nand: mxc: Add support for i.MX5

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>

drivers/mtd/nand/mxc_nand.c

@@ -22,7 +22,8 @@
 #include <nand.h>
 #include <linux/err.h>
 #include <asm/io.h>
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX35) || \
+	defined(CONFIG_MX51) || defined(CONFIG_MX53)
 #include <asm/arch/imx-regs.h>
 #endif
 #include <fsl_nfc.h>
@@ -36,6 +37,9 @@ struct mxc_nand_host {
 	struct nand_chip		*nand;
 
 	struct fsl_nfc_regs __iomem	*regs;
+#ifdef MXC_NFC_V3_2
+	struct fsl_nfc_ip_regs __iomem	*ip_regs;
+#endif
 	int				spare_only;
 	int				status_request;
 	int				pagesize_2k;
@@ -77,7 +81,7 @@ static struct nand_ecclayout nand_hw_eccoob2k = {
 	.oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
 };
 #endif
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 #ifndef CONFIG_SYS_NAND_LARGEPAGE
 static struct nand_ecclayout nand_hw_eccoob = {
 	.eccbytes = 9,
@@ -127,10 +131,17 @@ static void wait_op_done(struct mxc_nand_host *host, int max_retries,
 	uint32_t tmp;
 
 	while (max_retries-- > 0) {
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 		tmp = readnfc(&host->regs->config2);
 		if (tmp & NFC_V1_V2_CONFIG2_INT) {
 			tmp &= ~NFC_V1_V2_CONFIG2_INT;
 			writenfc(tmp, &host->regs->config2);
+#elif defined(MXC_NFC_V3_2)
+		tmp = readnfc(&host->ip_regs->ipc);
+		if (tmp & NFC_V3_IPC_INT) {
+			tmp &= ~NFC_V3_IPC_INT;
+			writenfc(tmp, &host->ip_regs->ipc);
+#endif
 			break;
 		}
 		udelay(1);
@@ -182,7 +193,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 	if (spare_only)
 		MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
 
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
 		int i;
 		/*
 		 *  The controller copies the 64 bytes of spare data from
@@ -198,11 +209,18 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 		}
 	}
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+	writenfc(tmp, &host->regs->config1);
+#endif
 
 	/* Configure spare or page+spare access */
 	if (!host->pagesize_2k) {
-		uint16_t config1 = readnfc(&host->regs->config1);
+		uint32_t config1 = readnfc(&host->regs->config1);
 		if (spare_only)
 			config1 |= NFC_CONFIG1_SP_EN;
 		else
@@ -225,7 +243,14 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 {
 	MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(buf_id, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	tmp |= NFC_V3_CONFIG1_RBA(buf_id);
+	writenfc(tmp, &host->regs->config1);
+#endif
 
 	/* Configure spare or page+spare access */
 	if (!host->pagesize_2k) {
@@ -242,7 +267,7 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, spare_only);
 
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
 		int i;
 
 		/*
@@ -262,10 +287,16 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 /* Request the NANDFC to perform a read of the NAND device ID. */
 static void send_read_id(struct mxc_nand_host *host)
 {
-	uint16_t tmp;
+	uint32_t tmp;
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	/* NANDFC buffer 0 is used for device ID output */
 	writenfc(0x0, &host->regs->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	tmp = readnfc(&host->regs->config1);
+	tmp &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(tmp, &host->regs->config1);
+#endif
 
 	/* Read ID into main buffer */
 	tmp = readnfc(&host->regs->config1);
@@ -284,15 +315,19 @@ static void send_read_id(struct mxc_nand_host *host)
  */
 static uint16_t get_dev_status(struct mxc_nand_host *host)
 {
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	void __iomem *main_buf = host->regs->main_area[1];
 	uint32_t store;
-	uint16_t ret, tmp;
+#endif
+	uint32_t ret, tmp;
 	/* Issue status request to NAND device */
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	/* store the main area1 first word, later do recovery */
 	store = readl(main_buf);
 	/* NANDFC buffer 1 is used for device status */
 	writenfc(1, &host->regs->buf_addr);
+#endif
 
