integratorap: split timer support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Peter Pearse <peter.pearse@arm.com>

board/armltd/integratorap/Makefile

@@ -34,6 +34,7 @@ SOBJS-y	:= lowlevel_init.o
 COBJS-y	:= integratorap.o
 COBJS-y	+= flash.o
 COBJS-$(CONFIG_PCI) += pci.o
+COBJS-y += timer.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 COBJS	:= $(addprefix $(obj),$(COBJS-y))

board/armltd/integratorap/integratorap.c

@@ -149,141 +149,6 @@ extern void dram_query(void);
 	return 0;
 }
 
-/* The Integrator/AP timer1 is clocked at 24MHz
- * can be divided by 16 or 256
- * and is a 16-bit counter
- */
-/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
-static ulong timestamp;		/* U-Boot ticks since startup	      */
-static ulong total_count = 0;	/* Total timer count		      */
-static ulong lastdec;		/* Timer reading at last call	      */
-static ulong div_clock	 = 256; /* Divisor applied to the timer clock */
-static ulong div_timer	 = 1;	/* Divisor to convert timer reading
-				 * change to U-Boot ticks
-				 */
-/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
-
-#define TIMER_LOAD_VAL 0x0000FFFFL
-#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
-
-/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
- *  - unless otherwise stated
- */
-
-/* starts a counter
- * - the Integrator/AP timer issues an interrupt
- *   each time it reaches zero
- */
-int timer_init (void)
-{
-	/* Load timer with initial value */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
-	/* Set timer to be
-	 *	enabled		  1
-	 *	free-running	  0
-	 *	XX		 00
-	 *	divider 256	 10
-	 *	XX		 00
-	 */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
-	total_count = 0;
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	div_timer  = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
-	div_timer /= div_clock;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base_ticks)
-{
-	return get_timer_masked () - base_ticks;
-}
-
-void set_timer (ulong ticks)
-{
-	timestamp = ticks;
-	total_count = ticks * div_timer;
-	reset_timer_masked();
-}
-
-/* delay x useconds */
-void udelay (unsigned long usec)
-{
-	ulong tmo, tmp;
-
-	/* Convert to U-Boot ticks */
-	tmo  = usec * CONFIG_SYS_HZ;
-	tmo /= (1000000L);
-
-	tmp  = get_timer_masked();	/* get current timestamp */
-	tmo += tmp;			/* wake up timestamp	 */
-
-	while (get_timer_masked () < tmo) { /* loop till event */
-		/*NOP*/;
-	}
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec	  = READ_TIMER; /* capture current decrementer value   */
-	timestamp = 0;		/* start "advancing" time stamp from 0 */
-}
-
-/* converts the timer reading to U-Boot ticks	       */
-/* the timestamp is the number of ticks since reset    */
-/* This routine does not detect wraps unless called regularly
-   ASSUMES a call at least every 16 seconds to detect every reload */
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;		/* current count */
-
-	if (now > lastdec) {
-		/* Must have wrapped */
-		total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
-	} else {
-		total_count += lastdec - now;
-	}
-	lastdec	  = now;
-	timestamp = total_count/div_timer;
-
-	return timestamp;
-}
-
-/* waits specified delay value and resets timestamp */
-void udelay_masked (unsigned long usec)
-{
-	udelay(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * Return the timebase clock frequency
- * i.e. how often the timer decrements
- */
-ulong get_tbclk (void)
-{
-	return CONFIG_SYS_HZ_CLOCK/div_clock;
-}
-
 int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);

board/armltd/integratorap/timer.c

@@ -0,0 +1,171 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* The Integrator/AP timer1 is clocked at 24MHz
+ * can be divided by 16 or 256
+ * and is a 16-bit counter
+ */
+/* U-Boot expects a 32 bit timer running at CONFIG_SYS_HZ*/
+static ulong timestamp;		/* U-Boot ticks since startup	      */
+static ulong total_count = 0;	/* Total timer count		      */
+static ulong lastdec;		/* Timer reading at last call	      */
+static ulong div_clock	 = 256; /* Divisor applied to the timer clock */
+static ulong div_timer	 = 1;	/* Divisor to convert timer reading
+				 * change to U-Boot ticks
+				 */
+/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */
+
+#define TIMER_LOAD_VAL 0x0000FFFFL
+#define READ_TIMER ((*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) & 0x0000FFFFL)
+
+/* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec
+ *  - unless otherwise stated
+ */
+
+/* starts a counter
+ * - the Integrator/AP timer issues an interrupt
+ *   each time it reaches zero
+ */
+int timer_init (void)
+{
+	/* Load timer with initial value */
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL;
+	/* Set timer to be
+	 *	enabled		  1
+	 *	free-running	  0
+	 *	XX		 00
+	 *	divider 256	 10
+	 *	XX		 00
+	 */
+	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088;
+	total_count = 0;
+	/* init the timestamp and lastdec value */
+	reset_timer_masked();
+
+	div_timer  = CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ;
+	div_timer /= div_clock;
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base_ticks)
+{
+	return get_timer_masked () - base_ticks;
+}
+
+void set_timer (ulong ticks)
+{
+	timestamp = ticks;
+	total_count = ticks * div_timer;
+	reset_timer_masked();
+}
+
+/* delay x useconds */
+void udelay (unsigned long usec)
+{
+	ulong tmo, tmp;
+
+	/* Convert to U-Boot ticks */
+	tmo  = usec * CONFIG_SYS_HZ;
+	tmo /= (1000000L);
+
+	tmp  = get_timer_masked();	/* get current timestamp */
+	tmo += tmp;			/* wake up timestamp	 */
+
+	while (get_timer_masked () < tmo) { /* loop till event */
+		/*NOP*/;
+	}
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec	  = READ_TIMER; /* capture current decrementer value   */
+	timestamp = 0;		/* start "advancing" time stamp from 0 */
+}
+
+/* converts the timer reading to U-Boot ticks	       */
+/* the timestamp is the number of ticks since reset    */
+/* This routine does not detect wraps unless called regularly
+   ASSUMES a call at least every 16 seconds to detect every reload */
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER;		/* current count */
+
+	if (now > lastdec) {
+		/* Must have wrapped */
+		total_count += lastdec + TIMER_LOAD_VAL + 1 - now;
+	} else {
+		total_count += lastdec - now;
+	}
+	lastdec	  = now;
+	timestamp = total_count/div_timer;
+
+	return timestamp;
+}
+
+/* waits specified delay value and resets timestamp */
+void udelay_masked (unsigned long usec)
+{
+	udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * Return the timebase clock frequency
+ * i.e. how often the timer decrements
+ */
+ulong get_tbclk (void)
+{
+	return CONFIG_SYS_HZ_CLOCK/div_clock;
+}