ARM: remove broken "cmc_pu2" board

Signed-off-by: Wolfgang Denk <wd@denx.de>

board/cmc_pu2/Makefile

@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= cmc_pu2.o flash.o load_sernum_ethaddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################

board/cmc_pu2/cmc_pu2.c

@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn
- * (2004) garyj@denx.de
- *
- * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mach-types.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-#define CMC_HP_BASIC	1
-#define CMC_PU2		2
-#define CMC_BASIC	4
-
-int hw_detect (void);
-
-int board_init (void)
-{
-	AT91PS_PIO piob = AT91C_BASE_PIOB;
-	AT91PS_PIO pioc = AT91C_BASE_PIOC;
-
-	/* Enable Ctrlc */
-	console_init_f ();
-
-	/* Correct IRDA resistor problem */
-	/* Set PA23_TXD in Output */
-	/* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */
-
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	/* PIOB and PIOC clock enabling */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
-	/*
-	 * configure PC0-PC3 as input without pull ups, so RS485 driver enable
-	 * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated.
-	 */
-	pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
-			AT91C_PIO_PC2 | AT91C_PIO_PC3;
-	pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
-			AT91C_PIO_PC2 | AT91C_PIO_PC3;
-	pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
-			AT91C_PIO_PC2 | AT91C_PIO_PC3;
-
-	/*
-	 * On CMC-PU2 board configure PB3-PB6 to input without pull ups to
-	 * clear the duo LEDs (the external pull downs assure a proper
-	 * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and
-	 * drive it high, to configure current measurement on AINx.
-	 */
-	if (hw_detect() & CMC_PU2) {
-		piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
-				AT91C_PIO_PB5 | AT91C_PIO_PB6;
-	}
-	else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) {
-		piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
-				AT91C_PIO_PB5 | AT91C_PIO_PB6;
-		piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
-				AT91C_PIO_PB5 | AT91C_PIO_PB6;
-	}
-	piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
-			AT91C_PIO_PB5 | AT91C_PIO_PB6;
-	piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
-			AT91C_PIO_PB5 | AT91C_PIO_PB6;
-
-	/*
-	 * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in
-	 * the linuxarm kernel, yet.
-	 */
-	/* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */
-	gd->bd->bi_arch_number = 251;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	return 0;
-}
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-	return 0;
-}
-
-int checkboard (void)
-{
-	if (hw_detect() & CMC_PU2)
-		puts ("Board: CMC-PU2 (Rittal GmbH)\n");
-	else if (hw_detect() & CMC_BASIC)
-		puts ("Board: CMC-BASIC (Rittal GmbH)\n");
-	else if (hw_detect() & CMC_HP_BASIC)
-		puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n");
-	else
-		puts ("Board: unknown\n");
-	return 0;
-}
-
-int hw_detect (void)
-{
-	AT91PS_PIO pio = AT91C_BASE_PIOB;
-
-	/* PIOB clock enabling */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-
-	/* configure PB12 as input without pull up */
-	pio->PIO_ODR = AT91C_PIO_PB12;
-	pio->PIO_PPUDR = AT91C_PIO_PB12;
-	pio->PIO_PER = AT91C_PIO_PB12;
-
-	/* configure PB13 as input without pull up */
-	pio->PIO_ODR = AT91C_PIO_PB13;
-	pio->PIO_PPUDR = AT91C_PIO_PB13;
-	pio->PIO_PER = AT91C_PIO_PB13;
-
-	/* read board identification pin */
-	if (pio->PIO_PDSR & AT91C_PIO_PB12)
-		return ((pio->PIO_PDSR & AT91C_PIO_PB13)
-			? CMC_PU2 : 0);
-	else
-		return ((pio->PIO_PDSR & AT91C_PIO_PB13)
-			? CMC_HP_BASIC : CMC_BASIC);
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	at91rm9200_GetPhyInterface
- * Description:
- *	Initialise the interface functions to the PHY
- * Arguments:
- *	None
- * Return value:
- *	None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
-	p_phyops->Init = dm9161_InitPhy;
-	p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
-	p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
-	p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif	/* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-	rc = at91emac_register(bis, 0);
-	return rc;
-}
-#endif

board/cmc_pu2/config.mk

@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x20F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000

board/cmc_pu2/flash.c

@@ -1,469 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn
- * garyj@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef	CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define FLASH_CYCLE1	0x0555
-#define FLASH_CYCLE2	0x02AA
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_short *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
-	/* Init: no FLASHes known */
-	memset(&flash_info[0], 0, sizeof(flash_info_t));
-
-	flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]);
-
-	size = flash_info[0].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-		      flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	vu_short *base = (vu_short *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = 0x00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = 0x00F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	info = NULL;
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size && info->start[0] <= base &&
-		    base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_S29GL064M:
-		printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (vu_short *addr, flash_info_t *info)
-{
-	int i;
-	ushort value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command sequence */
-	addr[FLASH_CYCLE1] = 0x00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = 0x0055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = 0x0090;	/* selects Intel or AMD */
-
-	/* read Manufacturer ID */
-	udelay(100);
-	value = addr[0];
-	debug ("Manufacturer ID: %04X\n", value);
-
-	switch (value) {
-
-	case (AMD_MANUFACT & 0xFFFF):
-		debug ("Manufacturer: AMD (Spansion)\n");
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (INTEL_MANUFACT & 0xFFFF):
-		debug ("Manufacturer: Intel (not supported yet)\n");
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		printf ("Unknown Manufacturer ID: %04X\n", value);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		goto out;
-	}
-
-	value = addr[1];
-	debug ("Device ID: %04X\n", value);
-
-	switch (addr[1]) {
-
-	case (AMD_ID_MIRROR & 0xFFFF):
-		debug ("Mirror Bit flash: addr[14] = %08X  addr[15] = %08X\n",
-			addr[14], addr[15]);
-
-		switch(addr[14]) {
-		case (AMD_ID_GL064M_2 & 0xFFFF):
-			if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) {
-				printf ("Chip: S29GLxxxM -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-				info->sector_count = 0;
-				info->size = 0;
-			} else {
-				debug ("Chip: S29GL064M-R6\n");
-				info->flash_id += FLASH_S29GL064M;
-				info->sector_count = 128;
-				info->size = 0x00800000;
-				for (i = 0; i < info->sector_count; i++) {
-					info->start[i] = base;
-					base += 0x10000;
-				}
-			}
-			break;	/* => 16 MB	*/
-		default:
-			printf ("Chip: *** unknown ***\n");
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			break;
-		}
-		break;
-
-	default:
-		printf ("Unknown Device ID: %04X\n", value);
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-out:
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_short *addr = (vu_short *)(info->start[0]);
-	int flag, prot, sect, ssect, l_sect;
-	ulong now, last, start;
-
-	debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/*
-	 * Start erase on unprotected sectors.
-	 * Since the flash can erase multiple sectors with one command
-	 * we take advantage of that by doing the erase in chunks of
-	 * 3 sectors.
-	 */
-	for (sect = s_first; sect <= s_last; ) {
-		l_sect = -1;
-
-		addr[FLASH_CYCLE1] = 0x00AA;
-		addr[FLASH_CYCLE2] = 0x0055;
-		addr[FLASH_CYCLE1] = 0x0080;
-		addr[FLASH_CYCLE1] = 0x00AA;
-		addr[FLASH_CYCLE2] = 0x0055;
-
-		/* do the erase in chunks of at most 3 sectors */
-		for (ssect = 0; ssect < 3; ssect++) {
-			if ((sect + ssect) > s_last)
-				break;
-			if (info->protect[sect + ssect] == 0) {	/* not protected */
-				addr = (vu_short *)(info->start[sect + ssect]);
-				addr[0] = 0x0030;
-				l_sect = sect + ssect;
-			}
-		}
-		/* wait at least 80us - let's wait 1 ms */
-		udelay (1000);
-
-		/*
-		 * We wait for the last triggered sector
-		 */
-		if (l_sect < 0)
-			goto DONE;
-
-		start = get_timer(0);
-		last  = 0;
-		addr = (vu_short *)(info->start[l_sect]);
-		while ((addr[0] & 0x0080) != 0x0080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-				return 1;
-			}
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc ('.');
-				last = now;
-			}
-		}
-		addr = (vu_short *)info->start[0];
-		addr[0] = 0x00F0;	/* reset bank */
-		sect += ssect;
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_short *)info->start[0];
-	addr[0] = 0x00F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	};
-
-	if ((int) src & 1) {
-		printf ("unaligned source not supported\n");
-		return ERR_ALIGN;
-	};
-
-	wp = addr;
-
-	while (cnt >= 2) {
-		data = *((vu_short *)src);
-		if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 0) {
-		return (ERR_OK);
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
-		if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
-{
-	int flag;
-	vu_short *base;		/* first address in flash bank	*/
-	ulong start;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	base = (vu_short *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = 0x00AA;	/* unlock */
-	base[FLASH_CYCLE2] = 0x0055;	/* unlock */
-	base[FLASH_CYCLE1] = 0x00A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer(0);
-
-	/* data polling for D7 */
-	while ((*dest & 0x0080) != (data & 0x0080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*dest = 0x00F0;	/* reset bank */
-			return (1);
-		}
-	}
-	return (0);
-}