 	/* Read status into main buffer */
 	tmp = readnfc(&host->regs->config1);
@@ -304,12 +339,16 @@ static uint16_t get_dev_status(struct mxc_nand_host *host)
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, 0);
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	/*
 	 *  Status is placed in first word of main buffer
 	 * get status, then recovery area 1 data
 	 */
 	ret = readw(main_buf);
 	writel(store, main_buf);
+#elif defined(MXC_NFC_V3_2)
+	ret = readnfc(&host->regs->config1) >> 16;
+#endif
 
 	return ret;
 }
@@ -328,6 +367,7 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	uint16_t tmp = readnfc(&host->regs->config1);
 
 	if (on)
@@ -335,6 +375,15 @@ static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
 	else
 		tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
 	writenfc(tmp, &host->regs->config1);
+#elif defined(MXC_NFC_V3_2)
+	uint32_t tmp = readnfc(&host->ip_regs->config2);
+
+	if (on)
+		tmp |= NFC_V3_CONFIG2_ECC_EN;
+	else
+		tmp &= ~NFC_V3_CONFIG2_ECC_EN;
+	writenfc(tmp, &host->ip_regs->config2);
+#endif
 }
 
 #ifdef CONFIG_MXC_NAND_HWECC
@@ -346,7 +395,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	 */
 }
 
-#ifdef MXC_NFC_V2_1
+#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
 				      struct nand_chip *chip,
 				      int page, int sndcmd)
@@ -1136,8 +1185,8 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 int board_nand_init(struct nand_chip *this)
 {
 	struct mtd_info *mtd;
-#ifdef MXC_NFC_V2_1
-	uint16_t tmp;
+#if defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
+	uint32_t tmp;
 #endif
 
 #ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
@@ -1165,13 +1214,17 @@ int board_nand_init(struct nand_chip *this)
 	this->verify_buf = mxc_nand_verify_buf;
 
 	host->regs = (struct fsl_nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+#ifdef MXC_NFC_V3_2
+	host->ip_regs =
+		(struct fsl_nfc_ip_regs __iomem *)CONFIG_MXC_NAND_IP_REGS_BASE;
+#endif
 	host->clk_act = 1;
 
 #ifdef CONFIG_MXC_NAND_HWECC
 	this->ecc.calculate = mxc_nand_calculate_ecc;
 	this->ecc.hwctl = mxc_nand_enable_hwecc;
 	this->ecc.correct = mxc_nand_correct_data;
-	if (is_mxc_nfc_21()) {
+	if (is_mxc_nfc_21() || is_mxc_nfc_32()) {
 		this->ecc.mode = NAND_ECC_HW_SYNDROME;
 		this->ecc.read_page = mxc_nand_read_page_syndrome;
 		this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
@@ -1209,6 +1262,7 @@ int board_nand_init(struct nand_chip *this)
 	this->ecc.layout = &nand_hw_eccoob;
 #endif
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #ifdef MXC_NFC_V2_1
 	tmp = readnfc(&host->regs->config1);
 	tmp |= NFC_V2_CONFIG1_ONE_CYCLE;
@@ -1243,6 +1297,49 @@ int board_nand_init(struct nand_chip *this)
 
