|
|
@@ -0,0 +1,22 @@
|
|
|
+Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
|
|
|
+----------------------------------------------------------
|
|
|
+
|
|
|
+Low-power mode as described in Lite5200B User's Manual, means that
|
|
|
+with support of MC68HLC908QT1 microcontroller (refered to as QT),
|
|
|
+everything but the SDRAM can be powered down. This brings
|
|
|
+maximum power saving, while one can still restore previous state
|
|
|
+quickly.
|
|
|
+
|
|
|
+Quick overview where U-Boot comes into the picture:
|
|
|
+- OS saves device states
|
|
|
+- OS saves wakeup handler address to physical 0x0, puts SDRAM into
|
|
|
+ self-refresh and signals to QT, it should power down the board
|
|
|
+- / board is sleeping here /
|
|
|
+- someone presses SW4 (connected to QT)
|
|
|
+- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
|
|
|
+ so get SDRAM out of self-refresh and transfer control to OS
|
|
|
+ wakeup handler
|
|
|
+- OS restores device states
|
|
|
+
|
|
|
+This was tested on Linux with USB and Ethernet in use. Adding
|
|
|
+support for other devices is an OS issue.
|
Domen Puncer