Merge branch 'Makefile' of git://git.denx.de/u-boot-arm

Makefile

@@ -2695,7 +2695,7 @@ imx31_phycore_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
 
 mx31ads_config		: unconfig
-	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads NULL mx31
+	@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
 
 omap2420h4_config	: unconfig
 	@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx

README

@@ -2064,7 +2064,7 @@ Configuration Settings:
 		Define if the flash driver uses extra elements in the
 		common flash structure for storing flash geometry.
 
-- CFG_FLASH_CFI_DRIVER
+- CONFIG_FLASH_CFI_DRIVER
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 

board/delta/nand.c

@@ -23,7 +23,7 @@
 #include <common.h>
 
 #if defined(CONFIG_CMD_NAND)
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>

board/esd/common/auto_update.c

@@ -27,7 +27,7 @@
 #include <command.h>
 #include <image.h>
 #include <asm/byteorder.h>
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 #include <linux/mtd/nand_legacy.h>
 #endif
 #include <fat.h>
@@ -58,7 +58,7 @@ extern int flash_sect_erase(ulong, ulong);
 extern int flash_sect_protect (int, ulong, ulong);
 extern int flash_write (char *, ulong, ulong);
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 /* references to names in cmd_nand.c */
 #define NANDRW_READ	0x01
 #define NANDRW_WRITE	0x00
@@ -158,7 +158,7 @@ int au_do_update(int i, long sz)
 	int off, rc;
 	uint nbytes;
 	int k;
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 	int total;
 #endif
 
@@ -241,7 +241,7 @@ int au_do_update(int i, long sz)
 			debug ("flash_sect_erase(%lx, %lx);\n", start, end);
 			flash_sect_erase (start, end);
 		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 			printf ("Updating NAND FLASH with image %s\n",
 				au_image[i].name);
 			debug ("nand_legacy_erase(%lx, %lx);\n", start, end);
@@ -273,7 +273,7 @@ int au_do_update(int i, long sz)
 			rc = flash_write ((char *)addr, start,
 					  (nbytes + 1) & ~1);
 		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 			debug ("nand_legacy_rw(%p, %lx, %x)\n",
 			       addr, start, nbytes);
 			rc = nand_legacy_rw (nand_dev_desc,
@@ -298,7 +298,7 @@ int au_do_update(int i, long sz)
 			rc = crc32 (0, (uchar *)(start + off),
 				    image_get_data_size (hdr));
 		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 			rc = nand_legacy_rw (nand_dev_desc,
 					     NANDRW_READ | NANDRW_JFFS2 |
 					     NANDRW_JFFS2_SKIP,

board/mx31ads/u-boot.lds → board/freescale/mx31ads/u-boot.lds

@@ -37,11 +37,11 @@ SECTIONS
 	  /* WARNING - the following is hand-optimized to fit within	*/
 	  /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-	  cpu/arm1136/start.o		(.text)
-	  board/mx31ads/libmx31ads.a	(.text)
-	  lib_arm/libarm.a		(.text)
-	  net/libnet.a			(.text)
-	  drivers/mtd/libmtd.a		(.text)
+	  cpu/arm1136/start.o			(.text)
+	  board/freescale/mx31ads/libmx31ads.a	(.text)
+	  lib_arm/libarm.a			(.text)
+	  net/libnet.a				(.text)
+	  drivers/mtd/libmtd.a			(.text)
 
 	  . = DEFINED(env_offset) ? env_offset : .;
 	  common/environment.o(.text)

board/icecube/flash.c

@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#ifndef CFG_FLASH_CFI_DRIVER
+#ifndef CONFIG_FLASH_CFI_DRIVER
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 
 /* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
@@ -490,4 +490,4 @@ static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
 
 	return (res);
 }
-#endif /*CFG_FLASH_CFI_DRIVER*/
+#endif /*CONFIG_FLASH_CFI_DRIVER*/

board/netta/netta.c

@@ -555,7 +555,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
 
 #include <linux/mtd/nand_legacy.h>
 

board/prodrive/pdnb3/flash.c

@@ -24,7 +24,7 @@
 #include <common.h>
 #include <asm/arch/ixp425.h>
 
-#if !defined(CFG_FLASH_CFI_DRIVER)
+#if !defined(CONFIG_FLASH_CFI_DRIVER)
 
 /*
  * include common flash code (for esd boards)
@@ -86,4 +86,4 @@ unsigned long flash_init(void)
 	return size;
 }
 
-#endif /* CFG_FLASH_CFI_DRIVER */
+#endif /* CONFIG_FLASH_CFI_DRIVER */

board/tqc/tqm8xx/flash.c

@@ -33,7 +33,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if !defined(CFG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
+#if !defined(CONFIG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
 
 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
     && !defined(CONFIG_TQM885D)
@@ -831,4 +831,4 @@ static int write_word (flash_info_t *info, ulong dest, ulong data)
 /*-----------------------------------------------------------------------
  */
 
-#endif /* !defined(CFG_FLASH_CFI_DRIVER) */
+#endif /* !defined(CONFIG_FLASH_CFI_DRIVER) */

common/ACEX1K.c

@@ -28,8 +28,6 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <ACEX1K.h>		/* ACEX device family */
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_ACEX1K)
-
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
 #define PRINTF(fmt,args...)	printf (fmt ,##args)
@@ -362,5 +360,3 @@ static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset)
 	return ret_val;
 
