VIDEO: davinci: add framebuffer to da8xx

The patch is a port from the framebuffer driver
of the Linux driver drivers/video/da8xx-fb.c, used
on davinci da8xx and OMAP-L138 boards.

As base for the port, the following commit (last changes
for this driver at the moment in the Linux kernel tree)
was taken:

commit 1db41e032d563eb47deab40dc5595be306b143ba
Author: axel lin <axel.lin@gmail.com>
Date:   Tue Feb 22 01:52:42 2011 +0000

    video: da8xx-fb: fix section mismatch warning

    Signed-off-by: Axel Lin <axel.lin@gmail.com>
    Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

arch/arm/include/asm/arch-davinci/da8xx-fb.h

@@ -0,0 +1,126 @@
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2008-2009 MontaVista Software Inc.
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * Based on the LCD driver for TI Avalanche processors written by
+ * Ajay Singh and Shalom Hai.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option)any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DA8XX_FB_H
+#define DA8XX_FB_H
+
+enum panel_type {
+	QVGA = 0
+};
+
+enum panel_shade {
+	MONOCHROME = 0,
+	COLOR_ACTIVE,
+	COLOR_PASSIVE,
+};
+
+enum raster_load_mode {
+	LOAD_DATA = 1,
+	LOAD_PALETTE,
+};
+
+struct display_panel {
+	enum panel_type panel_type; /* QVGA */
+	int max_bpp;
+	int min_bpp;
+	enum panel_shade panel_shade;
+};
+
+struct da8xx_panel {
+	const char	name[25];	/* Full name <vendor>_<model> */
+	unsigned short	width;
+	unsigned short	height;
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		hsw;		/* Horizontal Sync Pulse Width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		vsw;		/* Vertical Sync Pulse Width */
+	unsigned int	pxl_clk;	/* Pixel clock */
+	unsigned char	invert_pxl_clk;	/* Invert Pixel clock */
+};
+
+struct da8xx_lcdc_platform_data {
+	const char manu_name[10];
+	void *controller_data;
+	const char type[25];
+	void (*panel_power_ctrl)(int);
+};
+
+struct lcd_ctrl_config {
+	const struct display_panel *p_disp_panel;
+
+	/* AC Bias Pin Frequency */
+	int ac_bias;
+
+	/* AC Bias Pin Transitions per Interrupt */
+	int ac_bias_intrpt;
+
+	/* DMA burst size */
+	int dma_burst_sz;
+
+	/* Bits per pixel */
+	int bpp;
+
+	/* FIFO DMA Request Delay */
+	int fdd;
+
+	/* TFT Alternative Signal Mapping (Only for active) */
+	unsigned char tft_alt_mode;
+
+	/* 12 Bit Per Pixel (5-6-5) Mode (Only for passive) */
+	unsigned char stn_565_mode;
+
+	/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
+	unsigned char mono_8bit_mode;
+
+	/* Invert line clock */
+	unsigned char invert_line_clock;
+
+	/* Invert frame clock  */
+	unsigned char invert_frm_clock;
+
+	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
+	unsigned char sync_edge;
+
+	/* Horizontal and Vertical Sync: Control: 0=ignore */
+	unsigned char sync_ctrl;
+
+	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
+	unsigned char raster_order;
+};
+
+struct lcd_sync_arg {
+	int back_porch;
+	int front_porch;
+	int pulse_width;
+};
+
+void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel);
+
+#endif  /* ifndef DA8XX_FB_H */
+

drivers/video/Makefile

@@ -33,6 +33,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
 COBJS-$(CONFIG_SED156X) += sed156x.o
 COBJS-$(CONFIG_VIDEO_AMBA) += amba.o
 COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
+COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
 COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
 COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
 COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o

drivers/video/da8xx-fb.c

@@ -0,0 +1,846 @@
+/*
+ * Porting to u-boot:
+ *
+ * (C) Copyright 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2008-2009 MontaVista Software Inc.