 	/* Unlock Block Command for given address range */
 	writenfc(0x4, &host->regs->wrprot);
+#elif defined(MXC_NFC_V3_2)
+	writenfc(NFC_V3_CONFIG1_RBA(0), &host->regs->config1);
+	writenfc(NFC_V3_IPC_CREQ, &host->ip_regs->ipc);
+
+	/* Unlock the internal RAM Buffer */
+	writenfc(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+			&host->ip_regs->wrprot);
+
+	/* Blocks to be unlocked */
+	for (tmp = 0; tmp < CONFIG_SYS_NAND_MAX_CHIPS; tmp++)
+		writenfc(0x0 | 0xFFFF << 16,
+				&host->ip_regs->wrprot_unlock_blkaddr[tmp]);
+
+	writenfc(0, &host->ip_regs->ipc);
+
+	tmp = readnfc(&host->ip_regs->config2);
+	tmp &= ~(NFC_V3_CONFIG2_SPAS_MASK | NFC_V3_CONFIG2_EDC_MASK |
+			NFC_V3_CONFIG2_ECC_MODE_8 | NFC_V3_CONFIG2_PS_MASK);
+	tmp |= NFC_V3_CONFIG2_ONE_CYCLE;
+
+	if (host->pagesize_2k) {
+		tmp |= NFC_V3_CONFIG2_SPAS(64/2);
+		tmp |= NFC_V3_CONFIG2_PS_2048;
+	} else {
+		tmp |= NFC_V3_CONFIG2_SPAS(16/2);
+		tmp |= NFC_V3_CONFIG2_PS_512;
+	}
+
+	writenfc(tmp, &host->ip_regs->config2);
+
+	tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+
+	if (!(this->options & NAND_BUSWIDTH_16))
+		tmp |= NFC_V3_CONFIG3_FW8;
+
+	writenfc(tmp, &host->ip_regs->config3);
+
+	writenfc(0, &host->ip_regs->delay_line);
+#endif
 
 	return 0;
 }

include/fsl_nfc.h

@@ -33,7 +33,8 @@
  *	to support up to 2K byte pagesize nand.
  *	Reading or writing a 2K page requires 4 FDI/FDO cycles.
  *
- * MX25 and MX35 have version 2.1, which has:
+ * MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
+ * have:
  *	8 512-byte main buffers and
  *	8 64-byte spare buffers
  *	to support up to 4K byte pagesize nand.
@@ -44,20 +45,29 @@
 #define MXC_NFC_V1
 #define is_mxc_nfc_1()		1
 #define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		0
 #elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
 #define MXC_NFC_V2_1
 #define is_mxc_nfc_1()		0
 #define is_mxc_nfc_21()		1
+#define is_mxc_nfc_32()		0
+#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
+#define MXC_NFC_V3
+#define MXC_NFC_V3_2
+#define is_mxc_nfc_1()		0
+#define is_mxc_nfc_21()		0
+#define is_mxc_nfc_32()		1
 #else
 #error "MXC NFC implementation not supported"
 #endif
+#define is_mxc_nfc_3()		is_mxc_nfc_32()
 
 #if defined(MXC_NFC_V1)
 #define NAND_MXC_NR_BUFS		4
 #define NAND_MXC_SPARE_BUF_SIZE		16
 #define NAND_MXC_REG_OFFSET		0xe00
 #define NAND_MXC_2K_MULTI_CYCLE
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 #define NAND_MXC_NR_BUFS		8
 #define NAND_MXC_SPARE_BUF_SIZE		64
 #define NAND_MXC_REG_OFFSET		0x1e00
@@ -110,9 +120,28 @@ struct fsl_nfc_regs {
 	u16 unlockend_blkaddr2;
 	u16 unlockstart_blkaddr3;
 	u16 unlockend_blkaddr3;
+#elif defined(MXC_NFC_V3_2)
+	u32 flash_cmd;
+	u32 flash_addr[12];
+	u32 config1;
+	u32 ecc_status_result;
+	u32 status_sum;
+	u32 launch;
 #endif
 };
 
+#ifdef MXC_NFC_V3_2
+struct fsl_nfc_ip_regs {
+	u32 wrprot;
+	u32 wrprot_unlock_blkaddr[8];
+	u32 config2;
+	u32 config3;
+	u32 ipc;
+	u32 err_addr;
+	u32 delay_line;
+};
+#endif
+
 /* Set FCMD to 1, rest to 0 for Command operation */
 #define NFC_CMD				0x1
 