 }
-
-#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_ACEX1K */

common/Makefile

@@ -28,9 +28,7 @@ LIB	= $(obj)libcommon.a
 AOBJS	=
 
 COBJS-y += main.o
-COBJS-y += ACEX1K.o
-COBJS-y += altera.o
-COBJS-y += bedbug.o
+COBJS-$(CONFIG_CMD_BEDBUG) += bedbug.o
 COBJS-y += circbuf.o
 COBJS-$(CONFIG_CMD_AMBAPP) += cmd_ambapp.o
 COBJS-y += cmd_autoscript.o
@@ -64,7 +62,18 @@ COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
 COBJS-$(CONFIG_CMD_FDOS) += cmd_fdos.o
 COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o
 ifdef CONFIG_FPGA
+COBJS-y += fpga.o
 COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
+COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o
+COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o
+COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o
+COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o
+ifdef CONFIG_FPGA_ALTERA
+COBJS-y += altera.o
+COBJS-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
+COBJS-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
+COBJS-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
+endif
 endif
 COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
 COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
@@ -80,7 +89,7 @@ COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
 COBJS-y += cmd_nand.o
 COBJS-$(CONFIG_CMD_NET) += cmd_net.o
 COBJS-y += cmd_nvedit.o
-COBJS-y += cmd_onenand.o
+COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o
 COBJS-$(CONFIG_CMD_OTP) += cmd_otp.o
 ifdef CONFIG_PCI
 COBJS-$(CONFIG_CMD_PCI) += cmd_pci.o
@@ -102,11 +111,9 @@ COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o
 COBJS-y += cmd_vfd.o
 COBJS-y += command.o
 COBJS-y += console.o
-COBJS-y += cyclon2.o
-COBJS-y += stratixII.o
 COBJS-y += devices.o
 COBJS-y += dlmalloc.o
-COBJS-y += docecc.o
+COBJS-$(CONFIG_CMD_DOC) += docecc.o
 COBJS-y += environment.o
 COBJS-y += env_common.o
 COBJS-y += env_nand.o
@@ -119,26 +126,23 @@ COBJS-y += env_nvram.o
 COBJS-y += env_nowhere.o
 COBJS-y += exports.o
 COBJS-y += flash.o
-COBJS-y += fpga.o
 COBJS-y += hush.o
 COBJS-y += kgdb.o
-COBJS-y += lcd.o
+COBJS-$(CONFIG_LCD) += lcd.o
 COBJS-y += lists.o
-COBJS-y += lynxkdi.o
+COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o
 COBJS-y += memsize.o
-COBJS-y += miiphybb.o
+COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
 COBJS-y += miiphyutil.o
 COBJS-y += s_record.o
 COBJS-y += serial.o
-COBJS-y += soft_i2c.o
-COBJS-y += soft_spi.o
-COBJS-y += spartan2.o
-COBJS-y += spartan3.o
+COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
+COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
+ifdef CONFIG_CMD_USB
 COBJS-y += usb.o
-COBJS-y += usb_kbd.o
-COBJS-y += usb_storage.o
-COBJS-y += virtex2.o
-COBJS-y += xilinx.o
+COBJS-$(CONFIG_USB_STORAGE) += usb_storage.o
+endif
+COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
 COBJS-y += crc16.o
 COBJS-y += xyzModem.o
 COBJS-y += cmd_mac.o

common/altera.c

@@ -41,8 +41,6 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
-
 /* Local Static Functions */
 static int altera_validate (Altera_desc * desc, const char *fn);
 
@@ -283,5 +281,3 @@ static int altera_validate (Altera_desc * desc, const char *fn)
 }
 
 /* ------------------------------------------------------------------------- */
-
-#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */

common/bedbug.c

@@ -2,8 +2,6 @@
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_BEDBUG)
-
 #include <linux/ctype.h>
 #include <bedbug/bedbug.h>
 #include <bedbug/ppc.h>
@@ -1252,5 +1250,3 @@ int find_next_address (unsigned char *nextaddr, int step_over,
  * warranties of merchantability and fitness for a particular
  * purpose.
  */
-
-#endif

common/cmd_jffs2.c

@@ -96,12 +96,12 @@
 #include <cramfs/cramfs_fs.h>
 
 #if defined(CONFIG_CMD_NAND)
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
 #include <linux/mtd/nand_legacy.h>
-#else /* !CFG_NAND_LEGACY */
+#else /* !CONFIG_NAND_LEGACY */
 #include <linux/mtd/nand.h>
 #include <nand.h>
-#endif /* !CFG_NAND_LEGACY */
+#endif /* !CONFIG_NAND_LEGACY */
 #endif
 /* enable/disable debugging messages */
 #define	DEBUG_JFFS
@@ -476,7 +476,7 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
 		}
 	}
 
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
 	jffs2_free_cache(part);
 #endif
 	list_del(&part->link);
@@ -505,7 +505,7 @@ static void part_delall(struct list_head *head)
 	list_for_each_safe(entry, n, head) {
 		part_tmp = list_entry(entry, struct part_info, link);
 
-#ifdef CFG_NAND_LEGACY
+#ifdef CONFIG_NAND_LEGACY
 		jffs2_free_cache(part_tmp);
 #endif
 		list_del(entry);
@@ -741,7 +741,7 @@ static int device_validate(u8 type, u8 num, u32 *size)
 	} else if (type == MTD_DEV_TYPE_NAND) {
 #if defined(CONFIG_JFFS2_NAND) && defined(CONFIG_CMD_NAND)
 		if (num < CFG_MAX_NAND_DEVICE) {
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 			*size = nand_info[num].size;
 #else
 			extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];

common/cmd_nand.c

@@ -11,7 +11,7 @@
 #include <common.h>
 
 
-#ifndef CFG_NAND_LEGACY
+#ifndef CONFIG_NAND_LEGACY
 /*
  *
  * New NAND support
@@ -667,7 +667,7 @@ U_BOOT_CMD(nboot, 4, 1, do_nandboot,
 
 #endif
 
-#else /* CFG_NAND_LEGACY */
+#else /* CONFIG_NAND_LEGACY */
 /*
  *
  * Legacy NAND support - to be phased out
@@ -1077,4 +1077,4 @@ U_BOOT_CMD(
 
 #endif
 
-#endif /* CFG_NAND_LEGACY */
+#endif /* CONFIG_NAND_LEGACY */

common/cmd_onenand.c

@@ -12,8 +12,6 @@
 #include <common.h>
 #include <command.h>
 
-#ifdef CONFIG_CMD_ONENAND
-
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
@@ -159,5 +157,3 @@ U_BOOT_CMD(
 	"onenand block[.oob] addr block [page] [len] - "
 		"read data with (block [, page]) to addr"
 );
-
-#endif /* CONFIG_CMD_ONENAND */

common/cyclon2.c

@@ -27,8 +27,6 @@
 #include <altera.h>
 #include <ACEX1K.h>		/* ACEX device family */
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
-
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
 #define PRINTF(fmt,args...)	printf (fmt ,##args)
@@ -301,5 +299,3 @@ static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
 
 	return ret_val;
 }
-
-#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */

common/docecc.c

@@ -31,8 +31,6 @@
 #undef ECC_DEBUG
 #undef PSYCHO_DEBUG
 
-#if defined(CONFIG_CMD_DOC)
-
 #include <linux/mtd/doc2000.h>
 
 /* need to undef it (from asm/termbits.h) */
@@ -513,5 +511,3 @@ int doc_decode_ecc(unsigned char sector[SECTOR_SIZE], unsigned char ecc1[6])
     free(Index_of);
     return nb_errors;
 }
-
-#endif

common/fpga.c

@@ -29,8 +29,6 @@
 #include <xilinx.h>             /* xilinx specific definitions */
 #include <altera.h>             /* altera specific definitions */
 
-#if defined(CONFIG_FPGA)
-
 #if 0
 #define FPGA_DEBUG              /* define FPGA_DEBUG to get debug messages */
 #endif
@@ -335,5 +333,3 @@ int fpga_info( int devnum )
 }
 
 /* ------------------------------------------------------------------------- */
-
-#endif  /* CONFIG_FPGA */

common/lcd.c

@@ -55,8 +55,6 @@
 #include <nand.h>
 #endif
 
-#ifdef CONFIG_LCD
-
 /************************************************************************/
 /* ** FONT DATA								*/
 /************************************************************************/
@@ -867,5 +865,3 @@ static void *lcd_logo (void)
 
 /************************************************************************/
 /************************************************************************/
-
-#endif /* CONFIG_LCD */

common/lynxkdi.c

@@ -17,7 +17,6 @@
 #include <asm/processor.h>
 #include <image.h>
 
-#if defined(CONFIG_LYNXKDI)
 #include <lynxkdi.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -66,5 +65,3 @@ void lynxkdi_boot (image_header_t *hdr)
 #else
 #error "Lynx KDI support not implemented for configured CPU"
 #endif
-
-#endif	/* CONFIG_LYNXKDI */

common/miiphybb.c

@@ -30,9 +30,6 @@
 #include <ioports.h>
 #include <ppc_asm.tmpl>
 
-#ifdef CONFIG_BITBANGMII
-
-
 /*****************************************************************************
  *
  * Utility to send the preamble, address, and register (common to read
@@ -236,5 +233,3 @@ int bb_miiphy_write (char *devname, unsigned char addr,
 
 	return 0;
 }
-
-#endif /* CONFIG_BITBANGMII */

common/soft_i2c.c

@@ -41,8 +41,6 @@
 #endif
 #include <i2c.h>
 
-#if defined(CONFIG_SOFT_I2C)
-
 /* #define	DEBUG_I2C	*/
 
 #ifdef DEBUG_I2C
@@ -423,6 +421,3 @@ void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
 {
 	i2c_write(i2c_addr, reg, 1, &val, 1);
 }
-
-
-#endif	/* CONFIG_SOFT_I2C */

common/soft_spi.c

@@ -27,8 +27,6 @@
 #include <common.h>
 #include <spi.h>
 
-#if defined(CONFIG_SOFT_SPI)
-
 #include <malloc.h>
 
 /*-----------------------------------------------------------------------
@@ -193,5 +191,3 @@ int  spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 
 	return(0);
 }
-
-#endif	/* CONFIG_SOFT_SPI */

common/spartan2.c

@@ -25,8 +25,6 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <spartan2.h>		/* Spartan-II device family */
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN2)
-
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
 #define PRINTF(fmt,args...)	printf (fmt ,##args)
@@ -663,5 +661,3 @@ static int Spartan2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
 	return ret_val;
 
 }
-
-#endif

common/spartan3.c

@@ -30,8 +30,6 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <spartan3.h>		/* Spartan-II device family */
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN3)
-
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
 #define PRINTF(fmt,args...)	printf (fmt ,##args)
@@ -668,5 +666,3 @@ static int Spartan3_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
 	return ret_val;
 
 }
-
-#endif

common/stratixII.c

@@ -25,8 +25,6 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <altera.h>
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_STRATIX_II)
-
 int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
 			   int isSerial, int isSecure);
 int StratixII_ps_fpp_dump (Altera_desc * desc, void *buf, size_t bsize);
@@ -231,5 +229,3 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
 
 	return FPGA_SUCCESS;
 }
-
-#endif				/* defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_STRATIX_II) */

common/usb.c

@@ -50,8 +50,6 @@
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
 
-#if defined(CONFIG_CMD_USB)
-
 #include <usb.h>
 #ifdef CONFIG_4xx
 #include <asm/4xx_pci.h>
@@ -1247,6 +1245,4 @@ int usb_hub_probe(struct usb_device *dev, int ifnum)
 	return ret;
 }
 