board/cmc_pu2/load_sernum_ethaddr.c

@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <net.h>
-
-#define I2C_CHIP	0x50	/* I2C bus address of onboard EEPROM */
-#define I2C_ALEN	1	/* length of EEPROM addresses in bytes */
-#define I2C_OFFSET	0x0	/* start address of manufacturere data block
-				 * in EEPROM */
-
-/* 64 Byte manufacturer data block in EEPROM */
-struct manufacturer_data {
-	unsigned int	serial_number;	/* serial number (0...999999) */
-	unsigned short	hardware;	/* hardware version (e.g. V1.02) */
-	unsigned short	manuf_date;	/* manufacture date (e.g. 25/02) */
-	unsigned char	name[20];	/* device name (in CHIP.INI) */
-	unsigned char	macadr[6];	/* MAC address */
-	signed char	a_kal[4];	/* calibration value for U */
-	signed char	i_kal[4];	/* calibration value for I */
-	unsigned char	reserve[18];	/* reserved */
-	unsigned short	save_nr;	/* save count */
-	unsigned short	chksum;		/* checksum */
-};
-
-
-int i2c_read (unsigned char chip, unsigned int addr, int alen,
-	      unsigned char *buffer, int len);
-
-/*-----------------------------------------------------------------------
- * Process manufacturer data block in EEPROM:
- *
- * If we boot on a system fresh from factory, check if the manufacturer data
- * in the EEPROM is valid and save some information it contains.
- *
- * CMC manufacturer data is defined as follows:
- *
- * - located in the onboard EEPROM
- * - starts at offset 0x0
- * - size 0x00000040
- *
- * Internal structure: see struct definition
- */
-
-int misc_init_r(void)
-{
-	struct manufacturer_data data;
-	char  serial [9];
-	unsigned short chksum;
-	unsigned char *p;
-	unsigned short i;
-
-#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C)
-#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C)
-#endif
-	if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data,
-		     sizeof(data)) != 0) {
-		puts ("Error reading manufacturer data from EEPROM\n");
-		return -1;
-	}
-
-	/* check if manufacturer data block is valid  */
-	p = (unsigned char *)&data;
-	chksum = 0;
-	for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++)
-		chksum += *p++;
-
-	debug ("checksum of manufacturer data block: %#.4x\n", chksum);
-
-	if (chksum != data.chksum) {
-		puts ("Error: manufacturer data block has invalid checksum\n");
-		return -1;
-	}
-
-	/* copy serial number */
-	sprintf (serial, "%d", data.serial_number);
-
-	/* set serial# and ethaddr if not yet defined */
-	if (getenv("serial#") == NULL) {
-		setenv ("serial#", serial);
-	}
-
-	if (getenv("ethaddr") == NULL) {
-		eth_setenv_enetaddr("ethaddr", data.macadr);
-	}
-
-	return 0;
-}

boards.cfg

@@ -57,7 +57,6 @@ at91rm9200ek_ram             arm         arm920t     at91rm9200ek        atmel
 eb_cpux9k2                   arm         arm920t     -                   BuS            at91
 cpuat91                      arm         arm920t     cpuat91             eukrea         at91        cpuat91
 cpuat91_ram                  arm         arm920t     cpuat91             eukrea         at91        cpuat91:RAMBOOT
-cmc_pu2                      arm         arm920t     -                   -              at91rm9200
 csb637                       arm         arm920t     -                   -              at91rm9200
 kb9202                       arm         arm920t     -                   -              at91rm9200
 m501sk                       arm         arm920t     -                   -              at91rm9200

doc/README.scrapyard

@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
+cmc_pu2	arm	arm920t	-	  2011-07-17
 at91cap9adk arm	arm926ejs -	  2011-07-17	Stelian Pop <stelian.pop@leadtechdesign.com>
 voiceblue arm	arm925t	-	  2011-07-17
 smdk2400 arm	arm920t	-	  2011-07-17	Gary Jennejohn <garyj@denx.de>

include/configs/cmc_pu2.h

@@ -1,238 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Configuration settings for the CMC PU2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK	179712000	/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK/3)	/* peripheral clock */
-
-#define AT91_SLOW_CLOCK		32768	/* slow clock */
-
-#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
-#define CONFIG_AT91RM9200	1	/* It's an Atmel AT91RM9200 SoC	*/
-#define CONFIG_CMC_PU2		1	/* on an CMC_PU2 Board		*/
-#undef  CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
-#define USE_920T_MMU		1
-
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR		1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL	0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL	0x100032ad /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL	0x2026BE04 /* 179,712 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL	0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL	0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL	0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL	0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL	0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL	0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL	0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM	0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1	0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL	0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL	0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1	0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2	0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3	0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL	0x000002E0 /* Write refresh rate */
-#endif	/* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE		9600
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0  or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#undef CONFIG_DBGU
-#define CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef	CONFIG_HWFLOW			/* don't include RTS/CTS flow control support	*/
-
-#undef	CONFIG_MODEM_SUPPORT		/* disable modem initialization stuff */
-
-#define CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		0	/* not used */
-#define CONFIG_SYS_I2C_SLAVE		0	/* not used */
-#define CONFIG_RTC_RS5C372A		/* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#else
-#define CONFIG_TIMESTAMP
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY      1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-#if defined(CONFIG_HARD_I2C)
-    #define CONFIG_CMD_DATE
-    #define CONFIG_CMD_EEPROM
-    #define CONFIG_CMD_I2C
-#endif
-
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP
-
-#define AT91_SMART_MEDIA_ALE	(1 << 22)	/* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE	(1 << 21)	/* our CLE is AD21 */
-
-#define CONFIG_NR_DRAM_BANKS	1
-#define PHYS_SDRAM		0x20000000
-#define PHYS_SDRAM_SIZE		0x1000000	/* 16 megs */
-
-#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI		1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC		1
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#else
-#define CONFIG_DRIVER_ETHER		1
-#endif
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_AT91C_USE_RMII
-
-#define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES		16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* Logical adress for CS3 */
-
-#define PHYS_FLASH_1			0x10000000
-#define PHYS_FLASH_SIZE			0x800000  /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS		1
-#define CONFIG_SYS_MAX_FLASH_SECT		256
-#define CONFIG_SYS_FLASH_ERASE_TOUT		(11 * CONFIG_SYS_HZ)	/* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT		( 2 * CONFIG_SYS_HZ)	/* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_OFFSET			0x20000		/* after u-boot.bin */
-#define CONFIG_ENV_SECT_SIZE		(64 << 10)	/* sectors are 64 kB */
-#define CONFIG_ENV_SIZE			(16 << 10)	/* Use only 16 kB */
-
-#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		32		/* max number of command args */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2)	/* AT91C_TC0_CMR is implicitly set to */
-						/* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS	\
-	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
-		"addmtd;bootm\0" \
-	"nfsargs=setenv bootargs root=/dev/nfs rw " \
-		"nfsroot=${serverip}:${rootpath}\0" \
-	"net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
-		"addcons addmtd; bootm\0" \
-	"flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
-	"flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
-	"addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
-		"${hostname}::off\0" \
-	"addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
-	"addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
-		"64k(environment),768k(linux),4096k(root),-\0" \
-	"load=tftp ${loadaddr} ${loadfile}\0" \
-	"update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
-		"cp.b ${loadaddr} 10000000 ${filesize};" \
-		"protect on 10000000 1001ffff\0" \
-	"updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
-		"cp.b ${loadaddr} 10030000 ${filesize}\0" \
-	"updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
-		"cp.b ${loadaddr} 100f0000 ${filesize}\0" \
-	"updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
-		"cp.b ${loadaddr} 104f0000 ${filesize}\0" \
-	"cramfsimage=cramfs_cmc-pu2.img\0" \
-	"jffsimage=jffs2_cmc-pu2.img\0" \
-	"loadfile=u-boot_cmc-pu2.bin\0" \
-	"bootfile=uImage_cmc-pu2\0" \
-	"loadaddr=0x20800000\0" \
-	"hostname=CMC-TC-PU2\0" \
-	"bootcmd=run dhcp_start;run flash_cramfs\0" \
-	"autoload=n\0" \
-	"dhcp_start=echo no DHCP\0" \
-	"ipaddr=192.168.0.190\0"
-#endif	/* __CONFIG_H */