Merge branch 'master' into next

board/espt/lowlevel_init.S

@@ -72,15 +72,7 @@ lowlevel_init:
 	/* set DDR-SDRAM dummy read */
 	write32 MMSEL_A, MMSEL_D
 
-	mov.l	MMSEL_A, r0
-	synco
-	mov.l	@r0, r1
-	synco
-
-	mov.l	CS0_A, r0
-	synco
-	mov.l	@r0, r1
-	synco
+	write32 MMSEL_A, CS0_A
 
 	/* set DDR-SDRAM bus/endian etc */
 	write32 MIM_U_A, MIM_U_D

board/freescale/mpc8572ds/mpc8572ds.c

@@ -199,7 +199,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie3_hose, first_free_busno, pcie_ep);
+					&pcie3_hose, first_free_busno);
 		/*
 		 * Activate ULI1575 legacy chip by performing a fake
 		 * memory access.  Needed to make ULI RTC work.
@@ -231,7 +231,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie2_hose, first_free_busno, pcie_ep);
+					&pcie2_hose, first_free_busno);
 	} else {
 		printf ("    PCIE2: disabled\n");
 	}
@@ -251,7 +251,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie1_hose, first_free_busno, pcie_ep);
+					&pcie1_hose, first_free_busno);
 	} else {
 		printf ("    PCIE1: disabled\n");
 	}

board/freescale/mpc8610hpcd/mpc8610hpcd.c

@@ -127,11 +127,6 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-	puts(" DDR: ");
-	return dram_size;
-#endif
-
 	puts(" DDR: ");
 	return dram_size;
 }

board/freescale/mpc8641hpcn/mpc8641hpcn.c

@@ -74,11 +74,6 @@ initdram(int board_type)
 	dram_size = fixed_sdram();
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-	puts("    DDR: ");
-	return dram_size;
-#endif
-
 	puts("    DDR: ");
 	return dram_size;
 }

board/freescale/p1_p2_rdb/pci.c

@@ -71,7 +71,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie2_hose, first_free_busno, pcie_ep);
+					&pcie2_hose, first_free_busno);
 	} else {
 		printf ("    PCIE2: disabled\n");
 	}
@@ -90,7 +90,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno, pcie_ep);
+					&pcie1_hose, first_free_busno);
 	} else {
 		printf ("    PCIE1: disabled\n");
 	}

board/freescale/p2020ds/p2020ds.c

@@ -227,7 +227,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie2_hose, first_free_busno, pcie_ep);
+					&pcie2_hose, first_free_busno);
 
 		/*
 		 * The workaround doesn't work on p2020 because the location
@@ -267,7 +267,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie3_hose, first_free_busno, pcie_ep);
+					&pcie3_hose, first_free_busno);
 	} else {
 		printf("    PCIE3: disabled\n");
 	}
@@ -286,7 +286,7 @@ void pci_init_board(void)
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-				&pcie1_hose, first_free_busno, pcie_ep);
+					&pcie1_hose, first_free_busno);
 	} else {
 		printf("    PCIE1: disabled\n");
 	}

board/renesas/sh7785lcr/lowlevel_init.S

@@ -178,60 +178,6 @@ lbsc_end:
 
 	.align 4
 
-/*------- LBSC -------*/
-MMSELR_A:	.long	0xfc400020
-#if defined(CONFIG_SH_32BIT)
-MMSELR_D:	.long	0xa5a50005
-#else
-MMSELR_D:	.long	0xa5a50002
-#endif
-
-/*------- DBSC2 -------*/
-#define DBSC2_BASE	0xfe800000
-DBSC2_DBSTATE_A:	.long	DBSC2_BASE + 0x0c
-DBSC2_DBEN_A:		.long	DBSC2_BASE + 0x10
-DBSC2_DBCMDCNT_A:	.long	DBSC2_BASE + 0x14
-DBSC2_DBCONF_A:		.long	DBSC2_BASE + 0x20
-DBSC2_DBTR0_A:		.long	DBSC2_BASE + 0x30
-DBSC2_DBTR1_A:		.long	DBSC2_BASE + 0x34
-DBSC2_DBTR2_A:		.long	DBSC2_BASE + 0x38
-DBSC2_DBRFCNT0_A:	.long	DBSC2_BASE + 0x40
-DBSC2_DBRFCNT1_A:	.long	DBSC2_BASE + 0x44
-DBSC2_DBRFCNT2_A:	.long	DBSC2_BASE + 0x48
-DBSC2_DBRFSTS_A:	.long	DBSC2_BASE + 0x4c
-DBSC2_DBFREQ_A:		.long	DBSC2_BASE + 0x50
-DBSC2_DBDICODTOCD_A:	.long	DBSC2_BASE + 0x54
-DBSC2_DBMRCNT_A:	.long	DBSC2_BASE + 0x60
-DDR_DUMMY_ACCESS_A:	.long	0x40000000
-
-DBSC2_DBCONF_D:		.long	0x00630002
-DBSC2_DBTR0_D:		.long	0x050b1f04
-DBSC2_DBTR1_D:		.long	0x00040204
-DBSC2_DBTR2_D:		.long	0x02100308
-DBSC2_DBFREQ_D1:	.long	0x00000000
-DBSC2_DBFREQ_D2:	.long	0x00000100
-DBSC2_DBDICODTOCD_D:	.long	0x000f0907
-
-DBSC2_DBCMDCNT_D_CKE_H:	.long	0x00000003
-DBSC2_DBCMDCNT_D_PALL:	.long	0x00000002
-DBSC2_DBCMDCNT_D_REF:	.long	0x00000004
-
-DBSC2_DBMRCNT_D_EMRS2:	.long	0x00020000
-DBSC2_DBMRCNT_D_EMRS3:	.long	0x00030000
-DBSC2_DBMRCNT_D_EMRS1_1:	.long	0x00010006
-DBSC2_DBMRCNT_D_EMRS1_2:	.long	0x00010386
-DBSC2_DBMRCNT_D_MRS_1:	.long	0x00000952
-DBSC2_DBMRCNT_D_MRS_2:	.long	0x00000852
-
-DBSC2_DBEN_D:		.long	0x00000001
-
-DBSC2_DBPDCNT0_D3:	.long	0x00000080
-DBSC2_DBRFCNT1_D:	.long	0x00000926
-DBSC2_DBRFCNT2_D:	.long	0x00fe00fe
-DBSC2_DBRFCNT0_D:	.long	0x00010000
-
-WAIT_200US:	.long	33333
-
 /*------- GPIO -------*/
 PACR_D:		.long	0x0000
 PBCR_D:		.long	0x0000
@@ -291,6 +237,59 @@ PPUPR2_A:	.long	GPIO_BASE + 0x62
 P1MSELR_A:	.long	GPIO_BASE + 0x80
 P2MSELR_A:	.long	GPIO_BASE + 0x82
 
