Merge branch 'master' of git://git.denx.de/u-boot-imx

Conflicts:
	board/logicpd/imx31_litekit/config.mk
	boards.cfg

Signed-off-by: Wolfgang Denk <wd@denx.de>

arch/arm/cpu/armv7/mx51/clock.c → arch/arm/cpu/armv7/mx5/clock.c

@@ -71,7 +71,7 @@ u32 get_mcu_main_clk(void)
 
 	reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >>
 		MXC_CCM_CACRR_ARM_PODF_OFFSET;
-	freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
+	freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
 	return freq / (reg + 1);
 }
 
@@ -84,14 +84,14 @@ static u32 get_periph_clk(void)
 
 	reg = __raw_readl(&mxc_ccm->cbcdr);
 	if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL))
-		return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ);
+		return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
 	reg = __raw_readl(&mxc_ccm->cbcmr);
 	switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >>
 		MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) {
 	case 0:
-		return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
+		return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
 	case 1:
-		return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ);
+		return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
 	default:
 		return 0;
 	}
@@ -146,15 +146,15 @@ static u32 get_uart_clk(void)
 		MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) {
 	case 0x0:
 		freq = decode_pll(mxc_plls[PLL1_CLOCK],
-				    CONFIG_MX51_HCLK_FREQ);
+				    CONFIG_SYS_MX5_HCLK);
 		break;
 	case 0x1:
 		freq = decode_pll(mxc_plls[PLL2_CLOCK],
-				    CONFIG_MX51_HCLK_FREQ);
+				    CONFIG_SYS_MX5_HCLK);
 		break;
 	case 0x2:
 		freq = decode_pll(mxc_plls[PLL3_CLOCK],
-				    CONFIG_MX51_HCLK_FREQ);
+				    CONFIG_SYS_MX5_HCLK);
 		break;
 	default:
 		return 66500000;
@@ -181,7 +181,7 @@ u32 get_lp_apm(void)
 	u32 ccsr = __raw_readl(&mxc_ccm->ccsr);
 
 	if (((ccsr >> 9) & 1) == 0)
-		ret_val = CONFIG_MX51_HCLK_FREQ;
+		ret_val = CONFIG_SYS_MX5_HCLK;
 	else
 		ret_val = ((32768 * 1024));
 
@@ -207,17 +207,17 @@ u32 imx_get_cspiclk(void)
 	switch (clk_sel) {
 	case 0:
 		ret_val = decode_pll(mxc_plls[PLL1_CLOCK],
-					CONFIG_MX51_HCLK_FREQ) /
+					CONFIG_SYS_MX5_HCLK) /
 					((pre_pdf + 1) * (pdf + 1));
 		break;
 	case 1:
 		ret_val = decode_pll(mxc_plls[PLL2_CLOCK],
-					CONFIG_MX51_HCLK_FREQ) /
+					CONFIG_SYS_MX5_HCLK) /
 					((pre_pdf + 1) * (pdf + 1));
 		break;
 	case 2:
 		ret_val = decode_pll(mxc_plls[PLL3_CLOCK],
-					CONFIG_MX51_HCLK_FREQ) /
+					CONFIG_SYS_MX5_HCLK) /
 					((pre_pdf + 1) * (pdf + 1));
 		break;
 	default:
@@ -248,7 +248,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
 		return imx_get_cspiclk();
 	case MXC_FEC_CLK:
 		return decode_pll(mxc_plls[PLL1_CLOCK],
-				    CONFIG_MX51_HCLK_FREQ);
+				    CONFIG_SYS_MX5_HCLK);
 	default:
 		break;
 	}
@@ -269,16 +269,16 @@ u32 imx_get_fecclk(void)
 /*
  * Dump some core clockes.
  */
-int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	u32 freq;
 
-	freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_MX51_HCLK_FREQ);
-	printf("mx51 pll1: %dMHz\n", freq / 1000000);
-	freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_MX51_HCLK_FREQ);
-	printf("mx51 pll2: %dMHz\n", freq / 1000000);
-	freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_MX51_HCLK_FREQ);
-	printf("mx51 pll3: %dMHz\n", freq / 1000000);
+	freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
+	printf("pll1: %dMHz\n", freq / 1000000);
+	freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
+	printf("pll2: %dMHz\n", freq / 1000000);
+	freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
+	printf("pll3: %dMHz\n", freq / 1000000);
 	printf("ipg clock     : %dHz\n", mxc_get_clock(MXC_IPG_CLK));
 	printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK));
 
@@ -288,7 +288,7 @@ int do_mx51_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
 /***************************************************/
 
 U_BOOT_CMD(
-	clockinfo,	CONFIG_SYS_MAXARGS,	1,	do_mx51_showclocks,
-	"display mx51 clocks\n",
+	clockinfo,	CONFIG_SYS_MAXARGS,	1,	do_mx5_showclocks,
+	"display clocks\n",
 	""
 );

arch/arm/cpu/armv7/mx51/iomux.c → arch/arm/cpu/armv7/mx5/iomux.c

@@ -23,7 +23,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/sys_proto.h>
 

arch/arm/cpu/armv7/mx51/lowlevel_init.S → arch/arm/cpu/armv7/mx5/lowlevel_init.S

@@ -257,20 +257,6 @@ lowlevel_init:
 	orr r1, r1, #(1 << 23)
 	str r1, [r0, #0x4]
 
-#ifdef ENABLE_IMPRECISE_ABORT
-	mrs r1, spsr		/* save old spsr */
-	mrs r0, cpsr		/* read out the cpsr */
-	bic r0, r0, #0x100	/* clear the A bit */
-	msr spsr, r0		/* update spsr */
-	add lr, pc, #0x8	/* update lr */
-	movs pc, lr		/* update cpsr */
-	nop
-	nop
-	nop
-	nop
-	msr spsr, r1		/* restore old spsr */
-#endif
-
 	init_l2cc
 
 	init_aips

arch/arm/cpu/armv7/mx51/soc.c → arch/arm/cpu/armv7/mx5/soc.c

@@ -33,28 +33,33 @@
 #include <fsl_esdhc.h>
 #endif
 
+#if defined(CONFIG_MX51)
+#define CPU_TYPE 0x51000
+#else
+#error "CPU_TYPE not defined"
+#endif
+
 u32 get_cpu_rev(void)
 {
-	int reg;
-	int system_rev;
+	int system_rev = CPU_TYPE;
+	int reg = __raw_readl(ROM_SI_REV);
 
-	reg = __raw_readl(ROM_SI_REV);
 	switch (reg) {
 	case 0x02:
-		system_rev = 0x51000 | CHIP_REV_1_1;
+		system_rev |= CHIP_REV_1_1;
 		break;
 	case 0x10:
 		if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
-			system_rev = 0x51000 | CHIP_REV_2_5;
+			system_rev |= CHIP_REV_2_5;
 		else
-			system_rev = 0x51000 | CHIP_REV_2_0;
+			system_rev |= CHIP_REV_2_0;
 		break;
 	case 0x20:
-		system_rev = 0x51000 | CHIP_REV_3_0;
+		system_rev |= CHIP_REV_3_0;
 		break;
 	return system_rev;
 	default:
-		system_rev = 0x51000 | CHIP_REV_1_0;
+		system_rev |= CHIP_REV_1_0;
 		break;
 	}
 	return system_rev;
@@ -67,9 +72,10 @@ int print_cpuinfo(void)
 	u32 cpurev;
 
 	cpurev = get_cpu_rev();
-	printf("CPU:   Freescale i.MX51 family rev%d.%d at %d MHz\n",
-		(cpurev & 0xF0) >> 4,
-		(cpurev & 0x0F) >> 4,
+	printf("CPU:   Freescale i.MX%x family rev%d.%d at %d MHz\n",
+		(cpurev & 0xFF000) >> 12,
+		(cpurev & 0x000F0) >> 4,
+		(cpurev & 0x0000F) >> 0,
 		mxc_get_clock(MXC_ARM_CLK) / 1000000);
 	return 0;
 }

