powerpc/mpc85xx: Add revision properties in portal device tree node 'pme'

The 'fsl,pme-rev1' and 'fsl-pme-rev2' properties have been added to the
pme portal node. This is required for software to determine which version
of PME hardware is present and take appropriate actions.
These properties are a direct reflection of the corresponding ccsr pme
register value.

Also removed unnecessary static global variables.

Signed-off-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

arch/powerpc/cpu/mpc85xx/portals.c

@@ -30,11 +30,9 @@
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 
-static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
-static ccsr_bman_t *bman = (void *)CONFIG_SYS_FSL_BMAN_ADDR;
-
 void setup_portals(void)
 {
+	ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
 #ifdef CONFIG_FSL_CORENET
 	int i;
 
@@ -166,6 +164,20 @@ static int fdt_qportal(void *blob, int off, int id, char *name,
 			num = get_dpaa_liodn(dev, &liodns[0], id);
 			ret = fdt_setprop(blob, childoff, "fsl,liodn",
 					  &liodns[0], sizeof(u32) * num);
+			if (!strncmp(name, "pme", 3)) {
+				u32 pme_rev1, pme_rev2;
+				ccsr_pme_t *pme_regs =
+					(void *)CONFIG_SYS_FSL_CORENET_PME_ADDR;
+
+				pme_rev1 = in_be32(&pme_regs->pm_ip_rev_1);
+				pme_rev2 = in_be32(&pme_regs->pm_ip_rev_2);
+				ret = fdt_setprop(blob, childoff,
+					"fsl,pme-rev1", &pme_rev1, sizeof(u32));
+				if (ret < 0)
+					return ret;
+				ret = fdt_setprop(blob, childoff,
+					"fsl,pme-rev2", &pme_rev2, sizeof(u32));
+			}
 #endif
 		} else {
 			return childoff;
@@ -183,6 +195,7 @@ void fdt_fixup_qportals(void *blob)
 	int off, err;
 	unsigned int maj, min;
 	unsigned int ip_cfg;
+	ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
 	u32 rev_1 = in_be32(&qman->ip_rev_1);
 	u32 rev_2 = in_be32(&qman->ip_rev_2);
 	char compat[64];
@@ -272,6 +285,7 @@ void fdt_fixup_bportals(void *blob)
 	int off, err;
 	unsigned int maj, min;
 	unsigned int ip_cfg;
+	ccsr_bman_t *bman = (void *)CONFIG_SYS_FSL_BMAN_ADDR;
 	u32 rev_1 = in_be32(&bman->ip_rev_1);
 	u32 rev_2 = in_be32(&bman->ip_rev_2);
 	char compat[64];