Merge with /home/wd/git/u-boot/custodian/u-boot-arm

board/at91rm9200dk/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= at91rm9200dk.o at45.o flash.o
+COBJS	:= at91rm9200dk.o flash.o led.o mux.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/at91rm9200dk/at45.c

@@ -1,621 +0,0 @@
-/* Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
-the Continuous Array Read function */
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS	(0xC << 16)
-#define DATAFLASH_TCHS	(0x1 << 24)
-
-#define AT91C_TIMEOUT_WRDY			200000
-#define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
-
-void AT91F_SpiInit(void) {
-
-/*-------------------------------------------------------------------*/
-/*	SPI DataFlash Init								*/
-/*-------------------------------------------------------------------*/
-	/* Configure PIOs */
-	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
-				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
-	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
-				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
-	/* Enable CLock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
-
-	/* Reset the SPI */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
-	/* Configure CS0 and CS3 */
-	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
-	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
-	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-}
-
-void AT91F_SpiEnable(int cs) {
-	switch(cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS);
-		break;
-	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
-		/* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
-		AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7;	/* Set in PIO mode */
-		AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7;	/* Configure in output */
-		/* Clear Output */
-		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
-		/* Configure PCS */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	}
-
-	/* SPI_Enable */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
-}
-
-/*----------------------------------------------------------------------------*/
-/* \fn    AT91F_SpiWrite						      */
-/* \brief Set the PDC registers for a transfert				      */
-/*----------------------------------------------------------------------------*/
-unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
-{
-	unsigned int timeout;
-
-	pDesc->state = BUSY;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
-	/* Initialize the Transmit and Receive Pointer */
-	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
-	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
-
-	/* Intialize the Transmit and Receive Counters */
-	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
-	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
-
-	if ( pDesc->tx_data_size != 0 ) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
-		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
-		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-	timeout = 0;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
-	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-	pDesc->state = IDLE;
-
-	if (timeout >= CFG_SPI_WRITE_TOUT){
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashSendCommand					*/
-/* \brief Generic function to send a command to the dataflash		*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char OpCode,
-	unsigned int CmdSize,
-	unsigned int DataflashAddress)
-{
-    unsigned int adr;
-
-	if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* process the address to obtain page address and byte address */
-	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size));
-
-	/* fill the  command  buffer */
-	pDataFlash->pDataFlashDesc->command[0] = OpCode;
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24);
-		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16);
-		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8);
-		pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF);
-	} else {
-		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
-		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
-		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
-		pDataFlash->pDataFlashDesc->command[4] = 0;
-	}
-	pDataFlash->pDataFlashDesc->command[5] = 0;
-	pDataFlash->pDataFlashDesc->command[6] = 0;
-	pDataFlash->pDataFlashDesc->command[7] = 0;
-
-	/* Initialize the SpiData structure for the spi write fuction */
-	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize ;
-	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize ;
-
-	/* send the command and read the data */
-	return AT91F_SpiWrite (pDataFlash->pDataFlashDesc);
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashGetStatus					*/
-/* \brief Read the status register of the dataflash			*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
-{
-	AT91S_DataFlashStatus status;
-
-	/* if a transfert is in progress ==> return 0 */
-	if( (pDesc->state) != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* first send the read status command (D7H) */
-	pDesc->command[0] = DB_STATUS;
-	pDesc->command[1] = 0;
-
-	pDesc->DataFlash_state  = GET_STATUS;
-	pDesc->tx_data_size 	= 0 ;	/* Transmit the command and receive response */
-	pDesc->tx_cmd_pt 		= pDesc->command ;
-	pDesc->rx_cmd_pt 		= pDesc->command ;
-	pDesc->rx_cmd_size 		= 2 ;
-	pDesc->tx_cmd_size 		= 2 ;
-	status = AT91F_SpiWrite (pDesc);
-
-	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
-
-	return status;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashWaitReady					*/
-/* \brief wait for dataflash ready (bit7 of the status register == 1)	*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout)
-{
-	pDataFlashDesc->DataFlash_state = IDLE;
-
-	do {
-		AT91F_DataFlashGetStatus(pDataFlashDesc);
-		timeout--;
-	} while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) );
-
-	if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
-		return DATAFLASH_ERROR;
-
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashContinuousRead 				*/
-/* Object              : Continuous stream Read 				*/
-/* Input Parameters    : DataFlash Service					*/
-/*						: <src> = dataflash address	*/
-/*                     : <*dataBuffer> = data buffer pointer			*/
-/*                     : <sizeToRead> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
-	AT91PS_DataFlash pDataFlash,
-	int src,
-	unsigned char *dataBuffer,
-	int sizeToRead )
-{
-	AT91S_DataFlashStatus status;
-	/* Test the size to read in the device */
-	if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
-		return DATAFLASH_MEMORY_OVERFLOW;
-
-	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
-	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
-	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
-	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
-
-	status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
-	/* Send the command to the dataflash */
-	return(status);
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashPagePgmBuf				*/
-/* Object              : Main memory page program through buffer 1 or buffer 2	*/
-/* Input Parameters    : DataFlash Service					*/
-/*						: <*src> = Source buffer	*/
-/*                     : <dest> = dataflash destination address			*/
-/*                     : <SizeToWrite> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	unsigned int dest,
-	unsigned int SizeToWrite)
-{
-	int cmdsize;
-	pDataFlash->pDataFlashDesc->tx_data_pt = src ;
-	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
-	pDataFlash->pDataFlashDesc->rx_data_pt = src;
-	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
-
-	cmdsize = 4;
-	/* Send the command to the dataflash */
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_MainMemoryToBufferTransfert			*/
-/* Object              : Read a page in the SRAM Buffer 1 or 2			*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned int page)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
-		return DATAFLASH_BAD_COMMAND;
-
-	/* no data to transmit or receive */
-	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size));
-}
-
-
-/*----------------------------------------------------------------------------- */
-/* Function Name       : AT91F_DataFlashWriteBuffer				*/
-/* Object              : Write data to the internal sram buffer 1 or 2		*/
-/* Input Parameters    : DataFlash Service					*/
-/*			: <BufferCommand> = command to write buffer1 or buffer2	*/
-/*                     : <*dataBuffer> = data buffer to write			*/
-/*                     : <bufferAddress> = address in the internal buffer	*/
-/*                     : <SizeToWrite> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned char *dataBuffer,
-	unsigned int bufferAddress,
-	int SizeToWrite )
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
-		return DATAFLASH_BAD_COMMAND;
-
-	/* buffer address must be lower than page size */
-	if (bufferAddress > pDataFlash->pDevice->pages_size)
-		return DATAFLASH_BAD_ADDRESS;
-
-	if ( (pDataFlash->pDataFlashDesc->state)  != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* Send first Write Command */
-	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
-	pDataFlash->pDataFlashDesc->command[1] = 0;
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-	    	pDataFlash->pDataFlashDesc->command[2] = 0;
-	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
-	    	pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
-		cmdsize = 5;
-	} else {
-	    	pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
-	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
-	    	pDataFlash->pDataFlashDesc->command[4] = 0;
-		cmdsize = 4;
-	}
-
-	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ;
-	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ;
-
-	pDataFlash->pDataFlashDesc->rx_data_pt 	= dataBuffer ;
-	pDataFlash->pDataFlashDesc->tx_data_pt 	= dataBuffer ;
-	pDataFlash->pDataFlashDesc->rx_data_size 	= SizeToWrite ;
-	pDataFlash->pDataFlashDesc->tx_data_size 	= SizeToWrite ;
-
-	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
-}
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_PageErase                                        */
-/* Object              : Erase a page 						*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_PageErase(
-	AT91PS_DataFlash pDataFlash,
-	unsigned int page)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	/* no data to transmit or receive */
-    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_BlockErase                                       */
-/* Object              : Erase a Block 						*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_BlockErase(
-	AT91PS_DataFlash pDataFlash,
-	unsigned int block)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	/* no data to transmit or receive */
-    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size));
-}
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_WriteBufferToMain				*/
-/* Object              : Write buffer to the main memory			*/
-/* Input Parameters    : DataFlash Service					*/
-/*		: <BufferCommand> = command to send to buffer1 or buffer2	*/
-/*                     : <dest> = main memory address				*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_WriteBufferToMain (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned int dest )
-{
-	int cmdsize;
-	/* Test if the buffer command is correct */
-	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
-	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
-	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
-	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
-		return DATAFLASH_BAD_COMMAND;
-
-	/* no data to transmit or receive */
-	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	/* Send the command to the dataflash */
-	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_PartialPageWrite					*/
-/* Object              : Erase partielly a page					*/
-/* Input Parameters    : <page> = page number					*/
-/*			: <AdrInpage> = adr to begin the fading			*/
-/*                     : <length> = Number of bytes to erase			*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_PartialPageWrite (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	unsigned int dest,
-	unsigned int size)
-{
-	unsigned int page;
-	unsigned int AdrInPage;
-
-	page = dest / (pDataFlash->pDevice->pages_size);
-	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
-
-	/* Read the contents of the page in the Sram Buffer */
-	AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
-	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	/*Update the SRAM buffer */
-	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
-
-	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-	/* Erase page if a 128 Mbits device */
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-		AT91F_PageErase(pDataFlash, page);
-		/* Rewrite the modified Sram Buffer in the main memory */
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	}
-
-	/* Rewrite the modified Sram Buffer in the main memory */
-	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size)));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashWrite					*/
-/* Object              :							*/
-/* Input Parameters    : <*src> = Source buffer					*/
-/*                     : <dest> = dataflash adress				*/
-/*                     : <size> = data buffer size				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWrite(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	int dest,
-	int size )
-{
-	unsigned int length;
-	unsigned int page;
-	unsigned int status;
-
-	AT91F_SpiEnable(pDataFlash->pDevice->cs);
-
-	if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
-		return DATAFLASH_MEMORY_OVERFLOW;
-
-	/* If destination does not fit a page start address */
-	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) {
-		length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
-
-		if (size < length)
-			length = size;
-
-		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		/* Update size, source and destination pointers */
-		size -= length;
-		dest += length;
-		src += length;
-	}
-
-	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
-		/* program dataflash page */
-		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
-
-		status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size);
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		status = AT91F_PageErase(pDataFlash, page);
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-		if (!status)
-			return DATAFLASH_ERROR;
-
-		status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest);
-		if(!status)
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		/* Update size, source and destination pointers */
-		size -= pDataFlash->pDevice->pages_size ;
-		dest += pDataFlash->pDevice->pages_size ;
-		src  += pDataFlash->pDevice->pages_size ;
-	}
-
-	/* If still some bytes to read */
-	if ( size > 0 ) {
-		/* program dataflash page */
-		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	}
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashRead 					*/
-/* Object              : Read a block in dataflash				*/
-/* Input Parameters    : 							*/
-/* Return value		: 							*/
-/*------------------------------------------------------------------------------*/
-int AT91F_DataFlashRead(
-	AT91PS_DataFlash pDataFlash,
-	unsigned long addr,
-	unsigned long size,
-	char *buffer)
-{
-	unsigned long SizeToRead;
-
-	AT91F_SpiEnable(pDataFlash->pDevice->cs);
-
-	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
-		return -1;
-
-	while (size) {
-		SizeToRead = (size < 0x8000)? size:0x8000;
-
-		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
-			return -1;
-
-		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, (uchar *)buffer, SizeToRead) != DATAFLASH_OK)
-			return -1;
-
-		size -= SizeToRead;
-		addr += SizeToRead;
-		buffer += SizeToRead;
-	}
-
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataflashProbe 					*/
-/* Object              : 							*/
-/* Input Parameters    : 							*/
-/* Return value	       : Dataflash status register				*/
-/*------------------------------------------------------------------------------*/
-int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
-{
-	AT91F_SpiEnable(cs);
-	AT91F_DataFlashGetStatus(pDesc);
-	return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
-}
-
-#endif

