Patch by Yuli Barcohen, 19 Apr 2004:

- Rename DUET_ADS to MPC885ADS
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
- Clean up FADS family port to use the new defines

CHANGELOG

@@ -2,6 +2,12 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Yuli Barcohen, 19 Apr 2004:
+  - Rename DUET_ADS to MPC885ADS
+  - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+  - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+  - Clean up FADS family port to use the new defines
+
 * Fix PCI support on CPC45 board
 
 * Patch by Scott McNutt, 25 Apr 2004:

MAKEALL

@@ -34,7 +34,7 @@ LIST_5xxx="	\
 
 LIST_8xx="	\
 	AdderII		ADS860		AMX860		c2mon		\
-	CCM		cogent_mpc8xx	DUET_ADS	ESTEEM192E	\
+	CCM		cogent_mpc8xx	MPC885ADS	ESTEEM192E	\
 	ETX094		ELPT860		FADS823		FADS850SAR	\
 	FADS860T	FLAGADM		FPS850L		GEN860T		\
 	GEN860T_SC	GENIETV		GTH		hermes		\

Makefile

@@ -266,10 +266,10 @@ AdderII_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx adderII
 
 ADS860_config     \
-DUET_ADS_config   \
 FADS823_config    \
 FADS850SAR_config \
 MPC86xADS_config  \
+MPC885ADS_config  \
 FADS860T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx fads
 

board/fads/config.mk

@@ -24,8 +24,8 @@
 #
 
 #
-# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and DUET
-# (MPC87x/88x) ADS boards
+# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and
+# MPC885ADS boards
 #
 
 TEXT_BASE = 0xFE000000

board/fads/fads.c

@@ -26,12 +26,13 @@
 #include <config.h>
 #include <common.h>
 #include <mpc8xx.h>
+#include <pcmcia.h>
 
 #define	_NOT_USED_	0xFFFFFFFF
 
 /* ========================================================================= */
 
-#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
+#ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
 
 #if defined(CONFIG_DRAM_50MHZ)
 /* 50MHz tables */
@@ -290,7 +291,7 @@ static void _dramdisable(void)
 
 	/* maybe we should turn off upma here or something */
 }
-#endif /* !CONFIG_DUET_ADS */
+#endif /* !CONFIG_MPC885ADS */
 
 /* ========================================================================= */
 
@@ -604,7 +605,7 @@ long int initdram (int board_type)
 	uint sdramsz = 0;	/* size of sdram in Mbytes */
 	uint base = 0;		/* base of dram in bytes */
 	uint m = 0;		/* size of dram in Mbytes */
-#ifndef CONFIG_DUET_ADS
+#ifndef CONFIG_MPC885ADS
 	uint k, s;
 #endif
 
@@ -614,7 +615,7 @@ long int initdram (int board_type)
 		printf ("(%u MB SDRAM) ", sdramsz);
 	}
 #endif
-#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
+#ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
 	k = (*((uint *) BCSR2) >> 23) & 0x0f;
 
 	switch (k & 0x3) {
@@ -665,7 +666,7 @@ long int initdram (int board_type)
 		_dramdisable ();
 		m = 0;
 	}
-#endif /* !CONFIG_DUET_ADS */
+#endif /* !CONFIG_MPC885ADS */
 	m += sdramsz;				/* add sdram size to total */
 
 	return (m << 20);
@@ -734,8 +735,8 @@ int checkboard (void)
 
 #if defined(CONFIG_MPC86xADS)
 	puts ("MPC86xADS");
-#elif defined(CONFIG_DUET_ADS)
-	puts ("DUET ADS");
+#elif defined(CONFIG_MPC885ADS)
+	puts ("MPC885ADS");
 	r = 0; /* I've got NR (No Revision) board */
 #elif defined(CONFIG_FADS)
 	puts ("FADS");
@@ -759,7 +760,7 @@ int checkboard (void)
 	case 0x03:
 		puts ("B \n");
 		break;
-#elif defined(CONFIG_DUET_ADS)
+#elif defined(CONFIG_MPC885ADS)
 	case 0x00:
 		puts ("NR\n");
 		break;
@@ -790,7 +791,7 @@ volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
 int pcmcia_init(void)
 {
 	volatile pcmconf8xx_t	*pcmp;
-	uint v, slota, slotb;
+	uint v, slota = 0, slotb = 0;
 
