Remove the bios emulator from MAI board.

The bios emulator in the MAI board can not pass compile
and have a lot of crap in it. remove it and will have a
clean and small bios emulator in the drivers directory
which can be uesed for every board.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

board/MAI/bios_emulator/bios.c

@@ -1,335 +0,0 @@
-/*
- * Mostly done after the Scitech Bios emulation
- * Written by Hans-Jörg Frieden
- * Hyperion Entertainment
- */
-#include "x86emu.h"
-#include "glue.h"
-
-#undef DEBUG
-#ifdef DEBUG
-#define PRINTF(fmt, args...) printf(fmt, ## args)
-#else
-#define PRINTF(fmt, args...)
-#endif
-
-#define BIOS_SEG 0xFFF0
-#define PCIBIOS_SUCCESSFUL 0
-#define PCIBIOS_DEVICE_NOT_FOUND 0x86
-
-typedef unsigned char UBYTE;
-typedef unsigned short UWORD;
-typedef unsigned long ULONG;
-
-typedef char BYTE;
-typedef short WORT;
-typedef long LONG;
-
-static inline UBYTE read_byte(volatile UBYTE* from)
-{
-    int x;
-    asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UBYTE)x;
-}
-
-static inline void write_byte(volatile UBYTE *to, int x)
-{
-    asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline UWORD read_word_little(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m" (*from));
-    return (UWORD)x;
-}
-
-static inline UWORD read_word_big(volatile UWORD *from)
-{
-    int x;
-    asm volatile ("lhz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (UWORD)x;
-}
-
-static inline void write_word_little(volatile UWORD *to, int x)
-{
-    asm volatile ("sthbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_word_big(volatile UWORD *to, int x)
-{
-    asm volatile ("sth %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-static inline ULONG read_long_little(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwbrx %0,0,%1\n eieio" : "=r" (x) : "r" (from), "m"(*from));
-    return (ULONG)x;
-}
-
-static inline ULONG read_long_big(volatile ULONG *from)
-{
-    unsigned long x;
-    asm volatile ("lwz %0,%1\n eieio" : "=r" (x) : "m" (*from));
-    return (ULONG)x;
-}
-
-static inline void write_long_little(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stwbrx %1,0,%2\n eieio" : "=m" (*to) : "r" (x), "r" (to));
-}
-
-static inline void write_long_big(volatile ULONG *to, ULONG x)
-{
-    asm volatile ("stw %1,%0\n eieio" : "=m" (*to) : "r" (x));
-}
-
-#define port_to_mem(from) (0xFE000000|(from))
-#define in_byte(from) read_byte( (UBYTE *)port_to_mem(from))
-#define in_word(from) read_word_little((UWORD *)port_to_mem(from))
-#define in_long(from) read_long_little((ULONG *)port_to_mem(from))
-#define out_byte(to, val) write_byte((UBYTE *)port_to_mem(to), val)
-#define out_word(to, val) write_word_little((UWORD *)port_to_mem(to), val)
-#define out_long(to, val) write_long_little((ULONG *)port_to_mem(to), val)
-
-static void X86API undefined_intr(int intno)
-{
-    extern u16 A1_rdw(u32 addr);
-    if (A1_rdw(intno * 4 + 2) == BIOS_SEG)
-    {
-	PRINTF("Undefined interrupt %xh called AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   intno, M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-	X86EMU_halt_sys();
-    }
-    else
-    {
-	PRINTF("Calling interrupt %xh, AL=%xh, AH=%xh\n", intno, M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int42(int intno);
-static void X86API int15(int intno);
-
-static void X86API int10(int intno)
-{
-    if (A1_rdw(intno*4+2) == BIOS_SEG)
-	int42(intno);
-    else
-    {
-	PRINTF("int10: branching to %04X:%04X, AL=%xh, AH=%xh\n", A1_rdw(intno*4+2), A1_rdw(intno*4),
-	       M.x86.R_AL, M.x86.R_AH);
-	X86EMU_prepareForInt(intno);
-    }
-}
-
-static void X86API int1A(int intno)
-{
-    int device;
-
-    switch(M.x86.R_AX)
-    {
-    case 0xB101: /* PCI Bios Present? */
-	M.x86.R_AL  = 0x00;
-	M.x86.R_EDX = 0x20494350;
-	M.x86.R_BX  = 0x0210;
-	M.x86.R_CL  = 3;
-	CLEAR_FLAG(F_CF);
-	break;
-    case 0xB102: /* Find device */
-	device = mypci_find_device(M.x86.R_DX, M.x86.R_CX, M.x86.R_SI);
-	if (device != -1)
-	{
-	    M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	    M.x86.R_BH = mypci_bus(device);
-	    M.x86.R_BL = mypci_devfn(device);
-	}
-	else
-	{
-	    M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB103: /* Find PCI class code */
-	M.x86.R_AH = PCIBIOS_DEVICE_NOT_FOUND;
-	/*printf("Find by class not yet implmented"); */
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	break;
-    case 0xB108: /* read config byte */
-	M.x86.R_CL = mypci_read_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_byte %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CL); */
-	break;
-    case 0xB109: /* read config word */
-	M.x86.R_CX = mypci_read_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_word %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10A: /* read config dword */
-	M.x86.R_ECX = mypci_read_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("read_config_long %x,%x,%x -> %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_ECX); */
-	break;
-    case 0xB10B: /* write config byte */
-	mypci_write_cfg_byte(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CL);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_byte %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*    M.x86.R_CL); */
-	break;
-    case 0xB10C: /* write config word */
-	mypci_write_cfg_word(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_CX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_word %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_CX); */
-	break;
-    case 0xB10D: /* write config dword */
-	mypci_write_cfg_long(M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, M.x86.R_ECX);
-	M.x86.R_AH = PCIBIOS_SUCCESSFUL;
-	CONDITIONAL_SET_FLAG((M.x86.R_AH != PCIBIOS_SUCCESSFUL), F_CF);
-	/*printf("write_config_long %x,%x,%x <- %x\n", M.x86.R_BH, M.x86.R_BL, M.x86.R_DI, */
-	/*	    M.x86.R_ECX); */
-	break;
-    default:
-	PRINTF("BIOS int %xh: Unknown function AX=%04xh\n", intno, M.x86.R_AX);
-
-    }
-}
-
-void bios_init(void)
-{
-    int i;
-    X86EMU_intrFuncs bios_intr_tab[256];
-
-    for (i=0; i<256; i++)
-    {
-	write_long_little(M.mem_base+i*4, BIOS_SEG<<16);
-	bios_intr_tab[i] = undefined_intr;
-    }
-
-    bios_intr_tab[0x10] = int10;
-    bios_intr_tab[0x1A] = int1A;
-    bios_intr_tab[0x42] = int42;
-    bios_intr_tab[0x15] = int15;
-
-    bios_intr_tab[0x6D] = int42;
-
-    X86EMU_setupIntrFuncs(bios_intr_tab);
-    video_init();
-}
-
-unsigned char setup_40x25[] =
-{
-    0x38, 0x28, 0x2d, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_80x25[] =
-{
-    0x71, 0x50, 0x5a, 0x0a, 0x1f, 6, 0x19,
-    0x1c, 2, 7, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_graphics[] =
-{
-    0x38, 0x28, 0x20, 0x0a, 0x7f, 6, 0x64,
-    0x70, 2, 1, 6, 7, 0, 0, 0, 0
-};
-
-unsigned char setup_bw[] =
-{
-    0x61, 0x50, 0x52, 0x0f, 0x19, 6, 0x19,
-    0x19, 2, 0x0d, 0x0b, 0x0c, 0, 0, 0, 0
-};
-
-unsigned char * setup_modes[] =
-{
-    setup_40x25,     /* mode 0: 40x25 bw text */
-    setup_40x25,     /* mode 1: 40x25 col text */
-    setup_80x25,     /* mode 2: 80x25 bw text */
-    setup_80x25,     /* mode 3: 80x25 col text */
-    setup_graphics,  /* mode 4: 320x200 col graphics */
-    setup_graphics,  /* mode 5: 320x200 bw graphics */
-    setup_graphics,  /* mode 6: 640x200 bw graphics */
-    setup_bw         /* mode 7: 80x25 mono text */
-};
-
-unsigned int setup_cols[] =
-{
-    40, 40, 80, 80, 40, 40, 80, 80
-};
-
-unsigned char setup_modesets[] =
-{
-     0x2C, 0x28, 0x2D, 0x29, 0x2A, 0x2E, 0x1E, 0x29
-};
-
-unsigned int setup_bufsize[] =
-{
-    2048, 2048, 4096, 2096, 16384, 16384, 16384, 4096
-};
-
-void bios_set_mode(int mode)
-{
-    int i;
-    unsigned char mode_set = setup_modesets[mode]; /* Control register value */
-    unsigned char *setup_regs = setup_modes[mode]; /* Register 3D4 Array */
-
-    /* Switch video off */
-    out_byte(0x3D8, mode_set & 0x37);
-
-    /* Set up parameters at 3D4h */
-    for (i=0; i<16; i++)
-    {
-	out_byte(0x3D4, (unsigned char)i);
-	out_byte(0x3D5, *setup_regs);
-	setup_regs++;
-    }
-
-    /* Enable video */
-    out_byte(0x3D8, mode_set);
-
-    /* Set overscan */
-    if (mode == 6) out_byte(0x3D9, 0x3F);
-    else           out_byte(0x3D9, 0x30);
-}
-
-static void bios_print_string(void)
-{
-    extern void video_bios_print_string(char *string, int x, int y, int attr, int count);
-    char *s = (char *)(M.x86.R_ES<<4) + M.x86.R_BP;
-    int attr;
-    if (M.x86.R_AL & 0x02) attr = - 1;
-    else                   attr = M.x86.R_BL;
-    video_bios_print_string(s, M.x86.R_DH, M.x86.R_DL, attr, M.x86.R_CX);
-}
-
-static void X86API int42(int intno)
-{
-    switch (M.x86.R_AH)
-    {
-    case 0x00:
-	bios_set_mode(M.x86.R_AL);
-	break;
-    case 0x13:
-	bios_print_string();
-	break;
-    default:
-	PRINTF("Warning: VIDEO BIOS interrupt %xh unimplemented function %xh, AL = %xh\n",
-	       intno, M.x86.R_AH, M.x86.R_AL);
-    }
-}
-
-static void X86API int15(int intno)
-{
-    PRINTF("Called interrupt 15h: AX = %xh, BX = %xh, CX = %xh, DX = %xh\n",
-	   M.x86.R_AX, M.x86.R_BX, M.x86.R_CX, M.x86.R_DX);
-}

board/MAI/bios_emulator/glue.c

@@ -1,515 +0,0 @@
-#include <common.h>
-#include <pci.h>
-#include <74xx_7xx.h>
-
-
-#ifdef DEBUG
-#undef DEBUG
-#endif
-
-#ifdef DEBUG
-#define PRINTF(format, args...) _printf(format , ## args)
-#else
-#define PRINTF(format, argc...)
-#endif
-
-static pci_dev_t to_pci(int bus, int devfn)
-{
-    return PCI_BDF(bus, (devfn>>3), devfn&3);
-}
-
-int mypci_find_device(int vendor, int product, int index)
-{
-    return pci_find_device(vendor, product, index);
-}
-
-int mypci_bus(int device)
-{
-    return PCI_BUS(device);
-}
-
-int mypci_devfn(int device)
-{
-    return (PCI_DEV(device)<<3) | PCI_FUNC(device);
-}
-
-
-#define mypci_read_func(type, size)				\
-type mypci_read_cfg_##size##(int bus, int devfn, int offset)	\
-{								\
-    type c;							\
-    pci_read_config_##size##(to_pci(bus, devfn), offset, &c);	\
-    return c;							\
-}
-
-#define mypci_write_func(type, size)				\
-void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value)	\
-{								\
-    pci_write_config_##size##(to_pci(bus, devfn), offset, value);	\
-}
-
-mypci_read_func(u8,byte);
-mypci_read_func(u16,word);
-
-mypci_write_func(u8,byte);
-mypci_write_func(u16,word);
-
-u32 mypci_read_cfg_long(int bus, int devfn, int offset)
-{
-    u32 c;
-    pci_read_config_dword(to_pci(bus, devfn), offset, &c);
-    return c;
-}
-
-void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
-{
-    pci_write_config_dword(to_pci(bus, devfn), offset, value);
-}
-
-void _printf(const char *fmt, ...)
-{
-    va_list args;
-    char buf[CFG_PBSIZE];
-
-    va_start(args, fmt);
-    (void)vsprintf(buf, fmt, args);
-    va_end(args);
-
-    printf(buf);
-}
-
-char *_getenv(char *name)
-{
-    return getenv(name);
-}
-
-unsigned long get_bar_size(pci_dev_t dev, int offset)
-{
-    u32 bar_back, bar_value;
-
-    /*  Save old BAR value */
-    pci_read_config_dword(dev, offset, &bar_back);
-
-    /*  Write all 1's. */
-    pci_write_config_dword(dev, offset, ~0);
-
-    /*  Now read back the relevant bits */
-    pci_read_config_dword(dev, offset, &bar_value);
-
-    /*  Restore original value */
-    pci_write_config_dword(dev, offset, bar_back);
-
-    if (bar_value == 0) return 0xFFFFFFFF; /*  This BAR is disabled */
-
-    if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
-    {
-	/*  This is a memory space BAR. Mask it out so we get the size of it */
-	return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
-    }
-
-    /*  Not suitable */
-    return 0xFFFFFFFF;
-}
-
-void enable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg |= 0x08; */
-    cfg |= 0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void disable_compatibility_hole(void)
-{
-    u8 cfg;
-    pci_dev_t art = PCI_BDF(0,0,0);
-
-    pci_read_config_byte(art, 0x54, &cfg);
-    /* cfg &= ~0x08; */
-    cfg &= ~0x20;
-    pci_write_config_byte(art, 0x54, cfg);
-}
-
-void map_rom(pci_dev_t dev, u32 address)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
-}
-
-void unmap_rom(pci_dev_t dev)
-{
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-}
-
-void bat_map(u8 batnum, u32 address, u32 length)
-{
-    u32 temp = address;
-    address &= 0xFFFE0000;
-    temp    &= 0x0001FFFF;
-    length = (length - 1 ) >> 17;
-    length <<= 2;
-
-    switch (batnum)
-    {
-    case 0:
-	__asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
-	break;
-    case 1:
-	__asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
-	break;
-    case 2:
-	__asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
-	break;
-    case 3:
-	__asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
-	__asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
-	break;
-    }
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
-
-int attempt_map_rom(pci_dev_t dev, void *copy_address)
-{
-    u32 rom_size      = 0;
-    u32 rom_address   = 0;
-    u32 bar_size      = 0;
-    u32 bar_backup    = 0;
-    int i,j;
-    void *image       = 0;
-    u32 image_size    = 0;
-    int did_correct   = 0;
-    u32 prefetch_addr = 0;
-    u32 prefetch_size = 0;
-    u32 prefetch_idx  = 0;
-
-    /*  Get the size of the expansion rom */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
-    pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
-    if ((rom_size & 0x01) == 0)
-    {
-	PRINTF("No ROM\n");
-	return 0;
-    }
-
-    rom_size &= 0xFFFFF800;
-    rom_size = (~rom_size)+1;
-
-    PRINTF("ROM Size is %dK\n", rom_size/1024);
-
-    /*
-     * Try to find a place for the ROM. We always attempt to use
-     * one of the card's bases for this, as this will be in any
-     * bridge's resource range as well as being free of conflicts
-     * with other cards. In a graphics card it is very unlikely
-     * that there won't be any base address that is large enough to
-     * hold the rom.
-     *
-     * FIXME: To work around this, theoretically the largest base
-     * could be used if none is found in the loop below.
-     */
-
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	bar_size = get_bar_size(dev, i);
-	PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
-	       (i - PCI_BASE_ADDRESS_0)/4,
-	       bar_size/1024);
-	if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
-	{
-	    PRINTF("Found a match for rom size\n");
-	    pci_read_config_dword(dev, i, &rom_address);
-	    rom_address &= 0xFFFFFFF0;
-	    if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
-	}
-    }
-
-    if (rom_address == 0 || rom_address == 0xFFFFFFF0)
-    {
-	PRINTF("No suitable rom address found\n");
-	return 0;
-    }
-
-    /*  Disable the BAR */
-    pci_read_config_dword(dev, i, &bar_backup);
-    pci_write_config_dword(dev, i, 0);
-
-    /*  Map ROM */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
-
-    /*  Copy the rom to a place in the emulator space */
-    PRINTF("Claiming BAT 2\n");
-    bat_map(2, rom_address, rom_size);
-    /* show_bat_mapping(); */
-
-    if (0 == find_image(rom_address, rom_size, &image, &image_size))
-    {
-	PRINTF("No x86 BIOS image found\n");
-	return 0;
-    }
-
-    PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
-
-    /* memcpy(copy_address, rom_address, rom_size); */
-    {
-	unsigned char *from = (unsigned char *)image; /* rom_address; */
-	unsigned char *to = (unsigned char *)copy_address;
-	for (j=0; j<image_size /*rom_size*/; j++)
-	{
-	    *to++ = *from++;
-	}
-    }
-
-    PRINTF("Copy is done\n");
-
-    /*  Unmap the ROM and restore the BAR */
-    pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-    pci_write_config_dword(dev, i, bar_backup);
-
-    /*  FIXME: Shouldn't be needed anymore*/
-    /* bat_map(2, 0x80000000, 256*1024*1024);
-       show_bat_mapping(); */
-
-    /*
-     * Since most cards can probably only do 16 bit IO addressing, we
-     * correct their IO base into an appropriate value.
-     * This should do for most.
-     */
-    for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
-    {
-	unsigned long value;
-	pci_read_config_dword(dev, i, &value);
-	if (value & 0x01) /*  IO */
-	{
-	    did_correct = 1;
-	    pci_write_config_dword(dev, i, 0x1001);
-	    break;
-	}
-
-	if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
-	{
-	    prefetch_idx = i;
-	    prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
-	    prefetch_size = get_bar_size(dev, i);
-	}
-    }
-
-    if (1) /* did_correct) */
-    {
-	extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
-	int busnr = PCI_BUS(dev);
-	if (busnr)
-	{
-	    pci_dev_t bridge;
-	    PRINTF("Need to correct bridge device for IO range change\n");
-	    bridge = pci_find_bridge_for_bus(NULL, busnr);
-	    if (bridge == PCI_ANY_ID)
-	    {
-		PRINTF("Didn't find bridge. Hope that's OK\n");
-	    }
-	    else
-	    {
-		/*
-		 * Set upper I/O base/limit to 0
-		 */
-		pci_write_config_byte(bridge, 0x30, 0x00);
-		pci_write_config_byte(bridge, 0x31, 0x00);
-		pci_write_config_byte(bridge, 0x32, 0x00);
-		pci_write_config_byte(bridge, 0x33, 0x00);
-		if (did_correct)
-		{
-		    /*
-		     * set lower I/O base to 1000
-		     * That is, bits 0:3 are set to 0001 by default.
-		     * bits 7:4 contain I/O address bits 15:12
-		     * all others are assumed 0.
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    /*
-		     * Set lower I/O limit to 1FFF
-		     * That is, bits 0:3 are reserved and always 0000
-		     * Bits 7:4 contain I/O address bits 15:12
-		     * All others are assumed F.
-		     */
-		    pci_write_config_byte(bridge, 0x1D, 0x10);
-		    pci_write_config_byte(bridge, 0x0D, 0x20);
-		    PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-		else
-		{
-		    /*
-		     * This card doesn't have I/O, we disable I/O forwarding
-		     */
-		    pci_write_config_byte(bridge, 0x1C, 0x11);
-		    pci_write_config_byte(bridge, 0x1D, 0x00);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-		    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-		    pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-		    PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
-			   PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
-		}
-	    }
-	    /*
-	     * Correct the prefetchable memory base, which is not set correctly by
-	     * the U-Boot autoconfig stuff
-	     */
-	    if (prefetch_idx)
-	    {
-/* 		PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
-/* 		       prefetch_addr, prefetch_addr+prefetch_size, */
-/* 		       prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
-/* 		pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
-	    }
-
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
-	    pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
-
-	    pci_write_config_byte(bridge, 0xD0, 0x0A);
-	    pci_write_config_byte(bridge, 0xD3, 0x04);
-
-	    /*
-	     * Set the interrupt pin to 0
-	     */
-#if 0
-	    pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0);
-	    pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0);
-#endif
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
-	    pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-
-	}
-    }
-
-    /* Finally, enable the card's IO and memory response */
-    pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-    pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-    pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
-
-    return 1;
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
-{
-    int i = 0;
-    unsigned char *rom = (unsigned char *)rom_address;
-    /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
-
-    for (;;)
-    {
-	unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
-	unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
-	unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
-	if (*rom != 0x55 || *(rom+1) != 0xAA)
-	{
-	    PRINTF("Invalid header this is\n");
-	    return 0;
-	}
-	PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
-	       pci_image_type==0 ? "x86" :
-	       pci_image_type==1 ? "OpenFirmware" :
-	       "Unknown");
-	if (pci_image_type == 0)
-	{
-	    *image = rom;
-	    *image_size = pci_image_length;
-	    return 1;
-	}
-
-	if (*(rom+pci_data_offset+0x15) & 0x80)
-	{
-	    PRINTF("LAST image encountered, no image found\n");
-	    return 0;
-	}
-
-	rom += pci_image_length;
-    }
-}
-
-void show_bat_mapping(void)
-{
-    u32 dbat0u, dbat0l, ibat0u, ibat0l;
-    u32 dbat1u, dbat1l, ibat1u, ibat1l;
-    u32 dbat2u, dbat2l, ibat2u, ibat2l;
-    u32 dbat3u, dbat3l, ibat3u, ibat3l;
-    u32 msr, hid0, l2cr_reg;
-
-    __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
-    __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
-    __asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
-    __asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
-
-    __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
-    __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
-    __asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
-    __asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
-
-    __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
-    __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
-    __asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
-    __asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
-
-    __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
-    __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
-    __asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
-    __asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
-
-    __asm volatile ("mfmsr %0"     : "=r" (msr));
-    __asm volatile ("mfspr %0,1008": "=r" (hid0));
-    __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
-
-    printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
-	   dbat0u, dbat0l, ibat0u, ibat0l);
-    printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
-	   dbat1u, dbat1l, ibat1u, ibat1l);
-    printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
-	   dbat2u, dbat2l, ibat2u, ibat2l);
-    printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
-	   dbat3u, dbat3l, ibat3u, ibat3l);
-
-    printf("\nMSR: %08x   HID0: %08x   L2CR: %08x \n", msr,hid0, l2cr_reg);
-}
-
-
-void remove_init_data(void)
-{
-    char *s;
-
-    /*  Invalidate and disable data cache */
-    invalidate_l1_data_cache();
-    dcache_disable();
-
-    s = getenv("x86_cache");
-
-    if (!s)
-    {
-	icache_enable();
-	dcache_enable();
-    }
-    else if (s)
-    {
-	if (strcmp(s, "dcache")==0)
-	{
-	    dcache_enable();
-	}
-	else if (strcmp(s, "icache") == 0)
-	{
-	    icache_enable();
-	}
-	else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
-	{
-	    dcache_enable();
-	    icache_enable();
-	}
-    }
-
-    /*   show_bat_mapping();*/
-}

