da850/omap-l138: Add support for NAND SPL

This patch adds configuration required for NAND SP
on DA850/OMAP-L138.

Tested-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>

include/configs/da850evm.h

@@ -192,6 +192,32 @@
 #define CONFIG_SYS_ALE_MASK		0x8
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
+#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE	(2 << 10)
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x28000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
+#define CONFIG_SYS_NAND_U_BOOT_DST	0xc1080000
+#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_DST - \
+					CONFIG_SYS_NAND_U_BOOT_SIZE - \
+					CONFIG_SYS_MALLOC_LEN -       \
+					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_NAND_ECCPOS		{				\
+				24, 25, 26, 27, 28, \
+				29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
+				39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
+				49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
+				59, 60, 61, 62, 63 }
+#define CONFIG_SYS_NAND_PAGE_COUNT	64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
+#define CONFIG_SYS_NAND_ECCSIZE		512
+#define CONFIG_SYS_NAND_ECCBYTES	10
+#define CONFIG_SYS_NAND_OOBSIZE		64
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_LOAD
 #endif
 
 /*