mx23_olinuxino: Add support for status LED

This allow user to know if the bootloader is running, even without a
serial console.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>

board/olimex/mx23_olinuxino/mx23_olinuxino.c

@@ -28,6 +28,9 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sys_proto.h>
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -67,5 +70,9 @@ int board_init(void)
 	/* Adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+	status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE);
+#endif
+
 	return 0;
 }

board/olimex/mx23_olinuxino/spl_boot.c

@@ -84,6 +84,10 @@ const iomux_cfg_t iomux_setup[] = {
 	MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
 	MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
 
+	/* Green LED */
+	MX23_PAD_SSP1_DETECT__GPIO_2_1 |
+		(MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL),
+
 	/* MMC 0 */
 	MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
 	MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,

include/configs/mx23_olinuxino.h

@@ -19,6 +19,8 @@
 #ifndef __MX23_OLINUXINO_CONFIG_H__
 #define __MX23_OLINUXINO_CONFIG_H__
 
+#include <asm/arch/iomux-mx23.h>
+
 /*
  * SoC configurations
  */
@@ -56,6 +58,7 @@
 #define	CONFIG_CMD_EXT2
 #define	CONFIG_CMD_FAT
 #define	CONFIG_CMD_GPIO
+#define	CONFIG_CMD_LED
 #define	CONFIG_CMD_MMC
 
 /*
@@ -111,6 +114,17 @@
 #define	CONFIG_CONS_INDEX		0
 #define	CONFIG_BAUDRATE			115200	/* Default baud rate */
 
+/*
+ * Status LED
+ */
+#define	CONFIG_STATUS_LED
+#define	CONFIG_GPIO_LED
+#define	CONFIG_BOARD_SPECIFIC_LED
+#define	STATUS_LED_BOOT	0
+#define	STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
+#define	STATUS_LED_STATE	STATUS_LED_ON
+#define	STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
+
 /*
  * MMC Driver
  */