da8xx/hawkboard: Add support for ohci host controller

Also enable the ohci port on hawkboard. These additions result in an
increased u-boot size -- adjust the same accordingly in the board's
config.

Move the usb header for da8xx platforms under arch-davinci.

Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>

arch/arm/cpu/arm926ejs/davinci/psc.c

@@ -128,6 +128,11 @@ void lpsc_syncreset(unsigned int id)
 	lpsc_transition(id, 0x01);
 }
 
+void lpsc_disable(unsigned int id)
+{
+	lpsc_transition(id, 0x0);
+}
+
 /* Not all DaVinci chips have a DSP power domain. */
 #ifdef CONFIG_SOC_DM644X
 

drivers/usb/musb/da8xx.h → arch/arm/include/asm/arch-davinci/da8xx-usb.h

@@ -1,5 +1,5 @@
 /*
- * da8xx.h -- TI's DA8xx platform specific usb wrapper definitions.
+ * da8xx-usb.h -- TI's DA8xx platform specific usb wrapper definitions.
  *
  * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
  *
@@ -26,7 +26,6 @@
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/gpio.h>
-#include "musb_core.h"
 
 /* Base address of da8xx usb0 wrapper */
 #define DA8XX_USB_OTG_BASE  0x01E00000
@@ -99,4 +98,8 @@ struct da8xx_usb_regs {
 #define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
 
 #define DA8XX_USB_VBUS_GPIO	(1 << 15)
+
+int usb_phy_on(void);
+void usb_phy_off(void);
+
 #endif	/* __DA8XX_MUSB_H__ */

arch/arm/include/asm/arch-davinci/hardware.h

@@ -306,6 +306,7 @@ typedef volatile unsigned int *	dv_reg_p;
 
 void lpsc_on(unsigned int id);
 void lpsc_syncreset(unsigned int id);
+void lpsc_disable(unsigned int id);
 void dsp_on(void);
 
 void davinci_enable_uart0(void);

board/davinci/da8xxevm/hawkboard.c

@@ -4,6 +4,7 @@
  * Copyright (C) 2008 Sekhar Nori, Texas Instruments, Inc.  <nsekhar@ti.com>
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
  * Copyright (C) 2004 Texas Instruments.
+ * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>.
  *
  * ----------------------------------------------------------------------------
  * This program is free software; you can redistribute it and/or modify
@@ -28,6 +29,7 @@
 #include <asm/io.h>
 #include <asm/arch/davinci_misc.h>
 #include <asm/arch/pinmux_defs.h>
+#include <asm/arch/da8xx-usb.h>
 #include <ns16550.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -89,3 +91,42 @@ int misc_init_r(void)
 
 	return 0;
 }
+
+int usb_phy_on(void)
+{
+	u32 timeout;
+	u32 cfgchip2;
+
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+
+	cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
+		      CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ |
+		      CFGCHIP2_USB1PHYCLKMUX);
+	cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
+		    CFGCHIP2_REFFREQ_24MHZ | CFGCHIP2_USB2PHYCLKMUX |
+		    CFGCHIP2_USB1SUSPENDM;
+
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+
+	/* wait until the usb phy pll locks */
+	timeout = DA8XX_USB_OTG_TIMEOUT;
+	while (timeout--)
+		if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
+			return 1;
+
+	/* USB phy was not turned on */
+	return 0;
+}
+
+void usb_phy_off(void)
+{
+	u32 cfgchip2;
+
+	/*
+	 * Power down the on-chip PHY.
+	 */
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+	cfgchip2 &= ~(CFGCHIP2_PHY_PLLON | CFGCHIP2_USB1SUSPENDM);
+	cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_RESET;
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+}

drivers/usb/host/Makefile

@@ -28,6 +28,7 @@ LIB	:= $(obj)libusb_host.o
 # ohci
 COBJS-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
 COBJS-$(CONFIG_USB_ATMEL) += ohci-at91.o
+COBJS-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
 COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
 COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
 COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o

drivers/usb/host/ohci-da8xx.c

@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+
+#include <asm/arch/da8xx-usb.h>
+
+int usb_cpu_init(void)
+{
+	/* enable psc for usb2.0 */
+	lpsc_on(DAVINCI_LPSC_USB20);
+
+	/* enable psc for usb1.0 */
+	lpsc_on(DAVINCI_LPSC_USB11);
+
+	/* start the on-chip usb phy and its pll */
+	if (usb_phy_on())
+		return 0;
+
+	return 1;
+}
+
+int usb_cpu_stop(void)
+{
+	usb_phy_off();
+
+	/* turn off the usb clock and assert the module reset */
+	lpsc_disable(DAVINCI_LPSC_USB11);
+	lpsc_disable(DAVINCI_LPSC_USB20);
+
+	return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+	return usb_cpu_stop();
+}

drivers/usb/musb/da8xx.c

@@ -23,7 +23,8 @@
  */
 #include <common.h>
 
-#include "da8xx.h"
+#include "musb_core.h"
+#include <asm/arch/da8xx-usb.h>
 
 /* MUSB platform configuration */
 struct musb_config musb_cfg = {

include/configs/hawkboard.h

@@ -137,7 +137,7 @@
 #define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0xe0000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x40000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
 #define CONFIG_SYS_NAND_U_BOOT_DST	0xc1180000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_DST - \
@@ -158,6 +158,16 @@
 
 #endif /* CONFIG_SYS_USE_NAND */
 
+/* USB Configs */
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_OHCI_DA8XX
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x01E25000
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	15
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"hawkboard"
+
 /*
  * U-Boot general configuration
  */
@@ -200,6 +210,8 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_EXT2
 
 #ifdef CONFIG_CMD_BDI
 #define CONFIG_CLOCKS