+MMSELR_A:      .long   0xfc400020
+#if defined(CONFIG_SH_32BIT)
+MMSELR_D:      .long   0xa5a50005
+#else
+MMSELR_D:      .long   0xa5a50002
+#endif
+
+/*------- DBSC2 -------*/
+#define DBSC2_BASE	0xfe800000
+DBSC2_DBSTATE_A:	.long	DBSC2_BASE + 0x0c
+DBSC2_DBEN_A:		.long	DBSC2_BASE + 0x10
+DBSC2_DBCMDCNT_A:	.long	DBSC2_BASE + 0x14
+DBSC2_DBCONF_A:		.long	DBSC2_BASE + 0x20
+DBSC2_DBTR0_A:		.long	DBSC2_BASE + 0x30
+DBSC2_DBTR1_A:		.long	DBSC2_BASE + 0x34
+DBSC2_DBTR2_A:		.long	DBSC2_BASE + 0x38
+DBSC2_DBRFCNT0_A:	.long	DBSC2_BASE + 0x40
+DBSC2_DBRFCNT1_A:	.long	DBSC2_BASE + 0x44
+DBSC2_DBRFCNT2_A:	.long	DBSC2_BASE + 0x48
+DBSC2_DBRFSTS_A:	.long	DBSC2_BASE + 0x4c
+DBSC2_DBFREQ_A:		.long	DBSC2_BASE + 0x50
+DBSC2_DBDICODTOCD_A:.long	DBSC2_BASE + 0x54
+DBSC2_DBMRCNT_A:	.long	DBSC2_BASE + 0x60
+DDR_DUMMY_ACCESS_A:	.long	0x40000000
+
+DBSC2_DBCONF_D:		.long	0x00630002
+DBSC2_DBTR0_D:		.long	0x050b1f04
+DBSC2_DBTR1_D:		.long	0x00040204
+DBSC2_DBTR2_D:		.long	0x02100308
+DBSC2_DBFREQ_D1:	.long	0x00000000
+DBSC2_DBFREQ_D2:	.long	0x00000100
+DBSC2_DBDICODTOCD_D:.long	0x000f0907
+
+DBSC2_DBCMDCNT_D_CKE_H:	.long	0x00000003
+DBSC2_DBCMDCNT_D_PALL:	.long	0x00000002
+DBSC2_DBCMDCNT_D_REF:	.long	0x00000004
+
+DBSC2_DBMRCNT_D_EMRS2:	.long	0x00020000
+DBSC2_DBMRCNT_D_EMRS3:	.long	0x00030000
+DBSC2_DBMRCNT_D_EMRS1_1:	.long	0x00010006
+DBSC2_DBMRCNT_D_EMRS1_2:	.long	0x00010386
+DBSC2_DBMRCNT_D_MRS_1:	.long	0x00000952
+DBSC2_DBMRCNT_D_MRS_2:	.long	0x00000852
+
+DBSC2_DBEN_D:		.long	0x00000001
+
+DBSC2_DBPDCNT0_D3:	.long	0x00000080
+DBSC2_DBRFCNT1_D:	.long	0x00000926
+DBSC2_DBRFCNT2_D:	.long	0x00fe00fe
+DBSC2_DBRFCNT0_D:	.long	0x00010000
+
+WAIT_200US:    .long   33333
+
 /*------- LBSC -------*/
 PASCR_A:		.long	0xff000070
 PASCR_32BIT_MODE:	.long	0x80000000	/* check booting mode */

board/sbc8548/sbc8548.c

@@ -359,7 +359,7 @@ pci_init_board(void)
 
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pci1_hose, first_free_busno, 0);
+					&pci1_hose, first_free_busno);
 	} else {
 		printf ("    PCI: disabled\n");
 	}
@@ -378,7 +378,7 @@ pci_init_board(void)
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		printf ("    PCIE at base address %lx\n", pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
-					&pcie1_hose, first_free_busno, 0);
+					&pcie1_hose, first_free_busno);
 	} else {
 		printf ("    PCIE: disabled\n");
 	}

board/sbc8641d/sbc8641d.c

@@ -62,11 +62,6 @@ phys_size_t initdram (int board_type)
 	dram_size = fixed_sdram ();
 #endif
 
-#if defined(CONFIG_SYS_RAMBOOT)
-	puts ("    DDR: ");
-	return dram_size;
-#endif
-
 	puts ("    DDR: ");
 	return dram_size;
 }

cpu/mpc85xx/release.S

@@ -102,18 +102,22 @@ __secondary_start_page:
 #ifdef CONFIG_BACKSIDE_L2_CACHE
 	/* Enable/invalidate the L2 cache */
 	msync
-	lis	r3,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
-	ori	r3,r3,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
-	mtspr	SPRN_L2CSR0,r3
+	lis	r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
+	ori	r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
+	mtspr	SPRN_L2CSR0,r2
 1:
 	mfspr	r3,SPRN_L2CSR0
-	andis.	r1,r3,L2CSR0_L2FI@h
+	and.	r1,r3,r2
 	bne	1b
 
 	lis	r3,CONFIG_SYS_INIT_L2CSR0@h
 	ori	r3,r3,CONFIG_SYS_INIT_L2CSR0@l
 	mtspr	SPRN_L2CSR0,r3
 	isync
+2:
+	mfspr	r3,SPRN_L2CSR0
+	andis.	r1,r3,L2CSR0_L2E@h
+	beq	2b
 #endif
 