@@ -131,20 +160,66 @@ struct fsl_nfc_regs {
 /* Set FDO to 100, rest to 0 for Read Status operation */
 #define NFC_STATUS			0x20
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #define NFC_CONFIG1_SP_EN		(1 << 2)
 #define NFC_CONFIG1_RST			(1 << 6)
 #define NFC_CONFIG1_CE			(1 << 7)
+#elif defined(MXC_NFC_V3_2)
+#define NFC_CONFIG1_SP_EN		(1 << 0)
+#define NFC_CONFIG1_CE			(1 << 1)
+#define NFC_CONFIG1_RST			(1 << 2)
+#endif
 #define NFC_V1_V2_CONFIG1_ECC_EN	(1 << 3)
 #define NFC_V1_V2_CONFIG1_INT_MSK	(1 << 4)
 #define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
 #define NFC_V2_CONFIG1_ECC_MODE_4	(1 << 0)
 #define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
 #define NFC_V2_CONFIG1_FP_INT		(1 << 11)
+#define NFC_V3_CONFIG1_RBA_MASK		(0x7 << 4)
+#define NFC_V3_CONFIG1_RBA(x)		(((x) & 0x7) << 4)
 
 #define NFC_V1_V2_CONFIG2_INT		(1 << 15)
+#define NFC_V3_CONFIG2_PS_MASK		(0x3 << 0)
+#define NFC_V3_CONFIG2_PS_512		(0 << 0)
+#define NFC_V3_CONFIG2_PS_2048		(1 << 0)
+#define NFC_V3_CONFIG2_PS_4096		(2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE	(1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN		(1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES	(1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH0	(1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8	(1 << 6)
+#define NFC_V3_CONFIG2_PPB_MASK		(0x3 << 7)
+#define NFC_V3_CONFIG2_PPB(x)		(((x) & 0x3) << 7)
+#define NFC_V3_CONFIG2_EDC_MASK		(0x7 << 9)
+#define NFC_V3_CONFIG2_EDC(x)		(((x) & 0x7) << 9)
+#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x)	(((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK		(1 << 15)
+#define NFC_V3_CONFIG2_SPAS_MASK	(0xff << 16)
+#define NFC_V3_CONFIG2_SPAS(x)		(((x) & 0xff) << 16)
+#define NFC_V3_CONFIG2_ST_CMD_MASK	(0xff << 24)
+#define NFC_V3_CONFIG2_ST_CMD(x)	(((x) & 0xff) << 24)
+
+#define NFC_V3_CONFIG3_ADD_OP(x)	(((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8		(1 << 3)
+#define NFC_V3_CONFIG3_SBB(x)		(((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVS(x)	(((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE		(1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA		(1 << 20)
 
+#define NFC_V3_WRPROT_UNLOCK		(1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK	(2 << 6)
+
+#define NFC_V3_IPC_CREQ			(1 << 0)
+#define NFC_V3_IPC_INT			(1 << 31)
+
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 #define operation	config2
 #define readnfc		readw
 #define writenfc	writew
+#elif defined(MXC_NFC_V3_2)
+#define operation	launch
+#define readnfc		readl
+#define writenfc	writel
+#endif
 
 #endif /* __FSL_NFC_H */

nand_spl/nand_boot_fsl_nfc.c

@@ -30,12 +30,18 @@
 #include <asm/io.h>
 #include <fsl_nfc.h>
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR;
+#elif defined(MXC_NFC_V3_2)
+static struct fsl_nfc_regs *const nfc = (void *)NFC_BASE_ADDR_AXI;
+static struct fsl_nfc_ip_regs *const nfc_ip = (void *)NFC_BASE_ADDR;
+#endif
 
 static void nfc_wait_ready(void)
 {
 	uint32_t tmp;
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	while (!(readnfc(&nfc->config2) & NFC_V1_V2_CONFIG2_INT))
 		;
 
