s3c24x0: move serial driver to drivers/serial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

cpu/arm920t/s3c24x0/Makefile

@@ -25,8 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb.o usb_ohci.o nand.o
+COBJS	= i2c.o interrupts.o speed.o usb.o usb_ohci.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))

drivers/serial/Makefile

@@ -44,6 +44,7 @@ COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o
 COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_SA1100_SERIAL) += serial_sa1100.o
+COBJS-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o
 COBJS-$(CONFIG_S3C44B0_SERIAL) += serial_s3c44b0.o
 COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o

cpu/arm920t/s3c24x0/serial.c → drivers/serial/serial_s3c24x0.c

@@ -19,8 +19,6 @@
  */
 
 #include <common.h>
-#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
-
 #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
@@ -300,5 +298,3 @@ struct serial_device s3c24xx_serial2_device =
 	INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
 
 #endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */

include/configs/VCMA9.h

@@ -117,6 +117,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1          1	/* we use SERIAL 1 on VCMA9 */
 
 /************************************************************

include/configs/sbc2410x.h

@@ -70,6 +70,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SBC2410X */
 
 /************************************************************

include/configs/smdk2400.h

@@ -63,6 +63,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SAMSUNG */
 
 #undef	CONFIG_HWFLOW			/* include RTS/CTS flow control support	*/

include/configs/smdk2410.h

@@ -60,6 +60,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SMDK2410 */
 
 /************************************************************

include/configs/trab.h

@@ -111,6 +111,7 @@
 /*
  * select serial console configuration
  */
+#define CONFIG_S3C24X0_SERIAL
 #define CONFIG_SERIAL1		1	/* we use SERIAL 1 on TRAB */
 
 #define CONFIG_HWFLOW			/* include RTS/CTS flow control support	*/