 #define EPAPR_MAGIC		(0x45504150)

cpu/mpc85xx/tlb.c

@@ -132,10 +132,10 @@ int find_tlb_idx(void *addr, u8 tlbsel)
 void init_addr_map(void)
 {
 	int i;
-	unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff;
+	unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
 
 	/* walk all the entries */
-	for (i = 0; i < max_cam; i++) {
+	for (i = 0; i < num_cam; i++) {
 		unsigned long epn;
 		u32 tsize, _mas1;
 		phys_addr_t rpn;

cpu/mpc8xxx/ddr/options.c

@@ -22,9 +22,7 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 			unsigned int ctrl_num)
 {
 	unsigned int i;
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	const char *p;
-#endif
 
 	/* Chip select options. */
 
@@ -242,8 +240,10 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 						simple_strtoul(p, NULL, 0);
 		}
 	}
+#endif
 
-	if( (p = getenv("ba_intlv_ctl")) != NULL) {
+	if( ((p = getenv("ba_intlv_ctl")) != NULL) &&
+		(CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
 		if (strcmp(p, "cs0_cs1") == 0)
 			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
 		else if (strcmp(p, "cs2_cs3") == 0)
@@ -283,7 +283,6 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
 			break;
 		}
 	}
-#endif
 
 	fsl_ddr_board_options(popts, pdimm, ctrl_num);
 

cpu/ppc4xx/44x_spd_ddr2.c

@@ -3160,7 +3160,7 @@ inline void ppc4xx_ibm_ddr2_register_dump(void)
 	PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
 	PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
 	PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
-	PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCCR);
+	PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
 #if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
      defined(CONFIG_460EX) || defined(CONFIG_460GT))
 	PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);

doc/README.drivers.eth

@@ -122,10 +122,12 @@ function can be called multiple times in a row.
 
 The recv function should process packets as long as the hardware has them
 readily available before returning.  i.e. you should drain the hardware fifo.
-The common code sets up packet buffers for you already (NetRxPackets), so there
-is no need to allocate your own.  For each packet you receive, you should call
-the NetReceive() function on it with the packet length.  So the pseudo code
-here would look something like:
+For each packet you receive, you should call the NetReceive() function on it
+along with the packet length.  The common code sets up packet buffers for you
+already in the .bss (NetRxPackets), so there should be no need to allocate your
+own.  This doesn't mean you must use the NetRxPackets array however; you're
+free to call the NetReceive() function with any buffer you wish.  So the pseudo
+code here would look something like:
 int ape_recv(struct eth_device *dev)
 {
 	int length, i = 0;
@@ -145,7 +147,8 @@ int ape_recv(struct eth_device *dev)
 }
 
 The halt function should turn off / disable the hardware and place it back in
-its reset state.
+its reset state.  It can be called at any time (before any call to the related
+init function), so make sure it can handle this sort of thing.
 
 So the call graph at this stage would look something like:
 some net operation (ping / tftp / whatever...)

drivers/net/cs8900.c

@@ -56,7 +56,7 @@
 #define REG_READ(a) readl((a))
 
 /* we don't need 16 bit initialisation on 32 bit bus */
-#define get_reg_init_bus(x) get_reg((x))
+#define get_reg_init_bus(r,d) get_reg((r),(d))
 
 #else
 
@@ -321,15 +321,16 @@ int cs8900_initialize(u8 dev_num, int base_addr)
 	memset(priv, 0, sizeof(*priv));
 	priv->regs = (struct cs8900_regs *)base_addr;
 