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * Based on the LCD driver for TI Avalanche processors written by
+ * Ajay Singh and Shalom Hai.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option)any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <video_fb.h>
+#include <linux/list.h>
+#include <linux/fb.h>
+
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+#include "videomodes.h"
+#include <asm/arch/da8xx-fb.h>
+
+#define DRIVER_NAME "da8xx_lcdc"
+
+/* LCD Status Register */
+#define LCD_END_OF_FRAME1		(1 << 9)
+#define LCD_END_OF_FRAME0		(1 << 8)
+#define LCD_PL_LOAD_DONE		(1 << 6)
+#define LCD_FIFO_UNDERFLOW		(1 << 5)
+#define LCD_SYNC_LOST			(1 << 2)
+
+/* LCD DMA Control Register */
+#define LCD_DMA_BURST_SIZE(x)		((x) << 4)
+#define LCD_DMA_BURST_1			0x0
+#define LCD_DMA_BURST_2			0x1
+#define LCD_DMA_BURST_4			0x2
+#define LCD_DMA_BURST_8			0x3
+#define LCD_DMA_BURST_16		0x4
+#define LCD_END_OF_FRAME_INT_ENA	(1 << 2)
+#define LCD_DUAL_FRAME_BUFFER_ENABLE	(1 << 0)
+
+/* LCD Control Register */
+#define LCD_CLK_DIVISOR(x)		((x) << 8)
+#define LCD_RASTER_MODE			0x01
+
+/* LCD Raster Control Register */
+#define LCD_PALETTE_LOAD_MODE(x)	((x) << 20)
+#define PALETTE_AND_DATA		0x00
+#define PALETTE_ONLY			0x01
+#define DATA_ONLY			0x02
+
+#define LCD_MONO_8BIT_MODE		(1 << 9)
+#define LCD_RASTER_ORDER		(1 << 8)
+#define LCD_TFT_MODE			(1 << 7)
+#define LCD_UNDERFLOW_INT_ENA		(1 << 6)
+#define LCD_PL_ENABLE			(1 << 4)
+#define LCD_MONOCHROME_MODE		(1 << 1)
+#define LCD_RASTER_ENABLE		(1 << 0)
+#define LCD_TFT_ALT_ENABLE		(1 << 23)
+#define LCD_STN_565_ENABLE		(1 << 24)
+
+/* LCD Raster Timing 2 Register */
+#define LCD_AC_BIAS_TRANSITIONS_PER_INT(x)	((x) << 16)
+#define LCD_AC_BIAS_FREQUENCY(x)		((x) << 8)
+#define LCD_SYNC_CTRL				(1 << 25)
+#define LCD_SYNC_EDGE				(1 << 24)
+#define LCD_INVERT_PIXEL_CLOCK			(1 << 22)
+#define LCD_INVERT_LINE_CLOCK			(1 << 21)
+#define LCD_INVERT_FRAME_CLOCK			(1 << 20)
+
+/* LCD Block */
+struct da8xx_lcd_regs {
+	u32	revid;
+	u32	ctrl;
+	u32	stat;
+	u32	lidd_ctrl;
+	u32	lidd_cs0_conf;
+	u32	lidd_cs0_addr;
+	u32	lidd_cs0_data;
+	u32	lidd_cs1_conf;
+	u32	lidd_cs1_addr;
+	u32	lidd_cs1_data;
+	u32	raster_ctrl;
+	u32	raster_timing_0;
+	u32	raster_timing_1;
+	u32	raster_timing_2;
+	u32	raster_subpanel;
+	u32	reserved;
+	u32	dma_ctrl;
+	u32	dma_frm_buf_base_addr_0;
+	u32	dma_frm_buf_ceiling_addr_0;
+	u32	dma_frm_buf_base_addr_1;
+	u32	dma_frm_buf_ceiling_addr_1;
+};
+
+#define LCD_NUM_BUFFERS	1
+
+#define WSI_TIMEOUT	50
+#define PALETTE_SIZE	256
+#define LEFT_MARGIN	64
+#define RIGHT_MARGIN	64
+#define UPPER_MARGIN	32
+#define LOWER_MARGIN	32
+
+#define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
+#define mdelay(n) ({unsigned long msec = (n); while (msec--) udelay(1000); })
+
+static struct da8xx_lcd_regs *da8xx_fb_reg_base;
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* graphics setup */
+static GraphicDevice gpanel;
+static const struct da8xx_panel *lcd_panel;
+static struct fb_info *da8xx_fb_info;
+static int bits_x_pixel;
+
+static inline unsigned int lcdc_read(u32 *addr)
+{
+	return (unsigned int)readl(addr);
+}
+
+static inline void lcdc_write(unsigned int val, u32 *addr)
+{
+	writel(val, addr);
+}
+
+struct da8xx_fb_par {
+	u32			 p_palette_base;
+	unsigned char *v_palette_base;
+	dma_addr_t		vram_phys;
+	unsigned long		vram_size;
+	void			*vram_virt;
+	unsigned int		dma_start;
+	unsigned int		dma_end;
+	struct clk *lcdc_clk;
+	int irq;
+	unsigned short pseudo_palette[16];
+	unsigned int palette_sz;
+	unsigned int pxl_clk;
+	int blank;
+	int			vsync_flag;
+	int			vsync_timeout;
+};
+
+
+/* Variable Screen Information */
+static struct fb_var_screeninfo da8xx_fb_var = {
+	.xoffset = 0,
+	.yoffset = 0,
+	.transp = {0, 0, 0},
+	.nonstd = 0,
+	.activate = 0,
+	.height = -1,
+	.width = -1,
+	.pixclock = 46666,	/* 46us - AUO display */
+	.accel_flags = 0,
+	.left_margin = LEFT_MARGIN,
+	.right_margin = RIGHT_MARGIN,
+	.upper_margin = UPPER_MARGIN,
+	.lower_margin = LOWER_MARGIN,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED
+};
+
+static struct fb_fix_screeninfo da8xx_fb_fix = {
+	.id = "DA8xx FB Drv",
+	.type = FB_TYPE_PACKED_PIXELS,
+	.type_aux = 0,
+	.visual = FB_VISUAL_PSEUDOCOLOR,
+	.xpanstep = 0,
+	.ypanstep = 1,
+	.ywrapstep = 0,
+	.accel = FB_ACCEL_NONE
+};
+
+static const struct display_panel disp_panel = {
+	QVGA,
+	16,
+	16,
+	COLOR_ACTIVE,
+};
+
+static const struct lcd_ctrl_config lcd_cfg = {
+	&disp_panel,
+	.ac_bias		= 255,
+	.ac_bias_intrpt		= 0,
+	.dma_burst_sz		= 16,
+	.bpp			= 16,
+	.fdd			= 255,
+	.tft_alt_mode		= 0,
+	.stn_565_mode		= 0,
+	.mono_8bit_mode		= 0,
+	.invert_line_clock	= 1,
+	.invert_frm_clock	= 1,
+	.sync_edge		= 0,
+	.sync_ctrl		= 1,
+	.raster_order		= 0,
+};
+
+/* Enable the Raster Engine of the LCD Controller */
+static inline void lcd_enable_raster(void)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
+	if (!(reg & LCD_RASTER_ENABLE))
+		lcdc_write(reg | LCD_RASTER_ENABLE,
+			&da8xx_fb_reg_base->raster_ctrl);
+}
+
+/* Disable the Raster Engine of the LCD Controller */
+static inline void lcd_disable_raster(void)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
+	if (reg & LCD_RASTER_ENABLE)
+		lcdc_write(reg & ~LCD_RASTER_ENABLE,
+			&da8xx_fb_reg_base->raster_ctrl);
+}
+
+static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
+{
+	u32 start;
+	u32 end;
+	u32 reg_ras;
+	u32 reg_dma;
+
+	/* init reg to clear PLM (loading mode) fields */
+	reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
+	reg_ras &= ~(3 << 20);
+
+	reg_dma  = lcdc_read(&da8xx_fb_reg_base->dma_ctrl);
+
+	if (load_mode == LOAD_DATA) {
+		start    = par->dma_start;
+		end      = par->dma_end;
+
+		reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
+		reg_dma |= LCD_END_OF_FRAME_INT_ENA;
+
+#if (LCD_NUM_BUFFERS == 2)
+		reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
+		lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+		lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+		lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
+		lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
+#else
+		reg_dma &= ~LCD_DUAL_FRAME_BUFFER_ENABLE;
+		lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+		lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+		lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
+		lcdc_write(0, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
+#endif
+
+	} else if (load_mode == LOAD_PALETTE) {
+		start    = par->p_palette_base;
+		end      = start + par->palette_sz - 1;
+
+		reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
+		reg_ras |= LCD_PL_ENABLE;
+
+		lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+		lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+	}
+
+	lcdc_write(reg_dma, &da8xx_fb_reg_base->dma_ctrl);
+	lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
+
+	/*
+	 * The Raster enable bit must be set after all other control fields are
+	 * set.