-#endif
-
 /* EOF */

common/usb_kbd.c

@@ -28,8 +28,6 @@
 #include <devices.h>
 #include <asm/byteorder.h>
 
-#ifdef CONFIG_USB_KEYBOARD
-
 #include <usb.h>
 
 #undef USB_KBD_DEBUG
@@ -746,7 +744,4 @@ static int usb_kbd_get_hid_desc(struct usb_device *dev)
 
 }
 
-
 #endif
-
-#endif /* CONFIG_USB_KEYBOARD */

common/usb_storage.c

@@ -55,13 +55,9 @@
 #include <asm/byteorder.h>
 #include <asm/processor.h>
 
-
-#if defined(CONFIG_CMD_USB)
 #include <part.h>
 #include <usb.h>
 
-#ifdef CONFIG_USB_STORAGE
-
 #undef USB_STOR_DEBUG
 #undef BBB_COMDAT_TRACE
 #undef BBB_XPORT_TRACE
@@ -1242,6 +1238,3 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
 	USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type);
 	return 1;
 }
-
-#endif /* CONFIG_USB_STORAGE */
-#endif

common/virtex2.c

@@ -31,8 +31,6 @@
 #include <common.h>
 #include <virtex2.h>
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_VIRTEX2)
-
 #if 0
 #define FPGA_DEBUG
 #endif
@@ -552,6 +550,5 @@ static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
 	}
 	return ret_val;
 }
-#endif
 
 /* vim: set ts=4 tw=78: */

common/xilinx.c

@@ -32,8 +32,6 @@
 #include <spartan2.h>
 #include <spartan3.h>
 
-#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
-
 #if 0
 #define FPGA_DEBUG
 #endif
@@ -307,5 +305,3 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn)
 
 	return ret_val;
 }
-
-#endif	/* CONFIG_FPGA && CONFIG_FPGA_XILINX */

cpu/arm920t/s3c24x0/nand.c

@@ -27,7 +27,7 @@
 #endif
 
 #if defined(CONFIG_CMD_NAND)
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <s3c2410.h>

cpu/arm926ejs/davinci/nand.c

@@ -45,7 +45,7 @@
 #include <asm/io.h>
 
 #ifdef CFG_USE_NAND
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <nand.h>
 #include <asm/arch/nand_defs.h>

cpu/ppc4xx/ndfc.c

@@ -31,7 +31,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CONFIG_NAND_LEGACY) && \
 	(defined(CONFIG_440EP) || defined(CONFIG_440GR) ||	     \
 	 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ||	     \
 	 defined(CONFIG_405EZ) || defined(CONFIG_405EX) ||	     \

doc/README.nand

@@ -184,7 +184,7 @@ We now use a complete rewrite of the NAND code based on what is in
 The old NAND handling code has been re-factored and is now confined
 to only board-specific files and - unfortunately - to the DoC code
 (see below). A new configuration variable has been introduced:
-CFG_NAND_LEGACY, which has to be defined in the board config file if
+CONFIG_NAND_LEGACY, which has to be defined in the board config file if
 that board uses legacy code.
 
 The necessary changes have been made to all affected boards, and no

drivers/block/Makefile

@@ -25,14 +25,14 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libblock.a
 
-COBJS-y += ahci.o
-COBJS-y += ata_piix.o
+COBJS-$(CONFIG_SCSI_AHCI) += ahci.o
+COBJS-$(CONFIG_ATA_PIIX) += ata_piix.o
 COBJS-$(CONFIG_FSL_SATA) += fsl_sata.o
 COBJS-$(CONFIG_LIBATA) += libata.o
 COBJS-$(CONFIG_SATA_SIL3114) += sata_sil3114.o
-COBJS-y += sil680.o
-COBJS-y += sym53c8xx.o
-COBJS-y += systemace.o
+COBJS-$(CONFIG_IDE_SIL680) += sil680.o
+COBJS-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
+COBJS-$(CONFIG_SYSTEMACE) += systemace.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/block/ahci.c

@@ -26,8 +26,6 @@
  */
 #include <common.h>
 
-#ifdef CONFIG_SCSI_AHCI
-
 #include <command.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -700,4 +698,3 @@ void scsi_print_error(ccb * pccb)
 {
 	/*The ahci error info can be read in the ahci driver*/
 }
-#endif

drivers/block/ata_piix.c

@@ -35,8 +35,6 @@
 #include <ide.h>
 #include <ata.h>
 
-#ifdef CFG_ATA_PIIX		/*ata_piix driver */
-
 extern block_dev_desc_t sata_dev_desc[CFG_SATA_MAX_DEVICE];
 extern int curr_device;
 
@@ -756,5 +754,3 @@ int scan_sata(int dev)
 {
 	return 0;
 }
-
-#endif

drivers/block/sil680.c

@@ -27,7 +27,7 @@
  * The following parameters must be defined in the configuration file
  * of the target board:
  *
- * #define CFG_IDE_SIL680
+ * #define CONFIG_IDE_SIL680
  *
  * #define CONFIG_PCI_PNP
  * NOTE it may also be necessary to define this if the default of 8 is
@@ -54,7 +54,6 @@
  */
 
 #include <common.h>
-#if defined(CFG_IDE_SIL680)
 #include <ata.h>
 #include <ide.h>
 #include <pci.h>
@@ -106,5 +105,3 @@ int ide_preinit (void)
 void ide_set_reset (int flag) {
 	return;
 }
-
-#endif /* CFG_IDE_SIL680 */

drivers/block/sym53c8xx.c

@@ -35,8 +35,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_SCSI_SYM53C8XX
-
 #include <command.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -870,6 +868,3 @@ void scsi_chip_init(void)
 #endif
 }
 #endif
-
-
-#endif /* CONFIG_SCSI_SYM53C8XX */

drivers/block/systemace.c

@@ -44,8 +44,6 @@
 #include <part.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_SYSTEMACE
-
 /*
  * The ace_readw and writew functions read/write 16bit words, but the
  * offset value is the BYTE offset as most used in the Xilinx
@@ -255,4 +253,3 @@ static unsigned long systemace_read(int dev, unsigned long start,
 
 	return blkcnt;
 }
-#endif /* CONFIG_SYSTEMACE */

drivers/dma/MCD_dmaApi.c

@@ -24,8 +24,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_FSLDMAFEC
-
 #include <MCD_dma.h>
 #include <MCD_tasksInit.h>
 #include <MCD_progCheck.h>
@@ -1023,4 +1021,3 @@ static void MCD_memcpy(int *dest, int *src, u32 size)
 	for (i = 0; i < size; i += sizeof(int), dest++, src++)
 		*dest = *src;
 }
-#endif				/* CONFIG_FSLDMAFEC */

drivers/dma/MCD_tasks.c

@@ -24,8 +24,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_FSLDMAFEC
-
 #include <MCD_dma.h>
 
 u32 MCD_varTab0[];
@@ -2430,5 +2428,3 @@ u32 MCD_ENetXmit_TDT[] = {
 #ifdef MCD_INCLUDE_EU
 MCD_bufDesc MCD_singleBufDescs[NCHANNELS];
 #endif
-
-#endif                          /* CONFIG_FSLDMAFEC */

drivers/dma/MCD_tasksInit.c

@@ -28,8 +28,6 @@
  * Do not edit!
  */
 
-#ifdef CONFIG_FSLDMAFEC
-
 #include <MCD_dma.h>
 
 extern dmaRegs *MCD_dmaBar;
@@ -242,5 +240,3 @@ void MCD_startDmaENetXmit(char *bDBase, char *currBD, char *xmitFifoPtr,
 	/* Set the task's Enable bit in its Task Control Register */
 	MCD_dmaBar->taskControl[channel] |= (u16) 0x8000;
 }
-
-#endif			/* CONFIG_FSLDMAFEC */

drivers/dma/Makefile

@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libdma.a
 
-COBJS-y += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
+COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/input/Makefile

@@ -25,9 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libinput.a
 
-COBJS-y += i8042.o
-COBJS-y += keyboard.o
-COBJS-y += pc_keyb.o ps2ser.o ps2mult.o
+COBJS-$(CONFIG_I8042_KBD) += i8042.o
+ifdef CONFIG_PS2KBD
+COBJS-y += keyboard.o pc_keyb.o
+COBJS-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o
+endif
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/input/i8042.c

@@ -27,8 +27,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_I8042_KBD
-
 #ifdef CONFIG_USE_CPCIDVI
 extern u8  gt_cpcidvi_in8(u32 offset);
 extern void gt_cpcidvi_out8(u32 offset, u8 data);
@@ -670,5 +668,3 @@ static int kbd_reset (void)
 
     return 0;
 }
-
-#endif /* CONFIG_I8042_KBD */

drivers/input/keyboard.c

@@ -11,8 +11,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PS2KBD
-
 #include <devices.h>
 #include <keyboard.h>
 
@@ -301,5 +299,3 @@ int kbd_init (void)
 	}
 	return error;
 }
-
-#endif /* CONFIG_PS2KBD */

drivers/input/pc_keyb.c

@@ -13,8 +13,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PS2KBD
-
 #include <keyboard.h>
 #include <pc_keyb.h>
 
@@ -252,5 +250,3 @@ void pckbd_leds(unsigned char leds)
 	kbd_send_data(KBD_CMD_SET_LEDS);
 	kbd_send_data(leds);
 }
-
-#endif /* CONFIG_PS2KBD */

drivers/input/ps2mult.c

@@ -16,8 +16,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PS2MULT
-
 #include <pc_keyb.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
@@ -462,5 +460,3 @@ int ps2mult_request_irq(void (*handler)(void *))
 
 	return 0;
 }
-
-#endif /* CONFIG_PS2MULT */

drivers/input/ps2ser.c

@@ -15,8 +15,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PS2SERIAL
-
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
@@ -326,5 +324,3 @@ static void ps2ser_interrupt(void *dev_id)
 		ps2mult_callback(atomic_read(&ps2buf_cnt));
 	}
 }
-
-#endif /* CONFIG_PS2SERIAL */

drivers/misc/Makefile

@@ -25,10 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmisc.a
 
-COBJS-y += ali512x.o
-COBJS-y += ns87308.o
-COBJS-y += status_led.o
+COBJS-$(CONFIG_ALI152X) += ali512x.o
 COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
+COBJS-$(CONFIG_NS87308) += ns87308.o
+COBJS-$(CONFIG_STATUS_LED) += status_led.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/misc/ali512x.c

@@ -32,8 +32,6 @@
 
 #include <config.h>
 
-#ifdef CONFIG_ALI152X
-
 #include <common.h>
 #include <asm/io.h>
 #include <asm/ic/ali512x.h>
@@ -418,6 +416,3 @@ int ali512x_cio_in(int pin)
 
 	return data & bit;
 }
-
-
-#endif

drivers/misc/ns87308.c

@@ -23,8 +23,6 @@
 
 #include <config.h>
 
-#ifdef CFG_NS87308
-
 #include <ns87308.h>
 
 void initialise_ns87308 (void)
@@ -117,5 +115,3 @@ void initialise_ns87308 (void)
 	PNP_PGCS_CSLINE_CONF(2, CFG_NS87308_CS2_CONF);
 #endif
 }
-
-#endif

drivers/misc/status_led.c

@@ -35,8 +35,6 @@
 
 /* ------------------------------------------------------------------------- */
 
-#ifdef CONFIG_STATUS_LED
-
 typedef struct {
 	led_id_t mask;
 	int state;
@@ -127,5 +125,3 @@ void status_led_set (int led, int state)
 	}
 	__led_set (ld->mask, state);
 }
-
-#endif	/* CONFIG_STATUS_LED */

drivers/mtd/Makefile

@@ -25,11 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libmtd.a
 
-COBJS-y += at45.o
-COBJS-y += cfi_flash.o
+COBJS-$(CONFIG_HAS_DATAFLASH) += at45.o
+COBJS-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o
 COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o
-COBJS-y += mw_eeprom.o
 COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o
+COBJS-$(CONFIG_MW_EEPROM) += mw_eeprom.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/mtd/at45.c

@@ -20,8 +20,6 @@
 
 #include <config.h>
 #include <common.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>
 
 /*
@@ -559,4 +557,3 @@ int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
 	AT91F_DataFlashGetStatus(pDesc);
 	return ((pDesc->command[1] == 0xFF) ? 0 : pDesc->command[1] & 0x3C);
 }
-#endif

drivers/mtd/cfi_flash.c

@@ -39,7 +39,6 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 #include <environment.h>
-#ifdef	CFG_FLASH_CFI_DRIVER
 
 /*
  * This file implements a Common Flash Interface (CFI) driver for
@@ -2015,5 +2014,3 @@ unsigned long flash_init (void)
 #endif
 	return (size);
 }
-
-#endif /* CFG_FLASH_CFI */

drivers/mtd/mw_eeprom.c

@@ -1,9 +1,6 @@
 /* Three-wire (MicroWire) serial eeprom driver (for 93C46 and compatibles) */
 
 #include <common.h>
-
-#ifdef CONFIG_MW_EEPROM
-
 #include <ssi.h>
 
 /*
@@ -237,5 +234,3 @@ int mw_eeprom_probe(int dev)
 	}
 	return 0;
 }
-
-#endif

drivers/mtd/nand/Makefile

@@ -25,15 +25,19 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libnand.a
 
+ifdef CONFIG_CMD_NAND
+ifndef CONFIG_NAND_LEGACY
 COBJS-y += nand.o
 COBJS-y += nand_base.o
-COBJS-y += nand_ids.o
-COBJS-y += nand_ecc.o
 COBJS-y += nand_bbt.o
+COBJS-y += nand_ecc.o
+COBJS-y += nand_ids.o
 COBJS-y += nand_util.o
+endif
 
 COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
-COBJS-y += fsl_upm.o
+COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+endif
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/mtd/nand/diskonchip.c

@@ -21,7 +21,7 @@
 
 #include <common.h>
 
-#if !defined(CFG_NAND_LEGACY)
+#if !defined(CONFIG_NAND_LEGACY)
 
 #include <linux/kernel.h>
 #include <linux/init.h>

drivers/mtd/nand/fsl_upm.c

@@ -11,8 +11,6 @@
  */
 
 #include <config.h>
-
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_FSL_UPM)
 #include <common.h>
 #include <asm/io.h>
 #include <asm/errno.h>
@@ -150,4 +148,3 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
 
 	return 0;
 }
-#endif /* CONFIG_CMD_NAND */

drivers/mtd/nand/nand.c

@@ -22,9 +22,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <nand.h>
 
 #ifndef CFG_NAND_BASE_LIST
@@ -79,5 +76,3 @@ void nand_init(void)
 	board_nand_select_device(nand_info[nand_curr_device].priv, nand_curr_device);
 #endif
 }
-
-#endif

drivers/mtd/nand/nand_base.c

@@ -59,8 +59,6 @@
 
 #define ENOTSUPP	524	/* Operation is not supported */
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <malloc.h>
 #include <watchdog.h>
 #include <linux/err.h>
@@ -2822,6 +2820,3 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
 MODULE_DESCRIPTION("Generic NAND flash driver code");
 #endif
-
-#endif
-

drivers/mtd/nand/nand_bbt.c

@@ -53,9 +53,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <malloc.h>
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
@@ -1237,5 +1234,3 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
 EXPORT_SYMBOL(nand_scan_bbt);
 EXPORT_SYMBOL(nand_default_bbt);
 #endif
-
-#endif

drivers/mtd/nand/nand_ecc.c

@@ -39,8 +39,6 @@
 
 #include <common.h>
 
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 /* XXX U-BOOT XXX */
 #if 0
 #include <linux/types.h>
@@ -215,5 +213,3 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
 #if 0
 EXPORT_SYMBOL(nand_correct_data);
 #endif
-
-#endif

drivers/mtd/nand/nand_ids.c

@@ -12,9 +12,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <linux/mtd/nand.h>
 /*
 *	Chip ID list
@@ -147,4 +144,3 @@ struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_MICRON, "Micron"},
 	{0x0, "Unknown"}
 };
-#endif

drivers/mtd/nand/nand_util.c

@@ -31,9 +31,6 @@
  */
 
 #include <common.h>
-
-#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY)
-
 #include <command.h>
 #include <watchdog.h>
 #include <malloc.h>
@@ -606,5 +603,3 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
 
 	return 0;
 }
-
-#endif /* defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) */

drivers/mtd/nand_legacy/Makefile

@@ -25,8 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libnand_legacy.a
 
-COBJS	:= nand_legacy.o
+ifdef CONFIG_CMD_NAND
+COBJS-$(CONFIG_NAND_LEGACY)	:= nand_legacy.o
+endif
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

drivers/mtd/nand_legacy/nand_legacy.c

@@ -14,9 +14,6 @@
 #include <malloc.h>
 #include <asm/io.h>
 #include <watchdog.h>
-
-#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY)
-
 #include <linux/mtd/nand_legacy.h>
 #include <linux/mtd/nand_ids.h>
 #include <jffs2/jffs2.h>
@@ -1608,5 +1605,3 @@ int read_jffs2_nand(size_t start, size_t len,
 			start, len, retlen, buf);
 }
 #endif /* CONFIG_JFFS2_NAND */
-
-#endif

drivers/mtd/onenand/Makefile

@@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libonenand.a
 
-COBJS	:= onenand_uboot.o onenand_base.o onenand_bbt.o
+COBJS-$(CONFIG_CMD_ONENAND)	:= onenand_uboot.o onenand_base.o onenand_bbt.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

drivers/mtd/onenand/onenand_base.c

@@ -10,9 +10,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_CMD_ONENAND
-
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
@@ -1304,5 +1301,3 @@ int onenand_scan(struct mtd_info *mtd, int maxchips)
 void onenand_release(struct mtd_info *mtd)
 {
 }
-
-#endif /* CONFIG_CMD_ONENAND */

drivers/mtd/onenand/onenand_bbt.c

@@ -15,9 +15,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_CMD_ONENAND
-
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
@@ -261,5 +258,3 @@ int onenand_default_bbt(struct mtd_info *mtd)
 
 	return onenand_scan_bbt(mtd, bbm->badblock_pattern);
 }
-
-#endif /* CFG_CMD_ONENAND */

drivers/mtd/onenand/onenand_uboot.c

@@ -14,9 +14,6 @@
  */
 
 #include <common.h>
-
-#ifdef CONFIG_CMD_ONENAND
-
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/onenand.h>
@@ -37,5 +34,3 @@ void onenand_init(void)
 	puts("OneNAND: ");
 	print_size(onenand_mtd.size, "\n");
 }
-
-#endif	/* CONFIG_CMD_ONENAND */

drivers/pci/Makefile

@@ -25,15 +25,13 @@ include $(TOPDIR)/config.mk
 
 LIB	:= $(obj)libpci.a
 
-COBJS-y += fsl_pci_init.o
-COBJS-y += pci.o
-COBJS-y += pci_auto.o
-COBJS-y += pci_indirect.o
-COBJS-y += tsi108_pci.o
-COBJS-y += w83c553f.o
+COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_pci_init.o
+COBJS-$(CONFIG_PCI) += pci.o pci_auto.o pci_indirect.o
 COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o
 COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
 COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
+COBJS-$(CONFIG_TSI108_PCI) += tsi108_pci.o
+COBJS-$(CONFIG_WINBOND_83C553) += w83c553f.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/pci/fsl_pci_init.c

@@ -18,8 +18,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_FSL_PCI_INIT
-
 /*
  * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
  *
@@ -197,5 +195,3 @@ fsl_pci_init(struct pci_controller *hose)
 		pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
 	}
 }
-
-#endif /* CONFIG_FSL_PCI */

drivers/pci/pci.c

@@ -30,8 +30,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
-
 #include <command.h>
 #include <asm/processor.h>
 #include <asm/io.h>
@@ -544,5 +542,3 @@ void pci_init(void)
 	/* now call board specific pci_init()... */
 	pci_init_board();
 }
-
-#endif /* CONFIG_PCI */

drivers/pci/pci_auto.c

@@ -15,8 +15,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
-
 #include <pci.h>
 
 #undef DEBUG
@@ -408,5 +406,3 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
 
 	return sub_bus;
 }
-
-#endif /* CONFIG_PCI */

drivers/pci/pci_indirect.c

@@ -11,7 +11,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_PCI
 #if (!defined(__I386__) && !defined(CONFIG_IXDP425))
 
 #include <asm/processor.h>
@@ -135,4 +134,3 @@ void pci_setup_indirect(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
 }
 
 #endif	/* !__I386__ && !CONFIG_IXDP425 */
-#endif	/* CONFIG_PCI */

drivers/pci/tsi108_pci.c

@@ -27,8 +27,6 @@
 
 #include <config.h>
 
-#ifdef CONFIG_TSI108_PCI
-
 #include <common.h>
 #include <pci.h>
 #include <asm/io.h>
@@ -182,5 +180,3 @@ void ft_pci_setup(void *blob, bd_t *bd)
 	}
 }
 #endif /* CONFIG_OF_LIBFDT */
-
-#endif	/* CONFIG_TSI108_PCI */

drivers/pci/w83c553f.c

@@ -30,8 +30,6 @@
 #include <common.h>
 #include <config.h>
 
-#ifdef CFG_WINBOND_83C553
-
 #include <asm/io.h>
 #include <pci.h>
 
@@ -222,5 +220,3 @@ void initialise_dma(void)
 	out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
 	out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
 }
-
-#endif /* CFG_WINBOND_83C553 */

drivers/qe/Makefile

@@ -25,8 +25,9 @@ include $(TOPDIR)/config.mk
 LIB	:= $(obj)qe.a
 
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS	:= qe.o uccf.o uec.o uec_phy.o $(COBJS-y)
+COBJS-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 

drivers/qe/qe.c

@@ -27,7 +27,6 @@
 #include "asm/immap_qe.h"
 #include "qe.h"
 
-#if defined(CONFIG_QE)
 qe_map_t		*qe_immr = NULL;
 static qe_snum_t	snums[QE_NUM_OF_SNUM];
 
@@ -466,5 +465,3 @@ U_BOOT_CMD(
 	"fw <addr> [<length>] - Upload firmware binary at address <addr> to "
 		"the QE,\n\twith optional length <length> verification.\n"
 	);
-
-#endif /* CONFIG_QE */

drivers/qe/uccf.c

@@ -28,7 +28,6 @@
 #include "qe.h"
 #include "uccf.h"
 
-#if defined(CONFIG_QE)
 void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
 {
 	out_be16(&uccf->uf_regs->utodr, UCC_FAST_TOD);
@@ -401,4 +400,3 @@ int ucc_fast_init(ucc_fast_info_t *uf_info, ucc_fast_private_t  **uccf_ret)
 	*uccf_ret = uccf;
 	return 0;
 }
-#endif /* CONFIG_QE */

drivers/qe/uec.c

@@ -31,8 +31,6 @@
 #include "uec_phy.h"
 #include "miiphy.h"
 