board/MAI/bios_emulator/glue.h

@@ -1,57 +0,0 @@
-#ifndef GLUE_H
-#define GLUE_H
-
-typedef unsigned int pci_dev_t;
-
-int mypci_find_device(int vendor, int product, int index);
-int mypci_bus(int device);
-int mypci_devfn(int device);
-unsigned long get_bar_size(pci_dev_t dev, int offset);
-
-u8   mypci_read_cfg_byte(int bus, int devfn, int offset);
-u16  mypci_read_cfg_word(int bus, int devfn, int offset);
-u32  mypci_read_cfg_long(int bus, int devfn, int offset);
-
-void mypci_write_cfg_byte(int bus, int devfn, int offset, u8 value);
-void mypci_write_cfg_word(int bus, int devfn, int offset, u16 value);
-void mypci_write_cfg_long(int bus, int devfn, int offset, u32 value);
-
-void _printf(const char *fmt, ...);
-char *_getenv(char *name);
-
-void *malloc(size_t size);
-void memset(void *addr, int value, size_t size);
-void memcpy(void *to, void *from, size_t numbytes);
-int  strcmp(char *, char *);
-
-void enable_compatibility_hole(void);
-void disable_compatibility_hole(void);
-
-void map_rom(pci_dev_t dev, unsigned long address);
-void unmap_rom(pci_dev_t dev);
-int  attempt_map_rom(pci_dev_t dev, void *copy_address);
-
-#define  PCI_BASE_ADDRESS_SPACE 0x01    /* 0 = memory, 1 = I/O */
-#define  PCI_BASE_ADDRESS_SPACE_IO 0x01
-#define  PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
-#define  PCI_BASE_ADDRESS_MEM_MASK      (~0x0fUL)
-
-#define PCI_BASE_ADDRESS_0      0x10    /* 32 bits */
-#define PCI_BASE_ADDRESS_1      0x14    /* 32 bits [htype 0,1 only] */
-#define PCI_BASE_ADDRESS_2      0x18    /* 32 bits [htype 0 only] */
-#define PCI_BASE_ADDRESS_3      0x1c    /* 32 bits */
-#define PCI_BASE_ADDRESS_4      0x20    /* 32 bits */
-#define PCI_BASE_ADDRESS_5      0x24    /* 32 bits */
-#define PCI_BUS(d)      (((d) >> 16) & 0xff)
-#define PCI_DEV(d)      (((d) >> 11) & 0x1f)
-#define PCI_FUNC(d)     (((d) >> 8) & 0x7)
-#define PCI_BDF(b,d,f)  ((b) << 16 | (d) << 11 | (f) << 8)
-
-#define PCI_ANY_ID (~0)
-#define PCI_ROM_ADDRESS         0x30    /* Bits 31..11 are address, 10..1 reserved */
-#define PCI_ROM_ADDRESS_ENABLE 0x01
-
-#define OFF(addr) ((addr) & 0xFFFF)
-#define SEG(addr) (((addr)>>4) &0xF000)
-
-#endif

board/MAI/bios_emulator/scitech/bin/bc31-d16.bat

@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 3.1.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC3;%BC3_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC3_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC3.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%BC3_PATH%\BIN;%DEFPATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC3_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC3_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 3.1 DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-c32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-d16.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-d32.bat