+	 */
+	lcd_enable_raster();
+}
+
+/* Configure the Burst Size of DMA */
+static int lcd_cfg_dma(int burst_size)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->dma_ctrl) & 0x00000001;
+	switch (burst_size) {
+	case 1:
+		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_1);
+		break;
+	case 2:
+		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_2);
+		break;
+	case 4:
+		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_4);
+		break;
+	case 8:
+		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_8);
+		break;
+	case 16:
+		reg |= LCD_DMA_BURST_SIZE(LCD_DMA_BURST_16);
+		break;
+	default:
+		return -EINVAL;
+	}
+	lcdc_write(reg, &da8xx_fb_reg_base->dma_ctrl);
+
+	return 0;
+}
+
+static void lcd_cfg_ac_bias(int period, int transitions_per_int)
+{
+	u32 reg;
+
+	/* Set the AC Bias Period and Number of Transisitons per Interrupt */
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2) & 0xFFF00000;
+	reg |= LCD_AC_BIAS_FREQUENCY(period) |
+		LCD_AC_BIAS_TRANSITIONS_PER_INT(transitions_per_int);
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
+}
+
+static void lcd_cfg_horizontal_sync(int back_porch, int pulse_width,
+		int front_porch)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0) & 0xf;
+	reg |= ((back_porch & 0xff) << 24)
+	    | ((front_porch & 0xff) << 16)
+	    | ((pulse_width & 0x3f) << 10);
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
+}
+
+static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
+		int front_porch)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1) & 0x3ff;
+	reg |= ((back_porch & 0xff) << 24)
+	    | ((front_porch & 0xff) << 16)
+	    | ((pulse_width & 0x3f) << 10);
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
+}
+
+static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
+{
+	u32 reg;
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
+						LCD_MONO_8BIT_MODE |
+						LCD_MONOCHROME_MODE);
+
+	switch (cfg->p_disp_panel->panel_shade) {
+	case MONOCHROME:
+		reg |= LCD_MONOCHROME_MODE;
+		if (cfg->mono_8bit_mode)
+			reg |= LCD_MONO_8BIT_MODE;
+		break;
+	case COLOR_ACTIVE:
+		reg |= LCD_TFT_MODE;
+		if (cfg->tft_alt_mode)
+			reg |= LCD_TFT_ALT_ENABLE;
+		break;
+
+	case COLOR_PASSIVE:
+		if (cfg->stn_565_mode)
+			reg |= LCD_STN_565_ENABLE;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* enable additional interrupts here */
+	reg |= LCD_UNDERFLOW_INT_ENA;
+
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
+
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
+
+	if (cfg->sync_ctrl)
+		reg |= LCD_SYNC_CTRL;
+	else
+		reg &= ~LCD_SYNC_CTRL;
+
+	if (cfg->sync_edge)
+		reg |= LCD_SYNC_EDGE;
+	else
+		reg &= ~LCD_SYNC_EDGE;
+
+	if (cfg->invert_line_clock)
+		reg |= LCD_INVERT_LINE_CLOCK;
+	else
+		reg &= ~LCD_INVERT_LINE_CLOCK;
+
+	if (cfg->invert_frm_clock)
+		reg |= LCD_INVERT_FRAME_CLOCK;
+	else
+		reg &= ~LCD_INVERT_FRAME_CLOCK;
+
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
+
+	return 0;
+}
+
+static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
+		u32 bpp, u32 raster_order)
+{
+	u32 reg;
+
+	/* Set the Panel Width */
+	/* Pixels per line = (PPL + 1)*16 */
+	/*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
+	width &= 0x3f0;
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
+	reg &= 0xfffffc00;
+	reg |= ((width >> 4) - 1) << 4;
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
+
+	/* Set the Panel Height */
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
