Reduce line lengths to 80 characters max.

board/siemens/SMN42/flash.c

@@ -25,7 +25,8 @@
 #include <asm/byteorder.h>
 #include <asm/arch/hardware.h>
 
-static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
+static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] 
+						= CFG_FLASH_BANKS_LIST;
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
 extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);

disk/part.c

@@ -220,7 +220,8 @@ void init_part (block_dev_desc_t * dev_desc)
 }
 
 
-int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
+int get_partition_info (block_dev_desc_t *dev_desc, int part
+					, disk_partition_t *info)
 {
 		switch (dev_desc->part_type) {
 #ifdef CONFIG_MAC_PARTITION
@@ -326,7 +327,8 @@ void print_part (block_dev_desc_t * dev_desc)
 
 
 #else	/* neither MAC nor DOS nor ISO partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured!
+# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION 
+# error nor CONFIG_ISO_PARTITION configured!
 #endif
 
 #endif	/* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */

drivers/enc28j60.c

@@ -548,7 +548,10 @@ static void encRx (void)
 		m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
 
 		/* taken from the Linux driver */
-		/* Only odd values should be written to ERXRDPTL, see errata B4 pt.13 */		rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+		/* Only odd values should be written to ERXRDPTL, 
+		 * see errata B4 pt.13 
+		 */
+		rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
 		if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
 				m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
 				(m_nic_read(CTL_REG_ERXNDH) << 8 |
@@ -799,13 +802,15 @@ static void encInit (unsigned char *pEthAddr)
 
 	/* enable MAC to receive frames */
 	/* added some bits from the Linux driver */
-	m_nic_write_retry (CTL_REG_MACON1, (ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS), 10);
+	m_nic_write_retry (CTL_REG_MACON1
+		,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+		,10);
 
 	/* configure pad, tx-crc and duplex */
 	/* added a bit from the Linux driver */
-	m_nic_write_retry (CTL_REG_MACON3,
-			   (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN),
-			   10);
+	m_nic_write_retry (CTL_REG_MACON3
+		,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+		,10);
 
 	/* added 4 new lines from the Linux driver */
 	/* Allow infinite deferals if the medium is continously busy */

fs/fat/fat.c

@@ -59,7 +59,8 @@ int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr)
 	if (cur_dev == NULL)
 		return -1;
 	if (cur_dev->block_read) {
-		return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr);
+		return cur_dev->block_read (cur_dev->dev
+			, startblock, getsize, (unsigned long *)bufptr);
 	}
 	return -1;
 }
@@ -996,7 +997,8 @@ file_fat_detectfs(void)
 	memcpy (vol_label, volinfo.volume_label, 11);
 	vol_label[11] = '\0';
 	volinfo.fs_type[5]='\0';
-	printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label);
+	printf("Partition %d: Filesystem: %s \"%s\"\n"
+			,cur_part,volinfo.fs_type,vol_label);
 	return 0;
 }
 

include/configs/SMN42.h

@@ -134,7 +134,8 @@
 
 #undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x81000000	/* default load address	for uClinux img is here*/
+#define	CFG_LOAD_ADDR		0x81000000	/* default load address	
+                                                 * for uClinux img is here*/
 
 #define CFG_SYS_CLK_FREQ        58982400        /* Hz */
 #define	CFG_HZ			2048		/* decrementer freq in Hz */

include/configs/lpc2292sodimm.h

@@ -101,7 +101,9 @@
 
 #undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for armadillo: kernel img is here*/
+#define	CFG_LOAD_ADDR		0x00040000	/* default load address	for 
+                                                 * armadillo: kernel img is here
+						 */
 
 #define CFG_SYS_CLK_FREQ        58982400        /* Hz */
 #define	CFG_HZ			2048		/* decrementer freq in Hz */