@@ -1,33 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bc45-snp.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-tnt.bat

@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC4;%BC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bc45-vxd.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows VxD mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32-bit VxD compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-w16.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 4.5 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc45-w32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 4.5 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC4;%BC4_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC4_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_BC5=
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC4
-PATH %SCITECH_BIN%;%BC4_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC4_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC4_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 4.5 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-c32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-d16.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-d32.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bc50-smx.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit SMX compilation configuration set up (SMX32).

board/MAI/bios_emulator/scitech/bin/bc50-snp.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-tnt.bat

@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BC5;%BC5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bc50-vxd.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows (VxD) compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-w16.bat

@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ 5.0 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-w32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BC5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bc50-x11.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BC5;%BC5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BC5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BC5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BC5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BC5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-c32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-d16.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit DOS compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-d32.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (DPMI32).

board/MAI/bios_emulator/scitech/bin/bcb5-smx.bat

@@ -1,35 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SMX32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=1
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit SMX compilation configuration set up (SMX32).

board/MAI/bios_emulator/scitech/bin/bcb5-snp.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=1
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 Snap compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-tnt.bat

@@ -1,48 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\BCB5;%BCB5_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_DPMI16=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_TNT=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%BC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit DOS compilation configuration set up (TNT).

board/MAI/bios_emulator/scitech/bin/bcb5-vxd.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\VXD\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_VXD=1
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows (VxD) compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-w16.bat

@@ -1,34 +0,0 @@
- @echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 16 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC16.MK
-SET USE_DPMI16=
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_VXD=
-SET USE_BC5=1
-SET USE_SMX32=
-SET USE_SMX16=
-SET WIN32_GUI=
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\turboc.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink.cfg
-
-echo Borland C++ Builder 5.0 16 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-w32.bat

@@ -1,40 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET C_INCLUDE=%BCB5_PATH%\INCLUDE
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto createfiles
-call win32sdk.bat borland
-
-:createfiles
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/bcb5-x11.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Borland C++ Builder 5.0 in 32 bit Windows mode.
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\BCB5;%BCB5_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%BCB5_PATH%\INCLUDE;
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\BC32.MK
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_VXD=
-SET USE_TNT=
-SET USE_SMX32=
-SET USE_SMX16=
-SET USE_BC5=1
-SET WIN32_GUI=1
-SET USE_SNAP=
-SET BC_LIBBASE=BC5
-PATH %SCITECH_BIN%;%BCB5_PATH%\BIN;%DEFPATH%%BC5_CD_PATH%
-
-REM: Create Borland compile/link configuration scripts
-echo -I%INCLUDE% > %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% >> %BCB5_PATH%\BIN\bcc32.cfg
-echo -L%LIB% > %BCB5_PATH%\BIN\tlink32.cfg
-
-echo Borland C++ Builder 5.0 32 bit Windows compilation configuration set up.

board/MAI/bios_emulator/scitech/bin/build

@@ -1,22 +0,0 @@
-#! /bin/sh
-
-if [ $# -lt 1 ] || ( [ "$1" != gcc-linux ] && [ "$1" != qnx4 ] ) ; then
-	echo Usage: $0 compiler_name [DMAKE commands]
-	echo
-	echo Current compilers:
-	echo "  gcc-linux  - GNU C/C++ 2.7 or higher, 32 bit"
-	echo "  qnx4  - Watcom C/C++ 10.6 or higher, 32 bit"
-	exit 1
-fi
-
-unset DBG OPT OPT_SIZE BUILD_DLL IMPORT_DLL FPU CHECKS BETA
-. ${1}.sh
-
-shift
-dmake $* && exit 0
-
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-exit 1
-

board/MAI/bios_emulator/scitech/bin/build.bat

@@ -1,4 +0,0 @@
-@echo off
-rem Disable checked build and build release code
-set CHECKED=
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/build_db.bat

@@ -1,4 +0,0 @@
-@echo off
-rem Enable checked build and build debug code
-set CHECKED=1
-call build_it.bat %1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/build_it.bat