 	/*
 	** Enable the PCMCIA for a Flash card.
@@ -805,10 +806,10 @@ int pcmcia_init(void)
 	/* Set all slots to zero by default. */
 	pcmp->pcmc_pgcra = 0;
 	pcmp->pcmc_pgcrb = 0;
-#ifdef PCMCIA_SLOT_A
+#ifdef CONFIG_PCMCIA_SLOT_A
 	pcmp->pcmc_pgcra = 0x40;
 #endif
-#ifdef PCMCIA_SLOT_B
+#ifdef CONFIG_PCMCIA_SLOT_B
 	pcmp->pcmc_pgcrb = 0x40;
 #endif
 
@@ -817,17 +818,17 @@ int pcmcia_init(void)
 
 	/* Check if any PCMCIA card is plugged in. */
 
+#ifdef CONFIG_PCMCIA_SLOT_A
 	slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+#endif
+#ifdef CONFIG_PCMCIA_SLOT_B
 	slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+#endif
 
 	if (!(slota || slotb)) {
 		printf("No card present\n");
-#ifdef PCMCIA_SLOT_A
 		pcmp->pcmc_pgcra = 0;
-#endif
-#ifdef PCMCIA_SLOT_B
 		pcmp->pcmc_pgcrb = 0;
-#endif
 		return -1;
 	}
 	else
@@ -908,9 +909,10 @@ int pcmcia_init(void)
 
 	udelay(20);
 
-#ifdef PCMCIA_SLOT_A
+#ifdef CONFIG_PCMCIA_SLOT_A
 	pcmp->pcmc_pgcra = 0;
-#elif PCMCIA_SLOT_B
+#endif
+#ifdef CONFIG_PCMCIA_SLOT_B
 	pcmp->pcmc_pgcrb = 0;
 #endif
 

board/fads/fads.h

@@ -48,9 +48,6 @@
  * | ...                   |                                 v
  *
  *****************************************************************************/
-/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
-/* in general, we always know this for FADS+new ADS anyway */
-#define CONFIG_8xx_GCLK_FREQ     ((CFG_8XX_XIN) * (CFG_8XX_FACT))
 
 #if 0
 #define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
@@ -66,6 +63,7 @@
     "bootm"
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_BZIP2	 /* include support for bzip2 compressed images */
 
 /*
  * New MPC86xADS and Duet provide two Ethernet connectivity options:
@@ -90,11 +88,12 @@
 #endif
 
 #ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS	(CONFIG_CMD_DFL  \
-			 | CFG_CMD_DHCP  \
-			 | CFG_CMD_IMMAP \
-			 | CFG_CMD_MII   \
-			 | CFG_CMD_PING  \
+#define CONFIG_COMMANDS	(CONFIG_CMD_DFL   \
+			 | CFG_CMD_DHCP   \
+			 | CFG_CMD_IMMAP  \
+			 | CFG_CMD_MII    \
+			 | CFG_CMD_PCMCIA \
+			 | CFG_CMD_PING   \
 			)
 #endif /* !CONFIG_COMMANDS */
 
@@ -146,7 +145,7 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define	CFG_SDRAM_BASE		0x00000000
-#if defined(CONFIG_MPC86xADS) || defined(CONFIG_DUET_ADS) /* New ADS or Duet */
+#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
 #define	CFG_SDRAM_SIZE		0x00800000      	/* 8 Mbyte */
 #elif defined(CONFIG_FADS)				/* Old/new FADS */
 #define	CFG_SDRAM_SIZE		0x00400000		/* 4 Mbyte */
@@ -186,7 +185,12 @@
 
 #define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
+
+#ifdef CONFIG_BZIP2
+#define	CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
+#else
 #define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+#endif /* CONFIG_BZIP2 */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
@@ -248,7 +252,16 @@
 #define SCCR_MASK	SCCR_EBDF11
 #define CFG_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
 
- /*-----------------------------------------------------------------------
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		14-22
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control
+ */
+#ifndef CFG_PLPRCR
+#define CFG_PLPRCR	PLPRCR_TEXPS
+#endif
+
+/*-----------------------------------------------------------------------
  *
  *-----------------------------------------------------------------------
  *
@@ -407,6 +420,20 @@
 #define BCSR4_DATA_VOICE         ((uint)0x00080000)
 #endif /* CONFIG_MPC850 */
 
+/* BSCR5 exists on MPC86xADS and Duet ADS only */
+
+#define CFG_PHYDEV_ADDR		(BCSR_ADDR + 0x20000)
+
+#define BCSR5			(CFG_PHYDEV_ADDR + 0x300)
+
+#define BCSR5_MII2_EN		0x40
+#define BCSR5_MII2_RST		0x20
+#define BCSR5_T1_RST		0x10
+#define BCSR5_ATM155_RST	0x08
+#define BCSR5_ATM25_RST		0x04
+#define BCSR5_MII1_EN		0x02
+#define BCSR5_MII1_RST		0x01
+
 /* We don't use the 8259.
 */
 #define NR_8259_INTS	0
@@ -419,10 +446,6 @@
  * PCMCIA stuff
  *-----------------------------------------------------------------------
  */
-#if !defined(CONFIG_MPC823) && !defined(CONFIG_MPC850)
-#define PCMCIA_SLOT_A 1
-#endif
-
 #define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
 #define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
 #define CFG_PCMCIA_DMA_ADDR	(0xE4000000)

cpu/mpc8xx/fec.c

@@ -388,7 +388,7 @@ static void fec_pin_init(int fecidx)
 	fecp->fec_mii_speed <<= 1;
 #endif
 
-#if defined(CONFIG_DUET) && defined(WANT_MII)
+#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
 	/* use MDC for MII */
 	immr->im_ioport.iop_pdpar |=  0x0080;
 	immr->im_ioport.iop_pddir &= ~0x0080;
@@ -397,7 +397,7 @@ static void fec_pin_init(int fecidx)
 	if (fecidx == 0) {
 #if defined(CONFIG_ETHER_ON_FEC1)
 
-#if defined(CONFIG_DUET)	/* MPC87x/88x have got 2 FECs and different pinout */
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
 
 #if !defined(CONFIG_RMII)
 
@@ -489,7 +489,7 @@ static void fec_pin_init(int fecidx)
 
 #if defined(CONFIG_ETHER_ON_FEC2)
 
-#if defined(CONFIG_DUET)	/* MPC87x/88x have got 2 FECs and different pinout */
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
 
 #if !defined(CONFIG_RMII)
 
@@ -516,7 +516,7 @@ static void fec_pin_init(int fecidx)
 		immr->im_cpm.cp_cptr      &= ~0x00000028;
 #endif /* CONFIG_RMII */
 
-#endif /* CONFIG_DUET */
+#endif /* CONFIG_MPC885_FAMILY */
 
 #endif /* CONFIG_ETHER_ON_FEC2 */
 
@@ -533,7 +533,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 
 	if (efis->ether_index == 0) {
 #if defined(CONFIG_FADS)	/* FADS family uses FPGA (BCSR) to control PHYs */
-#if defined(CONFIG_DUET_ADS)
+#if defined(CONFIG_MPC885ADS)
 		*(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
 #else
 		/* configure FADS for fast (FEC) ethernet, half-duplex */
@@ -553,7 +553,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 			*bcsr4 |= BCSR4_FETHRST;
 			udelay (10);
 		}
-#endif /* CONFIG_DUET_ADS */
+#endif /* CONFIG_MPC885ADS */
 #endif /* CONFIG_FADS */
 	}
 
@@ -948,7 +948,7 @@ void mii_init (void)
 	 */
 	fecp->fec_ievent = 0xffc0;
 
-		/* Setup the pin configuration of the FEC(s)
+	/* Setup the pin configuration of the FEC(s)
 	*/
 		fec_pin_init(ether_fcc_info[i].ether_index);
 

cpu/mpc8xx/speed.c

@@ -90,7 +90,7 @@ unsigned long measure_gclk(void)
 	ulong timer2_val;
 	ulong msr_val;
 
-#ifdef CONFIG_MPC866_et_al
+#ifdef CFG_8XX_XIN
 	/* dont use OSCM, only use EXTCLK/512 */
 	immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
 #else
@@ -162,7 +162,7 @@ unsigned long measure_gclk(void)
 	timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
 	immr->im_sit.sit_piscr &= ~PISCR_PTE;
 