board/at91rm9200dk/led.c

@@ -0,0 +1,80 @@
+/*
+ * (C) Copyright 2006
+ * Atmel Nordic AB <www.atmel.com>
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/AT91RM9200.h>
+
+#define	GREEN_LED	AT91C_PIO_PB0
+#define	YELLOW_LED	AT91C_PIO_PB1
+#define	RED_LED	AT91C_PIO_PB2
+
+void	green_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_CODR		= GREEN_LED;
+}
+
+void	 yellow_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_CODR		= YELLOW_LED;
+}
+
+void	 red_LED_on(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_CODR		= RED_LED;
+}
+
+void	green_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_SODR		= GREEN_LED;
+}
+
+void	yellow_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_SODR		= YELLOW_LED;
+}
+
+void	red_LED_off(void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	PIOB->PIO_SODR		= RED_LED;
+}
+
+
+void LED_init (void)
+{
+	AT91PS_PIO	PIOB	= AT91C_BASE_PIOB;
+	AT91PS_PMC	PMC	= AT91C_BASE_PMC;
+	PMC->PMC_PCER		= (1 << AT91C_ID_PIOB);	/* Enable PIOB clock */
+	/* Disable peripherals on LEDs */
+	PIOB->PIO_PER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+	/* Enable pins as outputs */
+	PIOB->PIO_OER		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+	/* Turn all LEDs OFF */
+	PIOB->PIO_SODR		= AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
+}

board/at91rm9200dk/mux.c

@@ -0,0 +1,39 @@
+#include <config.h>
+#include <common.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+int AT91F_GetMuxStatus(void) {
+#ifdef	DATAFLASH_MMC_SELECT
+	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT; /* Set in PIO mode */
+	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT; /* Configure in output */
+
+
+	if(AT91C_BASE_PIOB->PIO_ODSR & DATAFLASH_MMC_SELECT) {
+		return 1;
+	} else {
+		return 0;
+	}
+#endif
+	return 0;
+}
+
+void AT91F_SelectMMC(void) {
+#ifdef	DATAFLASH_MMC_SELECT
+	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
+	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
+	/* Set Output */
+	AT91C_BASE_PIOB->PIO_SODR = DATAFLASH_MMC_SELECT; 
+#endif 
+}
+
+void AT91F_SelectSPI(void) {
+#ifdef	DATAFLASH_MMC_SELECT
+	AT91C_BASE_PIOB->PIO_PER = DATAFLASH_MMC_SELECT;	/* Set in PIO mode */
+	AT91C_BASE_PIOB->PIO_OER = DATAFLASH_MMC_SELECT;	/* Configure in output */
+	/* Clear Output */
+	AT91C_BASE_PIOB->PIO_CODR = DATAFLASH_MMC_SELECT; 
+#endif 
+}
+
+

board/cmc_pu2/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o
+COBJS	:= cmc_pu2.o flash.o load_sernum_ethaddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))

board/cmc_pu2/at45.c

@@ -1,621 +0,0 @@
-/* Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
-the Continuous Array Read function */
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS	(0xC << 16)
-#define DATAFLASH_TCHS	(0x1 << 24)
-
-#define AT91C_TIMEOUT_WRDY			200000
-#define AT91C_SPI_PCS0_SERIAL_DATAFLASH		0xE     /* Chip Select 0 : NPCS0 %1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD		0x7     /* Chip Select 3 : NPCS3 %0111 */
-
-void AT91F_SpiInit(void) {
-
-/*-------------------------------------------------------------------*/
-/*	SPI DataFlash Init								*/
-/*-------------------------------------------------------------------*/
-	/* Configure PIOs */
-	AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
-				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
-	AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
-				   AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
-	/* Enable CLock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
-
-	/* Reset the SPI */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
-	/* Configure CS0 and CS3 */
-	*(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
-	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-	*(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT &
-	DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-}
-
-void AT91F_SpiEnable(int cs) {
-	switch(cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS);
-		break;
-	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
-		/* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
-		AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7;	/* Set in PIO mode */
-		AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7;	/* Configure in output */
-		/* Clear Output */
-		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
-		/* Configure PCS */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	}
-
-	/* SPI_Enable */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
-}
-
-/*----------------------------------------------------------------------------*/
-/* \fn    AT91F_SpiWrite						      */
-/* \brief Set the PDC registers for a transfert				      */
-/*----------------------------------------------------------------------------*/
-unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
-{
-	unsigned int timeout;
-
-	pDesc->state = BUSY;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
-	/* Initialize the Transmit and Receive Pointer */
-	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
-	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
-
-	/* Intialize the Transmit and Receive Counters */
-	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
-	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
-
-	if ( pDesc->tx_data_size != 0 ) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
-		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
-		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-	timeout = 0;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
-	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-	pDesc->state = IDLE;
-
-	if (timeout >= CFG_SPI_WRITE_TOUT){
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashSendCommand					*/
-/* \brief Generic function to send a command to the dataflash		*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char OpCode,
-	unsigned int CmdSize,
-	unsigned int DataflashAddress)
-{
-    unsigned int adr;
-
-	if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* process the address to obtain page address and byte address */
-	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size));
-
-	/* fill the  command  buffer */
-	pDataFlash->pDataFlashDesc->command[0] = OpCode;
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24);
-		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16);
-		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8);
-		pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF);
-	} else {
-		pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
-		pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
-		pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
-		pDataFlash->pDataFlashDesc->command[4] = 0;
-	}
-	pDataFlash->pDataFlashDesc->command[5] = 0;
-	pDataFlash->pDataFlashDesc->command[6] = 0;
-	pDataFlash->pDataFlashDesc->command[7] = 0;
-
-	/* Initialize the SpiData structure for the spi write fuction */
-	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize ;
-	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize ;
-
-	/* send the command and read the data */
-	return AT91F_SpiWrite (pDataFlash->pDataFlashDesc);
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashGetStatus					*/
-/* \brief Read the status register of the dataflash			*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
-{
-	AT91S_DataFlashStatus status;
-
-	/* if a transfert is in progress ==> return 0 */
-	if( (pDesc->state) != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* first send the read status command (D7H) */
-	pDesc->command[0] = DB_STATUS;
-	pDesc->command[1] = 0;
-
-	pDesc->DataFlash_state  = GET_STATUS;
-	pDesc->tx_data_size 	= 0 ;	/* Transmit the command and receive response */
-	pDesc->tx_cmd_pt 		= pDesc->command ;
-	pDesc->rx_cmd_pt 		= pDesc->command ;
-	pDesc->rx_cmd_size 		= 2 ;
-	pDesc->tx_cmd_size 		= 2 ;
-	status = AT91F_SpiWrite (pDesc);
-
-	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
-
-	return status;
-}
-
-
-/*----------------------------------------------------------------------*/
-/* \fn    AT91F_DataFlashWaitReady					*/
-/* \brief wait for dataflash ready (bit7 of the status register == 1)	*/
-/*----------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout)
-{
-	pDataFlashDesc->DataFlash_state = IDLE;
-
-	do {
-		AT91F_DataFlashGetStatus(pDataFlashDesc);
-		timeout--;
-	} while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) );
-
-	if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
-		return DATAFLASH_ERROR;
-
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashContinuousRead 				*/
-/* Object              : Continuous stream Read 				*/
-/* Input Parameters    : DataFlash Service					*/
-/*						: <src> = dataflash address	*/
-/*                     : <*dataBuffer> = data buffer pointer			*/
-/*                     : <sizeToRead> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
-	AT91PS_DataFlash pDataFlash,
-	int src,
-	unsigned char *dataBuffer,
-	int sizeToRead )
-{
-	AT91S_DataFlashStatus status;
-	/* Test the size to read in the device */
-	if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
-		return DATAFLASH_MEMORY_OVERFLOW;
-
-	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
-	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
-	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
-	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
-
-	status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
-	/* Send the command to the dataflash */
-	return(status);
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashPagePgmBuf				*/
-/* Object              : Main memory page program through buffer 1 or buffer 2	*/
-/* Input Parameters    : DataFlash Service					*/
-/*						: <*src> = Source buffer	*/
-/*                     : <dest> = dataflash destination address			*/
-/*                     : <SizeToWrite> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	unsigned int dest,
-	unsigned int SizeToWrite)
-{
-	int cmdsize;
-	pDataFlash->pDataFlashDesc->tx_data_pt = src ;
-	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
-	pDataFlash->pDataFlashDesc->rx_data_pt = src;
-	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
-
-	cmdsize = 4;
-	/* Send the command to the dataflash */
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_MainMemoryToBufferTransfert			*/
-/* Object              : Read a page in the SRAM Buffer 1 or 2			*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned int page)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
-		return DATAFLASH_BAD_COMMAND;
-
-	/* no data to transmit or receive */
-	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size));
-}
-
-
-/*----------------------------------------------------------------------------- */
-/* Function Name       : AT91F_DataFlashWriteBuffer				*/
-/* Object              : Write data to the internal sram buffer 1 or 2		*/
-/* Input Parameters    : DataFlash Service					*/
-/*			: <BufferCommand> = command to write buffer1 or buffer2	*/
-/*                     : <*dataBuffer> = data buffer to write			*/
-/*                     : <bufferAddress> = address in the internal buffer	*/
-/*                     : <SizeToWrite> = data buffer size			*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned char *dataBuffer,
-	unsigned int bufferAddress,
-	int SizeToWrite )
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
-		return DATAFLASH_BAD_COMMAND;
-
-	/* buffer address must be lower than page size */
-	if (bufferAddress > pDataFlash->pDevice->pages_size)
-		return DATAFLASH_BAD_ADDRESS;
-
-	if ( (pDataFlash->pDataFlashDesc->state)  != IDLE)
-		return DATAFLASH_BUSY;
-
-	/* Send first Write Command */
-	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
-	pDataFlash->pDataFlashDesc->command[1] = 0;
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-	    	pDataFlash->pDataFlashDesc->command[2] = 0;
-	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
-	    	pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
-		cmdsize = 5;
-	} else {
-	    	pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress &  pDataFlash->pDevice->byte_mask)) >> 8) ;
-	    	pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress  & 0x00FF) ;
-	    	pDataFlash->pDataFlashDesc->command[4] = 0;
-		cmdsize = 4;
-	}
-
-	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ;
-	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = pDataFlash->pDataFlashDesc->command ;
-	pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ;
-
-	pDataFlash->pDataFlashDesc->rx_data_pt 	= dataBuffer ;
-	pDataFlash->pDataFlashDesc->tx_data_pt 	= dataBuffer ;
-	pDataFlash->pDataFlashDesc->rx_data_size 	= SizeToWrite ;
-	pDataFlash->pDataFlashDesc->tx_data_size 	= SizeToWrite ;
-
-	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
-}
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_PageErase                                        */
-/* Object              : Erase a page 						*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_PageErase(
-	AT91PS_DataFlash pDataFlash,
-	unsigned int page)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	/* no data to transmit or receive */
-    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_BlockErase                                       */
-/* Object              : Erase a Block 						*/
-/* Input Parameters    : DataFlash Service					*/
-/*                     : Page concerned						*/
-/*                     : 							*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_BlockErase(
-	AT91PS_DataFlash pDataFlash,
-	unsigned int block)
-{
-	int cmdsize;
-	/* Test if the buffer command is legal */
-	/* no data to transmit or receive */
-    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size));
-}
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_WriteBufferToMain				*/
-/* Object              : Write buffer to the main memory			*/
-/* Input Parameters    : DataFlash Service					*/
-/*		: <BufferCommand> = command to send to buffer1 or buffer2	*/
-/*                     : <dest> = main memory address				*/
-/* Return value		: State of the dataflash				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_WriteBufferToMain (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char BufferCommand,
-	unsigned int dest )
-{
-	int cmdsize;
-	/* Test if the buffer command is correct */
-	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
-	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
-	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
-	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
-		return DATAFLASH_BAD_COMMAND;
-
-	/* no data to transmit or receive */
-	pDataFlash->pDataFlashDesc->tx_data_size = 0;
-
-	cmdsize = 4;
-	if (pDataFlash->pDevice->pages_number >= 16384)
-		cmdsize = 5;
-	/* Send the command to the dataflash */
-	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_PartialPageWrite					*/
-/* Object              : Erase partielly a page					*/
-/* Input Parameters    : <page> = page number					*/
-/*			: <AdrInpage> = adr to begin the fading			*/
-/*                     : <length> = Number of bytes to erase			*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_PartialPageWrite (
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	unsigned int dest,
-	unsigned int size)
-{
-	unsigned int page;
-	unsigned int AdrInPage;
-
-	page = dest / (pDataFlash->pDevice->pages_size);
-	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
-
-	/* Read the contents of the page in the Sram Buffer */
-	AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
-	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	/*Update the SRAM buffer */
-	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
-
-	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-	/* Erase page if a 128 Mbits device */
-	if (pDataFlash->pDevice->pages_number >= 16384) {
-		AT91F_PageErase(pDataFlash, page);
-		/* Rewrite the modified Sram Buffer in the main memory */
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	}
-
-	/* Rewrite the modified Sram Buffer in the main memory */
-	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size)));
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashWrite					*/
-/* Object              :							*/
-/* Input Parameters    : <*src> = Source buffer					*/
-/*                     : <dest> = dataflash adress				*/
-/*                     : <size> = data buffer size				*/
-/*------------------------------------------------------------------------------*/
-AT91S_DataFlashStatus AT91F_DataFlashWrite(
-	AT91PS_DataFlash pDataFlash,
-	unsigned char *src,
-	int dest,
-	int size )
-{
-	unsigned int length;
-	unsigned int page;
-	unsigned int status;
-
-	AT91F_SpiEnable(pDataFlash->pDevice->cs);
-
-	if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
-		return DATAFLASH_MEMORY_OVERFLOW;
-
-	/* If destination does not fit a page start address */
-	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) {
-		length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
-
-		if (size < length)
-			length = size;
-
-		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		/* Update size, source and destination pointers */
-		size -= length;
-		dest += length;
-		src += length;
-	}
-
-	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
-		/* program dataflash page */
-		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
-
-		status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size);
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		status = AT91F_PageErase(pDataFlash, page);
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-		if (!status)
-			return DATAFLASH_ERROR;
-
-		status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest);
-		if(!status)
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-
-		/* Update size, source and destination pointers */
-		size -= pDataFlash->pDevice->pages_size ;
-		dest += pDataFlash->pDevice->pages_size ;
-		src  += pDataFlash->pDevice->pages_size ;
-	}
-
-	/* If still some bytes to read */
-	if ( size > 0 ) {
-		/* program dataflash page */
-		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
-			return DATAFLASH_ERROR;
-
-		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY);
-	}
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataFlashRead 					*/
-/* Object              : Read a block in dataflash				*/
-/* Input Parameters    : 							*/
-/* Return value		: 							*/
-/*------------------------------------------------------------------------------*/
-int AT91F_DataFlashRead(
-	AT91PS_DataFlash pDataFlash,
-	unsigned long addr,
-	unsigned long size,
-	char *buffer)
-{
-	unsigned long SizeToRead;
-
-	AT91F_SpiEnable(pDataFlash->pDevice->cs);
-
-	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
-		return -1;
-
-	while (size) {
-		SizeToRead = (size < 0x8000)? size:0x8000;
-
-		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
-			return -1;
-
-		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK)
-			return -1;
-
-		size -= SizeToRead;
-		addr += SizeToRead;
-		buffer += SizeToRead;
-	}
-
-	return DATAFLASH_OK;
-}
-
-
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataflashProbe 					*/
-/* Object              : 							*/
-/* Input Parameters    : 							*/
-/* Return value	       : Dataflash status register				*/
-/*------------------------------------------------------------------------------*/
-int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
-{
-	AT91F_SpiEnable(cs);
-	AT91F_DataFlashGetStatus(pDesc);
-	return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
-}
-
-#endif