@@ -1,432 +0,0 @@
-@echo off
-rem Generic batch file to build a version of the library. This batch file
-rem assumes that the correct batch files exist to setup the appropriate
-rem compilation environments, and that the DMAKE.EXE program is available
-rem somewhere on the path.
-rem
-rem Builds as release or debug depending on the value of the CHECKED
-rem environment variable.
-
-rem Unset all environment variables that change the compile process
-set DBG=
-set OPT=
-set OPT_SIZE=
-set BUILD_DLL=
-set IMPORT_DLL=
-set FPU=
-set CHECKS=
-set BETA=
-
-if %1==bc31-d16 goto bc31-d16
-if %1==bc45-d16 goto bc45-d16
-if %1==bc45-d32 goto bc45-d32
-if %1==bc45-tnt goto bc45-tnt
-if %1==bc45-w16 goto bc45-w16
-if %1==bc45-w32 goto bc45-w32
-if %1==bc45-c32 goto bc45-c32
-if %1==bc45-vxd goto bc45-vxd
-if %1==bc45-snp goto bc45-snp
-if %1==bc50-d16 goto bc50-d16
-if %1==bc50-d32 goto bc50-d32
-if %1==bc50-tnt goto bc50-tnt
-if %1==bc50-w16 goto bc50-w16
-if %1==bc50-w32 goto bc50-w32
-if %1==bc50-c32 goto bc50-c32
-if %1==bc50-vxd goto bc50-vxd
-if %1==bc50-snp goto bc50-snp
-if %1==gcc2-d32 goto gcc2-d32
-if %1==gcc2-w32 goto gcc2-w32
-if %1==gcc2-c32 goto gcc2-c32
-if %1==gcc2-linux goto gcc2-linux
-if %1==vc40-d16 goto vc40-d16
-if %1==vc40-tnt goto vc40-tnt
-if %1==vc40-w16 goto vc40-w16
-if %1==vc40-w32 goto vc40-w32
-if %1==vc40-c32 goto vc40-c32
-if %1==vc40-drv9x goto vc40-drv9x
-if %1==vc40-drvnt goto vc40-drvnt
-if %1==vc40-rtt goto vc40-rtt
-if %1==vc40-snp goto vc40-snp
-if %1==vc50-d16 goto vc50-d16
-if %1==vc50-tnt goto vc50-tnt
-if %1==vc50-w16 goto vc50-w16
-if %1==vc50-w32 goto vc50-w32
-if %1==vc50-c32 goto vc50-c32
-if %1==vc50-drv9x goto vc50-drv9x
-if %1==vc50-drvnt goto vc50-drvnt
-if %1==vc50-rtt goto vc50-rtt
-if %1==vc50-snp goto vc50-snp
-if %1==vc60-d16 goto vc60-d16
-if %1==vc60-tnt goto vc60-tnt
-if %1==vc60-w16 goto vc60-w16
-if %1==vc60-w32 goto vc60-w32
-if %1==vc60-c32 goto vc60-c32
-if %1==vc60-drv9x goto vc60-drv9x
-if %1==vc60-drvnt goto vc60-drvnt
-if %1==vc60-drvw2k goto vc60-drvw2k
-if %1==vc60-rtt goto vc60-rtt
-if %1==vc60-snp goto vc60-snp
-if %1==wc10ad16 goto wc10ad16
-if %1==wc10ad32 goto wc10ad32
-if %1==wc10atnt goto wc10atnt
-if %1==wc10aw16 goto wc10aw16
-if %1==wc10aw32 goto wc10aw32
-if %1==wc10ac32 goto wc10ac32
-if %1==wc10ao32 goto wc10ao32
-if %1==wc10ap32 goto wc10ap32
-if %1==wc10asnp goto wc10asnp
-if %1==wc10-d16 goto wc10-d16
-if %1==wc10-d32 goto wc10-d32
-if %1==wc10-tnt goto wc10-tnt
-if %1==wc10-w16 goto wc10-w16
-if %1==wc10-w32 goto wc10-w32
-if %1==wc10-c32 goto wc10-c32
-if %1==wc10-o32 goto wc10-o32
-if %1==wc10-p32 goto wc10-p32
-if %1==wc10-snp goto wc10-snp
-if %1==wc11-d16 goto wc11-d16
-if %1==wc11-d32 goto wc11-d32
-if %1==wc11-tnt goto wc11-tnt
-if %1==wc11-w16 goto wc11-w16
-if %1==wc11-w32 goto wc11-w32
-if %1==wc11-c32 goto wc11-c32
-if %1==wc11-o32 goto wc11-o32
-if %1==wc11-p32 goto wc11-p32
-if %1==wc11-snp goto wc11-snp
-
-echo Usage: BUILD 'compiler_name' [DMAKE commands]
-echo.
-echo Where 'compiler_name' is of the form comp-os, where
-echo 'comp' defines the compiler and 'os' defines the OS environment.
-echo For instance 'bc50-w32' is for Borland C++ 5.0 for Win32.
-echo The value of 'comp' can be any of the following:
-echo.
-echo    bc45 - Borland C++ 4.5x
-echo    bc50 - Borland C++ 5.x
-echo    vc40 - Visual C++ 4.x
-echo    vc50 - Visual C++ 5.x
-echo    vc60 - Visual C++ 6.x
-echo    wc10 - Watcom C++ 10.6
-echo    wc11 - Watcom C++ 11.0
-echo    gcc2 - GNU C/C++ 2.9x
-echo.
-echo The value of 'os' can be one of the following:
-echo.
-echo    d16   - 16-bit DOS
-echo    d32   - 32-bit DOS
-echo    w16   - 16-bit Windows GUI mode
-echo    c32   - 32-bit Windows console mode
-echo    w32   - 32-bit Windows GUI mode
-echo    o16   - 16-bit OS/2 console mode
-echo    o32   - 32-bit OS/2 console mode
-echo    p32   - 32-bit OS/2 Presentation Manager
-echo    snp   - 32-bit SciTech Snap application
-echo    linux - 32-bit Linux application
-goto end
-
-rem -------------------------------------------------------------------------
-rem Setup for the specified compiler
-
-:bc31-d16
-call bc31-d16.bat
-goto compileit
-
-:bc45-d16
-call bc45-d16.bat
-goto compileit
-
-:bc45-d32
-call bc45-d32.bat
-goto compileit
-
-:bc45-tnt
-call bc45-tnt.bat
-goto compileit
-
-:bc45-w16
-call bc45-w16.bat
-goto compileit
-
-:bc45-w32
-call bc45-w32.bat
-goto compileit
-
-:bc45-c32
-call bc45-c32.bat
-goto compileit
-
-:bc45-vxd
-call bc45-vxd.bat
-goto compileit
-
-:bc50-d16
-call bc50-d16.bat
-goto compileit
-
-:bc50-d32
-call bc50-d32.bat
-goto compileit
-
-:bc50-tnt
-call bc50-tnt.bat
-goto compileit
-
-:bc50-w16
-call bc50-w16.bat
-goto compileit
-
-:bc50-w32
-call bc50-w32.bat
-goto compileit
-
-:bc50-c32
-call bc50-c32.bat
-goto compileit
-
-:bc50-vxd
-call bc50-vxd.bat
-goto compileit
-
-:gcc2-d32
-call gcc2-d32.bat
-goto compileit
-
-:gcc2-w32
-call gcc2-w32.bat
-goto compileit
-
-:gcc2-c32
-call gcc2-c32.bat
-goto compileit
-
-:gcc2-linux
-call gcc2-linux.bat
-goto compileit
-
-:sc70-d16
-call sc70-d16.bat
-goto compileit
-
-:sc70-w16
-call sc70-w16.bat
-goto compileit
-
-:sc70-tnt
-call sc70-tnt.bat
-goto compileit
-
-:sc70-w32
-call sc70-w32.bat
-goto compileit
-
-:sc70-c32
-call sc70-c32.bat
-goto compileit
-
-:vc40-d16
-call vc40-d16.bat
-goto compileit
-
-:vc40-tnt
-call vc40-tnt.bat
-goto compileit
-
-:vc40-w16
-call vc40-w16.bat
-goto compileit
-
-:vc40-w32
-call vc40-w32.bat
-goto compileit
-
-:vc40-c32
-call vc40-c32.bat
-goto compileit
-
-:vc40-drv9x
-call vc40-drv9x.bat
-goto compileit
-
-:vc40-drvnt
-call vc40-drvnt.bat
-goto compileit
-
-:vc40-rtt
-call vc40-rtt.bat
-goto compileit
-
-:vc50-d16
-call vc50-d16.bat
-goto compileit
-
-:vc50-tnt
-call vc50-tnt.bat
-goto compileit
-
-:vc50-w16
-call vc50-w16.bat
-goto compileit
-
-:vc50-w32
-call vc50-w32.bat
-goto compileit
-
-:vc50-c32
-call vc50-c32.bat
-goto compileit
-
-:vc50-drv9x
-call vc50-drv9x.bat
-goto compileit
-
-:vc50-drvnt
-call vc50-drvnt.bat
-goto compileit
-
-:vc50-rtt
-call vc50-rtt.bat
-goto compileit
-
-:vc60-d16
-call vc60-d16.bat
-goto compileit
-
-:vc60-tnt
-call vc60-tnt.bat
-goto compileit
-
-:vc60-w16
-call vc60-w16.bat
-goto compileit
-
-:vc60-w32
-call vc60-w32.bat
-goto compileit
-
-:vc60-c32
-call vc60-c32.bat
-goto compileit
-
-:vc60-drv9x
-call vc60-drv9x.bat
-goto compileit
-
-:vc60-drvnt
-call vc60-drvnt.bat
-goto compileit
-
-:vc60-drvw2k
-call vc60-drvw2k.bat
-goto compileit
-
-:vc60-rtt
-call vc60-rtt.bat
-goto compileit
-
-:wc10ad16
-call wc10ad16.bat
-goto compileit
-
-:wc10ad32
-call wc10ad32.bat
-goto compileit
-
-:wc10atnt
-call wc10atnt.bat
-goto compileit
-
-:wc10aw16
-call wc10aw16.bat
-goto compileit
-
-:wc10aw32
-call wc10aw32.bat
-goto compileit
-
-:wc10ac32
-call wc10ac32.bat
-goto compileit
-
-:wc10ao32
-call wc10ao32.bat
-goto compileit
-
-:wc10ap32
-call wc10ap32.bat
-goto compileit
-
-:wc10-d16
-call wc10-d16.bat
-goto compileit
-
-:wc10-d32
-call wc10-d32.bat
-goto compileit
-
-:wc10-tnt
-call wc10-tnt.bat
-goto compileit
-
-:wc10-w16
-call wc10-w16.bat
-goto compileit
-
-:wc10-w32
-call wc10-w32.bat
-goto compileit
-
-:wc10-c32
-call wc10-c32.bat
-goto compileit
-
-:wc10-o32
-call wc10-o32.bat
-goto compileit
-
-:wc10-p32
-call wc10-p32.bat
-goto compileit
-
-:wc11-d16
-call wc11-d16.bat
-goto compileit
-
-:wc11-d32
-call wc11-d32.bat
-goto compileit
-
-:wc11-tnt
-call wc11-tnt.bat
-goto compileit
-
-:wc11-w16
-call wc11-w16.bat
-goto compileit
-
-:wc11-w32
-call wc11-w32.bat
-goto compileit
-
-:wc11-c32
-call wc11-c32.bat
-goto compileit
-
-:wc11-o32
-call wc11-o32.bat
-goto compileit
-
-:wc11-p32
-call wc11-p32.bat
-goto compileit
-
-:compileit
-k_rm -f *.lib *.a
-dmake %2 %3 %4 %5 %6 %7 %8 %9
-if errorlevel 1 goto errorend
-goto end
-
-:errorend
-echo *************************************************
-echo * An error occurred while building the library. *
-echo *************************************************
-:end

board/MAI/bios_emulator/scitech/bin/cddrv.bat

@@ -1,6 +0,0 @@
-@echo off
-%1
-cd %3
-%4 %5 %6 %7 %8 %9
-%2
-

board/MAI/bios_emulator/scitech/bin/cdit

@@ -1,10 +0,0 @@
-#! /bin/sh
-
-cd $1
-PROG=$2
-shift 2
-rm -f *.lib *.a
-$PROG $*
-RET=$?
-cd ..
-exit $RET

board/MAI/bios_emulator/scitech/bin/cdit.bat

@@ -1,5 +0,0 @@
-@echo off
-cd %1
-k_rm -f *.lib *.a
-shift 1
-%1 %2 %3 %4 %5 %6 %7 %8 %9

board/MAI/bios_emulator/scitech/bin/djgpp.env

@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/release/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:

