Makefile: move all Power Architecture boards into boards.cfg

Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk <wd@denx.de>

MAKEALL

@@ -63,122 +63,25 @@ LIST_5xx="$(boards_by_cpu mpc5xx)"
 ## MPC5xxx Systems
 #########################################################################
 
-LIST_5xxx="$(boards_by_cpu mpc5xxx)
-	digsy_mtc	\
-	EVAL5200	\
-	fo300		\
-	galaxy5200	\
-	icecube_5200	\
-	lite5200b	\
-	mcc200		\
-	MVBC_P		\
-	MVSMR		\
-	pcm030		\
-	PM520		\
-	TB5200		\
-	Total5200	\
-	Total5200_Rev2	\
-	TQM5200		\
-	TQM5200_B	\
-	TQM5200S	\
-"
+LIST_5xxx="$(boards_by_cpu mpc5xxx)"
 
 #########################################################################
 ## MPC512x Systems
 #########################################################################
 
-LIST_512x="$(boards_by_cpu mpc512x)
-	mpc5121ads	\
-"
+LIST_512x="$(boards_by_cpu mpc512x)"
 
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
 
-LIST_8xx="$(boards_by_cpu mpc8xx)
-	Adder87x	\
-	AdderII		\
-	ADS860		\
-	FADS823		\
-	FADS850SAR	\
-	FADS860T	\
-	FPS850L		\
-	GEN860T		\
-	GEN860T_SC	\
-	ICU862_100MHz	\
-	IVML24		\
-	IVML24_128	\
-	IVML24_256	\
-	IVMS8		\
-	IVMS8_128	\
-	IVMS8_256	\
-	MBX		\
-	MBX860T		\
-	MPC86xADS	\
-	MPC885ADS	\
-	NETPHONE	\
-	NETTA		\
-	NETTA2		\
-	NETTA_ISDN	\
-	NETVIA		\
-	NETVIA_V2	\
-	RPXlite_DW	\
-	SPD823TS	\
-	SXNI855T	\
-	TK885D		\
-	TQM823L		\
-	TQM823L_LCD	\
-	TQM850L		\
-	TQM855L		\
-	TQM860L		\
-	TQM885D		\
-	v37		\
-"
+LIST_8xx="$(boards_by_cpu mpc8xx)"
 
 #########################################################################
 ## PPC4xx Systems
 #########################################################################
 
-LIST_4xx="$(boards_by_cpu ppc4xx)
-	acadia_nand	\
-	arches		\
-	bamboo_nand	\
-	canyonlands	\
-	canyonlands_nand \
-	CPCI405		\
-	CPCI4052	\
-	CPCI405AB	\
-	CPCI405DT	\
-	devconcenter	\
-	fx12mm		\
-	glacier		\
-	haleakala	\
-	haleakala_nand	\
-	hcu4		\
-	hcu5		\
-	intip		\
-	kilauea		\
-	kilauea_nand	\
-	mcu25		\
-	MIP405T		\
-	ml507		\
-	ml507_flash	\
-	OCRTC		\
-	ORSG		\
-	PPChameleonEVB	\
-	rainier		\
-	sequoia		\
-	sequoia_nand	\
-	v5fx30teval	\
-	v5fx30teval_flash \
-	W7OLMC		\
-	W7OLMG		\
-	walnut		\
-	xilinx-ppc440-generic \
-	xilinx-ppc440-generic_flash \
-	yellowstone	\
-	yosemite	\
-"
+LIST_4xx="$(boards_by_cpu ppc4xx)"
 
 #########################################################################
 ## MPC8220 Systems
@@ -190,146 +93,37 @@ LIST_8220="$(boards_by_cpu mpc8220)"
 ## MPC824x Systems
 #########################################################################
 
-LIST_824x="$(boards_by_cpu mpc824x)
-	CPC45		\
-	eXalion		\
-	IDS8247		\
-	linkstation_HGLAN	\
-	Sandpoint8240	\
-	Sandpoint8245	\
-"
+LIST_824x="$(boards_by_cpu mpc824x)"
 
 #########################################################################
 ## MPC8260 Systems (includes 8250, 8255 etc.)
 #########################################################################
 
-LIST_8260="$(boards_by_cpu mpc8260)
-	cogent_mpc8260	\
-	CPU86		\
-	CPU87		\
-	ep8248		\
-	ISPAN		\
-	MPC8260ADS	\
-	MPC8272ADS	\
-	PM826		\
-	PM828		\
-	Rattler8248	\
-	TQM8260_AC	\
-	TQM8260_AD	\
-	TQM8260_AE	\
-"
+LIST_8260="$(boards_by_cpu mpc8260)"
 
 #########################################################################
 ## MPC83xx Systems (includes 8349, etc.)
 #########################################################################
 
-LIST_83xx="$(boards_by_cpu mpc83xx)
-	caddy2		\
-	MPC8313ERDB_33	\
-	MPC8313ERDB_NAND_66	\
-	MPC8315ERDB	\
-	MPC8315ERDB_NAND	\
-	MPC832XEMDS	\
-	MPC832XEMDS_ATM	\
-	MPC8349ITX	\
-	MPC8349ITXGP	\
-	MPC8360EMDS	\
-	MPC8360EMDS_ATM	\
-	MPC8360ERDK_33	\
-	MPC8360ERDK_66	\
-	MPC837XEMDS	\
-	sbc8349		\
-	SIMPC8313_LP	\
-	vme8349		\
-"
-
+LIST_83xx="$(boards_by_cpu mpc83xx)"
 
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
-LIST_85xx="$(boards_by_cpu mpc85xx)
-	MPC8536DS	\
-	MPC8536DS_NAND	\
-	MPC8536DS_SDCARD	\
-	MPC8536DS_SPIFLASH	\
-	MPC8536DS_36BIT	\
-	MPC8540EVAL	\
-	MPC8541CDS	\
-	MPC8548CDS	\
-	MPC8555CDS	\
-	MPC8569MDS	\
-	MPC8569MDS_ATM	\
-	MPC8569MDS_NAND \
-	MPC8572DS	\
-	MPC8572DS_36BIT	\
-	P2020DS		\
-	P2020DS_36BIT	\
-	P1011RDB	\
-	P1011RDB_NAND	\
-	P1011RDB_SDCARD	\
-	P1011RDB_SPIFLASH	\
-	P1020RDB	\
-	P1020RDB_NAND	\
-	P1020RDB_SDCARD	\
-	P1020RDB_SPIFLASH	\
-	P2010RDB	\
-	P2010RDB_NAND	\
-	P2010RDB_SDCARD	\
-	P2010RDB_SPIFLASH	\
-	P2020RDB	\
-	P2020RDB_NAND	\
-	P2020RDB_SDCARD	\
-	P2020RDB_SPIFLASH	\
-	sbc8540		\
-	sbc8548		\
-	sbc8548_PCI_33	\
-	sbc8548_PCI_66	\
-	sbc8548_PCI_33_PCIE \
-	sbc8548_PCI_66_PCIE \
-	sbc8560		\
-	stxssa		\
-	TQM8540		\
-	TQM8541		\
-	TQM8548		\
-	TQM8548_AG	\
-	TQM8548_BE	\
-	TQM8555		\
-	TQM8560		\
-"
+LIST_85xx="$(boards_by_cpu mpc85xx)"
 
 #########################################################################
 ## MPC86xx Systems
 #########################################################################
 
-LIST_86xx="$(boards_by_cpu mpc86xx)
-	MPC8641HPCN_36BIT \
-	MPC8641HPCN	\
-"
+LIST_86xx="$(boards_by_cpu mpc86xx)"
 
 #########################################################################
 ## 74xx/7xx Systems
 #########################################################################
 
-LIST_74xx="		\
-	DB64360		\
-	DB64460		\
-	EVB64260	\
-	mpc7448hpc2	\
-	P3G4		\
-	p3m7448		\
-	PCIPPC2		\
-	PCIPPC6		\
-	ZUMA		\
-"
-
-LIST_7xx="		\
-	BAB7xx		\
-	CPCI750		\
-	ELPPC		\
-	p3m750		\
-	ppmc7xx		\
-"
+LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
 
 #########################################################################
 ## PowerPC groups
@@ -353,8 +147,7 @@ LIST_powerpc="		\
 	${LIST_85xx}	\
 	${LIST_86xx}	\
 	${LIST_4xx}	\
-	${LIST_74xx}	\
-	${LIST_7xx}	\
+	${LIST_74xx_7xx}\
 "
 
 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts

Makefile

@@ -503,882 +503,6 @@ sinclude .boards.depend
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#========================================================================
-# PowerPC
-#========================================================================
-
-#########################################################################
-## MPC5xxx Systems
-#########################################################################
-
-digsy_mtc_config \
-digsy_mtc_LOWBOOT_config	\
-digsy_mtc_RAMBOOT_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/digsy_mtc
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
-	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
-	@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
-
-galaxy5200_LOWBOOT_config \
-galaxy5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
-
-Lite5200_config				\
-Lite5200_LOWBOOT_config			\
-Lite5200_LOWBOOT08_config		\
-icecube_5200_config			\
-icecube_5200_LOWBOOT_config		\
-icecube_5200_LOWBOOT08_config		\
-icecube_5200_DDR_config			\
-icecube_5200_DDR_LOWBOOT_config		\
-icecube_5200_DDR_LOWBOOT08_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		if [ "$(findstring DDR,$@)" ] ; \
-			then echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-			else echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		fi
-	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
-	@[ -z "$(findstring DDR,$@)" ] || \
-		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
-
-lite5200b_config	\
-lite5200b_PM_config	\
-lite5200b_LOWBOOT_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
-	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
-	@[ -z "$(findstring _PM_,$@)" ] || \
-		echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
-	@$(MKCONFIG) -n $@ -a IceCube  powerpc mpc5xxx icecube
-
-mcc200_config	\
-mcc200_SDRAM_config	\
-mcc200_highboot_config	\
-mcc200_COM12_config	\
-mcc200_COM12_SDRAM_config	\
-mcc200_COM12_highboot_config	\
-mcc200_COM12_highboot_SDRAM_config	\
-mcc200_highboot_SDRAM_config	\
-prs200_config	\
-prs200_DDR_config	\
-prs200_highboot_config	\
-prs200_highboot_DDR_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mcc200
-	@[ -z "$(findstring highboot,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
-	@[ -n "$(findstring _SDRAM,$@)" ] || \
-		if [ -n "$(findstring prs200,$@)" ]; \
-		then \
-			if [ -z "$(findstring _DDR,$@)" ];\
-			then \
-				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
-			fi; \
-		fi
-	@[ -z "$(findstring _SDRAM,$@)" ] || \
-		echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
-	@[ -z "$(findstring COM12,$@)" ] || \
-		echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
-	@[ -z "$(findstring prs200,$@)" ] || \
-		echo "#define CONFIG_PRS200" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
-
-MVBC_P_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mvbc_p
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring MVBC_P,$@)" ] || \
-		echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision
-
-MVSMR_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/matrix_vision/mvsmr
-	@$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision
-
-pcm030_config \
-pcm030_LOWBOOT_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/phytec/pcm030
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
-	@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
-
-PM520_config \
-PM520_DDR_config \
-PM520_ROMBOOT_config \
-PM520_ROMBOOT_DDR_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring DDR,$@)" ] || \
-		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
-	@[ -z "$(findstring ROMBOOT,$@)" ] || \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
-
-TB5200_B_config \
-TB5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _B,$@)" ] || \
-		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
-
-MINI5200_config	\
-EVAL5200_config	\
-TOP5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@ echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
-
-Total5200_config		\
-Total5200_lowboot_config	\
-Total5200_Rev2_config		\
-Total5200_Rev2_lowboot_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/total5200
-	@[ -n "$(findstring Rev,$@)" ] || \
-		echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
-	@[ -z "$(findstring Rev2_,$@)" ] || \
-		echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
-	@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
-
-cam5200_config \
-cam5200_niosflash_config \
-fo300_config \
-MiniFAP_config \
-TQM5200S_config \
-TQM5200S_HIGHBOOT_config \
-TQM5200_B_config \
-TQM5200_B_HIGHBOOT_config \
-TQM5200_config	\
-TQM5200_STK100_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/tqc/tqm5200
-	@[ -z "$(findstring cam5200,$@)" ] || \
-		{ echo "#define CONFIG_CAM5200"	  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring niosflash,$@)" ] || \
-		echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h
-	@[ -z "$(findstring fo300,$@)" ] || \
-		echo "#define CONFIG_FO300" >>$(obj)include/config.h
-	@[ -z "$(findstring MiniFAP,$@)" ] || \
-		echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
-	@[ -z "$(findstring STK100,$@)" ] || \
-		echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
-	@[ -z "$(findstring TQM5200_B,$@)" ] || \
-		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
-	@[ -z "$(findstring TQM5200S,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
-	@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
-
-#########################################################################
-## MPC512x Systems
-#########################################################################
-
-mpc5121ads_config \
-mpc5121ads_rev2_config	\
-	: unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring rev2,$@)" ] ; then \
-		echo "#define CONFIG_MPC5121ADS_REV2 1" > $(obj)include/config.h; \
-	fi
-	@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
-
-#########################################################################
-## MPC8xx Systems
-#########################################################################
-
-Adder87x_config \
-AdderII_config	\
-AdderUSB_config	\
-Adder_config	\
-	:		unconfig
-	@mkdir -p $(obj)include
-	$(if $(findstring AdderII,$@), \
-		@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
-	@$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
-
-ADS860_config	  \
-FADS823_config	  \
-FADS850SAR_config \
-MPC86xADS_config  \
-MPC885ADS_config  \
-FADS860T_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads
-
-GEN860T_SC_config	\
-GEN860T_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _SC,$@)" ] || \
-		echo "#define CONFIG_SC" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t
-
-ICU862_100MHz_config	\
-ICU862_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _100MHz,$@)" ] || \
-		echo "#define CONFIG_100MHz" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862
-
-IVML24_256_config \
-IVML24_128_config \
-IVML24_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring IVML24_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
-	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
-	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
-
-IVMS8_256_config \
-IVMS8_128_config \
-IVMS8_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring IVMS8_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h
-	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h
-	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
-
-MBX_config	\
-MBX860T_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx
-
-NETVIA_V2_config \
-NETVIA_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETVIA_config,$@)" ] || \
-		echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia
-
-NETPHONE_V2_config \
-NETPHONE_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
-		echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone
-
-NETTA_ISDN_6412_SWAPHOOK_config \
-NETTA_ISDN_SWAPHOOK_config \
-NETTA_6412_SWAPHOOK_config \
-NETTA_SWAPHOOK_config \
-NETTA_ISDN_6412_config \
-NETTA_ISDN_config \
-NETTA_6412_config \
-NETTA_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring ISDN_,$@)" ] || \
-		echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
-	@[ -n "$(findstring ISDN_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
-	@[ -z "$(findstring 6412_,$@)" ] || \
-		echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
-	@[ -n "$(findstring 6412_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
-	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
-		echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
-	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta
-
-NETTA2_V2_config \
-NETTA2_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETTA2_config,$@)" ] || \
-		echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2
-
-NC650_Rev1_config \
-NC650_Rev2_config \
-CP850_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring CP850,$@)" ] || \
-		{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring Rev1,$@)" ] || \
-		{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring Rev2,$@)" ] || \
-		{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		}
-	@$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
-
-RPXlite_DW_64_config		\
-RPXlite_DW_LCD_config		\
-RPXlite_DW_64_LCD_config	\
-RPXlite_DW_NVRAM_config		\
-RPXlite_DW_NVRAM_64_config	\
-RPXlite_DW_NVRAM_LCD_config	\
-RPXlite_DW_NVRAM_64_LCD_config	\
-RPXlite_DW_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _64,$@)" ] || \
-		echo "#define RPXlite_64MHz"		>>$(obj)include/config.h
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
-
-RRvision_LCD_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
-
-SPD823TS_config:	unconfig
-	@$(MKCONFIG) $@ powerpc mpc8xx spd8xx
-
-SXNI855T_config:	unconfig
-	@$(MKCONFIG) $@ powerpc mpc8xx sixnet
-
-# Play some tricks for configuration selection
-# Only 855 and 860 boards may come with FEC
-# and only 823 boards may have LCD support
-xtract_8xx = $(subst _LCD,,$1)
-
-FPS850L_config		\
-FPS860L_config		\
-NSCU_config		\
-TQM823L_config		\
-TQM823L_LCD_config	\
-TQM850L_config		\
-TQM855L_config		\
-TQM860L_config		\
-TQM862L_config		\
-TQM823M_config		\
-TQM850M_config		\
-TQM855M_config		\
-TQM860M_config		\
-TQM862M_config		\
-TQM866M_config		\
-TQM885D_config		\
-TK885D_config		\
-virtlab2_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		}
-	@$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
-
-TTTech_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
-
-v37_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
-	@$(MKCONFIG) $@ powerpc mpc8xx v37
-
-wtk_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
-
-#########################################################################
-## PPC4xx Systems
-#########################################################################
-
-acadia_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/acadia
-	@mkdir -p $(obj)nand_spl/board/amcc/acadia
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
-
-bamboo_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
-	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
-
-# Arches, Canyonlands & Glacier use different U-Boot images
-arches_config \
-canyonlands_config \
-glacier_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
-
-canyonlands_nand_config \
-glacier_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
-	@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
-
-CATcenter_config	\
-CATcenter_25_config	\
-CATcenter_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
-	@echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
-	@[ -z "$(findstring _25,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
-	@[ -z "$(findstring _33,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave
-
-CPCI405_config		\
-CPCI4052_config		\
-CPCI405DT_config	\
-CPCI405AB_config:	unconfig
-	@mkdir -p $(obj)board/esd/cpci405
-	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd
-
-fx12mm_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
-		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFFCB0000" \
-		>> $(obj)board/avnet/fx12mm/config.tmp
-	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
-
-fx12mm_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
-		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
-		>> $(obj)board/avnet/fx12mm/config.tmp
-	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
-
-# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
-intip_config \
-devconcenter_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
-
-hcu4_config    \
-hcu5_config    \
-mcu25_config:  unconfig
-	@mkdir -p $(obj)board/netstal/common
-	@$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal
-
-# Kilauea & Haleakala images are identical (recognized via PVR)
-kilauea_config \
-haleakala_config: unconfig
-	@$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc
-
-kilauea_nand_config \
-haleakala_nand_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
-	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
-
-MIP405T_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
-	@$(XECHO) "Enable subset config for MIP405T"
-	@$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
-
-ml507_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
-
-ml507_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000"  \
-		>> $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
-
-OCRTC_config		\
-ORSG_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd
-
-PPChameleonEVB_config		\
-PPChameleonEVB_BA_25_config	\
-PPChameleonEVB_ME_25_config	\
-PPChameleonEVB_HI_25_config	\
-PPChameleonEVB_BA_33_config	\
-PPChameleonEVB_ME_33_config	\
-PPChameleonEVB_HI_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring EVB_BA,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
-	@[ -z "$(findstring EVB_ME,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
-	@[ -z "$(findstring EVB_HI,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
-	@[ -z "$(findstring _25,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
-	@[ -z "$(findstring _33,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
-
-sequoia_config \
-rainier_config: unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-sequoia_nand_config \
-rainier_nand_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
-	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-sequoia_ramboot_config \
-rainier_ramboot_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
-	@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
-	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
-		$(obj)board/amcc/sequoia/config.tmp
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-v5fx30teval_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
-		>> $(obj)board/avnet/v5fx30teval/config.tmp
-	@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
-
-v5fx30teval_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFF1C0000" \
-		>> $(obj)board/avnet/v5fx30teval/config.tmp
-	@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
-
-W7OLMC_config	\
-W7OLMG_config: unconfig
-	@$(MKCONFIG) $@ powerpc ppc4xx w7o
-
-# Walnut & Sycamore images are identical (recognized via PVR)
-walnut_config \
-sycamore_config: unconfig
-	@$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc
-
-xilinx-ppc405-generic_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
-
-xilinx-ppc405-generic_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
-		>> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
-
-xilinx-ppc440-generic_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
-
-xilinx-ppc440-generic_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
-		>> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
-
-yosemite_config \
-yellowstone_config: unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
-
-#########################################################################
-## MPC824x Systems
-#########################################################################
-
-eXalion_config: unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
-
-CPC45_config	\
-CPC45_ROMBOOT_config:	unconfig
-	@mkdir -p $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45
-
-# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
-# time permits.
-#linkstation_HDLAN_config \
-# Remove this line when HDLAN is fixed
-linkstation_HGLAN_config: unconfig
-	@mkdir -p $(obj)include
-	@case $@ in \
-		*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
-		*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
-	esac
-	@$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
-
-Sandpoint8240_config: unconfig
-	@$(MKCONFIG) $@ powerpc mpc824x sandpoint
-
-Sandpoint8245_config: unconfig
-	@$(MKCONFIG) $@ powerpc mpc824x sandpoint
-
-#########################################################################
-## MPC8260 Systems
-#########################################################################
-
-cogent_mpc8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
-
-CPU86_config	\
-CPU86_ROMBOOT_config: unconfig
-	@mkdir -p  $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86
-
-CPU87_config	\
-CPU87_ROMBOOT_config: unconfig
-	@mkdir -p $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87
-
-ep8248_config	\
-ep8248E_config	:	unconfig
-	@$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
-
-ISPAN_config		\
-ISPAN_REVB_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _REVB_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
-
-MPC8260ADS_config	\
-MPC8260ADS_lowboot_config	\
-MPC8260ADS_33MHz_config	\
-MPC8260ADS_33MHz_lowboot_config	\
-MPC8260ADS_40MHz_config	\
-MPC8260ADS_40MHz_lowboot_config	\
-MPC8272ADS_config	\
-MPC8272ADS_lowboot_config	\
-PQ2FADS_config		\
-PQ2FADS_lowboot_config		\
-PQ2FADS-VR_config	\
-PQ2FADS-VR_lowboot_config	\
-PQ2FADS-ZU_config	\
-PQ2FADS-ZU_lowboot_config	\
-PQ2FADS-ZU_66MHz_config	\
-PQ2FADS-ZU_66MHz_lowboot_config	\
-	:		unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8260ads
-	$(if $(findstring PQ2FADS,$@), \
-	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
-	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
-	$(if $(findstring MHz,$@), \
-	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
-	$(if $(findstring VR,$@), \
-	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
-	@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
-
-muas3001_dev_config \
-muas3001_config	:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/muas3001
-	@if [ "$(findstring dev,$@)" ] ; then \
-		echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
-
-# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
-PM825_config	\
-PM825_ROMBOOT_config	\
-PM825_BIGFLASH_config	\
-PM825_ROMBOOT_BIGFLASH_config	\
-PM826_config	\
-PM826_ROMBOOT_config	\
-PM826_BIGFLASH_config	\
-PM826_ROMBOOT_BIGFLASH_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring PM825_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"	>$(obj)include/config.h ; \
-	else \
-		>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-		fi; \
-	else \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			$(XECHO) "... with 32 MB Flash" ; \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-			echo "CONFIG_SYS_TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
-		else \
-			echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
-		fi; \
-	fi
-	@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
-
-PM828_config	\
-PM828_PCI_config	\
-PM828_ROMBOOT_config	\
-PM828_ROMBOOT_PCI_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring _PCI_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-	fi
-	@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
-
-Rattler8248_config	\
-Rattler_config:		unconfig
-	@mkdir -p $(obj)include
-	$(if $(findstring 8248,$@), \
-		@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
-	@$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
-
-TQM8255_AA_config \
-TQM8260_AA_config \
-TQM8260_AB_config \
-TQM8260_AC_config \
-TQM8260_AD_config \
-TQM8260_AE_config \
-TQM8260_AF_config \
-TQM8260_AG_config \
-TQM8260_AH_config \
-TQM8260_AI_config \
-TQM8265_AA_config:  unconfig
-	@mkdir -p $(obj)include
-	@case "$@" in \
-	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
-	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
-	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
-	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
-	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	esac; \
-	if [ "$${CTYPE}" != "MPC8260" ] ; then \
-		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
-	fi; \
-	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
-	if [ "$${CACHE}" = "yes" ] ; then \
-		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-	else \
-		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-	fi; \
-	if [ "$${BMODE}" = "60x" ] ; then \
-		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
-	else \
-		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
-
-VoVPN-GW_66MHz_config	\
-VoVPN-GW_100MHz_config:		unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
-
 #########################################################################
 ## Coldfire
 #########################################################################
@@ -1585,299 +709,6 @@ M5485HFE_config :	unconfig
 	fi
 	@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
 
-#########################################################################
-## MPC83xx Systems
-#########################################################################
-
-MPC8313ERDB_33_config \
-MPC8313ERDB_66_config \
-MPC8313ERDB_NAND_33_config \
-MPC8313ERDB_NAND_66_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8313erdb
-	@if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _NAND_,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
-		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
-	fi ;
-	@if [ "$(findstring _NAND_,$@)" ] ; then \
-		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
-
-MPC8315ERDB_NAND_config \
-MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
-
-MPC832XEMDS_config \
-MPC832XEMDS_HOST_33_config \
-MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config \
-MPC832XEMDS_ATM_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define PCI_33M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _ATM_,$@)" ] ; then \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
-
-MPC8349ITX_config \
-MPC8349ITX_LOWBOOT_config \
-MPC8349ITXGP_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8349itx
-	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
-	@if [ "$(findstring GP,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
-	fi
-	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
-
-MPC8360EMDS_config \
-MPC8360EMDS_HOST_33_config \
-MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config \
-MPC8360EMDS_ATM_config: unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define PCI_33M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _ATM_,$@)" ] ; then \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
-
-MPC8360ERDK_33_config \
-MPC8360ERDK_66_config \
-MPC8360ERDK_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
-
-MPC837XEMDS_config \
-MPC837XEMDS_HOST_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
-
-sbc8349_config \
-sbc8349_PCI_33_config \
-sbc8349_PCI_66_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349
-
-SIMPC8313_LP_config \
-SIMPC8313_SP_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/sheldon/simpc8313
-	@if [ "$(findstring _LP_,$@)" ] ; then \
-		echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SP_,$@)" ] ; then \
-		echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
-	fi ;
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
-
-caddy2_config \
-vme8349_config:		unconfig
-	@$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd
-
-#########################################################################
-## MPC85xx Systems
-#########################################################################
-
-MPC8536DS_NAND_config \
-MPC8536DS_SDCARD_config \
-MPC8536DS_SPIFLASH_config \
-MPC8536DS_36BIT_config \
-MPC8536DS_config:       unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale
-
-MPC8540EVAL_config \
-MPC8540EVAL_33_config \
-MPC8540EVAL_66_config \
-MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ -z "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _slave_,$@)" ] ; then \
-		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
-
-MPC8541CDS_legacy_config \
-MPC8541CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
-
-MPC8548CDS_legacy_config \
-MPC8548CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
-
-MPC8555CDS_legacy_config \
-MPC8555CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
-
-MPC8569MDS_ATM_config \
-MPC8569MDS_NAND_config \
-MPC8569MDS_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale
-
-MPC8572DS_36BIT_config \
-MPC8572DS_config:       unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale
-
-P2020DS_36BIT_config \
-P2020DS_config:		unconfig
-	@$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale
-
-P1011RDB_config	\
-P1011RDB_NAND_config \
-P1011RDB_SDCARD_config \
-P1011RDB_SPIFLASH_config \
-P1020RDB_config	\
-P1020RDB_NAND_config \
-P1020RDB_SDCARD_config \
-P1020RDB_SPIFLASH_config \
-P2010RDB_config \
-P2010RDB_NAND_config \
-P2010RDB_SDCARD_config \
-P2010RDB_SPIFLASH_config \
-P2020DS_DDR2_config \
-P2020RDB_config \
-P2020RDB_NAND_config \
-P2020RDB_SDCARD_config \
-P2020RDB_SPIFLASH_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
-
-sbc8540_config \
-sbc8540_33_config \
-sbc8540_66_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560
-
-sbc8548_config \
-sbc8548_PCI_33_config \
-sbc8548_PCI_66_config \
-sbc8548_PCI_33_PCIE_config \
-sbc8548_PCI_66_PCIE_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548
-
-sbc8560_config \
-sbc8560_33_config \
-sbc8560_66_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560
-
-stxssa_config		\
-stxssa_4M_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _4M_,$@)" ] ; then \
-		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
-
-TQM8540_config		\
-TQM8541_config		\
-TQM8548_config		\
-TQM8548_AG_config	\
-TQM8548_BE_config	\
-TQM8555_config		\
-TQM8560_config:		unconfig
-	@mkdir -p $(obj)include
-	@BTYPE=$(@:_config=); \
-	CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
-	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
-	@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
-
-#########################################################################
-## MPC86xx Systems
-#########################################################################
-
-MPC8641HPCN_36BIT_config \
-MPC8641HPCN_config:    unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _36BIT_,$@)" ] ; then \
-		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
-
-#########################################################################
-## 74xx/7xx Systems
-#########################################################################
-
-EVB64260_config	\
-EVB64260_750CX_config:	unconfig
-	@$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
-
-p3m750_config	\
-p3m7448_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring 750_,$@)" ] ; then \
-		echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
-
-PCIPPC2_config \
-PCIPPC6_config: unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2
-
 #========================================================================
 # ARM
 #========================================================================

board/LEOX/elpt860/config.mk

@@ -1,36 +0,0 @@
-#######################################################################
-#
-# Copyright (C) 2000, 2001, 2002, 2003
-# The LEOX team <team@leox.org>, http://www.leox.org
-#
-# LEOX.org is about the development of free hardware and software resources
-#   for system on chip.
-#
-# Description: U-Boot port on the LEOX's ELPT860 CPU board
-# ~~~~~~~~~~~
-#
-#######################################################################
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#######################################################################
-
-#
-# ELPT860 board
-#
-
-CONFIG_SYS_TEXT_BASE = 0x02000000
-#CONFIG_SYS_TEXT_BASE = 0x00FB0000

board/Marvell/db64360/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EVB64360 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfff00000

board/Marvell/db64460/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EVB64460 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfff00000

board/RPXClassic/config.mk

@@ -1,29 +0,0 @@
-#
-# (C)  Copyright 2001
-# Stäubli Faverges - <www.staubli.com>
-# Pierre AUBERT  p.aubert@staubli.com
-# U-Boot port on RPXClassic LF (CLLF_BW31) board
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xff000000

board/RPXlite/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# RPXlite boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfff00000

board/RPXlite_dw/config.mk

@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# RPXlite dw boards : lite_dw
-#
-
-CONFIG_SYS_TEXT_BASE = 0xff000000

board/RRvision/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# RedRock vision boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0x40000000

board/a3000/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Artis A-3000 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/adder/config.mk

@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2004 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Analogue&Micro Adder boards family
-#
-CONFIG_SYS_TEXT_BASE = 0xFE000000

board/alaska/config.mk

@@ -25,8 +25,4 @@
 # alaska board
 #
 
-CONFIG_SYS_TEXT_BASE = 0xfff00000
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/amcc/acadia/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2007
+# (C) Copyright 2007-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -25,16 +25,13 @@
 # AMCC 405EZ Reference Platform (Acadia) board
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFF80000
-endif
-
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
-ifdef CONFIG_NAND_U_BOOT
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_U_BOOT
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 endif

board/amcc/bamboo/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002-2007
+# (C) Copyright 2002-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,12 +21,6 @@
 # MA 02111-1307 USA
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)
@@ -37,6 +31,9 @@ ifeq ($(dbcr),1)
 PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
 
-ifdef CONFIG_NAND_U_BOOT
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_U_BOOT
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 endif

board/amcc/bluestone/config.mk

@@ -23,12 +23,6 @@
 # Applied Micro APM821XX Evaluation board.
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/bubinga/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/canyonlands/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2008
+# (C) Copyright 2008-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -24,12 +24,6 @@
 # AMCC 460EX/460GT Evaluation Board (Canyonlands) board
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFF80000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)
@@ -40,6 +34,9 @@ ifeq ($(dbcr),1)
 PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
 
-ifdef CONFIG_NAND_U_BOOT
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_U_BOOT
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 endif

board/amcc/ebony/config.mk

@@ -21,18 +21,6 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0x07FD0000
-else
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/katmai/config.mk

@@ -25,8 +25,6 @@
 # AMCC 440SPe Evaluation (Katmai) board
 #
 
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/kilauea/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2007
+# (C) Copyright 2007-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,16 +21,13 @@
 # MA 02111-1307 USA
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000
-endif
-
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif
 
-ifdef CONFIG_NAND_U_BOOT
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_U_BOOT
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 endif

board/amcc/luan/config.mk

@@ -21,18 +21,6 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0x00001000
-
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0xFBD00000
-else
-CONFIG_SYS_TEXT_BASE = 0xFFFB0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/makalu/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000

board/amcc/ocotea/config.mk

@@ -25,14 +25,6 @@
 # AMCC 440GX Reference Platform (Ocotea) board
 #
 
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0x07FD0000
-else
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/redwood/config.mk

@@ -25,12 +25,6 @@
 # AMCC 460SX Reference Platform (redwood) board
 #
 
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0x07FD0000
-else
-CONFIG_SYS_TEXT_BASE = 0xfffb0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/sequoia/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2002-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -24,12 +24,6 @@
 # AMCC 440EPx Reference Platform (Sequoia) board
 #
 
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFF80000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)
@@ -40,6 +34,9 @@ ifeq ($(dbcr),1)
 PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
 endif
 
-ifdef CONFIG_NAND_U_BOOT
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+else ifdef CONFIG_NAND_U_BOOT
 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 endif

board/amcc/taihu/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/taishan/config.mk

@@ -25,14 +25,6 @@
 # AMCC 440GX Reference Platform (Taishan) board
 #
 
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0x07FD0000
-else
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/walnut/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/amcc/yosemite/config.mk

@@ -21,18 +21,6 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0x00001000
-
-ifeq ($(ramsym),1)
-CONFIG_SYS_TEXT_BASE = 0xFBD00000
-else
-CONFIG_SYS_TEXT_BASE = 0xFFF80000
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amirix/ap1000/config.mk

@@ -21,10 +21,5 @@
 # MA 02111-1307 USA
 #
 
-# Start at bottom of RAM, but at an aliased address so that it looks
-# like it's not in RAM.  This is a bit of voodoo to allow it to be
-# run from RAM instead of Flash.
-CONFIG_SYS_TEXT_BASE = 0x08000000
-
 # Use board specific linker script
 LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds

board/atc/config.mk

@@ -25,15 +25,4 @@
 # ATC boards
 #
 
-# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_atc.h
-# for the "final" configuration, with U-Boot in flash, or the address
-# in RAM where U-Boot is loaded at for debugging.
-#
-
-CONFIG_SYS_TEXT_BASE := 0xFF000000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE := 0x100000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/atum8548/config.mk

@@ -1,29 +0,0 @@
-#
-# Copyright 2004, 2007 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# atum8548 board
-# CONFIG_SYS_TEXT_BASE = 0xfff80000
-# CONFIG_SYS_TEXT_BASE = 0xfffff000
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xfff80000
-endif

board/avnet/fx12mm/config.mk

@@ -23,4 +23,7 @@
 #
 #
 
-sinclude $(SRCTREE)/board/xilinx/ppc405-generic/config.mk
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+endif

board/avnet/v5fx30teval/config.mk

@@ -23,4 +23,7 @@
 #
 #
 
-sinclude $(SRCTREE)/board/xilinx/ppc440-generic/config.mk
+ifdef CONFIG_SYS_LDSCRIPT
+# need to strip off double quotes
+LDSCRIPT := $(subst ",,$(CONFIG_SYS_LDSCRIPT))
+endif

board/barco/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Barco Hydra/SCN boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/bc3450/config.mk