common/soft_i2c.c

@@ -29,7 +29,7 @@
 #ifdef	CONFIG_MPC8260			/* only valid for MPC8260 */
 #include <ioports.h>
 #endif
-#ifdef CONFIG_AT91RM9200DK		/* need this for the at91rm9200dk */
+#ifdef	CONFIG_AT91RM9200		/* need this for the at91rm9200 */
 #include <asm/io.h>
 #include <asm/arch/hardware.h>
 #endif

cpu/arm920t/at91rm9200/Makefile

@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
-	  lxt972.o serial.o usb.o
+	  lxt972.o serial.o usb.o spi.o
 SOBJS	= lowlevel_init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)

cpu/arm920t/at91rm9200/dm9161.c

@@ -95,7 +95,7 @@ UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
 		return TRUE;
 	}
 
-	if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) {
+	if ((stat1 & DM9161_100BASE_TX_HD) && (stat2 & DM9161_100HDX)) {
 		/*set MII for 100BaseTX and Half Duplex  */
 		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
 				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
@@ -140,7 +140,7 @@ UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
 	at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
 	/* set FDX, SPD, Link, INTR masks */
 	IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK |
-		     DM9161_LINK_MASK | DM9161_INTR_MASK);
+			DM9161_LINK_MASK | DM9161_INTR_MASK);
 	at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
 	at91rm9200_EmacDisableMDIO (p_mac);
 
@@ -174,10 +174,11 @@ UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
 	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
 		return FALSE;
 
-	/* Set the Auto_negotiation Advertisement Register */
-	/* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
+	/* Set the Auto_negotiation Advertisement Register	*/
+	/* MII advertising for Next page, 100BaseTxFD and HD,	*/
+	/* 10BaseTFD and HD, IEEE 802.3 */
 	PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
-		  DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
+			DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
 	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
 		return FALSE;
 

cpu/arm920t/at91rm9200/spi.c

@@ -0,0 +1,153 @@
+/* Driver for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+
+#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
+					the Continuous Array Read function */
+
+/* AC Characteristics */
+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS	(0xC << 16)
+#define DATAFLASH_TCHS	(0x1 << 24)
+
+#define AT91C_TIMEOUT_WRDY		200000
+#define AT91C_SPI_PCS0_SERIAL_DATAFLASH	0xE	/* Chip Select 0: NPCS0%1110 */
+#define AT91C_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
+
+/*-------------------------------------------------------------------*/
+/*	SPI DataFlash Init					     */
+/*-------------------------------------------------------------------*/
+void AT91F_SpiInit(void)
+{
+	/* Configure PIOs */
+	AT91C_BASE_PIOA->PIO_ASR =
+		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
+		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
+		AT91C_PA2_SPCK;
+	AT91C_BASE_PIOA->PIO_PDR =
+		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
+		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
+		AT91C_PA2_SPCK;
+	/* Enable CLock */
+	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
+
+	/* Reset the SPI */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
+
+	/* Configure SPI in Master Mode with No CS selected !!! */
+	AT91C_BASE_SPI->SPI_MR =
+		AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
+
+	/* Configure CS0 and CS3 */
+	*(AT91C_SPI_CSR + 0) =
+		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
+		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
+		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+
+	*(AT91C_SPI_CSR + 3) =
+		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
+		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
+		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
+}
+
+void AT91F_SpiEnable(int cs)
+{
+	switch(cs) {
+	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |=
+			((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) &
+				AT91C_SPI_PCS);
+		break;
+	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
+		/* Set up PIO SDC_TYPE to switch on DataFlash Card */
+		/* and not MMC/SDCard */
+		AT91C_BASE_PIOB->PIO_PER =
+			AT91C_PIO_PB7;	/* Set in PIO mode */
+		AT91C_BASE_PIOB->PIO_OER =
+			AT91C_PIO_PB7;	/* Configure in output */
+		/* Clear Output */
+		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
+		/* Configure PCS */
+		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+		AT91C_BASE_SPI->SPI_MR |=
+			((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
+		break;
+	}
+
+	/* SPI_Enable */
+	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; }
+
+/*---------------------------------------------------------------------------*/
+/* \fn    AT91F_SpiWrite						     */
+/* \brief Set the PDC registers for a transfert				     */
+/*---------------------------------------------------------------------------*/
+unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
+{
+	unsigned int timeout;
+
+	pDesc->state = BUSY;
+
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+
+	/* Initialize the Transmit and Receive Pointer */
+	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
+	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
+
+	/* Intialize the Transmit and Receive Counters */
+	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
+	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
+
+	if ( pDesc->tx_data_size != 0 ) {
+		/* Initialize the Next Transmit and Next Receive Pointer */
+		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
+		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
+
+		/* Intialize the Next Transmit and Next Receive Counters */
+		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
+		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
+	}
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+	timeout = 0;
+
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
+	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
+		((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+	pDesc->state = IDLE;
+
+	if (timeout >= CFG_SPI_WRITE_TOUT){
+		printf("Error Timeout\n\r");
+		return DATAFLASH_ERROR;
+	}
+
+	return DATAFLASH_OK;
+}
+
+#endif
+

cpu/arm920t/start.S

@@ -27,7 +27,9 @@
 
 #include <config.h>
 #include <version.h>
-
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+#include	<led.h>
+#endif
 
 /*
  *************************************************************************
@@ -116,6 +118,69 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
+#if	CONFIG_AT91RM9200
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+	bl LED_init
+	bl red_LED_on
+#endif
+
+#ifdef CONFIG_BOOTBINFUNC
+/* code based on entry.S from ATMEL */
+#define AT91C_BASE_CKGR 0xFFFFFC20
+#define CKGR_MOR 0
+	/* Get the CKGR Base Address */
+	ldr     r1, =AT91C_BASE_CKGR
+
+/* Main oscillator Enable register	APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
+/*	ldr 	r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
+	ldr 	r0, =0x0000FF01
+	str     r0, [r1, #CKGR_MOR]
+	/* Add loop to compensate Main Oscillator startup time */
+	ldr 	r0, =0x00000010
+LoopOsc:
+	subs    r0, r0, #1
+	bhi     LoopOsc
+	/* scratch stack */
+	ldr 	r1, =0x00204000
+	/* Insure word alignment */
+	bic     r1, r1, #3
+	/* Init stack SYS	 */
+	mov     sp, r1
+	/*
+	 * This does a lot more than just set up the memory, which
+	 * is why it's called lowlevelinit
+	 */
+	bl	lowlevelinit /* in memsetup.S */
+	bl	icache_enable;
+	/* ------------------------------------
+	 * Read/modify/write CP15 control register
+	 * -------------------------------------
+	 * read cp15 control register (cp15 r1) in r0
+	 * ------------------------------------
+	 */
+	mrc     p15, 0, r0, c1, c0, 0
+	/* Reset bit :Little Endian end fast bus mode */
+	ldr     r3, =0xC0000080
+	/* Set bit :Asynchronous clock mode, Not Fast Bus */
+	ldr     r4, =0xC0000000
+	bic     r0, r0, r3
+	orr     r0, r0, r4
+	/* write r0 in cp15 control register (cp15 r1) */
+	mcr     p15, 0, r0, c1, c0, 0
+#endif /* CONFIG_BOOTBINFUNC */
+	/*
+	 * relocate exeception table
+	 */
+	ldr	r0, =_start
+	ldr	r1, =0x0
+	mov	r2, #16
+copyex:
+	subs	r2, r2, #1
+	ldr	r3, [r0], #4
+	str	r3, [r1], #4
+	bne	copyex
+#endif
+
 /* turn off the watchdog */
 #if defined(CONFIG_S3C2400)
 # define pWTCON		0x15300000
@@ -160,6 +225,26 @@ reset:
 	bl	cpu_init_crit
 #endif
 
+#ifdef	CONFIG_AT91RM9200
+#ifdef CONFIG_BOOTBINFUNC
+relocate:				/* relocate U-Boot to RAM	    */
+	adr	r0, _start		/* r0 <- current position of code   */
+	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
+	cmp     r0, r1                  /* don't reloc during debug         */
+	beq     stack_setup
+
+	ldr	r2, _armboot_start
+	ldr	r3, _bss_start
+	sub	r2, r3, r2		/* r2 <- size of armboot            */
+	add	r2, r0, r2		/* r2 <- source end address         */
+
+copy_loop:
+	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
+	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
+	cmp	r0, r2			/* until source end addreee [r2]    */
+	ble	copy_loop
+#endif /* CONFIG_BOOTBINFUNC */
+#else
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
 	adr	r0, _start		/* r0 <- current position of code   */
@@ -178,7 +263,7 @@ copy_loop:
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
+#endif
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
@@ -262,7 +347,11 @@ cpu_init_crit:
 	 * find a lowlevel_init.S in your board directory.
 	 */
 	mov	ip, lr
+#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
+
+#else
 	bl	lowlevel_init
+#endif
 	mov	lr, ip
 	mov	pc, lr
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */

drivers/Makefile

@@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)libdrivers.a
 
-COBJS	= 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
+COBJS	= 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o atmel_usart.o \
 	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o enc28j60.o \

