fsl_esdhc: Remove cache snooping for i.MX

The cache snooping feature of Freescale's eSDHC IP is not available on i.MX, so
disable it globally for this architecture. This avoids setting no_snoop for all
i.MX boards, and it prevents setting a reserved bit of a reserved register if
fsl_esdhc_mmc_init() is used on i.MX, like in
arch/arm/cpu/armv7/imx-common/cpu.c/cpu_mmc_init().

Since no_snoop was only used on i.MX, get rid of it BTW.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>

board/esg/ima3-mx53/ima3-mx53.c

@@ -172,7 +172,7 @@ static void setup_iomux_fec(void)
 }
 
 #ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR, 1 };
+struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR };
 
 int board_mmc_getcd(struct mmc *mmc)
 {

board/freescale/mx51evk/mx51evk.c

@@ -47,8 +47,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
-	{MMC_SDHC2_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC2_BASE_ADDR},
 };
 #endif
 

board/freescale/mx53ard/mx53ard.c

@@ -79,8 +79,8 @@ static void setup_iomux_uart(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1 },
-	{MMC_SDHC2_BASE_ADDR, 1 },
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC2_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/freescale/mx53evk/mx53evk.c

@@ -205,8 +205,8 @@ static void setup_iomux_fec(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
-	{MMC_SDHC3_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC3_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/freescale/mx53loco/mx53loco.c

@@ -165,8 +165,8 @@ static void setup_iomux_fec(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
-	{MMC_SDHC3_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC3_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/freescale/mx53smd/mx53smd.c

@@ -129,7 +129,7 @@ static void setup_iomux_fec(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/freescale/mx6qarm2/mx6qarm2.c

@@ -116,8 +116,8 @@ static void setup_iomux_enet(void)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
-	{USDHC3_BASE_ADDR, 1},
-	{USDHC4_BASE_ADDR, 1},
+	{USDHC3_BASE_ADDR},
+	{USDHC4_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/freescale/mx6qsabrelite/mx6qsabrelite.c

@@ -239,8 +239,8 @@ int board_ehci_hcd_init(int port)
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg usdhc_cfg[2] = {
-       {USDHC3_BASE_ADDR, 1},
-       {USDHC4_BASE_ADDR, 1},
+       {USDHC3_BASE_ADDR},
+       {USDHC4_BASE_ADDR},
 };
 
 int board_mmc_getcd(struct mmc *mmc)

board/genesi/mx51_efikamx/efikamx.c

@@ -268,8 +268,8 @@ static inline void power_init(void) { }
 #ifdef CONFIG_FSL_ESDHC
 
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
-	{MMC_SDHC2_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
+	{MMC_SDHC2_BASE_ADDR},
 };
 
 static iomux_v3_cfg_t efikamx_sdhc1_pads[] = {

board/ttcontrol/vision2/vision2.c

@@ -521,7 +521,7 @@ static void setup_fec(void)
 }
 
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
-	{MMC_SDHC1_BASE_ADDR, 1},
+	{MMC_SDHC1_BASE_ADDR},
 };
 
 int get_mmc_getcd(u8 *cd, struct mmc *mmc)

drivers/mmc/fsl_esdhc.c

@@ -479,9 +479,10 @@ static int esdhc_init(struct mmc *mmc)
 	while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTA) && --timeout)
 		udelay(1000);
 
+#ifndef ARCH_MXC
 	/* Enable cache snooping */
-	if (cfg && !cfg->no_snoop)
-		esdhc_write32(&regs->scr, 0x00000040);
+	esdhc_write32(&regs->scr, 0x00000040);
+#endif
 
 	esdhc_write32(&regs->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
 

include/fsl_esdhc.h

@@ -167,7 +167,6 @@
 
 struct fsl_esdhc_cfg {
 	u32	esdhc_base;
-	u32	no_snoop;
 };
 
 /* Select the correct accessors depending on endianess */