drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS

Signed-off-by: Jon Loeliger <jdl@freescale.com>

drivers/bcm570x.c

@@ -6,7 +6,7 @@
 
 #include <common.h>
 
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
 	&& (!defined(CONFIG_NET_MULTI)) && defined(CONFIG_BCM570x)
 
 #ifdef CONFIG_BMW

drivers/cfb_console.c

@@ -180,10 +180,10 @@ CONFIG_VIDEO_HW_CURSOR:	     - Uses the hardware cursor capability of the
 
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
 #include <watchdog.h>
 #include <bmp_layout.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
 
 /*****************************************************************************/
 /* Cursor definition:							     */
@@ -709,7 +709,7 @@ void video_puts (const char *s)
 
 /*****************************************************************************/
 
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
 
 #define FILL_8BIT_332RGB(r,g,b)	{			\
 	*fb = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6);	\
@@ -1004,7 +1004,7 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
 
 	return (0);
 }
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
 
 /*****************************************************************************/
 

drivers/cs8900.c

@@ -43,7 +43,7 @@
 
 #ifdef CONFIG_DRIVER_CS8900
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 #undef DEBUG
 

drivers/dc2114x.c

@@ -20,7 +20,7 @@
 
 #include <common.h>
 
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
 	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_TULIP)
 
 #include <malloc.h>

drivers/e1000.c

@@ -44,7 +44,7 @@ tested on both gig copper and gig fiber boards
 
 #include "e1000.h"
 
-#if ((CONFIG_COMMANDS & CFG_CMD_NET)  || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
 	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_E1000)
 
 #define TOUT_LOOP   100000

drivers/eepro100.c

@@ -30,7 +30,7 @@
 
 #undef DEBUG
 
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
 	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_EEPRO100)
 
 	/* Ethernet chip registers.
@@ -272,7 +272,7 @@ static inline void OUTL (struct eth_device *dev, int command, u_long addr)
 	*(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
 }
 
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 static inline int INL (struct eth_device *dev, u_long addr)
 {
 	return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
@@ -386,7 +386,7 @@ static int eepro100_miiphy_write (char *devname, unsigned char addr,
 	return 0;
 }
 
-#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
+#endif
 
 /* Wait for the chip get the command.
 */
@@ -462,7 +462,7 @@ int eepro100_initialize (bd_t * bis)
 
 		eth_register (dev);
 
-#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
 		/* register mii command access routines */
 		miiphy_register(dev->name,
 				eepro100_miiphy_read, eepro100_miiphy_write);

drivers/inca-ip_sw.c

@@ -26,7 +26,7 @@
 
 #include <common.h>
 
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
 	&& defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH)
 
 #include <malloc.h>

drivers/lan91c96.c

@@ -65,7 +65,7 @@
 
 #ifdef CONFIG_DRIVER_LAN91C96
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 /*------------------------------------------------------------------------
  *

drivers/macb.c

@@ -18,8 +18,7 @@
 #include <common.h>
 
 #if defined(CONFIG_MACB) \
-	&& ((CONFIG_COMMANDS & (CFG_CMD_NET | CFG_CMD_MII)) \
-	    || (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII)))
+	&& (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII)))
 
 /*
  * The u-boot networking stack is a little weird.  It seems like the
@@ -165,7 +164,7 @@ static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
 	return MACB_BFEXT(DATA, frame);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
 
 static int macb_send(struct eth_device *netdev, volatile void *packet,
 		     int length)
@@ -494,9 +493,9 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
 	return 0;
 }
 
-#endif /* (CONFIG_COMMANDS & CFG_CMD_NET) */
+#endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_CMD_MII)
 
 int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
 {
@@ -572,6 +571,6 @@ int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
 	return 0;
 }
 
-#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+#endif
 
 #endif /* CONFIG_MACB */

drivers/mpc8xx_pcmcia.c

@@ -6,11 +6,11 @@
 
 #undef	CONFIG_PCMCIA
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 #define	CONFIG_PCMCIA
 #endif
 
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
 #define	CONFIG_PCMCIA
 #endif
 
@@ -23,7 +23,7 @@ extern int check_ide_device (int slot);
 extern int pcmcia_hardware_enable (int slot);
 extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 extern int pcmcia_hardware_disable(int slot);
 #endif
 
@@ -189,7 +189,7 @@ int pcmcia_on (void)
 	return rc;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 int pcmcia_off (void)
 {
 	int i;