include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

board/fads/fads.h

@@ -95,6 +95,16 @@
 #define CFG_DISCOVER_PHY
 #endif
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 #if !defined(FADS_COMMANDS_ALREADY_DEFINED)
 /*
  * Command line configuration.

include/configs/MPC8313ERDB.h

@@ -341,6 +341,15 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/MPC832XEMDS.h

@@ -423,6 +423,15 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/MPC8568MDS.h

@@ -384,6 +384,15 @@ extern unsigned long get_clock_freq(void);
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/acadia.h

@@ -299,6 +299,15 @@
 
 #define CONFIG_SUPPORT_VFAT
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/bf533-ezkit.h

@@ -97,6 +97,15 @@
 #define CONFIG_LOADS_ECHO	1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/bf533-stamp.h

@@ -289,6 +289,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/bf537-stamp.h

@@ -163,6 +163,15 @@
 #define CONFIG_NETCONSOLE	1
 #define CONFIG_NET_MULTI	1
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/bf561-ezkit.h

@@ -187,6 +187,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/integratorap.h

@@ -69,6 +69,15 @@
 /*#define CONFIG_NET_MULTI */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/integratorcp.h

@@ -71,6 +71,15 @@
 #define CFG_SERIAL1		0x17000000
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/katmai.h

@@ -211,6 +211,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/lwmon5.h

@@ -224,6 +224,15 @@
 #define CONFIG_ISO_PARTITION
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/ml401.h

@@ -145,6 +145,15 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/motionpro.h

@@ -36,6 +36,15 @@
 #define CONFIG_MOTIONPRO	1	/* ... on Promess Motion-PRO board */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/p3p440.h

@@ -169,6 +169,15 @@
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/pb1x00.h

@@ -177,6 +177,15 @@
 #define CFG_CACHELINE_SIZE	32
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/pcs440ep.h

@@ -209,6 +209,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/pdnb3.h

@@ -72,6 +72,15 @@
 #define CFG_IXP425_CONSOLE	IXP425_UART1   /* we use UART1 for console */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/pf5200.h

@@ -85,13 +85,6 @@
 #define CFG_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 #define CONFIG_NS8382X		1
 #endif
-
-#define ADD_PCI_CMD		CFG_CMD_PCI
-
-#else				/* MPC5100 */
-
-#define ADD_PCI_CMD		0	/* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -101,26 +94,35 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD		0
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_BSP
-#define CONFIG_PCI_CMD
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 
+#ifdef CONFIG_MPC5200
+#define CONFIG_CMD_PCI
+#endif
+
 
 #if (TEXT_BASE == 0xFF000000)	/* Boot low with 16 MB Flash */
 #   define CFG_LOWBOOT		1

include/configs/pleb2.h

@@ -67,6 +67,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/ppmc7xx.h

@@ -68,6 +68,15 @@
  * CMD_PCI		- PCI Bus scanning command
  */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/purple.h

@@ -82,6 +82,15 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/pxa255_idp.h

@@ -103,6 +103,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/r5200.h

@@ -67,6 +67,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/rsdproto.h

@@ -102,6 +102,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sbc2410x.h

@@ -83,6 +83,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sbc8349.h

@@ -440,6 +440,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sbc8560.h

@@ -321,6 +321,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sc3.h

@@ -168,6 +168,15 @@
 #define CONFIG_MII 1			/* add 405GP MII PHY management		*/
 #define CONFIG_PHY_ADDR 1	/* the connected Phy defaults to address 1 */
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sc520_cdp.h

@@ -66,6 +66,15 @@
 
 #define CONFIG_BAUDRATE		9600
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/sc520_spunk.h

@@ -65,6 +65,15 @@
 #define CONFIG_BAUDRATE		9600
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/scb9328.h

@@ -35,6 +35,15 @@
  */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -180,7 +189,7 @@
  * Right now there is no gain for user, but later on booting kernel might be
  * possible. Consider using XIP kernel running from flash to save RAM
  * footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
 #define CFG_JFFS2_FIRST_BANK		0
 #define CFG_JFFS2_FIRST_SECTOR		5

include/configs/sequoia.h

@@ -307,6 +307,15 @@
 #define CONFIG_ISO_PARTITION
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/shannon.h

@@ -67,6 +67,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/smdk2400.h

@@ -87,6 +87,15 @@
 #define CONFIG_RTC_S3C24X0	1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/smdk2410.h

@@ -73,6 +73,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/smmaco4.h

@@ -65,6 +65,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -338,8 +347,7 @@
 #endif
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

include/configs/sorcery.h

@@ -64,6 +64,15 @@
 #define CONFIG_PCI_CFG_SIZE	0x01000000
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/spc1920.h

@@ -81,6 +81,15 @@
 #define CONFIG_BZIP2	 /* include support for bzip2 compressed images */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -194,7 +203,7 @@
 #define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
 #define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
 
-#ifdef CFG_CMD_DATE
+#ifdef CONFIG_CMD_DATE
 # define CONFIG_RTC_DS3231
 # define CFG_I2C_RTC_ADDR      0x68
 #endif

include/configs/spieval.h

@@ -121,6 +121,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -419,8 +428,7 @@
 #endif
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

include/configs/stxgp3.h

@@ -298,6 +298,15 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/stxssa.h

@@ -326,6 +326,15 @@
 #define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/suzaku.h

@@ -56,6 +56,15 @@
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/taishan.h

@@ -235,6 +235,15 @@
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/tb0229.h

@@ -88,6 +88,15 @@
 #define CONFIG_BOOTCOMMAND	"run netboot"
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/trab.h

@@ -131,6 +131,15 @@
 #define CONFIG_RTC_S3C24X0	1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/uc101.h

@@ -51,6 +51,15 @@
 #define CONFIG_DOS_PARTITION
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -265,8 +274,7 @@
 #endif
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW
 

include/configs/utx8245.h

@@ -87,6 +87,15 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #define CONFIG_ENV_OVERWRITE
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/v38b.h

@@ -85,6 +85,15 @@
 #define CONFIG_USB_CONFIG	0x00001000
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/walnut.h

@@ -99,6 +99,15 @@
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/wepep250.h

@@ -35,6 +35,15 @@
 #define CONFIG_BAUDRATE   115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -149,7 +158,7 @@
  * Right now there is no gain for user, but later on booting kernel might be
  * possible. Consider using XIP kernel running from flash to save RAM
  * footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
 #define CFG_JFFS2_FIRST_BANK		0
 #define CFG_JFFS2_FIRST_SECTOR		5

include/configs/xaeniax.h

@@ -65,6 +65,15 @@
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/xm250.h

@@ -82,6 +82,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/xsengine.h

@@ -103,6 +103,15 @@
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_BAUDRATE			115200
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/xupv2p.h

@@ -120,6 +120,15 @@
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/yosemite.h

@@ -249,6 +249,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/yucca.h

@@ -192,6 +192,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/zylonite.h

@@ -77,6 +77,15 @@
 #define CONFIG_BAUDRATE		115200
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */