Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table

SDIO1 (the SD-card slot on Dalmore) needs to have its pads setup
before the MMC driver is added.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

arch/arm/include/asm/arch-tegra114/gp_padctrl.h

@@ -74,4 +74,10 @@ struct apb_misc_gp_ctlr {
 	u32	aocfg0;		/* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */
 };
 
+/* SDMMC1/3 settings from section 27.5 of T114 TRM */
+#define SDIOCFG_DRVUP_SLWF	0
+#define SDIOCFG_DRVDN_SLWR	0
+#define SDIOCFG_DRVUP		0x24
+#define SDIOCFG_DRVDN		0x14
+
 #endif	/* _TEGRA114_GP_PADCTRL_H_ */

board/nvidia/dalmore/dalmore.c

@@ -16,6 +16,7 @@
 
 #include <common.h>
 #include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
 #include "pinmux-config-dalmore.h"
 
 /*
@@ -32,4 +33,7 @@ void pinmux_init(void)
 
 	pinmux_config_table(unused_pins_lowpower,
 		ARRAY_SIZE(unused_pins_lowpower));
+
+	/* Initialize any non-default pad configs (APB_MISC_GP regs) */
+	padgrp_config_table(dalmore_padctrl, ARRAY_SIZE(dalmore_padctrl));
 }

board/nvidia/dalmore/pinmux-config-dalmore.h

@@ -361,4 +361,10 @@ static struct pingroup_config tegra114_pinmux_set_nontristate[] = {
 
 	DEFAULT_PINMUX(SDMMC3_CD_N,     SDMMC3, UP,       NORMAL,   INPUT),
 };
+
+static struct padctrl_config dalmore_padctrl[] = {
+	/* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+	DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+		SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE),
+};
 #endif /* PINMUX_CONFIG_COMMON_H */