mxs: Properly setup VDDD in power supply setup code

The memory setup code adjusted the VDDD voltage. Remove this adjustment
and configure the VDDD voltage correctly in the power supply setup code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>

arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c

@@ -171,17 +171,6 @@ void mxs_mem_setup_vdda(void)
 		&power_regs->hw_power_vddactrl);
 }
 
-void mxs_mem_setup_vddd(void)
-{
-	struct mxs_power_regs *power_regs =
-		(struct mxs_power_regs *)MXS_POWER_BASE;
-
-	writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) |
-		(0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) |
-		POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW,
-		&power_regs->hw_power_vdddctrl);
-}
-
 uint32_t mxs_mem_get_size(void)
 {
 	uint32_t sz, da;
@@ -241,8 +230,6 @@ void mxs_mem_init(void)
 	while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
 		;
 
-	mxs_mem_setup_vddd();
-
 	early_delay(10000);
 
 	mxs_mem_setup_cpu_and_hbus();

arch/arm/cpu/arm926ejs/mxs/spl_power_init.c

@@ -897,7 +897,7 @@ void mxs_power_init(void)
 	mxs_enable_output_rail_protection();
 
 	mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
-	mxs_power_set_vddx(&mxs_vddd_cfg, 1350, 1200);
+	mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
 
 	writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
 		POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |