mx5: Fix clock gate values

The clock gate values are 2-bit bit-fields. Hence, setting or clearing only one
of these bits like what was done is wrong and can lead to unpredictable behavior
depending on the original value of these bit-fields.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Stefano Babic <sbabic@denx.de>

arch/arm/cpu/armv7/mx5/clock.c

@@ -101,10 +101,11 @@ void set_usboh3_clk(void)
 
 void enable_usboh3_clk(unsigned char enable)
 {
-	if (enable)
-		setbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_USBOH3_60M(1));
-	else
-		clrbits_le32(&mxc_ccm->CCGR2, MXC_CCM_CCGR2_USBOH3_60M(1));
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR2,
+			MXC_CCM_CCGR2_USBOH3_60M(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR2_USBOH3_60M(cg));
 }
 
 #ifdef CONFIG_I2C_MXC
@@ -132,10 +133,11 @@ void set_usb_phy1_clk(void)
 
 void enable_usb_phy1_clk(unsigned char enable)
 {
-	if (enable)
-		setbits_le32(&mxc_ccm->CCGR4, MXC_CCM_CCGR4_USB_PHY1(1));
-	else
-		clrbits_le32(&mxc_ccm->CCGR4, MXC_CCM_CCGR4_USB_PHY1(1));
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR4,
+			MXC_CCM_CCGR4_USB_PHY1(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR4_USB_PHY1(cg));
 }
 
 void set_usb_phy2_clk(void)
@@ -145,10 +147,11 @@ void set_usb_phy2_clk(void)
 
 void enable_usb_phy2_clk(unsigned char enable)
 {
-	if (enable)
-		setbits_le32(&mxc_ccm->CCGR4, MXC_CCM_CCGR4_USB_PHY2(1));
-	else
-		clrbits_le32(&mxc_ccm->CCGR4, MXC_CCM_CCGR4_USB_PHY2(1));
+	unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF;
+
+	clrsetbits_le32(&mxc_ccm->CCGR4,
+			MXC_CCM_CCGR4_USB_PHY2(MXC_CCM_CCGR_CG_MASK),
+			MXC_CCM_CCGR4_USB_PHY2(cg));
 }
 
 /*

arch/arm/include/asm/arch-mx5/crm_regs.h

@@ -285,6 +285,9 @@ struct mxc_ccm_reg {
 
 /* Define the bits in register CCGRx */
 #define MXC_CCM_CCGR_CG_MASK				0x3
+#define MXC_CCM_CCGR_CG_OFF				0x0
+#define MXC_CCM_CCGR_CG_RUN_ON				0x1
+#define MXC_CCM_CCGR_CG_ON				0x3
 
 #define MXC_CCM_CCGR0_ARM_BUS_OFFSET			0
 #define MXC_CCM_CCGR0_ARM_BUS(v)			(((v) & 0x3) << 0)