-#if defined(CONFIG_QE)
-
 #ifdef CONFIG_UEC_ETH1
 static uec_info_t eth1_uec_info = {
 	.uf_info		= {
@@ -1406,6 +1404,3 @@ int uec_initialize(int index)
 
 	return 1;
 }
-
-
-#endif /* CONFIG_QE */

drivers/qe/uec_phy.c

@@ -26,8 +26,6 @@
 #include "uec_phy.h"
 #include "miiphy.h"
 
-#if defined(CONFIG_QE)
-
 #define ugphy_printk(format, arg...)  \
 	printf(format "\n", ## arg)
 
@@ -677,4 +675,3 @@ void change_phy_interface_mode (struct eth_device *dev, enet_interface_e mode)
 	marvell_phy_interface_mode (dev, mode);
 #endif
 }
-#endif /* CONFIG_QE */

drivers/serial/Makefile

@@ -27,7 +27,7 @@ LIB	:= $(obj)libserial.a
 
 COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o
 COBJS-$(CONFIG_MCFUART) += mcfuart.o
-COBJS-y += ns9750_serial.o
+COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
 COBJS-y += ns16550.o
 COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-y += serial.o
@@ -35,7 +35,7 @@ COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-y += serial_pl010.o
 COBJS-y += serial_pl011.o
 COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
-COBJS-y += serial_sh.o
+COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_USB_TTY) += usbtty.o
 
 COBJS	:= $(COBJS-y)

drivers/serial/ns9750_serial.c

@@ -28,8 +28,6 @@
 
 #include <common.h>
 
-#ifdef CFG_NS9750_UART
-
 #include "ns9750_bbus.h"	/* for GPIOs */
 #include "ns9750_ser.h"		/* for serial configuration */
 
@@ -210,5 +208,3 @@ static unsigned int calcRxCharGapRegister( void )
 {
 	return NS9750_SER_RX_CHAR_TIMER_TRUN;
 }
-
-#endif /* CFG_NS9750_UART */

drivers/serial/serial.c

@@ -26,7 +26,7 @@
 #ifdef CFG_NS16550_SERIAL
 
 #include <ns16550.h>
-#ifdef CFG_NS87308
+#ifdef CONFIG_NS87308
 #include <ns87308.h>
 #endif
 
@@ -159,7 +159,7 @@ int serial_init (void)
 {
 	int clock_divisor;
 
-#ifdef CFG_NS87308
+#ifdef CONFIG_NS87308
 	initialise_ns87308();
 #endif
 

drivers/serial/serial_sh.c

@@ -20,8 +20,6 @@
 #include <common.h>
 #include <asm/processor.h>
 
-#ifdef CFG_SCIF_CONSOLE
-
 #if defined (CONFIG_CONS_SCIF0)
 #define SCIF_BASE	SCIF0_BASE
 #elif defined (CONFIG_CONS_SCIF1)
@@ -215,5 +213,3 @@ int serial_getc(void)
 
 	return ch;
 }
-
-#endif /* CFG_SCIF_CONSOLE */

fs/jffs2/jffs2_1pass.c

@@ -146,7 +146,7 @@ static struct part_info *current_part;
 
 #if (defined(CONFIG_JFFS2_NAND) && \
      defined(CONFIG_CMD_NAND) )
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 #include <linux/mtd/nand_legacy.h>
 #else
 #include <nand.h>
@@ -161,7 +161,7 @@ static struct part_info *current_part;
  *
  */
 
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 /* this one defined in nand_legacy.c */
 int read_jffs2_nand(size_t start, size_t len,
 		size_t * retlen, u_char * buf, int nanddev);
@@ -201,7 +201,7 @@ static int read_nand_cached(u32 off, u32 size, u_char *buf)
 				}
 			}
 
-#if defined(CFG_NAND_LEGACY)
+#if defined(CONFIG_NAND_LEGACY)
 			if (read_jffs2_nand(nand_cache_off, NAND_CACHE_SIZE,
 						&retlen, nand_cache, id->num) < 0 ||
 					retlen != NAND_CACHE_SIZE) {

fs/jffs2/jffs2_nand_1pass.c

@@ -1,6 +1,6 @@
 #include <common.h>
 
-#if !defined(CFG_NAND_LEGACY) && defined(CONFIG_CMD_JFFS2)
+#if !defined(CONFIG_NAND_LEGACY) && defined(CONFIG_CMD_JFFS2)
 
 #include <malloc.h>
 #include <linux/stat.h>

include/configs/APC405.h

@@ -269,7 +269,7 @@ extern int flash_banks;
 
 #define CFG_FLASH_BASE		0xFE000000
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CFG_MAX_FLASH_SECT	256	/* max num of sects on one chip */
 #define CFG_MAX_FLASH_BANKS	flash_banks /* max num of flash banks */
 					    /* updated in board_early_init_r */

include/configs/ATUM8548.h

@@ -182,7 +182,7 @@
 
 #define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
-#define CFG_FLASH_CFI_DRIVER    1
+#define CONFIG_FLASH_CFI_DRIVER    1
 #define CFG_FLASH_CFI           1
 #define CFG_FLASH_EMPTY_INFO
 

include/configs/Adder.h

@@ -143,7 +143,7 @@
  */
 #define CFG_FLASH_BASE		0xFE000000
 #define CFG_FLASH_CFI				/* The flash is CFI compatible  */
-#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
 #define CFG_MAX_FLASH_BANKS	1		/* Max number of flash banks	*/
 #define CFG_MAX_FLASH_SECT	128		/* Max num of sects on one chip */