+	reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
+
+	/* Set the Raster Order of the Frame Buffer */
+	reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
+	if (raster_order)
+		reg |= LCD_RASTER_ORDER;
+	lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
+
+	switch (bpp) {
+	case 1:
+	case 2:
+	case 4:
+	case 16:
+		par->palette_sz = 16 * 2;
+		break;
+
+	case 8:
+		par->palette_sz = 256 * 2;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			      unsigned blue, unsigned transp,
+			      struct fb_info *info)
+{
+	struct da8xx_fb_par *par = info->par;
+	unsigned short *palette = (unsigned short *) par->v_palette_base;
+	u_short pal;
+	int update_hw = 0;
+
+	if (regno > 255)
+		return 1;
+
+	if (info->fix.visual == FB_VISUAL_DIRECTCOLOR)
+		return 1;
+
+	if (info->var.bits_per_pixel == 8) {
+		red >>= 4;
+		green >>= 8;
+		blue >>= 12;
+
+		pal = (red & 0x0f00);
+		pal |= (green & 0x00f0);
+		pal |= (blue & 0x000f);
+
+		if (palette[regno] != pal) {
+			update_hw = 1;
+			palette[regno] = pal;
+		}
+	} else if ((info->var.bits_per_pixel == 16) && regno < 16) {
+		red >>= (16 - info->var.red.length);
+		red <<= info->var.red.offset;
+
+		green >>= (16 - info->var.green.length);
+		green <<= info->var.green.offset;
+
+		blue >>= (16 - info->var.blue.length);
+		blue <<= info->var.blue.offset;
+
+		par->pseudo_palette[regno] = red | green | blue;
+
+		if (palette[0] != 0x4000) {
+			update_hw = 1;
+			palette[0] = 0x4000;
+		}
+	}
+
+	/* Update the palette in the h/w as needed. */
+	if (update_hw)
+		lcd_blit(LOAD_PALETTE, par);
+
+	return 0;
+}
+
+static void lcd_reset(struct da8xx_fb_par *par)
+{
+	/* Disable the Raster if previously Enabled */
+	lcd_disable_raster();
+
+	/* DMA has to be disabled */
+	lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
+	lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
+}
+
+static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
+{
+	unsigned int lcd_clk, div;
+
+	/* Get clock from sysclk2 */
+	lcd_clk = clk_get(2);
+
+	div = lcd_clk / par->pxl_clk;
+	debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n",
+		lcd_clk, div, par->pxl_clk);
+
+	/* Configure the LCD clock divisor. */
+	lcdc_write(LCD_CLK_DIVISOR(div) |
+			(LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
+}
+
+static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
+		const struct da8xx_panel *panel)
+{
+	u32 bpp;
+	int ret = 0;
+
+	lcd_reset(par);
+
+	/* Calculate the divider */
+	lcd_calc_clk_divider(par);
+
+	if (panel->invert_pxl_clk)
+		lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) |
+			LCD_INVERT_PIXEL_CLOCK),
+			 &da8xx_fb_reg_base->raster_timing_2);
+	else
+		lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_timing_2) &
+			~LCD_INVERT_PIXEL_CLOCK),
+			&da8xx_fb_reg_base->raster_timing_2);
+
+	/* Configure the DMA burst size. */
+	ret = lcd_cfg_dma(cfg->dma_burst_sz);
+	if (ret < 0)
+		return ret;
+
+	/* Configure the AC bias properties. */
+	lcd_cfg_ac_bias(cfg->ac_bias, cfg->ac_bias_intrpt);
+
+	/* Configure the vertical and horizontal sync properties. */
+	lcd_cfg_vertical_sync(panel->vbp, panel->vsw, panel->vfp);
+	lcd_cfg_horizontal_sync(panel->hbp, panel->hsw, panel->hfp);
+
+	/* Configure for disply */
+	ret = lcd_cfg_display(cfg);
+	if (ret < 0)
+		return ret;
+
+	if (QVGA != cfg->p_disp_panel->panel_type)
+		return -EINVAL;
+
+	if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
+	    cfg->bpp >= cfg->p_disp_panel->min_bpp)
+		bpp = cfg->bpp;
+	else
