[PATCH] TQM8272: dont change the bits given from the HRCW

                 for the SIUMCR and BCR Register.
                 Fix the calculation for the EEprom Size

Signed-off-by: Heiko Schocher <hs@denx.de>

board/tqm8272/tqm8272.c

@@ -768,7 +768,7 @@ int analyse_hwib (void)
 	p +=1;
 	p +=1;	/* connector */
 	if (*p != '0') {
-		hw->eeprom = 0x100 << (*p - 'A');
+		hw->eeprom = 0x1000 << (*p - 'A');
 	}
 	p++;
 

cpu/mpc8260/cpu_init.c

@@ -129,9 +129,9 @@ void cpu_init_f (volatile immap_t * immr)
 	/* BCR - Bus Configuration Register (4-25) */
 #if defined(CFG_BCR_60x) && (CFG_BCR_SINGLE)
 	if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
-		immr->im_siu_conf.sc_bcr = CFG_BCR_60x;
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_60x, 0x80000010);
 	} else {
-		immr->im_siu_conf.sc_bcr = CFG_BCR_SINGLE;
+		immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_SINGLE, 0x80000010);
 	}
 #else
 	immr->im_siu_conf.sc_bcr = CFG_BCR;
@@ -141,9 +141,9 @@ void cpu_init_f (volatile immap_t * immr)
 #if defined(CFG_SIUMCR_LOW) && (CFG_SIUMCR_HIGH)
 	cpu_clk = board_get_cpu_clk_f ();
 	if (cpu_clk >= 100000000) {
-		immr->im_siu_conf.sc_siumcr = CFG_SIUMCR_HIGH;
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_HIGH, 0x9f3cc000);
 	} else {
-		immr->im_siu_conf.sc_siumcr = CFG_SIUMCR_LOW;
+		immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_LOW, 0x9f3cc000);
 	}
 #else
 	immr->im_siu_conf.sc_siumcr = CFG_SIUMCR;

cpu/mpc8260/pci.c

@@ -275,22 +275,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
 				  | SIUMCR_BCTLC00
 				  | SIUMCR_MMR11;
 #elif defined(CONFIG_TQM8272)
-#if 0
-	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
-						~SIUMCR_LBPC11 &
-						~SIUMCR_CS10PC11 &
-						~SIUMCR_LBPC11) |
-					SIUMCR_LBPC01 |
-					SIUMCR_CS10PC01 |
-					SIUMCR_APPC10;
-#else
-#if 0
-	immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr |
-					SIUMCR_APPC10);
-#else
-	immap->im_siu_conf.sc_siumcr = 0x88000000;
-#endif
-#endif
+/* nothing to do for this Board here */
 #else
 	/*
 	 * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
@@ -304,7 +289,6 @@ void pci_mpc8250_init (struct pci_controller *hose)
 					SIUMCR_CS10PC01 |
 					SIUMCR_APPC10;
 #endif
-printf("%s siumcr: %x\n", __FUNCTION__, immap->im_siu_conf.sc_siumcr);
 
 	/* Make PCI lowest priority */
 	/* Each 4 bits is a device bus request	and the MS 4bits