-	/* Load MAC address from EEPROM */
-	cs8900_get_enetaddr(dev);
-
 	dev->iobase = base_addr;
 	dev->priv = priv;
 	dev->init = cs8900_init;
 	dev->halt = cs8900_halt;
 	dev->send = cs8900_send;
 	dev->recv = cs8900_recv;
+
+	/* Load MAC address from EEPROM */
+	cs8900_get_enetaddr(dev);
+
 	sprintf(dev->name, "%s-%hu", CS8900_DRIVERNAME, dev_num);
 
 	eth_register(dev);

drivers/net/dm9000x.c

@@ -284,7 +284,6 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	int i, oft, lnk;
 	u8 io_mode;
 	struct board_info *db = &dm9000_info;
-	uchar enetaddr[6];
 
 	DM9000_DBG("%s\n", __func__);
 
@@ -342,20 +341,11 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
 	/* Clear interrupt status */
 	DM9000_iow(DM9000_ISR, ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS);
 
-	/* Set Node address */
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-#if !defined(CONFIG_DM9000_NO_SROM)
-		for (i = 0; i < 3; i++)
-			dm9000_read_srom_word(i, enetaddr + 2 * i);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-#endif
-	}
-
-	printf("MAC: %pM\n", enetaddr);
+	printf("MAC: %pM\n", dev->enetaddr);
 
 	/* fill device MAC address registers */
 	for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++)
-		DM9000_iow(oft, enetaddr[i]);
+		DM9000_iow(oft, dev->enetaddr[i]);
 	for (i = 0, oft = 0x16; i < 8; i++, oft++)
 		DM9000_iow(oft, 0xff);
 
@@ -558,6 +548,15 @@ void dm9000_write_srom_word(int offset, u16 val)
 }
 #endif
 
+static void dm9000_get_enetaddr(struct eth_device *dev)
+{
+#if !defined(CONFIG_DM9000_NO_SROM)
+	int i;
+	for (i = 0; i < 3; i++)
+		dm9000_read_srom_word(i, dev->enetaddr + (2 * i));
+#endif
+}
+
 /*
    Read a byte from I/O port
 */
@@ -621,6 +620,9 @@ int dm9000_initialize(bd_t *bis)
 {
 	struct eth_device *dev = &(dm9000_info.netdev);
 
+	/* Load MAC address from EEPROM */
+	dm9000_get_enetaddr(dev);
+
 	dev->init = dm9000_init;
 	dev->halt = dm9000_halt;
 	dev->send = dm9000_send;

drivers/net/fec_mxc.c

@@ -55,6 +55,8 @@ struct fec_priv gfec = {
 	.tbd_base  = NULL,
 	.tbd_index = 0,
 	.bd        = NULL,
+	.rdb_ptr   = NULL,
+	.base_ptr  = NULL,
 };
 
 /*
@@ -157,7 +159,9 @@ static int miiphy_restart_aneg(struct eth_device *dev)
 	/*
 	 * Set the auto-negotiation advertisement register bits
 	 */
-	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR, 0x1e0);
+	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_ANAR,
+			PHY_ANLPAR_TXFD | PHY_ANLPAR_TX | PHY_ANLPAR_10FD |
+			PHY_ANLPAR_10 | PHY_ANLPAR_PSB_802_3);
 	miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, PHY_BMCR,
 			PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
 
@@ -228,7 +232,8 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size)
 	uint32_t p = 0;
 
 	/* reserve data memory and consider alignment */
-	fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT);
+	if (fec->rdb_ptr == NULL)
+		fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT);
 	p = (uint32_t)fec->rdb_ptr;
 	if (!p) {
 		puts("fec_imx27: not enough malloc memory!\n");
@@ -341,8 +346,8 @@ static int fec_open(struct eth_device *edev)
 	writel(FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
 
 	miiphy_wait_aneg(edev);
-	miiphy_speed(edev->name, 0);
-	miiphy_duplex(edev->name, 0);
+	miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR);
+	miiphy_duplex(edev->name, CONFIG_FEC_MXC_PHYADDR);
 