drivers/at45.c

@@ -0,0 +1,569 @@
+/* Driver for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+
+/*
+ * spi.c API
+ */
+extern unsigned int	AT91F_SpiWrite (AT91PS_DataflashDesc pDesc);
+extern void 		AT91F_SpiEnable(int cs);
+
+#define AT91C_TIMEOUT_WRDY			200000
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashSendCommand					*/
+/* \brief Generic function to send a command to the dataflash		*/
+/*----------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char OpCode,
+	unsigned int CmdSize,
+	unsigned int DataflashAddress)
+{
+	unsigned int adr;
+
+	if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* process the address to obtain page address and byte address */
+	adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << 
+		pDataFlash->pDevice->page_offset) + (DataflashAddress % 
+		(pDataFlash->pDevice->pages_size));
+
+	/* fill the  command  buffer */
+	pDataFlash->pDataFlashDesc->command[0] = OpCode;
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+		pDataFlash->pDataFlashDesc->command[1] = 
+			(unsigned char)((adr & 0x0F000000) >> 24);
+		pDataFlash->pDataFlashDesc->command[2] = 
+			(unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[3] = 
+			(unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[4] = 
+			(unsigned char)(adr & 0x000000FF);
+	} else {
+		pDataFlash->pDataFlashDesc->command[1] = 
+			(unsigned char)((adr & 0x00FF0000) >> 16);
+		pDataFlash->pDataFlashDesc->command[2] = 
+			(unsigned char)((adr & 0x0000FF00) >> 8);
+		pDataFlash->pDataFlashDesc->command[3] = 
+			(unsigned char)(adr & 0x000000FF);
+		pDataFlash->pDataFlashDesc->command[4] = 0;
+	}
+	pDataFlash->pDataFlashDesc->command[5] = 0;
+	pDataFlash->pDataFlashDesc->command[6] = 0;
+	pDataFlash->pDataFlashDesc->command[7] = 0;
+
+	/* Initialize the SpiData structure for the spi write fuction */
+	pDataFlash->pDataFlashDesc->tx_cmd_pt   =  
+		pDataFlash->pDataFlashDesc->command;
+	pDataFlash->pDataFlashDesc->tx_cmd_size =  CmdSize;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt   =  
+		pDataFlash->pDataFlashDesc->command;
+	pDataFlash->pDataFlashDesc->rx_cmd_size =  CmdSize;
+
+	/* send the command and read the data */
+	return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); }
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashGetStatus					*/
+/* \brief Read the status register of the dataflash			*/
+/*----------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) 
+{
+	AT91S_DataFlashStatus status;
+
+	/* if a transfert is in progress ==> return 0 */
+	if( (pDesc->state) != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* first send the read status command (D7H) */
+	pDesc->command[0] = DB_STATUS;
+	pDesc->command[1] = 0;
+
+	pDesc->DataFlash_state  = GET_STATUS;
+	pDesc->tx_data_size 	= 0;	/* Transmit the command */
+					/* and receive response */
+	pDesc->tx_cmd_pt 		= pDesc->command;
+	pDesc->rx_cmd_pt 		= pDesc->command;
+	pDesc->rx_cmd_size 		= 2;
+	pDesc->tx_cmd_size 		= 2;
+	status = AT91F_SpiWrite (pDesc);
+
+	pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
+
+	return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn    AT91F_DataFlashWaitReady					*/
+/* \brief wait for dataflash ready (bit7 of the status register == 1)	*/
+/*----------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc 
+pDataFlashDesc, unsigned int timeout) 
+{
+	pDataFlashDesc->DataFlash_state = IDLE;
+
+	do {
+		AT91F_DataFlashGetStatus(pDataFlashDesc);
+		timeout--;
+	} while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && 
+			(timeout > 0) );
+
+	if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
+		return DATAFLASH_ERROR;
+
+	return DATAFLASH_OK;
+}
+
+
+/*--------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashContinuousRead 			    */
+/* Object              : Continuous stream Read 			    */
+/* Input Parameters    : DataFlash Service				    */
+/*						: <src> = dataflash address */
+/*                     : <*dataBuffer> = data buffer pointer		    */
+/*                     : <sizeToRead> = data buffer size		    */
+/* Return value		: State of the dataflash			    */
+/*--------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
+	AT91PS_DataFlash pDataFlash,
+	int src,
+	unsigned char *dataBuffer,
+	int sizeToRead )
+{
+	AT91S_DataFlashStatus status;
+	/* Test the size to read in the device */
+	if ( (src + sizeToRead) > 
+		(pDataFlash->pDevice->pages_size * 
+		(pDataFlash->pDevice->pages_number)))
+		return DATAFLASH_MEMORY_OVERFLOW;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
+	pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
+	pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
+
+	status = AT91F_DataFlashSendCommand 
+			(pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src);
+	/* Send the command to the dataflash */
+	return(status);
+}
+
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashPagePgmBuf			     */
+/* Object              : Main memory page program thru buffer 1 or buffer 2  */
+/* Input Parameters    : DataFlash Service				     */
+/*						: <*src> = Source buffer     */
+/*                     : <dest> = dataflash destination address		     */
+/*                     : <SizeToWrite> = data buffer size		     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int SizeToWrite)
+{
+	int cmdsize;
+	pDataFlash->pDataFlashDesc->tx_data_pt = src;
+	pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite;
+	pDataFlash->pDataFlashDesc->rx_data_pt = src;
+	pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
+
+	cmdsize = 4;
+	/* Send the command to the dataflash */
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, 
+cmdsize, dest)); }
+
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_MainMemoryToBufferTransfert		     */
+/* Object              : Read a page in the SRAM Buffer 1 or 2		     */
+/* Input Parameters    : DataFlash Service				     */
+/*                     : Page concerned					     */
+/*                     : 						     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_PAGE_2_BUF1_TRF) 
+		&& (BufferCommand != DB_PAGE_2_BUF2_TRF))
+		return DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, 
+page*pDataFlash->pDevice->pages_size));
+}
+
+
+/*-------------------------------------------------------------------------- */
+/* Function Name       : AT91F_DataFlashWriteBuffer			     */
+/* Object              : Write data to the internal sram buffer 1 or 2	     */
+/* Input Parameters    : DataFlash Service				     */
+/*			: <BufferCommand> = command to write buffer1 or 2    */
+/*                     : <*dataBuffer> = data buffer to write		     */
+/*                     : <bufferAddress> = address in the internal buffer    */
+/*                     : <SizeToWrite> = data buffer size		     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned char *dataBuffer,
+	unsigned int bufferAddress,
+	int SizeToWrite )
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	if ((BufferCommand != DB_BUF1_WRITE) 
+		&& (BufferCommand != DB_BUF2_WRITE))
+		return DATAFLASH_BAD_COMMAND;
+
+	/* buffer address must be lower than page size */
+	if (bufferAddress > pDataFlash->pDevice->pages_size)
+		return DATAFLASH_BAD_ADDRESS;
+
+	if ( (pDataFlash->pDataFlashDesc->state)  != IDLE)
+		return DATAFLASH_BUSY;
+
+	/* Send first Write Command */
+	pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
+	pDataFlash->pDataFlashDesc->command[1] = 0;
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+	    	pDataFlash->pDataFlashDesc->command[2] = 0;
+	    	pDataFlash->pDataFlashDesc->command[3] = 
+			(unsigned char)(((unsigned int)(bufferAddress &  
+				pDataFlash->pDevice->byte_mask)) >> 8);
+	    	pDataFlash->pDataFlashDesc->command[4] = 
+			(unsigned char)((unsigned int)bufferAddress  & 0x00FF);
+		cmdsize = 5;
+	} else {
+	    	pDataFlash->pDataFlashDesc->command[2] = 
+			(unsigned char)(((unsigned int)(bufferAddress & 
+				pDataFlash->pDevice->byte_mask)) >> 8);
+	    	pDataFlash->pDataFlashDesc->command[3] = 
+			(unsigned char)((unsigned int)bufferAddress  & 0x00FF);
+	    	pDataFlash->pDataFlashDesc->command[4] = 0;
+		cmdsize = 4;
+	}
+
+	pDataFlash->pDataFlashDesc->tx_cmd_pt 	 = 
+		pDataFlash->pDataFlashDesc->command;
+	pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize;
+	pDataFlash->pDataFlashDesc->rx_cmd_pt 	 = 
+		pDataFlash->pDataFlashDesc->command;
+	pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize;
+
+	pDataFlash->pDataFlashDesc->rx_data_pt 	= dataBuffer;
+	pDataFlash->pDataFlashDesc->tx_data_pt 	= dataBuffer;
+	pDataFlash->pDataFlashDesc->rx_data_size 	= SizeToWrite;
+	pDataFlash->pDataFlashDesc->tx_data_size 	= SizeToWrite;
+
+	return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
+}
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PageErase                                     */
+/* Object              : Erase a page 					     */
+/* Input Parameters    : DataFlash Service				     */
+/*                     : Page concerned					     */
+/*                     : 						     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_PageErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int page)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, 
+page*pDataFlash->pDevice->pages_size));
+}
+
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_BlockErase                                    */
+/* Object              : Erase a Block 					     */
+/* Input Parameters    : DataFlash Service				     */
+/*                     : Page concerned					     */
+/*                     : 						     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_BlockErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int block)
+{
+	int cmdsize;
+	/* Test if the buffer command is legal */
+	/* no data to transmit or receive */
+    	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, 
+block*8*pDataFlash->pDevice->pages_size));
+}
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_WriteBufferToMain			     */
+/* Object              : Write buffer to the main memory		     */
+/* Input Parameters    : DataFlash Service				     */
+/*		: <BufferCommand> = command to send to buffer1 or buffer2    */
+/*                     : <dest> = main memory address			     */
+/* Return value		: State of the dataflash			     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int dest )
+{
+	int cmdsize;
+	/* Test if the buffer command is correct */
+	if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_PGM) &&
+	    (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
+		return DATAFLASH_BAD_COMMAND;
+
+	/* no data to transmit or receive */
+	pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+	cmdsize = 4;
+	if (pDataFlash->pDevice->pages_number >= 16384)
+		cmdsize = 5;
+	/* Send the command to the dataflash */
+	return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize,
+						dest)); }
+
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_PartialPageWrite				     */
+/* Object              : Erase partielly a page				     */
+/* Input Parameters    : <page> = page number				     */
+/*			: <AdrInpage> = adr to begin the fading		     */
+/*                     : <length> = Number of bytes to erase		     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_PartialPageWrite (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int size)
+{
+	unsigned int page;
+	unsigned int AdrInPage;
+
+	page = dest / (pDataFlash->pDevice->pages_size);
+	AdrInPage = dest % (pDataFlash->pDevice->pages_size);
+
+	/* Read the contents of the page in the Sram Buffer */
+	AT91F_MainMemoryToBufferTransfert(pDataFlash, 
+						DB_PAGE_2_BUF1_TRF, page);
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+	/*Update the SRAM buffer */
+	AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 
+					AdrInPage, size);
+
+	AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+					AT91C_TIMEOUT_WRDY);
+
+	/* Erase page if a 128 Mbits device */
+	if (pDataFlash->pDevice->pages_number >= 16384) {
+		AT91F_PageErase(pDataFlash, page);
+		/* Rewrite the modified Sram Buffer in the main memory */
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+	}
+
+	/* Rewrite the modified Sram Buffer in the main memory */
+	return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, 
+				(page*pDataFlash->pDevice->pages_size)));
+}
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashWrite				     */
+/* Object              :						     */
+/* Input Parameters    : <*src> = Source buffer				     */
+/*                     : <dest> = dataflash adress			     */
+/*                     : <size> = data buffer size			     */
+/*---------------------------------------------------------------------------*/ 
+AT91S_DataFlashStatus AT91F_DataFlashWrite(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	int dest,
+	int size )
+{
+	unsigned int length;
+	unsigned int page;
+	unsigned int status;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if ( (dest + size) > (pDataFlash->pDevice->pages_size * 
+					(pDataFlash->pDevice->pages_number)))
+		return DATAFLASH_MEMORY_OVERFLOW;
+
+	/* If destination does not fit a page start address */
+	if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size)))  != 0 ) 
+	{
+		length = pDataFlash->pDevice->pages_size - 
+				(dest % 
+				((unsigned int)
+				(pDataFlash->pDevice->pages_size)));
+
+		if (size < length)
+			length = size;
+
+		if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+			AT91C_TIMEOUT_WRDY);
+
+		/* Update size, source and destination pointers */
+		size -= length;
+		dest += length;
+		src += length;
+	}
+
+	while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
+		/* program dataflash page */
+		page = (unsigned int)dest / (pDataFlash->pDevice->pages_size);
+
+		status = AT91F_DataFlashWriteBuffer(pDataFlash, 
+				DB_BUF1_WRITE, src, 0, 
+				pDataFlash->pDevice->pages_size);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+
+		status = AT91F_PageErase(pDataFlash, page);
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+		if (!status)
+			return DATAFLASH_ERROR;
+
+		status = AT91F_WriteBufferToMain (pDataFlash, 
+						DB_BUF1_PAGE_PGM, dest);
+		if(!status)
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+
+		/* Update size, source and destination pointers */
+		size -= pDataFlash->pDevice->pages_size;
+		dest += pDataFlash->pDevice->pages_size;
+		src  += pDataFlash->pDevice->pages_size;
+	}
+
+	/* If still some bytes to read */
+	if ( size > 0 ) {
+		/* program dataflash page */
+		if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
+			return DATAFLASH_ERROR;
+
+		AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+						AT91C_TIMEOUT_WRDY);
+	}
+	return DATAFLASH_OK;
+}
+
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataFlashRead 				     */
+/* Object              : Read a block in dataflash			     */
+/* Input Parameters    : 						     */
+/* Return value		: 						     */
+/*---------------------------------------------------------------------------*/
+int AT91F_DataFlashRead(
+	AT91PS_DataFlash pDataFlash,
+	unsigned long addr,
+	unsigned long size,
+	char *buffer)
+{
+	unsigned long SizeToRead;
+
+	AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+	if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+					AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
+		return -1;
+
+	while (size) {
+		SizeToRead = (size < 0x8000)? size:0x8000;
+
+		if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 
+					AT91C_TIMEOUT_WRDY) != DATAFLASH_OK)
+			return -1;
+
+		if (AT91F_DataFlashContinuousRead (pDataFlash, addr, 
+				(uchar *) buffer, SizeToRead) != DATAFLASH_OK)
+			return -1;
+
+		size -= SizeToRead;
+		addr += SizeToRead;
+		buffer += SizeToRead;
+	}
+
+	return DATAFLASH_OK;
+}
+
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataflashProbe 				     */
+/* Object              : 						     */
+/* Input Parameters    : 						     */
+/* Return value	       : Dataflash status register			     */
+/*---------------------------------------------------------------------------*/ 
+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) {
+	AT91F_SpiEnable(cs);
+	AT91F_DataFlashGetStatus(pDesc);
+	return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); 
+}
+
+#endif
+
+

drivers/dataflash.c

@@ -26,18 +26,67 @@
 AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
 static AT91S_DataFlash DataFlashInst;
 
+#ifdef CONFIG_AT91SAM9260EK
+int cs[][CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CFG_DATAFLASH_LOGIC_ADDR_CS1, 1}
+};
+#elif defined(CONFIG_AT91SAM9263EK)
+int cs[][CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}	/* Logical adress, CS */
+};
+#else
 int cs[][CFG_MAX_DATAFLASH_BANKS] = {
 	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
 	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
 };
+#endif
 
 /*define the area offsets*/
+#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AT91SAM9263EK)
+#if	defined(CONFIG_NEW_PARTITION)
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000,	0x00003FFF, 	FLAG_PROTECT_SET,	0,    		"Bootstrap"},  	/* ROM code */
+	{0x00004200,	0x000083FF, 	FLAG_PROTECT_CLEAR,	0,    		"Environment"},	/* u-boot environment */
+	{0x00008400,	0x0003DDFF,	FLAG_PROTECT_SET,	0,    		"U-Boot"},     	/* u-boot code */
+	{0x0003DE00,	0x00041FFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"MON"},	       	/* Room for alternative boot monitor */
+	{0x00042000,	0x0018BFFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"OS"},	       	/* data area size to tune */
+	{0x0018C000,	0xFFFFFFFF,	FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"FS"},	       	/* data area size to tune */
+};
+#else
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0, 0x3fff, FLAG_PROTECT_SET},			/* ROM code */
+	{0x4000, 0x7fff, FLAG_PROTECT_CLEAR},		/* u-boot environment */
+	{0x8000, 0x37fff, FLAG_PROTECT_SET},		/* u-boot code */
+	{0x38000, 0x1fffff, FLAG_PROTECT_CLEAR},	/* data area size to tune */
+};
+#endif
+#elif defined(CONFIG_NEW_PARTITION)
+/*define the area offsets*/
+/* Invalid partitions should be defined with start > end */ 
+dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = {
+	{0x00000000, 0x000083ff, FLAG_PROTECT_SET,	0,		"Bootstrap"},	/* ROM code */
+	{0x00008400, 0x00020fff, FLAG_PROTECT_SET,	0,		"U-Boot"},	/* u-boot code */
+	{0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR,	0,		"Environment"},	/* u-boot environment 8Kb */
+	{0x00029400, 0x00041fff, FLAG_PROTECT_INVALID,	0,		"<Unused>"},	/* Rest of Sector 1 */
+	{0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"OS"},	/* data area size to tune */
+	{0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"FS"},	/* data area size to tune */
+
+	{0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR,	FLAG_SETENV,	"Data"},	/* data area */
+	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
+	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
+	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
+	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
+	{0xffffffff, 0x00000000, FLAG_PROTECT_INVALID,	0,		"<Invalid>"},	/* Invalid */
+};
+#else
 dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
 	{0, 0x7fff, FLAG_PROTECT_SET},			/* ROM code */
 	{0x8000, 0x1ffff, FLAG_PROTECT_SET},		/* u-boot code */
 	{0x20000, 0x27fff, FLAG_PROTECT_CLEAR},		/* u-boot environment */
 	{0x28000, 0x1fffff, FLAG_PROTECT_CLEAR},	/* data area size to tune */
 };
+#endif
 
 extern void AT91F_SpiInit (void);
 extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc);
@@ -45,22 +94,28 @@ extern int AT91F_DataFlashRead (AT91PS_DataFlash pDataFlash,
 				unsigned long addr,
 				unsigned long size, char *buffer);
 extern int AT91F_DataFlashWrite( AT91PS_DataFlash pDataFlash,
-				    unsigned char *src,
-			            int dest,
-				    int size );
+				unsigned char *src,
+				int dest,
+				int size );
 
 int AT91F_DataflashInit (void)
 {
 	int i, j;
 	int dfcode;
+	int part = 0;
+	int last_part;
+	int found[CFG_MAX_DATAFLASH_BANKS];
+	unsigned char protected;
 
 	AT91F_SpiInit ();
 
 	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+		found[i] = 0;
 		dataflash_info[i].Desc.state = IDLE;
 		dataflash_info[i].id = 0;
 		dataflash_info[i].Device.pages_number = 0;
-		dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc);
+		dfcode = AT91F_DataflashProbe (cs[i][1], 
+				&dataflash_info[i].Desc);
 
 		switch (dfcode) {
 		case AT45DB161:
@@ -72,6 +127,7 @@ int AT91F_DataflashInit (void)
 			dataflash_info[i].Desc.DataFlash_state = IDLE;
 			dataflash_info[i].logical_address = cs[i][0];
 			dataflash_info[i].id = dfcode;
+			found[i] += dfcode;;
 			break;
 
 		case AT45DB321:
@@ -83,6 +139,7 @@ int AT91F_DataflashInit (void)
 			dataflash_info[i].Desc.DataFlash_state = IDLE;
 			dataflash_info[i].logical_address = cs[i][0];
 			dataflash_info[i].id = dfcode;
+			found[i] += dfcode;;
 			break;
 
 		case AT45DB642:
@@ -94,7 +151,9 @@ int AT91F_DataflashInit (void)
 			dataflash_info[i].Desc.DataFlash_state = IDLE;
 			dataflash_info[i].logical_address = cs[i][0];
 			dataflash_info[i].id = dfcode;
+			found[i] += dfcode;;
 			break;
+
 		case AT45DB128:
 			dataflash_info[i].Device.pages_number = 16384;
 			dataflash_info[i].Device.pages_size = 1056;
@@ -104,9 +163,11 @@ int AT91F_DataflashInit (void)
 			dataflash_info[i].Desc.DataFlash_state = IDLE;
 			dataflash_info[i].logical_address = cs[i][0];
 			dataflash_info[i].id = dfcode;
+			found[i] += dfcode;;
 			break;
 
 		default:
+			dfcode = 0;
 			break;
 		}
 		/* set the last area end to the dataflash size*/
@@ -114,16 +175,64 @@ int AT91F_DataflashInit (void)
 				(dataflash_info[i].Device.pages_number *
 				dataflash_info[i].Device.pages_size)-1;
 
+		last_part=0;
 		/* set the area addresses */
 		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
-			dataflash_info[i].Device.area_list[j].start = area_list[j].start + dataflash_info[i].logical_address;
-			dataflash_info[i].Device.area_list[j].end = area_list[j].end + dataflash_info[i].logical_address;
-			dataflash_info[i].Device.area_list[j].protected = area_list[j].protected;
+			if(found[i]!=0) {
+				dataflash_info[i].Device.area_list[j].start = 
+					area_list[part].start + 
+					dataflash_info[i].logical_address;
+				if(area_list[part].end == 0xffffffff) {
+					dataflash_info[i].Device.area_list[j].end = 
+						dataflash_info[i].end_address + 
+						dataflash_info	[i].logical_address;
+					last_part = 1;
+				} else {
+					dataflash_info[i].Device.area_list[j].end = 
+						area_list[part].end + 
+						dataflash_info[i].logical_address;
+				}
+				protected = area_list[part].protected;
+				/* Set the environment according to the label...*/
+				if(protected == FLAG_PROTECT_INVALID) {
+					dataflash_info[i].Device.area_list[j].protected = 
+						FLAG_PROTECT_INVALID;
+				} else {
+					dataflash_info[i].Device.area_list[j].protected = 
+						protected;
+				}
+				strcpy((char*)(dataflash_info[i].Device.area_list[j].label),
+						(const char *)area_list[part].label);
+			}
+			part++;
 		}
 	}
-	return (1);
+	return found[0];
 }
 
+#ifdef	CONFIG_NEW_DF_PARTITION
+int AT91F_DataflashSetEnv (void)
+{
+	int i, j;
+	int part;
+	unsigned char env;
+	unsigned char s[32];	/* Will fit a long int in hex */
+	unsigned long start;
+	for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+		for(j = 0; j<NB_DATAFLASH_AREA; j++) {
+			env = area_list[part].setenv;
+			/* Set the environment according to the label...*/
+			if((env & FLAG_SETENV) == FLAG_SETENV) {
+				start = 
+				dataflash_info[i].Device.area_list[j].start;
+				sprintf(s,"%X",start);
+				setenv(area_list[part].label,s);
+			}
+			part++;
+		}
+	}
+}
+#endif
 
 void dataflash_print_info (void)
 {
@@ -131,25 +240,25 @@ void dataflash_print_info (void)
 
 	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
 		if (dataflash_info[i].id != 0) {
-			printf ("DataFlash:");
+			printf("DataFlash:");
 			switch (dataflash_info[i].id) {
 			case AT45DB161:
-				printf ("AT45DB161\n");
+				printf("AT45DB161\n");
 				break;
 
 			case AT45DB321:
-				printf ("AT45DB321\n");
+				printf("AT45DB321\n");
 				break;
 
 			case AT45DB642:
-				printf ("AT45DB642\n");
+				printf("AT45DB642\n");
 				break;
 			case AT45DB128:
-				printf ("AT45DB128\n");
+				printf("AT45DB128\n");
 				break;
 			}
 
-			printf ("Nb pages: %6d\n"
+			printf("Nb pages: %6d\n"
 				"Page Size: %6d\n"
 				"Size=%8d bytes\n"
 				"Logical address: 0x%08X\n",
@@ -159,28 +268,44 @@ void dataflash_print_info (void)
 				dataflash_info[i].Device.pages_size,
 				(unsigned int) dataflash_info[i].logical_address);
 			for (j=0; j< NB_DATAFLASH_AREA; j++) {
-				printf ("Area %i:\t%08lX to %08lX %s\n", j,
-					dataflash_info[i].Device.area_list[j].start,
-					dataflash_info[i].Device.area_list[j].end,
-					(dataflash_info[i].Device.area_list[j].protected ==
-					FLAG_PROTECT_SET) ? "(RO)" : "");
+				switch(dataflash_info[i].Device.area_list[j].protected) {
+				case	FLAG_PROTECT_SET:
+				case	FLAG_PROTECT_CLEAR:
+					printf("Area %i:\t%08lX to %08lX %s", j,
+						dataflash_info[i].Device.area_list[j].start,
+						dataflash_info[i].Device.area_list[j].end,
+						(dataflash_info[i].Device.area_list[j].protected==FLAG_PROTECT_SET) ? "(RO)" : "    ");
+#ifdef	CONFIG_NEW_DF_PARTITION
+						printf(" %s\n",	dataflash_info[i].Device.area_list[j].label);
+#else
+						printf("\n");
+#endif
+					break;
+#ifdef	CONFIG_NEW_DF_PARTITION
+				case	FLAG_PROTECT_INVALID:
+					break;
+#endif
+				}
 			}
 		}
 	}
 }
 