-#if defined(CONFIG_MPC866_et_al)
+#if defined(CFG_8XX_XIN)
 	/* not using OSCM, using XIN, so scale appropriately */
 	return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
 #else
@@ -183,22 +183,39 @@ int get_clocks (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-	volatile immap_t *immr = (immap_t *) CFG_IMMR;
-#ifndef	CONFIG_8xx_GCLK_FREQ
-	gd->cpu_clk = measure_gclk();
-#else /* CONFIG_8xx_GCLK_FREQ */
+	uint immr = get_immr (0);	/* Return full IMMR contents */
+	volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+	uint sccr = immap->im_clkrst.car_sccr;
 	/*
 	 * If for some reason measuring the gclk frequency won't
 	 * work, we return the hardwired value.
 	 * (For example, the cogent CMA286-60 CPU module has no
 	 * separate oscillator for PITRTCLK)
 	 */
-
+#if defined(CONFIG_8xx_GCLK_FREQ)
 	gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-
+#elif defined(CONFIG_8xx_OSCLK)
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+	uint pll = immap->im_clkrst.car_plprcr;
+	uint clk;
+
+	if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+		clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
+		       (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
+			(1<<PLPRCR_val(S));
+	} else {
+		clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
+	}
+	if (pll & PLPRCR_CSRC) {	/* Low frequency division factor is used  */
+		gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
+	} else {			/* High frequency division factor is used */
+		gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
+	}
+#else
+	gd->cpu_clk = measure_gclk();
 #endif /* CONFIG_8xx_GCLK_FREQ */
 
-	if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
+	if ((sccr & SCCR_EBDF11) == 0) {
 		/* No Bus Divider active */
 		gd->bus_clk = gd->cpu_clk;
 	} else {
@@ -209,7 +226,7 @@ int get_clocks (void)
 	return (0);
 }
 
-#else /* CONFIG_MPC866_et_al */
+#else /* CONFIG_MPC866_FAMILY */
 
 static long init_pll_866 (long clk);
 
@@ -345,7 +362,7 @@ static long init_pll_866 (long clk)
 	return (n);
 }
 
-#endif /* CONFIG_MPC866_et_al */
+#endif /* CONFIG_MPC866_FAMILY */
 
 #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
 /*

include/asm-ppc/8xx_immap.h

@@ -475,7 +475,7 @@ typedef struct comm_proc {
 #define lcd_cmap	fl_un.fl_un_cmap
 	char	res18[0xE00];
 
-	/* The DUET family has a second FEC here */
+	/* The MPC885 family has a second FEC here */
 	fec_t	cp_fec2;
 #define cp_fec1	cp_fec	/* consistency macro */
 

include/common.h

@@ -48,17 +48,17 @@ typedef volatile unsigned char	vu_char;
     defined(CONFIG_MPC859DSL)	|| \
     defined(CONFIG_MPC866)	|| defined(CONFIG_MPC866T)	|| \
     defined(CONFIG_MPC866P)
-# define CONFIG_MPC866_et_al 1
+# define CONFIG_MPC866_FAMILY 1
 #elif defined(CONFIG_MPC870) \
    || defined(CONFIG_MPC875) \
    || defined(CONFIG_MPC880) \
    || defined(CONFIG_MPC885)
-# define CONFIG_DUET   1
+# define CONFIG_MPC885_FAMILY   1
 #endif
 #if   defined(CONFIG_MPC860)	   \
    || defined(CONFIG_MPC860T)	   \
-   || defined(CONFIG_MPC866_et_al) \
-   || defined(CONFIG_DUET)
+   || defined(CONFIG_MPC866_FAMILY) \
+   || defined(CONFIG_MPC885_FAMILY)
 # define CONFIG_MPC86x 1
 #endif
 #elif defined(CONFIG_5xx)

include/commproc.h

@@ -743,7 +743,8 @@ typedef struct scc_enet {
 #endif	/* CONFIG_SCC1_ETHERNET */
 
 /*
- * This ENET stuff is for the MPC860TFADS/MPC86xADS/DUET with ethernet on FEC.
+ * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS
+ * with ethernet on FEC.
  */
 
 #ifdef CONFIG_FEC_ENET

include/configs/ADS860.h

@@ -26,15 +26,17 @@
 
 #define CONFIG_BAUDRATE		38400	/* Console baudrate */
 
-/* CFG_8XX_FACT * CFG_8XX_XIN = 50 MHz */
 #if 0
-#define CFG_8XX_XIN		32768	/* 32.768 kHz input frequency	*/
-#define CFG_8XX_FACT		0x5F6	/* Multiply by 1526 */
+#define CFG_8XX_FACT		1526	/* 32.768 kHz crystal on XTAL/EXTAL */
 #else
-#define CFG_8XX_XIN		4000000	/* 4 MHz input frequency	*/
-#define CFG_8XX_FACT		12	/* Multiply by 12 */
+#define CFG_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
 #endif
 
+#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+#define CONFIG_DRAM_50MHZ		1
+
 #define CONFIG_COMMANDS (CONFIG_CMD_DFL   \
 			 | CFG_CMD_DHCP   \
 			 | CFG_CMD_IMMAP  \
@@ -42,13 +44,9 @@
 			 | CFG_CMD_PING   \
 			)
 