board/MAI/bios_emulator/scitech/bin/djgpp_db.env

@@ -1,46 +0,0 @@
-#= Don't edit this line unless you move djgpp.env outside
-#= of the djgpp installation directory.  If you do move
-#= it, set DJDIR to the directory you installed DJGPP in.
-#=
-DJDIR=%:/>DJGPP%
-
-+USER=dosuser
-+TMPDIR=%DJDIR%/tmp
-+EMU387=%DJDIR%/bin/emu387.dxe
-+LFN=y
-
-[bison]
-BISON_HAIRY=%DJDIR%/lib/bison.hai
-BISON_SIMPLE=%DJDIR%/lib/bison.sim
-
-[cpp]
-CPLUS_INCLUDE_PATH=%/>;CPLUS_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/lang/cxx;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-C_INCLUDE_PATH=%/>;C_INCLUDE_PATH%include;%SCITECH%/include;%PRIVATE%/include;.;%DJDIR%/include;%DJDIR%/contrib/grx20/include
-OBJCPLUS_INCLUDE_PATH=%/>;OBJCPLUS_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-OBJC_INCLUDE_PATH=%/>;OBJC_INCLUDE_PATH%%DJDIR%/include;%DJDIR%/lang/objc
-
-[gcc]
-COMPILER_PATH=%/>;COMPILER_PATH%%DJDIR%/bin
-LIBRARY_PATH=%/>;LIBRARY_PATH%%DJDIR%/lib;%DJDIR%/contrib/grx20/lib;%SCITECH%/lib/debug/dos32/dj2
-
-[info]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-INFO_COLORS=0x1f.0x31
-
-[emacs]
-INFOPATH=%/>;INFOPATH%%DJDIR%/info;%DJDIR%/gnu/emacs/info
-
-[less]
-LESSBINFMT=*k<%X>
-LESSCHARDEF=8bcccbcc12bc5b95.b127.b
-LESS=%LESS% -h5$y5$Dd2.0$Du14.0$Ds4.7$Dk9.0$
-
-[locate]
-+LOCATE_PATH=%DJDIR%/lib/locatedb.dat
-
-[ls]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[dir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:
-[vdir]
-+LS_COLORS=no=00:fi=00:di=36:lb=37;07:cd=40;33;01:ex=32:*.cmd=32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.deb=01;31:*.jpg=01;34:*.gif=01;34:*.bmp=01;34:*.ppm=01;34:*.tga=01;34:*.xbm=01;34:*.xpm=01;34:*.tif=01;34:*.mpg=01;37:*.avi=01;37:*.gl=01;37:*.dl=01;37:*~=08:*.bak=08:

board/MAI/bios_emulator/scitech/bin/findint3.bat

@@ -1 +0,0 @@
-perl c:\scitech\src\perl\findint3.per

board/MAI/bios_emulator/scitech/bin/gcc-beos.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for BeOS
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_beos.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=0
-export USE_BEOS=1
-
-echo GCC BeOS console compilation environment set up

board/MAI/bios_emulator/scitech/bin/gcc-freebsd.sh

@@ -1,16 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for FreeBSD
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_freebsd.mk
-export INCLUDE="-Iinclude -I$SCITECH/include -I$PRIVATE/include"
-export USE_X11=1
-export USE_FREEBSD=1
-
-echo GCC FreeBSD console compilation environment set up

board/MAI/bios_emulator/scitech/bin/gcc-linux.sh

@@ -1,19 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with GCC/G++ for Linux
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/gcc_linux.mk
-export INCLUDE="include;$SCITECH/include;$PRIVATE/include"
-export USE_LINUX=1
-
-if [ "x$LIBC" = x ]; then
-	echo "GCC Linux console compilation environment set up (glib)"
-else
-	echo "GCC Linux console compilation environment set up (libc5)"
-fi

board/MAI/bios_emulator/scitech/bin/gcc2-c32.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 console compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/gcc2-dos.bat

@@ -1,28 +0,0 @@
-@echo off
-REM Setup for compiling with DJGPP 2.02
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP.ENV %DJ_PATH%\DJGPP.ENV
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\dos32\dj2
-%SCITECH%\bin-dos\k_cp %SCITECH%\BIN\DJGPP_DB.ENV %DJ_PATH%\DJGPP.ENV
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set DJGPP=%DJ_PATH%\DJGPP.ENV
-set INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%DJ_PATH%\INCLUDE;
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\DJ32.MK
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set DJ_LIBBASE=dj2
-PATH %SCITECH_BIN%;%DJ_PATH%\BIN;%DEFPATH%
-
-echo DJGPP 2.02 32-bit DOS compilation environment set up (DPMI).
-

board/MAI/bios_emulator/scitech/bin/gcc2-linux.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C cross-compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\MAKEDEFS\gcc_linux.mk
-set MAKE_MODE=UNIX
-set USE_WIN16=
-set USE_WIN32=
-set WIN32_GUI=
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\cross-linux\i386-redhat-linux\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Linux console cross compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/gcc2-w32.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup for compiling with GNU C compiler
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\release\win32\gcc2
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\debug\win32\gcc2
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set INCLUDE=include;%SCITECH%\include;%PRIVATE%\include
-set MAKESTARTUP=%SCITECH%\makedefs\gcc_win32.mk
-set MAKE_MODE=
-set USE_WIN16=
-set USE_WIN32=1
-set WIN32_GUI=1
-set USE_SNAP=
-set GCC_LIBBASE=gcc2
-PATH %SCITECH_BIN%;%GCC2_PATH%\NATIVE\BIN;%DEFPATH%
-
-echo GCC 2.9.x 32-bit Win32 GUI compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/makelib.bat

@@ -1,97 +0,0 @@
-call wc11-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc11-w32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-call wc10-d32.bat
-
-cd c:\private\src\license
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\pm
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\console
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\nucleus
-dmake clean
-dmake depend
-dmake -u install
-cd c:\scitech\src\zlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd c:\private\src\graphics\ref2d
-dmake clean
-dmake depend
-dmake -u install
-cd c:\private\src\drvlib
-dmake clean
-dmake depend
-dmake -u install
-
-cd \private\src\graphics\drivers

board/MAI/bios_emulator/scitech/bin/meltobjs.sh

@@ -1,23 +0,0 @@
-#! /bin/sh
-#
-# This script generates a single object file from a set of libraries (*.a files)
-# Usage: meltobjs.sh target.o library1.a library2.a ...
-#
-# (C) SciTech Software, Inc. 1998
-#
-
-TMPDIR=/tmp/melt$$
-TARGET=$1
-TARGETDIR=$PWD
-shift
-mkdir $TMPDIR
-
-cd $TMPDIR
-
-for a in $*
-do
-    ar x $a
-done
-ld -r -o $TARGETDIR/$TARGET *.o
-
-rm -fr $TMPDIR

board/MAI/bios_emulator/scitech/bin/ntddk.bat

@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\RELEASE\NTDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\lib\i386\free;%SCITECH_LIB%\LIB\DEBUG\NTDRV\VC6;%MSVCDir%\LIB;.
-
-:done

board/MAI/bios_emulator/scitech/bin/qnx4.sh

@@ -1,18 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX4
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnx4.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/include"
-export USE_QNX=1
-export USE_QNX4=1
-export WC_LIBBASE=wc10
-
-echo Qnx 4 console compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/qnxnto.sh

@@ -1,21 +0,0 @@
-#! /bin/sh
-
-# Setup for compiling with Watcom C/C++ for QNX Neutrino
-
-if [ "$CHECKED" = "1" ]; then
-    echo Checked debug build enabled.
-else
-    echo Release build enabled.
-fi
-
-if [ X$GCC_PATH = "X" ]; then
-	export GCC_PATH=/usr/gcc/bin
-fi
-
-export MAKESTARTUP=$SCITECH/makedefs/qnxnto.mk
-export INCLUDE="-I$SCITECH/include -I$PRIVATE/include -I/usr/nto/include"
-export USE_BIOS=1	# VBIOS lib is tiny under Neutrino, always include it
-export USE_QNX=1
-export USE_QNXNTO=1
-
-echo Qnx Neutrino console compilation environment set up

board/MAI/bios_emulator/scitech/bin/set-vars-beos.sh

@@ -1,42 +0,0 @@
-#! /bin/sh
-
-# BeOS VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal BeOS installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/boot/develop/tools/gnupro/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-beos:$PATH
-#if [ "x$LIBC" = x ]; then
-#	export PATH=$PATH:$SCITECH/bin-beos/glibc
-#else
-#	export PATH=$PATH:$SCITECH/bin-beos/libc
-#fi

board/MAI/bios_emulator/scitech/bin/set-vars-freebsd.sh

@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-freebsd:$PATH

board/MAI/bios_emulator/scitech/bin/set-vars-linux.sh

@@ -1,43 +0,0 @@
-#! /bin/sh
-
-# LINUX VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export GCC_PATH=/usr/bin
-export TEMP=/tmp TMP=/tmp
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-linux:$PATH
-if [ "x$LIBC" = x ]; then
-	export PATH=$SCITECH/bin-linux/glibc:$PATH
-else
-	export PATH=$SCITECH/bin-linux/libc:$PATH
-fi

board/MAI/bios_emulator/scitech/bin/set-vars-qnx.sh

@@ -1,37 +0,0 @@
-#! /bin/sh
-
-# QNX 4 VERSION
-# Set the place where SciTech Software is installed, and where each
-# of the supported compilers is installed. These environment variables
-# are used by the batch files in the SCITECH\BIN directory.
-#
-# Modify the as appropriate for your compiler configuration (you should
-# only need to change things in this batch file).
-#
-# This version is for a normal Linux installation.
-
-# The SCITECH variable points to where batch files, makefile startups,
-# include files and source files will be found when compiling.
-
-export SCITECH=$MGL_ROOT 
-
-# The SCITECH_LIB variable points to where the SciTech libraries live
-# for installation and linking. This allows you to have the source and
-# include files on local machines for compiling and have the libraries
-# located on a common network machine (for network builds).
-
-export SCITECH_LIB=$SCITECH
-
-# The PRIVATE variable points to where private source files reside that
-# do not live in the public source tree
-
-export PRIVATE=$HOME/private
-
-# The following define the locations of all the compilers that you may
-# be using. Change them to reflect where you have installed your
-# compilers.
-
-export WC10_PATH=/usr/watcom/10.6/usr
-
-# Add the Scitech bin path to the current PATH
-export PATH=$SCITECH/bin:$SCITECH/bin-qnx:$PATH

board/MAI/bios_emulator/scitech/bin/set-vars.bat

@@ -1,110 +0,0 @@
-@echo off
-REM:=========================================================================
-REM: Master batch file to set up all necessary environment variables for
-REM: the SciTech makefile utilities. This batch file should be executed
-REM: *first* before any other batch files when you start a command shell.
-REM: You should not need to modify any batch files except this one to
-REM: configure the makefile utilities.
-REM:=========================================================================
-
-REM: Set the place where SciTech Software is installed, and where each
-REM: of the supported compilers is installed. These environment variables
-REM: are used by the batch files in the SCITECH\BIN directory.
-REM:
-REM: Modify the as appropriate for your compiler configuration (you should
-REM: only need to change things in this batch file).
-REM:
-REM: This version is for a normal MSDOS installation.
-
-REM: The SCITECH variable points to where batch files, makefile startups,
-REM: include files and source files will be found when compiling.
-
-SET SCITECH=c:\scitech
-
-REM: The SCITECH_LIB variable points to where the SciTech libraries live
-REM: for installation and linking. This allows you to have the source and
-REM: include files on local machines for compiling and have the libraries
-REM: located on a common network machine (for network builds).
-
-SET SCITECH_LIB=%SCITECH%
-
-REM: The PRIVATE variable points to where private source files reside that
-REM: do not live in the public source tree
-
-SET PRIVATE=c:\private
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. We select either DOS hosted
-REM: tools or Win32 hosted tools depending on whether you are running
-REM: on NT or not. Windows 9x users can use the Win32 hosted tools but
-REM: they run slower, but you will have long filenames if you do this.
-
-IF .%OS%==.Windows_NT goto Win32_path
-IF NOT .%WINDIR%==. goto Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-dos
-goto path_set
-
-REM: The following sets up the path to the SciTech command line utilities
-REM: for the development operating system. This version uses the Win32
-REM: hosted tools by default, so you can use long filenames.
-
-:Win32_path
-SET SCITECH_BIN=%SCITECH%\bin;%SCITECH%\bin-win32
-
-:path_set
-
-REM: Set the TMP variable for dmake if this is not already set
-
-SET TMP=%SCITECH%
-
-REM: Set the following environment variable to use the Netwide Assembler
-REM: (NASM) provided with the MGL tools to build all assembler modules.
-REM: If you have Turbo Assembler 4.0 or later and you wish to use it,
-REM: you can use it by removing the following line.
-
-SET USE_NASM=1
-
-REM: The following is used to set up DDK directories for device driver
-REM: development. They can safely be ignored unless you are using the
-REM: SciTech makefile utilities to build device drivers.
-
-SET DDKDRIVE=c:
-SET MSSDK=c:\c\win32sdk
-SET W95_DDKROOT=c:\c\95ddk
-SET W98_DDKROOT=c:\c\98ddk
-SET NT_DDKROOT=c:\c\ntddk
-SET W2K_DDKROOT=c:\c\2000ddk
-SET MASM_ROOT=c:\c\masm611
-SET VTOOLSD=c:\c\vtd95
-SET SOFTICE_PATH=c:\c\sint
-
-REM: The following define the locations of all the compilers that you may
-REM: be using. Change them to reflect where you have installed your
-REM: compilers.
-
-SET BC3_PATH=c:\c\bc3
-SET BC4_PATH=c:\c\bc45
-SET BC5_PATH=c:\c\bc50
-SET BCB5_PATH=c:\c\bcb50
-SET VC_PATH=c:\c\msvc
-SET VC4_PATH=c:\c\vc42
-SET VC5_PATH=c:\c\vc50
-SET VC6_PATH=c:\c\vc60
-SET SC70_PATH=c:\c\sc75
-SET WC10A_PATH=c:\c\wc10a
-SET WC10_PATH=c:\c\wc10
-SET WC11_PATH=c:\c\wc11
-SET TNT_PATH=c:\c\tnt
-SET DJ_PATH=c:\c\djgpp
-SET GCC2_PATH=c:\unix\usr
-
-REM: The following define the locations of the IDE and compiler path
-REM: tools for Visual C++. If you do a standard installation, you wont
-REM: need to change this. If however you did a custom install and changed
-REM: the paths to these directory, you will need to modify this to suit.
-
-SET VC5_MSDevDir=%VC5_PATH%\sharedide
-SET VC5_MSVCDir=%VC5_PATH%\vc
-SET VC6_MSDevDir=%VC6_PATH%\common\msdev98
-SET VC6_MSVCDir=%VC6_PATH%\vc98
-

board/MAI/bios_emulator/scitech/bin/vc40-c32.bat

@@ -1,36 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-d16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 DOS bit compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc40-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development
-call vc40-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC4_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-drvnt.bat

@@ -1,18 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc40-c32.bat sdk > NUL
-
-REM: Extra stuff to set up for Windows NT DDK development
-SET BASEDIR=%NT_DDKROOT%
-SET PATH=%NT_DDKROOT%\bin;%PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 4.2 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc40-snp.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 4.2 Snap compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/vc40-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 4.2 32-bit DOS compilation environment set up (TNT).

board/MAI/bios_emulator/scitech/bin/vc40-w16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC4;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC4;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET VC_LIBBASE=VC4
-SET USE_RTTARGET=
-SET USE_SNAP=
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16 bit Windows compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc40-w32.bat

@@ -1,37 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC4;%VC4_PATH%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC4_PATH%
-set C_INCLUDE=%VC4_PATH%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 4.2 32 bit Windows compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/vc40-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 4.2 32 bit edition
-
-SET LIB=%VC4_PATH%\LIB;.
-SET TOOLROOTDIR=%VC4_PATH%
-SET INCLUDE=\xc\include;%VC4_PATH%\INCLUDE
-SET INIT=%VC4_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=VC4
-PATH %SCITECH_BIN%;%VC4_PATH%\BIN;%DEFPATH%
-
-echo Visual C++ 4.2 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-c32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-d16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc50-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-drvnt.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-rtt.bat

@@ -1,30 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=1
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 RTTarget-32 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-snp.bat

@@ -1,33 +0,0 @@
-@echo off REM Setup environment variables for Visual C++ 5.0 32 bit
-edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 5.0 Snap compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC5;%VC5_PATH%\VC\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC5_PATH%\VC
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC5_PATH%\VC\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 5.0 32-bit compilation environment set up (with TNT).

board/MAI/bios_emulator/scitech/bin/vc50-w16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC5;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC5;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc50-w32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET MSDevDir=%VC5_MSDevDir%
-SET MSVCDir=%VC5_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC5;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE;
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 5.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc50-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 5.0 32 bit edition
-
-SET LIB=%VC5_PATH%\VC\LIB;.
-SET TOOLROOTDIR=%VC5_PATH%\VC
-SET INCLUDE=\xc\include;%VC5_PATH%\VC\INCLUDE
-SET INIT=%VC5_PATH%\VC
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc5
-PATH %SCITECH_BIN%;%VC5_PATH%\VC\BIN;%VC5_PATH%\SHAREDIDE\BIN;%DEFPATH%
-
-echo Visual C++ 5.0 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-c32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows console compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-d16.bat

@@ -1,26 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/vc60-drv9x.bat

@@ -1,21 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development
-call vc60-c32.bat > NUL
-
-REM: Extra stuff to set up for Windows 9x DDK development
-set MASTER_MAKE=1
-set DDKROOT=%W95_DDKROOT%
-set SDKROOT=%MSSDK%
-set C16_ROOT=%VC_PATH%
-set C32_ROOT=%VC6_PATH%
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows 9x driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-drvnt.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call ntddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows NT driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-drvw2k.bat

@@ -1,17 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-REM: First setup for Win32 console development (with Platform SDK)
-call vc60-c32.bat sdk > NUL
-
-REM: Now setup stuff for the NT DDK build environment
-call w2kddk.bat
-
-if .%CHECKED%==.1 goto checked_build
-echo Release build enabled.
-goto done
-:checked_build
-echo Checked debug build enabled.
-goto done
-:done
-echo Visual C++ 6.0 Windows Windows 2000 driver compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-snp.bat

@@ -1,33 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=
-SET WIN32_GUI=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=1
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-echo Visual C++ 6.0 Snap compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-tnt.bat