 
-/*------------------------------------------------------------------------------*/
-/* Function Name       : AT91F_DataflashSelect 					*/
-/* Object              : Select the correct device				*/
-/*------------------------------------------------------------------------------*/
-AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, unsigned long *addr)
+/*---------------------------------------------------------------------------*/
+/* Function Name       : AT91F_DataflashSelect 				     */
+/* Object              : Select the correct device			     */
+/*---------------------------------------------------------------------------*/
+AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, 
+				unsigned long *addr)
 {
 	char addr_valid = 0;
 	int i;
 
 	for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
-		if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) {
+		if ( dataflash_info[i].id
+			&& ((((int) addr) & 0xFF000000) ==
+			dataflash_info[i].logical_address)) {
 			addr_valid = 1;
 			break;
 		}
@@ -194,10 +319,10 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, unsigned long *
 	return (pFlash);
 }
 
-/*------------------------------------------------------------------------------*/
-/* Function Name       : addr_dataflash 					*/
-/* Object              : Test if address is valid				*/
-/*------------------------------------------------------------------------------*/
+/*---------------------------------------------------------------------------*/
+/* Function Name       : addr_dataflash 		    		     */
+/* Object              : Test if address is valid			     */
+/*---------------------------------------------------------------------------*/
 int addr_dataflash (unsigned long addr)
 {
 	int addr_valid = 0;
@@ -213,25 +338,27 @@ int addr_dataflash (unsigned long addr)
 
 	return addr_valid;
 }
-/*-----------------------------------------------------------------------------*/
-/* Function Name       : size_dataflash 					*/
-/* Object              : Test if address is valid regarding the size		*/
-/*-----------------------------------------------------------------------------*/
-int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, unsigned long size)
+/*---------------------------------------------------------------------------*/
+/* Function Name       : size_dataflash 				     */
+/* Object              : Test if address is valid regarding the size	     */
+/*---------------------------------------------------------------------------*/
+int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, 
+			unsigned long size)
 {
 	/* is outside the dataflash */
 	if (((int)addr & 0x0FFFFFFF) > (pdataFlash->pDevice->pages_size *
 		pdataFlash->pDevice->pages_number)) return 0;
 	/* is too large for the dataflash */
 	if (size > ((pdataFlash->pDevice->pages_size *
-		pdataFlash->pDevice->pages_number) - ((int)addr & 0x0FFFFFFF))) return 0;
+		pdataFlash->pDevice->pages_number) - 
+		((int)addr & 0x0FFFFFFF))) return 0;
 
 	return 1;
 }
-/*-----------------------------------------------------------------------------*/
-/* Function Name       : prot_dataflash 					*/
-/* Object              : Test if destination area is protected			*/
-/*-----------------------------------------------------------------------------*/
+/*---------------------------------------------------------------------------*/
+/* Function Name       : prot_dataflash 				     */
+/* Object              : Test if destination area is protected		     */
+/*---------------------------------------------------------------------------*/
 int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr)
 {
 int area;
@@ -241,17 +368,23 @@ int area;
 			(addr < pdataFlash->pDevice->area_list[area].end))
 			break;
 	}
-	if (area == NB_DATAFLASH_AREA) return -1;
+	if (area == NB_DATAFLASH_AREA) 
+		return -1;
+
 	/*test protection value*/
-	if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_SET) return 0;
+	if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_SET) 
+		return 0;
+	if (pdataFlash->pDevice->area_list[area].protected == FLAG_PROTECT_INVALID) 
+		return 0;
 
 	return 1;
 }
-/*-----------------------------------------------------------------------------*/
-/* Function Name       : dataflash_real_protect				*/
-/* Object              : protect/unprotect area				*/
-/*-----------------------------------------------------------------------------*/
-int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr)
+/*--------------------------------------------------------------------------*/
+/* Function Name       : dataflash_real_protect				    */
+/* Object              : protect/unprotect area				    */
+/*--------------------------------------------------------------------------*/
+int dataflash_real_protect (int flag, unsigned long start_addr, 
+				unsigned long end_addr)
 {
 int i,j, area1, area2, addr_valid = 0;
 	/* find dataflash */
@@ -267,27 +400,38 @@ int i,j, area1, area2, addr_valid = 0;
 	}
 	/* find start area */
 	for (area1=0; area1 < NB_DATAFLASH_AREA; area1++) {
-		if (start_addr == dataflash_info[i].Device.area_list[area1].start) break;
+		if (start_addr == dataflash_info[i].Device.area_list[area1].start) 
+			break;
 	}
 	if (area1 == NB_DATAFLASH_AREA) return -1;
 	/* find end area */
 	for (area2=0; area2 < NB_DATAFLASH_AREA; area2++) {
-		if (end_addr == dataflash_info[i].Device.area_list[area2].end) break;
+		if (end_addr == dataflash_info[i].Device.area_list[area2].end) 
+			break;
 	}
-	if (area2 == NB_DATAFLASH_AREA) return -1;
+	if (area2 == NB_DATAFLASH_AREA) 
+		return -1;
 
 	/*set protection value*/
 	for(j = area1; j < area2+1 ; j++)
-		if (flag == 0) dataflash_info[i].Device.area_list[j].protected = FLAG_PROTECT_CLEAR;
-		else dataflash_info[i].Device.area_list[j].protected = FLAG_PROTECT_SET;
+		if(dataflash_info[i].Device.area_list[j].protected 
+				!= FLAG_PROTECT_INVALID) {
+			if (flag == 0) {
+				dataflash_info[i].Device.area_list[j].protected 
+					= FLAG_PROTECT_CLEAR;
+			} else {
+				dataflash_info[i].Device.area_list[j].protected 
+					= FLAG_PROTECT_SET;
+			}
+		}
 
 	return (area2-area1+1);
 }
 
-/*------------------------------------------------------------------------------*/
-/* Function Name       : read_dataflash 					*/
-/* Object              : dataflash memory read					*/
-/*------------------------------------------------------------------------------*/
+/*---------------------------------------------------------------------------*/
+/* Function Name       : read_dataflash 				     */
+/* Object              : dataflash memory read				     */
+/*---------------------------------------------------------------------------*/
 int read_dataflash (unsigned long addr, unsigned long size, char *result)
 {
 	unsigned long AddrToRead = addr;
@@ -305,12 +449,12 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result)
 }
 
 
-/*-----------------------------------------------------------------------------*/
-/* Function Name       : write_dataflash 				       */
-/* Object              : write a block in dataflash			       */
-/*-----------------------------------------------------------------------------*/
+/*---------------------------------------------------------------------------*/
+/* Function Name       : write_dataflash 				     */
+/* Object              : write a block in dataflash			     */
+/*---------------------------------------------------------------------------*/
 int write_dataflash (unsigned long addr_dest, unsigned long addr_src,
-		     unsigned long size)
+			unsigned long size)
 {
 	unsigned long AddrToWrite = addr_dest;
 	AT91PS_DataFlash pFlash = &DataFlashInst;
@@ -329,7 +473,8 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src,
 	if (AddrToWrite == -1)
 		return -1;
 
-	return AT91F_DataFlashWrite (pFlash, (uchar *)addr_src, AddrToWrite, size);
+	return AT91F_DataFlashWrite (pFlash, (uchar *)addr_src, 
+						AddrToWrite, size);
 }
 
 
@@ -339,22 +484,22 @@ void dataflash_perror (int err)
 	case ERR_OK:
 		break;
 	case ERR_TIMOUT:
-		printf ("Timeout writing to DataFlash\n");
+		printf("Timeout writing to DataFlash\n");
 		break;
 	case ERR_PROTECTED:
-		printf ("Can't write to protected DataFlash sectors\n");
+		printf("Can't write to protected/invalid DataFlash sectors\n");
 		break;
 	case ERR_INVAL:
-		printf ("Outside available DataFlash\n");
+		printf("Outside available DataFlash\n");
 		break;
 	case ERR_UNKNOWN_FLASH_TYPE:
-		printf ("Unknown Type of DataFlash\n");
+		printf("Unknown Type of DataFlash\n");
 		break;
 	case ERR_PROG_ERROR:
-		printf ("General DataFlash Programming Error\n");
+		printf("General DataFlash Programming Error\n");
 		break;
 	default:
-		printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);
+		printf("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);
 		break;
 	}
 }

include/asm-arm/arch-at91rm9200/AT91RM9200.h

@@ -27,9 +27,9 @@
 
 typedef volatile unsigned int AT91_REG;		/* Hardware register definition */
 
-/******************************************************************************/
-/*        SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface        */
-/******************************************************************************/
+/*****************************************************************************/
+/*        SOFTWARE API DEFINITION  FOR Timer Counter Channel Interface       */
+/*****************************************************************************/
 typedef struct _AT91S_TC
 {
 	AT91_REG	 TC_CCR; 	/* Channel Control Register */
@@ -45,24 +45,24 @@ typedef struct _AT91S_TC
 	AT91_REG	 TC_IMR; 	/* Interrupt Mask Register */
 } AT91S_TC, *AT91PS_TC;
 
-#define AT91C_TC_TIMER_DIV1_CLOCK	((unsigned int) 0x0 <<  0) /* (TC) MCK/2 */
-#define AT91C_TC_TIMER_DIV2_CLOCK	((unsigned int) 0x1 <<  0) /* (TC) MCK/8 */
-#define AT91C_TC_TIMER_DIV3_CLOCK	((unsigned int) 0x2 <<  0) /* (TC) MCK/32 */
-#define AT91C_TC_TIMER_DIV4_CLOCK	((unsigned int) 0x3 <<  0) /* (TC) MCK/128 */
-#define AT91C_TC_SLOW_CLOCK		((unsigned int) 0x4 <<  0) /* (TC) SLOW CLK */
-#define AT91C_TC_XC0_CLOCK		((unsigned int) 0x5 <<  0) /* (TC) XC0 */
-#define AT91C_TC_XC1_CLOCK		((unsigned int) 0x6 <<  0) /* (TC) XC1 */
-#define AT91C_TC_XC2_CLOCK		((unsigned int) 0x7 <<  0) /* (TC) XC2 */
-#define AT91C_TCB_TC0XC0S_NONE		((unsigned int) 0x1)       /* (TCB) None signal connected to XC0 */
-#define AT91C_TCB_TC1XC1S_NONE		((unsigned int) 0x1 <<  2) /* (TCB) None signal connected to XC1 */
-#define AT91C_TCB_TC2XC2S_NONE		((unsigned int) 0x1 <<  4) /* (TCB) None signal connected to XC2 */
-#define AT91C_TC_CLKDIS			((unsigned int) 0x1 <<  1) /* (TC) Counter Clock Disable Command */
-#define AT91C_TC_SWTRG			((unsigned int) 0x1 <<  2) /* (TC) Software Trigger Command */
-#define AT91C_TC_CLKEN			((unsigned int) 0x1 <<  0) /* (TC) Counter Clock Enable Command */
-
-/******************************************************************************/
-/*                  SOFTWARE API DEFINITION  FOR Usart                        */
-/******************************************************************************/
+#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 <<  0) /* (TC) MCK/2 */
+#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 <<  0) /* (TC) MCK/8 */
+#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 <<  0) /* (TC) MCK/32 */
+#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 <<  0) /* (TC) MCK/128 */
+#define AT91C_TC_SLOW_CLOCK	  ((unsigned int) 0x4 <<  0) /* (TC) SLOW CLK*/
+#define AT91C_TC_XC0_CLOCK	  ((unsigned int) 0x5 <<  0) /* (TC) XC0 */
+#define AT91C_TC_XC1_CLOCK	  ((unsigned int) 0x6 <<  0) /* (TC) XC1 */
+#define AT91C_TC_XC2_CLOCK	  ((unsigned int) 0x7 <<  0) /* (TC) XC2 */
+#define AT91C_TCB_TC0XC0S_NONE	  ((unsigned int) 0x1)       /* (TCB) None signal connected to XC0 */
+#define AT91C_TCB_TC1XC1S_NONE	  ((unsigned int) 0x1 <<  2) /* (TCB) None signal connected to XC1 */
+#define AT91C_TCB_TC2XC2S_NONE	  ((unsigned int) 0x1 <<  4) /* (TCB) None signal connected to XC2 */
+#define AT91C_TC_CLKDIS		  ((unsigned int) 0x1 <<  1) /* (TC) Counter Clock Disable Command */
+#define AT91C_TC_SWTRG		  ((unsigned int) 0x1 <<  2) /* (TC) Software Trigger Command */
+#define AT91C_TC_CLKEN		  ((unsigned int) 0x1 <<  0) /* (TC) Counter Clock Enable Command */
+
+/*****************************************************************************/
+/*                  SOFTWARE API DEFINITION  FOR Usart                       */
+/*****************************************************************************/
 typedef struct _AT91S_USART
 {
 	AT91_REG	 US_CR; 	/* Control Register */
@@ -94,9 +94,9 @@ typedef struct _AT91S_USART
 	AT91_REG	 US_PTSR; 	/* PDC Transfer Status Register */
 } AT91S_USART, *AT91PS_USART;
 
-/******************************************************************************/
-/*          SOFTWARE API DEFINITION  FOR Clock Generator Controler            */
-/******************************************************************************/
+/*****************************************************************************/
+/*          SOFTWARE API DEFINITION  FOR Clock Generator Controler           */
+/*****************************************************************************/
 typedef struct _AT91S_CKGR
 {
 	AT91_REG	 CKGR_MOR; 	/* Main Oscillator Register */
@@ -141,9 +141,9 @@ typedef struct _AT91S_CKGR
 #define AT91C_CKGR_USB_96M	((unsigned int) 0x1   << 28)	/* (CKGR) Divider for USB Ports */
 #define AT91C_CKGR_USB_PLL	((unsigned int) 0x1   << 29)	/* (CKGR) PLL Use */
 
-/******************************************************************************/
-/*        SOFTWARE API DEFINITION  FOR Parallel Input Output Controler        */
-/******************************************************************************/
+/*****************************************************************************/
+/*        SOFTWARE API DEFINITION  FOR Parallel Input Output Controler       */
+/*****************************************************************************/
 typedef struct _AT91S_PIO
 {
 	AT91_REG	 PIO_PER; 	/* PIO Enable Register */
@@ -184,9 +184,9 @@ typedef struct _AT91S_PIO
 } AT91S_PIO, *AT91PS_PIO;
 
 
-/******************************************************************************/
-/*              SOFTWARE API DEFINITION  FOR Debug Unit                       */
-/******************************************************************************/
+/*****************************************************************************/
+/*              SOFTWARE API DEFINITION  FOR Debug Unit                      */
+/*****************************************************************************/
 typedef struct _AT91S_DBGU
 {
 	AT91_REG	 DBGU_CR; 	/* Control Register */
@@ -242,9 +242,9 @@ typedef struct _AT91S_DBGU
 #define AT91C_US_PAR_NONE	((unsigned int) 0x4 <<  9) /* (DBGU) No Parity */
 #define AT91C_US_NBSTOP_1_BIT	((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
 
-/******************************************************************************/
-/*      SOFTWARE API DEFINITION  FOR Static Memory Controller 2 Interface     */
-/******************************************************************************/
+/*****************************************************************************/
+/*      SOFTWARE API DEFINITION  FOR Static Memory Controller 2 Interface    */
+/*****************************************************************************/
 typedef struct _AT91S_SMC2
 {
 	AT91_REG	 SMC2_CSR[8]; 	/* SMC2 Chip Select Register */
@@ -267,9 +267,9 @@ typedef struct _AT91S_SMC2
 #define AT91C_SMC2_RWSETUP		((unsigned int) 0x7 << 24) /* (SMC2) Read and Write Signal Setup Time */
 #define AT91C_SMC2_RWHOLD		((unsigned int) 0x7 << 29) /* (SMC2) Read and Write Signal Hold Time */
 
-/******************************************************************************/
-/*           SOFTWARE API DEFINITION  FOR Power Management Controler          */
-/******************************************************************************/
+/*****************************************************************************/
+/*           SOFTWARE API DEFINITION  FOR Power Management Controler         */
+/*****************************************************************************/
 typedef struct _AT91S_PMC
 {
 	AT91_REG	 PMC_SCER; 	/* System Clock Enable Register */
@@ -341,9 +341,9 @@ typedef struct _AT91S_PMC
 /*-------- PMC_SR : (PMC Offset: 0x68) PMC Status Register --------*/
 /*-------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register --------*/
 
-/******************************************************************************/
-/*              SOFTWARE API DEFINITION  FOR Ethernet MAC                     */
-/******************************************************************************/
+/*****************************************************************************/
+/*              SOFTWARE API DEFINITION  FOR Ethernet MAC                    */
+/*****************************************************************************/
 typedef struct _AT91S_EMAC
 {
 	AT91_REG	 EMAC_CTL; 	/* Network Control Register */
@@ -424,11 +424,11 @@ typedef struct _AT91S_EMAC
 #define AT91C_EMAC_MDIO		((unsigned int) 0x1 <<  1) /* (EMAC) */
 #define AT91C_EMAC_IDLE		((unsigned int) 0x1 <<  2) /* (EMAC) */
 
-/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- */
+/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register ------- */
 #define AT91C_EMAC_LEN		((unsigned int) 0x7FF <<  0) /* (EMAC) */
 #define AT91C_EMAC_NCRC		((unsigned int) 0x1 << 15) /* (EMAC) */
 
-/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- */
+/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register ------- */
 #define AT91C_EMAC_OVR		((unsigned int) 0x1 <<  0) /* (EMAC) */
 #define AT91C_EMAC_COL		((unsigned int) 0x1 <<  1) /* (EMAC) */
 #define AT91C_EMAC_RLE		((unsigned int) 0x1 <<  2) /* (EMAC) */
@@ -442,7 +442,7 @@ typedef struct _AT91S_EMAC
 #define AT91C_EMAC_REC		((unsigned int) 0x1 <<  1) /* (EMAC) */
 #define AT91C_EMAC_RSR_OVR	((unsigned int) 0x1 <<  2) /* (EMAC) */
 
-/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- */
+/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register ------- */
 #define AT91C_EMAC_DONE		((unsigned int) 0x1 <<  0) /* (EMAC) */
 #define AT91C_EMAC_RCOM		((unsigned int) 0x1 <<  1) /* (EMAC) */
 #define AT91C_EMAC_RBNA		((unsigned int) 0x1 <<  2) /* (EMAC) */
@@ -456,8 +456,8 @@ typedef struct _AT91S_EMAC
 #define AT91C_EMAC_ROVR		((unsigned int) 0x1 << 10) /* (EMAC) */
 #define AT91C_EMAC_HRESP	((unsigned int) 0x1 << 11) /* (EMAC) */
 
-/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- */
-/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- */
+/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register ------- */
+/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register ------ */
 /* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */
 /* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */
 #define AT91C_EMAC_DATA		((unsigned int) 0xFFFF <<  0) /* (EMAC) */
@@ -471,9 +471,9 @@ typedef struct _AT91S_EMAC
 #define AT91C_EMAC_HIGH		((unsigned int) 0x1  << 30) /* (EMAC) */
 #define AT91C_EMAC_LOW		((unsigned int) 0x1  << 31) /* (EMAC) */
 
-/******************************************************************************/
-/*           SOFTWARE API DEFINITION  FOR Serial Parallel Interface           */
-/******************************************************************************/
+/*****************************************************************************/
+/*           SOFTWARE API DEFINITION  FOR Serial Parallel Interface          */
+/*****************************************************************************/
 typedef struct _AT91S_SPI
 {
 	AT91_REG	 SPI_CR; 	/* Control Register */
@@ -536,7 +536,7 @@ typedef struct _AT91S_SPI
 #define AT91C_SPI_SPIENS	((unsigned int) 0x1 << 16) /* (SPI) Enable Status */
 
 /* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
-/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
+/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register ------- */
 /* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */
 /* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */
 #define AT91C_SPI_CPOL		((unsigned int) 0x1  <<  0) /* (SPI) Clock Polarity */
@@ -555,9 +555,9 @@ typedef struct _AT91S_SPI
 #define AT91C_SPI_DLYBS		((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */
 #define AT91C_SPI_DLYBCT	((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */
 
-/******************************************************************************/
-/*           SOFTWARE API DEFINITION  FOR Peripheral Data Controller          */
-/******************************************************************************/
+/*****************************************************************************/
+/*           SOFTWARE API DEFINITION  FOR Peripheral Data Controller         */
+/*****************************************************************************/
 typedef struct _AT91S_PDC
 {
 	AT91_REG	 PDC_RPR; 	/* Receive Pointer Register */
@@ -692,11 +692,15 @@ typedef struct _AT91S_PDC
 #define AT91C_PIO_PA7		((unsigned int) 1 <<  7)	/* Pin Controlled by PA7 */
 #define AT91C_PA7_ETXCK_EREFCK	((unsigned int) AT91C_PIO_PA7)	/* Ethernet MAC Transmit Clock/Reference Clock */
 
+#define AT91C_PIO_PB0		((unsigned int) 1 <<  0)	/* Pin Controlled by PB3 */
+#define AT91C_PIO_PB1		((unsigned int) 1 <<  1)	/* Pin Controlled by PB3 */
+#define AT91C_PIO_PB2		((unsigned int) 1 <<  2)	/* Pin Controlled by PB3 */
 #define AT91C_PIO_PB3		((unsigned int) 1 <<  3)	/* Pin Controlled by PB3 */
 #define AT91C_PIO_PB4		((unsigned int) 1 <<  4)	/* Pin Controlled by PB4 */
 #define AT91C_PIO_PB5		((unsigned int) 1 <<  5)	/* Pin Controlled by PB5 */
 #define AT91C_PIO_PB6		((unsigned int) 1 <<  6)	/* Pin Controlled by PB6 */
 #define AT91C_PIO_PB7		((unsigned int) 1 <<  7)	/* Pin Controlled by PB7 */
+#define AT91C_PIO_PB22		((unsigned int) 1 << 22) 	/* Pin Controlled by PB22 */
 #define AT91C_PIO_PB25		((unsigned int) 1 << 25)	/* Pin Controlled by PB25 */
 #define AT91C_PB25_DSR1		((unsigned int) AT91C_PIO_PB25)	/* USART 1 Data Set ready */
 #define AT91C_PB25_EF100	((unsigned int) AT91C_PIO_PB25)	/* Ethernet MAC Force 100 Mbits */
@@ -737,19 +741,36 @@ typedef struct _AT91S_PDC
 #define AT91C_PIOC_CODR		((AT91_REG *)	0xFFFFF834) /* (PIOC) Clear Output Data Register */
 #define AT91C_PIOC_PDSR		((AT91_REG *)	0xFFFFF83C) /* (PIOC) Pin Data Status Register */
 
-#define AT91C_BASE_SPI		((AT91PS_SPI)	0xFFFE0000) /* (SPI) Base Address */
-#define AT91C_BASE_EMAC		((AT91PS_EMAC)	0xFFFBC000) /* (EMAC) Base Address */
+#define AT91C_BASE_AIC		((AT91PS_AIC)	0xFFFFF000) /* (AIC) Base Address */
+#define AT91C_BASE_DBGU		((AT91PS_DBGU)	0xFFFFF200) /* (DBGU) Base Address */
+#define AT91C_BASE_PIOA		((AT91PS_PIO)	0xFFFFF400) /* (PIOA) Base Address */
+#define AT91C_BASE_PIOB		((AT91PS_PIO)	0xFFFFF600) /* (PIOB) Base Address */
+#define AT91C_BASE_PIOC		((AT91PS_PIO)	0xFFFFF800) /* (PIOC) Base Address */
+#define AT91C_BASE_PIOD		((AT91PS_PIO)	0xFFFFFA00) /* (PIOC) Base Address */
 #define AT91C_BASE_PMC		((AT91PS_PMC)	0xFFFFFC00) /* (PMC) Base Address */
+#if	0
+#define AT91C_BASE_ST		((AT91PS_ST)	0xFFFFFD00) /* (PMC) Base Address */
+#define AT91C_BASE_RTC		((AT91PS_RTC)	0xFFFFFE00) /* (PMC) Base Address */
+#define AT91C_BASE_MC		((AT91PS_MC)	0xFFFFFF00) /* (PMC) Base Address */
+#endif
+
 #define AT91C_BASE_TC0		((AT91PS_TC)	0xFFFA0000) /* (TC0) Base Address */
-#define AT91C_BASE_DBGU		((AT91PS_DBGU)	0xFFFFF200) /* (DBGU) Base Address */
+#define AT91C_BASE_TC1		((AT91PS_TC)	0xFFFA4000) /* (TC0) Base Address */
+#if	0
+#define AT91C_BASE_UDP		((AT91PS_UDP)	0xFFFB0000) /* (TC0) Base Address */
+#define AT91C_BASE_MCI		((AT91PS_MCI)	0xFFFB4000) /* (TC0) Base Address */
+#define AT91C_BASE_TWI		((AT91PS_TWI)	0xFFFB8000) /* (TC0) Base Address */
+#endif
+#define AT91C_BASE_EMAC		((AT91PS_EMAC)	0xFFFBC000) /* (EMAC) Base Address */
+#define AT91C_BASE_US0		((AT91PS_USART)	0xFFFC0000) /* (US0) Base Address */
+#define AT91C_BASE_US1		((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
+#define AT91C_BASE_US2		((AT91PS_USART) 0xFFFC8000) /* (US1) Base Address */
+#define AT91C_BASE_US3		((AT91PS_USART) 0xFFFCC000) /* (US1) Base Address */
+#define AT91C_BASE_SPI		((AT91PS_SPI)	0xFFFE0000) /* (SPI) Base Address */
+
 #define AT91C_BASE_CKGR		((AT91PS_CKGR)	0xFFFFFC20) /* (CKGR) Base Address */
-#define AT91C_BASE_PIOC		((AT91PS_PIO)	0xFFFFF800) /* (PIOC) Base Address */
-#define AT91C_BASE_PIOB		((AT91PS_PIO)	0xFFFFF600) /* (PIOB) Base Address */
-#define AT91C_BASE_PIOA		((AT91PS_PIO)	0xFFFFF400) /* (PIOA) Base Address */
 #define AT91C_EBI_CSA		((AT91_REG *)	0xFFFFFF60) /* (EBI) Chip Select Assignment Register */
 #define AT91C_BASE_SMC2		((AT91PS_SMC2)	0xFFFFFF70) /* (SMC2) Base Address */
-#define AT91C_BASE_US0		((AT91PS_USART)	0xFFFC0000) /* (US0) Base Address */
-#define AT91C_BASE_US1		((AT91PS_USART) 0xFFFC4000) /* (US1) Base Address */
 #define AT91C_TCB0_BMR		((AT91_REG *)	0xFFFA00C4) /* (TCB0) TC Block Mode Register */
 #define AT91C_TCB0_BCR		((AT91_REG *)	0xFFFA00C0) /* (TCB0) TC Block Control Register */
 #define AT91C_PIOC_PDR		((AT91_REG *)	0xFFFFF804) /* (PIOC) PIO Disable Register */

include/asm-arm/mach-types.h

@@ -736,7 +736,11 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_LN2410SBC            725
 #define MACH_TYPE_CB3RUFC              726
 #define MACH_TYPE_MP2USB               727
+#define MACH_TYPE_AT91SAM9261EK        848
 #define MACH_TYPE_PDNB3               1002
+#define MACH_TYPE_AT91SAM9260EK       1099
+#define MACH_TYPE_AT91RM9200DF        1119
+#define MACH_TYPE_AT91SAM9263EK       1202
 
 #ifdef CONFIG_ARCH_EBSA110
 # ifdef machine_arch_type
@@ -9402,6 +9406,71 @@ extern unsigned int __machine_arch_type;
 # define machine_is_mp2usb()	(0)
 #endif
 
+#ifdef CONFIG_MACH_AT91SAM9261EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9261EK
+# endif
+# define machine_is_at91sam9261ek()	\
+		(machine_arch_type == MACH_TYPE_AT91SAM9261EK)
+#else
+# define machine_is_at91sam9261ek()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9260EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9260EK
+# endif
+# define machine_is_at91sam9260ek()	\
+		(machine_arch_type == MACH_TYPE_AT91SAM9260EK)
+#else
+# define machine_is_at91sam9260ek()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9263EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9263EK
+# endif
+# define machine_is_at91sam9263ek()	\
+	(machine_arch_type == MACH_TYPE_AT91SAM9263EK)
+#else
+# define machine_is_at91sam9263ek()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91RM9200DF
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91RM9200DF
+# endif
+# define machine_is_at91rm9200df()	\
+	(machine_arch_type == MACH_TYPE_AT91RM9200DF)
+#else
+# define machine_is_at91rm9200df()	(0)
+#endif
+
+#ifdef CONFIG_MACH_AT91SAM9263EK
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_AT91SAM9263EK
+# endif
+# define machine_is_at91sam9263ek()	\
+	(machine_arch_type == MACH_TYPE_AT91SAM9263EK)
+#else
+# define machine_is_at91sam9263ek()	(0)
+#endif
+
 /*
  * These have not yet been registered
  */

include/at45.h

@@ -0,0 +1,69 @@
+
+#ifndef	_AT45_H_
+#define	_AT45_H_
+#ifdef	DATAFLASH_MMC_SELECT
+extern	void AT91F_SelectMMC(void);
+extern	void AT91F_SelectSPI(void);
+extern	int AT91F_GetMuxStatus(void);
+#endif
+extern	void AT91F_SpiInit(void);
+extern	void AT91F_SpiEnable(int cs);
+extern	unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc );
+extern	AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+		AT91PS_DataFlash pDataFlash,
+		unsigned char OpCode,
+		unsigned int CmdSize,
+		unsigned int DataflashAddress);
+extern	AT91S_DataFlashStatus AT91F_DataFlashGetStatus (
+	AT91PS_DataflashDesc pDesc);
+extern	AT91S_DataFlashStatus AT91F_DataFlashWaitReady (
+	AT91PS_DataflashDesc pDataFlashDesc, 
+	unsigned int timeout);
+extern	AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
+	AT91PS_DataFlash pDataFlash,
+	int src,
+	unsigned char *dataBuffer,
+	int sizeToRead );
+extern	AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int SizeToWrite);
+extern	AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int page);
+extern	AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned char *dataBuffer,
+	unsigned int bufferAddress,
+	int SizeToWrite );
+extern	AT91S_DataFlashStatus AT91F_PageErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int page);
+extern	AT91S_DataFlashStatus AT91F_BlockErase(
+	AT91PS_DataFlash pDataFlash,
+	unsigned int block);
+extern	AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char BufferCommand,
+	unsigned int dest );
+extern	AT91S_DataFlashStatus AT91F_PartialPageWrite (
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	unsigned int dest,
+	unsigned int size);
+extern	AT91S_DataFlashStatus AT91F_DataFlashWrite(
+	AT91PS_DataFlash pDataFlash,
+	unsigned char *src,
+	int dest,
+	int size );
+extern	int AT91F_DataFlashRead(
+	AT91PS_DataFlash pDataFlash,
+	unsigned long addr,
+	unsigned long size,
+	char *buffer);
+extern	int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc);
+
+#endif

include/config_cmd_all.h

@@ -76,5 +76,6 @@
 #define CONFIG_CMD_USB		/* USB Support			*/
 #define CONFIG_CMD_VFD		/* VFD support (TRAB)		*/
 #define CONFIG_CMD_XIMG		/* Load part of Multi Image	*/
+#define CONFIG_CMD_MUX		/* AT91 MMC/SPI Mux Support     */
 
 #endif	/* _CONFIG_CMD_ALL_H */

include/configs/at91rm9200dk.h

@@ -163,6 +163,11 @@
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_AT91C_USE_RMII
 
+/* AC Characteristics */
+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
+#define DATAFLASH_TCSS	(0xC << 16)
+#define DATAFLASH_TCHS	(0x1 << 24)
+
 #define CONFIG_HAS_DATAFLASH		1
 #define CFG_SPI_WRITE_TOUT		(5*CFG_HZ)
 #define CFG_MAX_DATAFLASH_BANKS 	2

include/dataflash.h

@@ -38,13 +38,47 @@
 #include "config.h"
 
 /*number of protected area*/
-#define NB_DATAFLASH_AREA	4
+#ifdef	CONFIG_NEW_PARTITION
+# define NB_DATAFLASH_AREA	6
+#else
+# define NB_DATAFLASH_AREA	4
+#endif
+
+#ifdef CFG_NO_FLASH
+
+/*-----------------------------------------------------------------------
+ * return codes from flash_write():
+ */
+# define ERR_OK				0
+# define ERR_TIMOUT			1
+# define ERR_NOT_ERASED			2
+# define ERR_PROTECTED			4
+# define ERR_INVAL			8
+# define ERR_ALIGN			16
+# define ERR_UNKNOWN_FLASH_VENDOR	32
+# define ERR_UNKNOWN_FLASH_TYPE		64
+# define ERR_PROG_ERROR			128
+
+/*-----------------------------------------------------------------------
+ * Protection Flags for flash_protect():
+ */
+# define FLAG_PROTECT_SET		0x01
+# define FLAG_PROTECT_CLEAR		0x02
+# define FLAG_PROTECT_INVALID		0x03
+
+/*-----------------------------------------------------------------------
+ * Set Environment according to label:
+ */
+# define	FLAG_SETENV		0x80
+#endif /* CFG_NO_FLASH */
 
 /*define the area structure*/
 typedef struct {
 	unsigned long start;
 	unsigned long end;
 	unsigned char protected;
+	unsigned char setenv;
+	unsigned char label[20];	
 } dataflash_protect_t;
 
 typedef unsigned int AT91S_DataFlashStatus;
@@ -96,6 +130,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
 	AT91S_DataflashDesc Desc;
 	AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */
 	unsigned long logical_address;
+	unsigned long end_address;
 	unsigned int id;			/* device id */
 } AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO;
 
@@ -106,6 +141,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
 #define AT45DB321	0x34
 #define AT45DB642	0x3c
 #define AT45DB128	0x10
+#define	PAGES_PER_BLOCK	8
 
 #define AT91C_DATAFLASH_TIMEOUT		10000	/* For AT91F_DataFlashWaitReady */
 
@@ -168,6 +204,7 @@ typedef struct _AT91S_DATAFLASH_INFO {
 
 extern int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, unsigned long size);
 extern int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr);
+extern int addr2ram(ulong addr);
 extern int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr);
 extern int addr_dataflash (unsigned long addr);
 extern int read_dataflash (unsigned long addr, unsigned long size, char *result);
@@ -175,4 +212,8 @@ extern int write_dataflash (unsigned long addr, unsigned long dest, unsigned lon
 extern void dataflash_print_info (void);
 extern void dataflash_perror (int err);
 
+#ifdef	CONFIG_NEW_DF_PARTITION
+extern int AT91F_DataflashSetEnv (void); #endif
+#endif
+
 #endif

include/dm9161.h

@@ -43,9 +43,9 @@
 #define DM9161_COLLISION_TEST    (1 << 7)
 
 /*--Bit definitions: DM9161_BMSR */
-#define DM9161_100BASE_T4        (1 << 15)
+#define DM9161_100BASE_TX        (1 << 15)
 #define DM9161_100BASE_TX_FD     (1 << 14)
-#define DM9161_100BASE_T4_HD     (1 << 13)
+#define DM9161_100BASE_TX_HD     (1 << 13)
 #define DM9161_10BASE_T_FD       (1 << 12)
 #define DM9161_10BASE_T_HD       (1 << 11)
 #define DM9161_MF_PREAMB_SUPPR   (1 << 6)

include/flash.h

@@ -119,6 +119,11 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of
  */
 #define FLAG_PROTECT_SET	0x01
 #define FLAG_PROTECT_CLEAR	0x02
+#define	FLAG_PROTECT_INVALID	0x03
+/*-----------------------------------------------------------------------
+ * Set Environment according to label:
+ */
+#define	FLAG_SETENV		0x80
 
 /*-----------------------------------------------------------------------
  * Device IDs

include/led.h

@@ -0,0 +1,46 @@
+/*
+ * (C) Copyright 2006
+ * Atmel Nordic AB <www.atmel.com>
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+ #ifndef __LED_H
+#define __LED_H
+
+#ifndef	__ASSEMBLY__
+extern void	LED_init (void);
+extern void	red_LED_on(void);
+extern void	red_LED_off(void);
+extern void	green_LED_on(void);
+extern void	green_LED_off(void);
+extern void	yellow_LED_on(void);
+extern void	yellow_LED_off(void);
+#else
+	.extern LED_init
+	.extern red_LED_on
+	.extern red_LED_off
+	.extern yellow_LED_on
+	.extern yellow_LED_off
+	.extern green_LED_on
+	.extern green_LED_off
+#endif
+#endif
+