mmc: Fix version check for clock API in sdhci driver

When setting up the clocks in the sdhci driver, the "spec version"
must be masked off.  Otherwise any time the vendor version is not 0,
the check will allways assume the interface is version 3.  This breaks
when the interface is actually version 1 or 2.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

drivers/mmc/sdhci.c

@@ -260,7 +260,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
 	if (clock == 0)
 		return 0;
 
-	if (host->version >= SDHCI_SPEC_300) {
+	if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) {
 		/* Version 3.00 divisors must be a multiple of 2. */
 		if (mmc->f_max <= clock)
 			div = 1;
@@ -347,10 +347,10 @@ void sdhci_set_ios(struct mmc *mmc)
 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 	if (mmc->bus_width == 8) {
 		ctrl &= ~SDHCI_CTRL_4BITBUS;
-		if (host->version >= SDHCI_SPEC_300)
+		if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
 			ctrl |= SDHCI_CTRL_8BITBUS;
 	} else {
-		if (host->version >= SDHCI_SPEC_300)
+		if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
 			ctrl &= ~SDHCI_CTRL_8BITBUS;
 		if (mmc->bus_width == 4)
 			ctrl |= SDHCI_CTRL_4BITBUS;
@@ -421,7 +421,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	if (max_clk)
 		mmc->f_max = max_clk;
 	else {
-		if (host->version >= SDHCI_SPEC_300)
+		if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
 			mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
 				>> SDHCI_CLOCK_BASE_SHIFT;
 		else
@@ -436,7 +436,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	if (min_clk)
 		mmc->f_min = min_clk;
 	else {
-		if (host->version >= SDHCI_SPEC_300)
+		if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300)
 			mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300;
 		else
 			mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200;