@@ -1,42 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\VC6;%VC6_PATH%\VC98\LIB;%TNT_PATH%\COFFLIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC6_PATH%\VC98
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC6_PATH%\VC98\INCLUDE;%TNT_PATH%\INCLUDE;
-set INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_TNT=
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6 PATH
-%SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=
-
-echo Visual C++ 6.0 32-bit compilation environment set up (with TNT).

board/MAI/bios_emulator/scitech/bin/vc60-w16.bat

@@ -1,27 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 1.52c 16 bit edition
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\VC6;%VC_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\VC6;%VC_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%VC_PATH%
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%VC_PATH%\INCLUDE;
-set INIT=%VC_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC_PATH%\BIN;%DEFPATH%%VC_CD_PATH%
-
-echo Visual C++ 1.52c 16-bit Windows compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/vc60-w32.bat

@@ -1,39 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET MSDevDir=%VC6_MSDevDir%
-SET MSVCDir=%VC6_MSVCDir%
-
-if .%CHECKED%==.1 goto checked_build
-set LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-set LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\VC6;%MSVCDir%\LIB;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-set TOOLROOTDIR=%MSVCDir%
-set C_INCLUDE=%MSVCDir%\INCLUDE;%TNT_PATH%\INCLUDE
-set INCLUDE=.;INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%C_INCLUDE%
-set INIT=%MSVCDir%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%MSVCDir%\BIN;%MSDevDir%\BIN;%TNT_PATH%\BIN;%DEFPATH%%VC32_CD_PATH%
-
-REM: Enable Win32 SDK if desired (sdk on command line)
-if NOT .%1%==.sdk goto done
-call win32sdk.bat
-
-:done
-echo Visual C++ 6.0 32-bit Windows compilation environment set up

board/MAI/bios_emulator/scitech/bin/vc60-x11.bat

@@ -1,20 +0,0 @@
-@echo off
-REM Setup environment variables for Visual C++ 6.0 32 bit edition
-
-SET LIB=%VC6_PATH%\VC98\LIB;.
-SET TOOLROOTDIR=%VC6_PATH%\VC98
-SET INCLUDE=\xc\include;%VC6_PATH%\VC98\INCLUDE;
-SET INIT=%VC6_PATH%\VC98
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\VC32.MK
-SET USE_TNT=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET WIN32_GUI=1
-SET USE_VXD=
-SET USE_NTDRV=
-SET USE_RTTARGET=
-SET USE_SNAP=
-SET VC_LIBBASE=vc6
-PATH %SCITECH_BIN%;%VC6_PATH%\VC98\BIN;%VC6_PATH%\COMMON\MSDEV98\BIN;%DEFPATH%
-
-echo Visual C++ 6.0 X11 compilation environment set up

board/MAI/bios_emulator/scitech/bin/w2kddk.bat

@@ -1,42 +0,0 @@
-@echo off
-REM: Set up environment variables for Microsoft Windows NT DDK development.
-REM: Note that we have hard coded this for Windows NT i386 development.
-
-SET USE_NTDRV=1
-SET USE_W2KDRV=1
-SET BASEDIR=%W2K_DDKROOT%
-SET PATH=%BASEDIR%\bin;%PATH%
-SET NTMAKEENV=%BASEDIR%\inc
-SET BUILD_MAKE_PROGRAM=nmake.exe
-SET BUILD_DEFAULT=-ei -nmake -i
-SET BUILD_DEFAULT_TARGETS=-386
-SET _OBJ_DIR=obj
-SET NEW_CRTS=1
-SET _NTROOT=%BASEDIR%
-SET INCLUDE=%BASEDIR%\inc;%BASEDIR%\inc\ddk;%INCLUDE%
-
-if .%CHECKED%==.1 goto checked
-
-REM: set up an NT free build environment
-SET DDKBUILDENV=free
-SET C_DEFINES=-D_IDWBUILD
-SET NTDBGFILES=1
-SET NTDEBUG=
-SET NTDEBUGTYPE=
-SET MSC_OPTIMIZATION=
-set LIB=%BASEDIR%\libfre\i386;%SCITECH_LIB%\LIB\RELEASE\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-goto done
-
-:checked
-
-REM: set up an NT checked build environment
-SET DDKBUILDENV=checked
-SET C_DEFINES=-D_IDWBUILD -DRDRDBG -DSRVDBG
-SET NTDBGFILES=
-SET NTDEBUG=ntsd
-SET NTDEBUGTYPE=both
-SET MSC_OPTIMIZATION=/Od /Oi
-set LIB=%BASEDIR%\libchk\i386;%SCITECH_LIB%\LIB\DEBUG\W2KDRV\VC6;%MSVCDir%\LIB;.
-
-:done

board/MAI/bios_emulator/scitech/bin/wc10-c32.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Win32 console compilation environment set up

board/MAI/bios_emulator/scitech/bin/wc10-d16.bat

@@ -1,30 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS16\WC10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS16\WC10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\WIN;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit DOS compilation environment set up.

board/MAI/bios_emulator/scitech/bin/wc10-d32.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (DOS4GW)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit DOS compilation environment set up (DOS4GW)
-

board/MAI/bios_emulator/scitech/bin/wc10-o16.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 16-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os216\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os216\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc16.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=1
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit OS/2 compilation environment set up.

board/MAI/bios_emulator/scitech/bin/wc10-o32.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit OS/2 console compilation environment set up.

board/MAI/bios_emulator/scitech/bin/wc10-p32.bat

@@ -1,31 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32-bit OS/2 mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\lib\release\os232\wc10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\lib\debug\os232\wc10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\eddat
-SET INCLUDE=include;%SCITECH%\include;%PRIVATE%\include;%WC10_PATH%\h\os2;%WC10_PATH%\h
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\makedefs\wc32.mk
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=1
-SET USE_OS2GUI=1
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=wc10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit OS/2 GUI compilation environment set up.

board/MAI/bios_emulator/scitech/bin/wc10-qnx.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode (QNX 4)
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\QNX4\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\QNX;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\QNX4\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\QNX;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\QH;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=1
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DJ_PATH%\BIN;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 32-bit QNX compilation environment set up
-

board/MAI/bios_emulator/scitech/bin/wc10-snp.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\SNAP\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\SNAP\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET WIN32_GUI=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=1
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Snap compilation environment set up

board/MAI/bios_emulator/scitech/bin/wc10-tnt.bat

@@ -1,46 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode with Phar Lap TNT
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;%TNT_PATH%\INCLUDE
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=1
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-REM If you set the following to a 1, a TNT DosStyle app will be created.
-REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*
-REM run under real DOS when using our libraries, since we require access
-REM to functions that the Win32 API does not support (such as direct access
-REM to video memory, calling Int 10h BIOS functions etc). DosStyle apps
-REM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don't
-REM work too well).
-REM
-REM If you are using the RealTime DOS extender, your apps *must* be NtStyle,
-REM and hence will never be able to run under Win95 or WinNT, only DOS.
-
-SET DOSSTYLE=1
-
-echo Watcom C/C++ 10.6 32-bit DOS compilation environment set up (TNT).

board/MAI/bios_emulator/scitech/bin/wc10-w16.bat

@@ -1,32 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 16 bit Windows mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN16\WC10;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN16\WC10;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\WIN;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC16.MK
-SET USE_WIN16=1
-SET USE_WIN32=
-SET USE_WIN386=
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-SET EDPATH=%WC10_PATH%\EDDAT
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 16-bit Windows compilation environment set up.
-

board/MAI/bios_emulator/scitech/bin/wc10-w32.bat

@@ -1,34 +0,0 @@
-@echo off
-REM Setup for compiling with Watcom C/C++ 10.6 in 32 bit mode
-
-if .%CHECKED%==.1 goto checked_build
-SET LIB=%SCITECH_LIB%\LIB\RELEASE\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Release build enabled.
-goto setvars
-
-:checked_build
-SET LIB=%SCITECH_LIB%\LIB\DEBUG\WIN32\WC10;%WC10_PATH%\LIB386;%WC10_PATH%\LIB386\NT;.
-echo Checked debug build enabled.
-goto setvars
-
-:setvars
-SET EDPATH=%WC10_PATH%\EDDAT
-SET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC10_PATH%\H;%WC10_PATH%\H\NT;
-SET WATCOM=%WC10_PATH%
-SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MK
-SET USE_TNT=
-SET USE_X32=
-SET USE_X32VM=
-SET USE_WIN16=
-SET USE_WIN32=1
-SET USE_WIN386=
-SET WIN32_GUI=1
-SET USE_OS216=
-SET USE_OS232=
-SET USE_OS2GUI=
-SET USE_SNAP=
-SET USE_QNX4=
-SET WC_LIBBASE=WC10
-PATH %SCITECH_BIN%;%WC10_PATH%\BINNT;%WC10_PATH%\BINW;%DEFPATH%%WC_CD_PATH%
-
-echo Watcom C/C++ 10.6 Win32 GUI compilation environment set up