@@ -43,11 +49,56 @@ static void nfc_wait_ready(void)
 	tmp = readnfc(&nfc->config2);
 	tmp &= ~NFC_V1_V2_CONFIG2_INT;
 	writenfc(tmp, &nfc->config2);
+#elif defined(MXC_NFC_V3_2)
+	while (!(readnfc(&nfc_ip->ipc) & NFC_V3_IPC_INT))
+		;
+
+	/* Reset interrupt flag */
+	tmp = readnfc(&nfc_ip->ipc);
+	tmp &= ~NFC_V3_IPC_INT;
+	writenfc(tmp, &nfc_ip->ipc);
+#endif
 }
 
 static void nfc_nand_init(void)
 {
-#if defined(MXC_NFC_V2_1)
+#if defined(MXC_NFC_V3_2)
+	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+	int tmp;
+
+	tmp = (readnfc(&nfc_ip->config2) & ~(NFC_V3_CONFIG2_SPAS_MASK |
+			NFC_V3_CONFIG2_EDC_MASK | NFC_V3_CONFIG2_PS_MASK)) |
+		NFC_V3_CONFIG2_SPAS(CONFIG_SYS_NAND_SPARE_SIZE / 2) |
+		NFC_V3_CONFIG2_INT_MSK | NFC_V3_CONFIG2_ECC_EN |
+		NFC_V3_CONFIG2_ONE_CYCLE;
+	if (CONFIG_SYS_NAND_PAGE_SIZE == 4096)
+		tmp |= NFC_V3_CONFIG2_PS_4096;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 2048)
+		tmp |= NFC_V3_CONFIG2_PS_2048;
+	else if (CONFIG_SYS_NAND_PAGE_SIZE == 512)
+		tmp |= NFC_V3_CONFIG2_PS_512;
+	/*
+	 * if spare size is larger that 16 bytes per 512 byte hunk
+	 * then use 8 symbol correction instead of 4
+	 */
+	if (CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16)
+		tmp |= NFC_V3_CONFIG2_ECC_MODE_8;
+	else
+		tmp &= ~NFC_V3_CONFIG2_ECC_MODE_8;
+	writenfc(tmp, &nfc_ip->config2);
+
+	tmp = NFC_V3_CONFIG3_NUM_OF_DEVS(0) |
+			NFC_V3_CONFIG3_NO_SDMA |
+			NFC_V3_CONFIG3_RBB_MODE |
+			NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+			NFC_V3_CONFIG3_ADD_OP(0);
+#ifndef CONFIG_SYS_NAND_BUSWIDTH_16
+	tmp |= NFC_V3_CONFIG3_FW8;
+#endif
+	writenfc(tmp, &nfc_ip->config3);
+
+	writenfc(0, &nfc_ip->delay_line);
+#elif defined(MXC_NFC_V2_1)
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int config1;
 
@@ -123,7 +174,13 @@ static void nfc_nand_data_output(void)
 	int i;
 #endif
 
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
 	writenfc(NFC_OUTPUT, &nfc->operation);
 	nfc_wait_ready();
 #ifdef NAND_MXC_2K_MULTI_CYCLE
@@ -144,7 +201,7 @@ static int nfc_nand_check_ecc(void)
 #if defined(MXC_NFC_V1)
 	u16 ecc_status = readw(&nfc->ecc_status_result);
 	return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2;
-#elif defined(MXC_NFC_V2_1)
+#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
 	u32 ecc_status = readl(&nfc->ecc_status_result);
 	int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
 	int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;
@@ -163,7 +220,13 @@ static int nfc_nand_check_ecc(void)
 static void nfc_nand_read_page(unsigned int page_address)
 {
 	/* read in first 0 buffer */
+#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
 	writenfc(0, &nfc->buf_addr);
+#elif defined(MXC_NFC_V3_2)
+	int config1 = readnfc(&nfc->config1);
+	config1 &= ~NFC_V3_CONFIG1_RBA_MASK;
+	writenfc(config1, &nfc->config1);
+#endif
 	nfc_nand_command(NAND_CMD_READ0);
 	nfc_nand_page_address(page_address);