arch/arm/cpu/armv7/mx51/timer.c → arch/arm/cpu/armv7/mx5/timer.c

@@ -75,18 +75,18 @@ void reset_timer(void)
 void reset_timer_masked(void)
 {
 	ulong val = __raw_readl(&cur_gpt->counter);
-	lastinc = val / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ);
+	lastinc = val / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
 	timestamp = 0;
 }
 
 ulong get_timer_masked(void)
 {
 	ulong val = __raw_readl(&cur_gpt->counter);
-	val /= (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ);
+	val /= (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ);
 	if (val >= lastinc)
 		timestamp += (val - lastinc);
 	else
-		timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 / CONFIG_SYS_HZ))
+		timestamp += ((0xFFFFFFFF / (CONFIG_SYS_MX5_CLK32 / CONFIG_SYS_HZ))
 				- lastinc) + val;
 	lastinc = val;
 	return timestamp;
@@ -106,7 +106,7 @@ void set_timer(ulong t)
 void __udelay(unsigned long usec)
 {
 	unsigned long now, start, tmo;
-	tmo = usec * (CONFIG_MX51_CLK32 / 1000) / 1000;
+	tmo = usec * (CONFIG_SYS_MX5_CLK32 / 1000) / 1000;
 
 	if (!tmo)
 		tmo = 1;

arch/arm/include/asm/arch-mx51/iomux.h → arch/arm/include/asm/arch-mx5/iomux.h

@@ -20,13 +20,13 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __MACH_MX51_IOMUX_H__
-#define __MACH_MX51_IOMUX_H__
+#ifndef __MACH_MX5_IOMUX_H__
+#define __MACH_MX5_IOMUX_H__
 
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
 
 typedef unsigned int iomux_pin_name_t;
 
@@ -190,4 +190,4 @@ void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config);
 unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin);
 void mxc_iomux_set_input(iomux_input_select_t input, u32 config);
 
-#endif				/*  __MACH_MX51_IOMUX_H__ */
+#endif				/*  __MACH_MX5_IOMUX_H__ */

arch/arm/include/asm/arch-mx51/mx51_pins.h → arch/arm/include/asm/arch-mx5/mx5x_pins.h

@@ -20,8 +20,8 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __ASM_ARCH_MXC_MX51_PINS_H__
-#define __ASM_ARCH_MXC_MX51_PINS_H__
+#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__
+#define __ASM_ARCH_MX5_MX5X_PINS_H__
 
 #ifndef __ASSEMBLY__
 
@@ -415,4 +415,4 @@ enum iomux_pins {
 };
 
 #endif				/* __ASSEMBLY__ */
-#endif				/* __ASM_ARCH_MXC_MX51_PINS_H__ */
+#endif				/* __ASM_ARCH_MX5_MX5X_PINS_H__ */

board/freescale/mx51evk/mx51evk.c

@@ -23,7 +23,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
 #include <asm/arch/iomux.h>
 #include <asm/errno.h>
 #include <asm/arch/sys_proto.h>

board/logicpd/imx31_litekit/config.mk

@@ -1 +1 @@
-CONFIG_SYS_TEXT_BASE = 0x87f00000
+CONFIG_SYS_TEXT_BASE = 0xa0000000

board/logicpd/imx31_litekit/imx31_litekit.c

@@ -31,12 +31,18 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init (void)
 {
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	gd->ram_size = PHYS_SDRAM_1_SIZE;
 
 	return 0;
 }
 
+void
+dram_init_banksize (void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
 int board_init (void)
 {
 	__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */

board/ttcontrol/vision2/vision2.c

@@ -26,7 +26,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx51_pins.h>
+#include <asm/arch/mx5x_pins.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
 #include <mxc_gpio.h>

boards.cfg

@@ -46,8 +46,8 @@ pm9263		arm	arm926ejs	-		ronetix		at91
 suen3		arm	arm926ejs	km_arm		keymile		kirkwood
 rd6281a		arm	arm926ejs	-		Marvell		kirkwood
 jadecpu		arm	arm926ejs	jadecpu		syteco		mb86r0x
-mx51evk		arm	armv7		mx51evk		freescale	mx51
-vision2		arm	armv7		vision2		ttcontrol	mx51
+mx51evk		arm	armv7		mx51evk		freescale	mx5
+vision2		arm	armv7		vision2		ttcontrol	mx5
 actux1		arm	ixp
 actux2		arm	ixp
 actux3		arm	ixp

drivers/usb/host/ehci-mxc.c

@@ -117,6 +117,8 @@ int ehci_hcd_init(void)
 
 	mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
 
+	udelay(10000);
+
 	return 0;
 }
 

include/configs/imx31_litekit.h

@@ -147,6 +147,13 @@
 #define PHYS_SDRAM_1		CSD0_BASE
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
 
+#undef CONFIG_SYS_ARM_WITHOUT_RELOC
+#define CONFIG_SYS_SDRAM_BASE		CSD0_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_END		IRAM_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
+
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */

include/configs/mx51evk.h

@@ -30,8 +30,8 @@
 #define CONFIG_MX51	/* in a mx51 */
 #define CONFIG_SKIP_RELOCATE_UBOOT
 
-#define CONFIG_MX51_HCLK_FREQ		24000000	/* RedBoot says 26MHz */
-#define CONFIG_MX51_CLK32		32768
+#define CONFIG_SYS_MX5_HCLK	24000000
+#define CONFIG_SYS_MX5_CLK32		32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 

include/configs/qong.h

@@ -102,6 +102,7 @@
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
 #define CONFIG_SUPPORT_VFAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
 #endif /* CONFIG_CMD_USB */
 
@@ -124,25 +125,16 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_SPI
-#define CONFIG_CMD_DATE
-#define BOARD_LATE_INIT
 
-/*
- * You can compile in a MAC address and your custom net settings by using
- * the following syntax.
- *
- * #define CONFIG_ETHADDR		xx:xx:xx:xx:xx:xx
- * #define CONFIG_SERVERIP		<server ip>
- * #define CONFIG_IPADDR		<board ip>
- * #define CONFIG_GATEWAYIP		<gateway ip>
- * #define CONFIG_NETMASK		<your netmask>
- */
+#define BOARD_LATE_INIT
 
 #define CONFIG_BOOTDELAY	5
 
@@ -164,7 +156,7 @@
 	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addmisc=setenv bootargs ${bootargs}\0"				\
 	"uboot_addr=A0000000\0"						\
-	"kernel_addr=A00A0000\0"					\
+	"kernel_addr=A00C0000\0"					\
 	"ramdisk_addr=A0300000\0"					\
 	"u-boot=qong/u-boot.bin\0"					\
 	"kernel_addr_r=80800000\0"					\
@@ -296,10 +288,14 @@ extern int qong_nand_rdy(void *chip);
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=physmap-flash.0"
+#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,"		\
+				"nand0=gen_nand"
 #define MTDPARTS_DEFAULT	\
-	"mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"	\
-	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
+	"mtdparts=physmap-flash.0:"				\
+			"512k(U-Boot),128k(env1),128k(env2),"	\
+			"2304k(kernel),13m(ramdisk),-(user);"	\
+		"gen_nand:"					\
+			"128m(nand)"
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000

include/configs/vision2.h

@@ -29,8 +29,8 @@
 #define CONFIG_MX51	/* in a mx51 */
 #define CONFIG_L2_OFF
 
-#define CONFIG_MX51_HCLK_FREQ		24000000
-#define CONFIG_MX51_CLK32		32768
+#define CONFIG_SYS_MX5_HCLK	24000000
+#define CONFIG_SYS_MX5_CLK32		32768
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO