mmc: Add support for Xilinx Zynq sdhci controller

Add support for SD, MMC and eMMC card on Xilinx Zynq.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@ti.com>

arch/arm/include/asm/arch-zynq/hardware.h

@@ -29,6 +29,8 @@
 #define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
 #define ZYNQ_GEM_BASEADDR0		0xE000B000
 #define ZYNQ_GEM_BASEADDR1		0xE000C000
+#define ZYNQ_SDHCI_BASEADDR0		0xE0100000
+#define ZYNQ_SDHCI_BASEADDR1		0xE0101000
 
 /* Reflect slcr offsets */
 struct slcr_regs {

arch/arm/include/asm/arch-zynq/sys_proto.h

@@ -28,4 +28,7 @@ extern void zynq_slcr_unlock(void);
 extern void zynq_slcr_cpu_reset(void);
 extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk);
 
+/* Driver extern functions */
+extern int zynq_sdhci_init(u32 regbase);
+
 #endif /* _SYS_PROTO_H_ */

board/xilinx/zynq/board.c

@@ -54,6 +54,23 @@ int board_eth_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bd)
+{
+	int ret = 0;
+
+#if defined(CONFIG_ZYNQ_SDHCI)
+# if defined(CONFIG_ZYNQ_SDHCI0)
+	ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0);
+# endif
+# if defined(CONFIG_ZYNQ_SDHCI1)
+	ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1);
+# endif
+#endif
+	return ret;
+}
+#endif
+
 int dram_init(void)
 {
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;

drivers/mmc/Makefile

@@ -49,6 +49,7 @@ COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
 COBJS-$(CONFIG_DWMMC) += dw_mmc.o
 COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
+COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)

drivers/mmc/zynq_sdhci.c

@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2013 Inc.
+ *
+ * Xilinx Zynq SD Host Controller Interface
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <sdhci.h>
+#include <asm/arch/sys_proto.h>
+
+int zynq_sdhci_init(u32 regbase)
+{
+	struct sdhci_host *host = NULL;
+
+	host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
+	if (!host) {
+		printf("zynq_sdhci_init: sdhci_host malloc fail\n");
+		return 1;
+	}
+
+	host->name = "zynq_sdhci";
+	host->ioaddr = (void *)regbase;
+	host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD;
+	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+
+	host->host_caps = MMC_MODE_HC;
+
+	add_sdhci(host, 52000000, 52000000 >> 9);
+	return 0;
+}

include/configs/zynq.h

@@ -56,6 +56,22 @@
 #define CONFIG_ZYNQ_GEM0
 #define CONFIG_ZYNQ_GEM_PHY_ADDR0	7
 
+#define CONFIG_ZYNQ_SDHCI
+#define CONFIG_ZYNQ_SDHCI0
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
 # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */