浏览代码

Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

* 'master' of git://git.denx.de/u-boot-ppc4xx:
  ppc4xx: Change DDR2 CL from 4 to 5 for intip
  ppc4xx: Improve lm63 pwm on dlvision-10g
  ppc4xx: Do not stop booting on any keypress on intip
Wolfgang Denk 13 年之前
父节点
当前提交
0dd78fb943
共有 2 个文件被更改,包括 13 次插入9 次删除
  1. 3 3
      include/configs/dlvision-10g.h
  2. 10 6
      include/configs/intip.h

+ 3 - 3
include/configs/dlvision-10g.h

@@ -34,7 +34,7 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		dlvsion-10g
-#define CONFIG_IDENT_STRING	" dlvision-10g 0.01"
+#define CONFIG_IDENT_STRING	" dlvision-10g 0.02"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f */
@@ -117,8 +117,8 @@
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
 #define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e }	/* Sensor addresses	*/
 #define CONFIG_DTT_PWM_LOOKUPTABLE	\
-		{ { 40, 10 }, { 43, 13 }, { 46, 16 },  \
-		  { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } }
+		{ { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\
+		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
 /* EBC peripherals */

+ 10 - 6
include/configs/intip.h

@@ -37,10 +37,10 @@
 #define CONFIG_460EX		1	/* Specific PPC460EX		*/
 #ifdef CONFIG_DEVCONCENTER
 #define CONFIG_HOSTNAME		devconcenter
-#define CONFIG_IDENT_STRING	" devconcenter 0.02"
+#define CONFIG_IDENT_STRING	" devconcenter 0.05"
 #else
 #define CONFIG_HOSTNAME		intip
-#define CONFIG_IDENT_STRING	" intip 0.02"
+#define CONFIG_IDENT_STRING	" intip 0.05"
 #endif
 #define CONFIG_440		1
 #define CONFIG_4xx		1	/* ... PPC4xx family */
@@ -63,6 +63,10 @@
 #define CONFIG_FIT
 #define CFG_ALT_MEMTEST
 
+#undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -196,13 +200,13 @@
 #define CONFIG_SYS_SDRAM0_INITPLR2	0x81020000
 #define CONFIG_SYS_SDRAM0_INITPLR3	0x81030000
 #define CONFIG_SYS_SDRAM0_INITPLR4	0x81010002
-#define CONFIG_SYS_SDRAM0_INITPLR5	0xE4000542
+#define CONFIG_SYS_SDRAM0_INITPLR5	0xE4000552
 #define CONFIG_SYS_SDRAM0_INITPLR6	0x81900400
 #define CONFIG_SYS_SDRAM0_INITPLR7	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR8	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR9	0x8A880000
 #define CONFIG_SYS_SDRAM0_INITPLR10	0x8A880000
-#define CONFIG_SYS_SDRAM0_INITPLR11	0x81000442
+#define CONFIG_SYS_SDRAM0_INITPLR11	0x81000452
 #define CONFIG_SYS_SDRAM0_INITPLR12	0x81010382
 #define CONFIG_SYS_SDRAM0_INITPLR13	0x81010002
 #define CONFIG_SYS_SDRAM0_INITPLR14	0x00000000
@@ -212,11 +216,11 @@
 #define CONFIG_SYS_SDRAM0_RDCC		0x40000000
 #define CONFIG_SYS_SDRAM0_DLCR		0x00000000
 #define CONFIG_SYS_SDRAM0_CLKTR		0x40000000
-#define CONFIG_SYS_SDRAM0_WRDTR		0x84000823
+#define CONFIG_SYS_SDRAM0_WRDTR		0x86000823
 #define CONFIG_SYS_SDRAM0_SDTR1		0x80201000
 #define CONFIG_SYS_SDRAM0_SDTR2		0x32204232
 #define CONFIG_SYS_SDRAM0_SDTR3		0x090C0D15
-#define CONFIG_SYS_SDRAM0_MMODE		0x00000442
+#define CONFIG_SYS_SDRAM0_MMODE		0x00000452
 #define CONFIG_SYS_SDRAM0_MEMODE	0x00000002
 
 #define CONFIG_SYS_MBYTES_SDRAM	256	/* 256MB */