@@ -21,22 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# BC3450 board:
-#
-#	Valid values for CONFIG_SYS_TEXT_BASE are:
-#
-#	0xFC000000   boot low (standard configuration with room for max 64 MByte
-#		     Flash ROM)
-#	0x00100000   boot from RAM (for testing only)
-#
-
-ifndef CONFIG_SYS_TEXT_BASE
-## Standard: boot low
-CONFIG_SYS_TEXT_BASE = 0xFC000000
-## For testing: boot from RAM
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/bmw/config.mk

@@ -22,11 +22,9 @@
 #
 
 #
-# CU824 board
+# BMW board
 #
 
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
 # NOTE: The flags below affect how the BCM570x driver is compiled
 PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
-		     -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256\
-		     -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
+		     -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256

board/c2mon/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TTTech C2MON boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0x40000000

board/canmb/config.mk

@@ -27,14 +27,5 @@
 #
 # CANMB board
 #
-# allowed and functional CONFIG_SYS_TEXT_BASE values:
-#
-#   0xfe000000		low boot at 0x00000100 (default board setting)
-#	0x00100000		RAM load and test
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-#CONFIG_SYS_TEXT_BASE = 0x00100000
 
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/cm5200/config.mk

@@ -21,7 +21,4 @@
 # MA 02111-1307 USA
 #
 
-CONFIG_SYS_TEXT_BASE = 0xfc000000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/cmi/config.mk

@@ -22,11 +22,7 @@
 #
 
 #
-# EPQ Board Configuration
+# CMI Board Configuration
 #
 
-# Boot from flash at location 0x00000000
-CONFIG_SYS_TEXT_BASE = 0x02000000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/cogent/config.mk

@@ -25,10 +25,6 @@
 # Cogent Modular Architecture
 #
 
-# Boot EPROM location
-CONFIG_SYS_TEXT_BASE = 0xfff00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)
 
 LDSCRIPT := $(SRCTREE)/board/cogent/u-boot.lds

board/cpc45/config.mk

@@ -25,13 +25,4 @@
 # CPC45 board
 #
 
-
-ifeq ($(CONFIG_BOOT_ROM),y)
-	CONFIG_SYS_TEXT_BASE := 0xFFF00000
-	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
-else
-	CONFIG_SYS_TEXT_BASE := 0xFFF00000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/cpu86/config.mk

@@ -25,17 +25,4 @@
 # CPU86 boards
 #
 
-# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_CPU86.h
-# for the "final" configuration, with U-Boot in flash, or the address
-# in RAM where U-Boot is loaded at for debugging.
-#
-
-ifeq ($(CONFIG_BOOT_ROM),y)
-	CONFIG_SYS_TEXT_BASE := 0xFF800000
-	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
-else
-	CONFIG_SYS_TEXT_BASE := 0xFF000000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/cpu87/config.mk

@@ -25,17 +25,4 @@
 # CPU87 board
 #
 
-# This should be equal to the CONFIG_SYS_FLASH_BASE define in configs/cpu87.h
-# for the "final" configuration, with U-Boot in flash, or the address
-# in RAM where U-Boot is loaded at for debugging.
-#
-
-ifeq ($(CONFIG_BOOT_ROM),y)
-	CONFIG_SYS_TEXT_BASE := 0xFF800000
-	PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
-else
-	CONFIG_SYS_TEXT_BASE := 0xFF000000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/cray/L1/config.mk

@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Note: I make an "image" from U-Boot itself, which prefixes 0x40 bytes of
-# header info, hence start address is thus shifted.
-CONFIG_SYS_TEXT_BASE = 0xFFFD0040

board/csb272/config.mk

@@ -29,8 +29,3 @@
 #
 
 LDFLAGS += $(LINKER_UNDEFS)
-
-CONFIG_SYS_TEXT_BASE := 0xFFFC0000
-#CONFIG_SYS_TEXT_BASE := 0x00100000
-
-PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)

board/csb472/config.mk

@@ -29,8 +29,3 @@
 #
 
 LDFLAGS += $(LINKER_UNDEFS)
-
-CONFIG_SYS_TEXT_BASE := 0xFFFC0000
-#CONFIG_SYS_TEXT_BASE := 0x00100000
-
-PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)

board/cu824/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# CU824 board
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/dave/PPChameleonEVB/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000, 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Reserve 256 kB for Monitor
-#CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-
-# Reserve 320 kB for Monitor
-CONFIG_SYS_TEXT_BASE = 0xFFFB0000

board/davedenx/aria/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE  =   0xFFF00000

board/digsy_mtc/config.mk

@@ -5,21 +5,5 @@
 #
 # digsyMTC board:
 #
-#	Valid values for CONFIG_SYS_TEXT_BASE are:
-#
-#	0xFFF00000   boot high (standard configuration)
-#	0xFE000000   boot low
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-## Standard: boot high
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-endif
 
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/eXalion/config.mk

@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Sandpoint boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0x00090000
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/eltec/bab7xx/config.mk

@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/eltec/elppc/config.mk

@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/eltec/mhpc/config.mk

@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# MHPC boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfe000000
-/*CONFIG_SYS_TEXT_BASE  = 0x00200000 */

board/emk/top5200/config.mk

@@ -27,16 +27,5 @@
 #
 # TOP5200 board, on optional MINI5200 and EVAL5200 boards
 #
-# allowed and functional CONFIG_SYS_TEXT_BASE values:
-#
-#   0xff000000		low boot at 0x00000100 (default board setting)
-#   0xfff00000		high boot at 0xfff00100 (board needs modification)
-#	0x00100000		RAM load and test
-#
-
-CONFIG_SYS_TEXT_BASE = 0xff000000
-#CONFIG_SYS_TEXT_BASE = 0xfff00000
-#CONFIG_SYS_TEXT_BASE = 0x00100000
 
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/emk/top860/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TOP860 board
-#
-
-CONFIG_SYS_TEXT_BASE = 0x80000000

board/ep8248/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Modified by, Yuli Barcohen, Arabella Software Ltd. <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EP82xx series boards by Embedded Planet
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000

board/ep8260/config.mk

@@ -25,13 +25,4 @@
 # EP8260 boards
 #
 
-# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_ep8260.h
-# for the "final" configuration, with U-Boot in flash, or the address
-# in RAM where U-Boot is loaded at for debugging.
-#
-#CONFIG_SYS_TEXT_BASE = 0x00100000
-#CONFIG_SYS_TEXT_BASE = 0xFF000000
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)
+PLATFORM_CPPFLAGS += -I$(TOPDIR)

board/ep82xxm/config.mk

@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# EP82xxM series boards by Embedded Planet
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000

board/ep88x/config.mk

@@ -1,27 +0,0 @@
-#
-# Copyright (C) 2005 Arabella Software Ltd.
-# Yuli Barcohen <yuli@arabellasw.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Embedded Planet EP88x boards
-#
-CONFIG_SYS_TEXT_BASE = 0xFC000000

board/eric/config.mk

@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFF80000
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/adciop/config.mk

@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-# FLASH:
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-CONFIG_SYS_TEXT_BASE = 0xFFFD0000
-
-# SDRAM:
-#CONFIG_SYS_TEXT_BASE = 0x00FE0000

board/esd/apc405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ABG405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF80000

board/esd/ar405/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000

board/esd/ash405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ASH405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/canbt/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/cms700/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_SYS_TEXT_BASE = 0xFFFC8000

board/esd/cpci2dp/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd CPCI2DP board
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/cpci405/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/cpci5200/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2003
+# (C) Copyright 2003-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,25 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# IceCube board:
-#
-#	Valid values for CONFIG_SYS_TEXT_BASE are:
-#
-#	0xFFF00000   boot high (standard configuration)
-#	0xFF000000   boot low for 16 MiB boards
-#	0xFF800000   boot low for  8 MiB boards
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-## Standard: boot high
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/esd/cpci750/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2004
-# Reinhard Arlt <reinhard.arlt@esd-electronics.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# cpci750 board
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfff00000

board/esd/cpciiser4/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd CPCIISER4 boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-#CONFIG_SYS_TEXT_BASE = 0xFFFD0000
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/dasa_sim/config.mk

@@ -20,7 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000
 
 # Use board specific linker script
 LDSCRIPT := $(SRCTREE)/board/esd/dasa_sim/u-boot.lds

board/esd/dp405/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFD0000

board/esd/du405/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd CPCIISER4 boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-CONFIG_SYS_TEXT_BASE = 0xFFFD0000
-#CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/du440/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2002-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -20,11 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFFA0000
-endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 

board/esd/hh405/config.mk

@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd VOH405 boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFF00000
-CONFIG_SYS_TEXT_BASE = 0xFFF80000
-#CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-#CONFIG_SYS_TEXT_BASE = 0x00FC0000

board/esd/hub405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd HUB405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/mecp5123/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2009 Wolfgang Denk <wd@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE  =   0xFFF00000

board/esd/mecp5200/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2003
+# (C) Copyright 2003-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,25 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# IceCube board:
-#
-#	Valid values for CONFIG_SYS_TEXT_BASE are:
-#
-#	0xFFF00000   boot high (standard configuration)
-#	0xFF000000   boot low for 16 MiB boards
-#	0xFF800000   boot low for  8 MiB boards
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-## Standard: boot high
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/esd/ocrtc/config.mk

@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-CONFIG_SYS_TEXT_BASE = 0xFFFD0000

board/esd/pci405/config.mk

@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ADCIOP boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
-CONFIG_SYS_TEXT_BASE = 0xFFFD0000

board/esd/pf5200/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2003
+# (C) Copyright 2003-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,25 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# IceCube board:
-#
-#	Valid values for CONFIG_SYS_TEXT_BASE are:
-#
-#	0xFFF00000   boot high (standard configuration)
-#	0xFF000000   boot low for 16 MiB boards
-#	0xFF800000   boot low for  8 MiB boards
-#	0x00100000   boot from RAM (for testing only)
-#
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-## Standard: boot high
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-## For testing: boot from RAM
-# CONFIG_SYS_TEXT_BASE = 0x00100000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
-	-I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board

board/esd/plu405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd PLU405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF80000

board/esd/pmc405/config.mk

@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF80000

board/esd/pmc405de/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esd/pmc440/config.mk

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2002-2010
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -20,11 +20,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFFF90000
-endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 

board/esd/vme8349/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# VME8349E
-#
-
-CONFIG_SYS_TEXT_BASE  =   0xFFF00000

board/esd/voh405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd VOH405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF80000

board/esd/vom405/config.mk

@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-CONFIG_SYS_TEXT_BASE = 0xFFFC8000

board/esd/wuh405/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# esd ASH405 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFFC0000

board/esteem192e/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TQM8xxL boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0x40000000

board/etin/debris/config.mk

@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Sangmoon, Etin Systems, dogoil@etinsys.com.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Debris boards
-#
-
-#CONFIG_SYS_TEXT_BASE = 0x00090000
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/etin/kvme080/config.mk

@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2005
-# Sangmoon, Etin Systems, dogoil@etinsys.com.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# KVME080 board
-#
-
-CONFIG_SYS_TEXT_BASE = 0xFFF00000
-
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)

board/etx094/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# ETX_094 Boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0x40000000

board/evb64260/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# EVB64260 boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0xfff00000

board/fads/config.mk

@@ -28,7 +28,6 @@
 # MPC885ADS boards
 #
 
-CONFIG_SYS_TEXT_BASE = 0xFE000000
 PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/fads
 HOSTCFLAGS += -I$(TOPDIR)/board/fads
 HOST_ENVIRO_CFLAGS += -I$(TOPDIR)/board/fads

board/flagadm/config.mk

@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# TQM8xxL boards
-#
-
-CONFIG_SYS_TEXT_BASE = 0x40000000