-#define CONFIG_DRAM_50MHZ		1
 
 #include "fads.h"
 
-#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
-		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
 #define CFG_PC_IDE_RESET	((ushort)0x0008)    /* PC 12	*/
 
 #endif	/* __CONFIG_H */

include/configs/FADS860T.h

@@ -27,21 +27,19 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 
 #if 0 /* old FADS */
-# define CFG_8XX_FACT		12		/* Multiply by 12 */
-# define CFG_8XX_XIN		4000000		/* 4 MHz in	*/
+# define CFG_8XX_FACT		12	/* 4 MHz oscillator on EXTCLK */
 #else /* new FADS */
-# define CFG_8XX_FACT		10		/* Multiply by 10 */
-# define CFG_8XX_XIN		5000000		/* 5 MHz in	*/
+# define CFG_8XX_FACT		10	/* 5 MHz oscillator on EXTCLK */
 #endif
 
+#define CFG_PLPRCR  (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
+		PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
 #define CONFIG_DRAM_50MHZ		1
 #define CONFIG_SDRAM_50MHZ              1
 
 #include "fads.h"
 
-#define CFG_PLPRCR	(((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
-			 PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
 #ifdef USE_REAL_FLASH_VALUES
 /*
  * These values fit our FADS860T ...
@@ -53,6 +51,6 @@
 #define CFG_BR0_PRELIM	0x02800001  /* Real values for the board */
 #endif
 
-#define CFG_DAUGHTERBOARD /* FADS has processor-specfic daughterboard */
+#define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */
 
 #endif	/* __CONFIG_H */

include/configs/MPC86xADS.h

@@ -33,19 +33,14 @@
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		38400
 
-# define CFG_8XX_FACT		5		/* Multiply by 5	*/
-# define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
+#define CONFIG_8xx_OSCLK	10000000 /* 10MHz oscillator on EXTCLK  */
 
 #define CONFIG_DRAM_50MHZ       1
 #define CONFIG_SDRAM_50MHZ      1
 
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		14-22
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control
- */
-#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
-
 #include "fads.h"
 
+#define CFG_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
+#define CFG_BR5_PRELIM		(CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
+
 #endif	/* __CONFIG_H */

include/configs/DUET_ADS.h → include/configs/MPC885ADS.h

@@ -11,7 +11,7 @@
 #define __CONFIG_H
 
 /* Board type */
-#define CONFIG_DUET_ADS	        1	/* Duet (MPC87x/88x) ADS */
+#define CONFIG_MPC885ADS	        1	/* Duet (MPC87x/88x) ADS */
 #define CONFIG_FADS		1	/* We are FADS compatible (more or less) */
 
 #define CONFIG_MPC885 		1	/* MPC885 CPU (Duet family) */
@@ -21,33 +21,25 @@
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		38400
 
-#define CFG_8XX_FACT		5		/* Multiply by 5	*/
-#define CFG_8XX_XIN		10000000	/* 10 MHz in	*/
+#define CONFIG_8xx_OSCLK	10000000 /* 10 MHz oscillator on EXTCLK  */
+
+#define CFG_PLPRCR		((1 << PLPRCR_MFD_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
 
 #define CONFIG_SDRAM_50MHZ      1
 
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		14-22
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control
- */
-#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
+#define CONFIG_COMMANDS	(CONFIG_CMD_DFL   \
+			 | CFG_CMD_DHCP   \
+			 | CFG_CMD_IMMAP  \
+			 | CFG_CMD_MII    \
+			 | CFG_CMD_PING   \
+			)
 
 #include "fads.h"
 
-#define CFG_PHYDEV_ADDR		(BCSR_ADDR + 0x20000)
+#undef CFG_SCCR
+#define CFG_SCCR	(SCCR_TBS|SCCR_EBDF11)
 
 #define CFG_OR5_PRELIM		0xFFFF8110	/* 64Kbyte address space */
 #define CFG_BR5_PRELIM		(CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
 
-#define BCSR5			(CFG_PHYDEV_ADDR + 0x300)
-
-#define BCSR5_MII2_EN		0x40
-#define BCSR5_MII2_RST		0x20
-#define BCSR5_T1_RST		0x10
-#define BCSR5_ATM155_RST	0x08
-#define BCSR5_ATM25_RST		0x04
-#define BCSR5_MII1_EN		0x02
-#define BCSR5_MII1_RST		0x01
-
 #endif	/* __CONFIG_H */