+		bpp = cfg->p_disp_panel->max_bpp;
+	if (bpp == 12)
+		bpp = 16;
+	ret = lcd_cfg_frame_buffer(par, (unsigned int)panel->width,
+				(unsigned int)panel->height, bpp,
+				cfg->raster_order);
+	if (ret < 0)
+		return ret;
+
+	/* Configure FDD */
+	lcdc_write((lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & 0xfff00fff) |
+		       (cfg->fdd << 12), &da8xx_fb_reg_base->raster_ctrl);
+
+	return 0;
+}
+
+static void lcdc_dma_start(void)
+{
+	struct da8xx_fb_par *par = da8xx_fb_info->par;
+	lcdc_write(par->dma_start,
+		&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+	lcdc_write(par->dma_end,
+		&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+	lcdc_write(0,
+		&da8xx_fb_reg_base->dma_frm_buf_base_addr_1);
+	lcdc_write(0,
+		&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
+}
+
+static u32 lcdc_irq_handler(void)
+{
+	struct da8xx_fb_par *par = da8xx_fb_info->par;
+	u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
+	u32 reg_ras;
+
+	if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
+		debug("LCD_SYNC_LOST\n");
+		lcd_disable_raster();
+		lcdc_write(stat, &da8xx_fb_reg_base->stat);
+		lcd_enable_raster();
+		return LCD_SYNC_LOST;
+	} else if (stat & LCD_PL_LOAD_DONE) {
+		debug("LCD_PL_LOAD_DONE\n");
+		/*
+		 * Must disable raster before changing state of any control bit.
+		 * And also must be disabled before clearing the PL loading
+		 * interrupt via the following write to the status register. If
+		 * this is done after then one gets multiple PL done interrupts.
+		 */
+		lcd_disable_raster();
+
+		lcdc_write(stat, &da8xx_fb_reg_base->stat);
+
+		/* Disable PL completion inerrupt */
+		reg_ras  = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
+		reg_ras &= ~LCD_PL_ENABLE;
+		lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
+
+		/* Setup and start data loading mode */
+		lcd_blit(LOAD_DATA, par);
+		return LCD_PL_LOAD_DONE;
+	} else {
+		lcdc_write(stat, &da8xx_fb_reg_base->stat);
+
+		if (stat & LCD_END_OF_FRAME0)
+			debug("LCD_END_OF_FRAME0\n");
+
+		lcdc_write(par->dma_start,
+			&da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+		lcdc_write(par->dma_end,
+			&da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+		par->vsync_flag = 1;
+		return LCD_END_OF_FRAME0;
+	}
+	return stat;
+}
+
+static u32 wait_for_event(u32 event)
+{
+	u32 timeout = 50000;
+	u32 ret;
+
+	do {
+		ret = lcdc_irq_handler();
+		udelay(1000);
+	} while (!(ret & event));
+
+	if (timeout <= 0) {
+		printf("%s: event %d not hit\n", __func__, event);
+		return -1;
+	}
+
+	return 0;
+
+}
+
+void *video_hw_init(void)
+{
+	struct da8xx_fb_par *par;
+	int ret;
+	u32 size;
+	char *p;
+
+	if (!lcd_panel) {
+		printf("Display not initialized\n");
+		return NULL;
+	}
+	gpanel.winSizeX = lcd_panel->width;
+	gpanel.winSizeY = lcd_panel->height;
+	gpanel.plnSizeX = lcd_panel->width;
+	gpanel.plnSizeY = lcd_panel->height;
+
+	switch (bits_x_pixel) {
+	case 24:
+		gpanel.gdfBytesPP = 4;
+		gpanel.gdfIndex = GDF_32BIT_X888RGB;
+		break;
+	case 16:
+		gpanel.gdfBytesPP = 2;
+		gpanel.gdfIndex = GDF_16BIT_565RGB;
+		break;
+	default:
+		gpanel.gdfBytesPP = 1;
+		gpanel.gdfIndex = GDF__8BIT_INDEX;
+		break;
+	}
+
+	da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE;
+
+	debug("Resolution: %dx%d %x\n",
+		gpanel.winSizeX,
+		gpanel.winSizeY,
+		lcd_cfg.bpp);
+
+	size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
+	da8xx_fb_info = malloc(size);
+	debug("da8xx_fb_info at %x\n", (unsigned int)da8xx_fb_info);
+
+	if (!da8xx_fb_info) {
+		printf("Memory allocation failed for fb_info\n");
+		return NULL;
+	}
+	memset(da8xx_fb_info, 0, size);
+	p = (char *)da8xx_fb_info;
+	da8xx_fb_info->par = p +  sizeof(struct fb_info);
+	debug("da8xx_par at %x\n", (unsigned int)da8xx_fb_info->par);
+
+	par = da8xx_fb_info->par;
+	par->pxl_clk = lcd_panel->pxl_clk;
+
+	if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) {
+		printf("lcd_init failed\n");
+		ret = -EFAULT;
+		goto err_release_fb;
+	}
+
+	/* allocate frame buffer */
+	par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp;
+	par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
+
+	par->vram_virt = malloc(par->vram_size);
+
+	par->vram_phys = (dma_addr_t) par->vram_virt;
+	debug("Requesting 0x%x bytes for framebuffer at 0x%x\n",
+		(unsigned int)par->vram_size,
+		(unsigned int)par->vram_virt);
+	if (!par->vram_virt) {
+		printf("GLCD: malloc for frame buffer failed\n");
+		ret = -EINVAL;
+		goto err_release_fb;
+	}
+
+	gpanel.frameAdrs = (unsigned int)par->vram_virt;
+	da8xx_fb_info->screen_base = (char *) par->vram_virt;
+	da8xx_fb_fix.smem_start	= gpanel.frameAdrs;
+	da8xx_fb_fix.smem_len = par->vram_size;
+	da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8;
+
+	par->dma_start = par->vram_phys;
+	par->dma_end   = par->dma_start + lcd_panel->height *
+		da8xx_fb_fix.line_length - 1;
+
+	/* allocate palette buffer */
+	par->v_palette_base = malloc(PALETTE_SIZE);
+	if (!par->v_palette_base) {
+		printf("GLCD: malloc for palette buffer failed\n");
+		goto err_release_fb_mem;
+	}
+	memset(par->v_palette_base, 0, PALETTE_SIZE);
+	par->p_palette_base = (unsigned int)par->v_palette_base;
+
+	/* Initialize par */
+	da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp;
+
+	da8xx_fb_var.xres = lcd_panel->width;
+	da8xx_fb_var.xres_virtual = lcd_panel->width;
+
+	da8xx_fb_var.yres         = lcd_panel->height;
+	da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
+
+	da8xx_fb_var.grayscale =
+	    lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
+	da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp;
+
+	da8xx_fb_var.hsync_len = lcd_panel->hsw;
+	da8xx_fb_var.vsync_len = lcd_panel->vsw;
+
+	/* Initialize fbinfo */
+	da8xx_fb_info->flags = FBINFO_FLAG_DEFAULT;
+	da8xx_fb_info->fix = da8xx_fb_fix;
+	da8xx_fb_info->var = da8xx_fb_var;
+	da8xx_fb_info->pseudo_palette = par->pseudo_palette;
+	da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ?
+				FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR;
+
+	/* Clear interrupt */
+	memset((void *)par->vram_virt, 0, par->vram_size);
+	lcd_disable_raster();
+	lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
+	debug("Palette at 0x%x size %d\n", par->p_palette_base,
+		par->palette_sz);
+	lcdc_dma_start();
+
+	/* Load a default palette */
+	fb_setcolreg(0, 0, 0, 0, 0xffff, da8xx_fb_info);
+
+	/* Check that the palette is loaded */
+	wait_for_event(LCD_PL_LOAD_DONE);
+
+	/* Wait until DMA is working */
+	wait_for_event(LCD_END_OF_FRAME0);
+
+	return (void *)&gpanel;
+
+err_release_fb_mem:
+	free(par->vram_virt);
+
+err_release_fb:
+	free(da8xx_fb_info);
+
+	return NULL;
+}
+
+void video_set_lut(unsigned int index,	/* color number */
+		    unsigned char r,	/* red */
+		    unsigned char g,	/* green */
+		    unsigned char b	/* blue */
+		    )
+{
+
+	return;
+}
+
+void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel)
+{
+	lcd_panel = panel;
+	bits_x_pixel = bits_pixel;
+}