//#define CFG_USE_NOR		1
+/* #define CFG_USE_NOR		1 */
 
 #ifdef CFG_NOR_BOOT
 #undef CFG_USE_NOR
@@ -111,13 +111,13 @@
 #define	CFG_I2C_SLAVE	1
 #define	CONFIG_DRIVER_OMAP24XX_I2C
 
-/* allow to overwrite serial and ethaddr */ 
+/* allow to overwrite serial and ethaddr */
 #define	CONFIG_ENV_OVERWRITE
 #define	CONFIG_CONS_INDEX	1
 #define	CONFIG_BAUDRATE		115200
 #define	CFG_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include	<config_cmd_default.h>
 
 #define	CONFIG_CMD_DHCP
@@ -180,8 +180,8 @@
 
 #define	CFG_LOAD_ADDR	(OMAP2420_SDRC_CS0)	/* default load address */
 
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) 
- * or by 32KHz clk, or from external sig. This rate is divided by a local 
+/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
+ * or by 32KHz clk, or from external sig. This rate is divided by a local
  * divisor.
  */
 #define	V_PVT	7	/* use with 12MHz/128 */
@@ -193,7 +193,7 @@
 /*-----------------------------------------------------------------------
  * Stack sizes
  *
- * The stack sizes are set up in start.S using the settings below 
+ * The stack sizes are set up in start.S using the settings below
  */
 #define	CONFIG_STACKSIZE SZ_128K	/* regular stack */
 #ifdef	CONFIG_USE_IRQ
@@ -223,7 +223,7 @@
  */
 # define	CFG_FLASH_CFI	1	/* Flash memory is CFI compliant */
 # define	CFG_FLASH_CFI_DRIVER	1	/* Use drivers/cfi_flash.c */
-//#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
+/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* Use buffered writes (~10x faster) */
 # define	CFG_FLASH_PROTECTION	1	/* Use h/w sector protection*/
 
 #else	/* !CFG_USE_NOR */