 	/*
 	 * Enable SmartDMA receive task
@@ -363,8 +368,9 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
 	 * Datasheet forces the startaddress of each chain is 16 byte
 	 * aligned
 	 */
-	fec->base_ptr = malloc((2 + FEC_RBD_NUM) *
-			sizeof(struct fec_bd) + DB_ALIGNMENT);
+	if (fec->base_ptr == NULL)
+		fec->base_ptr = malloc((2 + FEC_RBD_NUM) *
+				sizeof(struct fec_bd) + DB_ALIGNMENT);
 	base = (uint32_t)fec->base_ptr;
 	if (!base) {
 		puts("fec_imx27: not enough malloc memory!\n");
@@ -491,8 +497,6 @@ static void fec_halt(struct eth_device *dev)
 	writel(0, &fec->eth->ecntrl);
 	fec->rbd_index = 0;
 	fec->tbd_index = 0;
-	free(fec->rdb_ptr);
-	free(fec->base_ptr);
 	debug("eth_halt: done\n");
 }
 

drivers/net/smc91111.h

@@ -81,10 +81,10 @@ struct smc91111_priv{
 #ifdef CONFIG_PXA250
 
 #ifdef CONFIG_XSENGINE
-#define	SMC_inl(a,r)	(*((volatile dword *)((a)->iobase+(r<<1))))
-#define	SMC_inw(a,r)	(*((volatile word *)((a)->iobase+(r<<1))))
+#define	SMC_inl(a,r)	(*((volatile dword *)((a)->iobase+((r)<<1))))
+#define	SMC_inw(a,r)	(*((volatile word *)((a)->iobase+((r)<<1))))
 #define SMC_inb(a,p)  ({ \
-	unsigned int __p = (unsigned int)((a)->iobase + (p<<1)); \
+	unsigned int __p = (unsigned int)((a)->iobase + ((p)<<1)); \
 	unsigned int __v = *(volatile unsigned short *)((__p) & ~2); \
 	if (__p & 2) __v >>= 8; \
 	else __v &= 0xff; \
@@ -99,7 +99,7 @@ struct smc91111_priv{
 	__v; })
 #define SMC_inb(a,p)	({ \
 	unsigned int ___v = SMC_inw((a),(p) & ~1); \
-	if (p & 1) ___v >>= 8; \
+	if ((p) & 1) ___v >>= 8; \
 	else ___v &= 0xff; \
 	___v; })
 #else

drivers/net/smc911x.c

@@ -243,7 +243,7 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 	dev = malloc(sizeof(*dev));
 	if (!dev) {
 		free(dev);
-		return 0;
+		return -1;
 	}
 	memset(dev, 0, sizeof(*dev));
 
@@ -271,5 +271,5 @@ int smc911x_initialize(u8 dev_num, int base_addr)
 	sprintf(dev->name, "%s-%hu", DRIVERNAME, dev_num);
 
 	eth_register(dev);
-	return 0;
+	return 1;
 }

drivers/pci/fsl_pci_init.c

@@ -42,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FSL_PCI_PBFR		0x44
 #define FSL_PCIE_CAP_ID		0x4c
 #define FSL_PCIE_CFG_RDY	0x4b0
+#define FSL_PROG_IF_AGENT	0x1
 
 void pciauto_prescan_setup_bridge(struct pci_controller *hose,
 				pci_dev_t dev, int sub_bus);
@@ -412,28 +413,24 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 	}
 }
 
+int fsl_is_pci_agent(struct pci_controller *hose)
+{
+	u8 prog_if;
+	pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
+
+	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+
+	return (prog_if == FSL_PROG_IF_AGENT);
+}
+
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
-			struct pci_controller *hose, int busno, int pcie_ep)
+			struct pci_controller *hose, int busno)
 {
 	volatile ccsr_fsl_pci_t *pci;
 	struct pci_region *r;
 
 	pci = (ccsr_fsl_pci_t *) pci_info->regs;
 
-	if (pcie_ep) {
-		volatile pit_t *pi = &pci->pit[2];
-
-		pci_setup_indirect(hose, (u32)&pci->cfg_addr,
-					 (u32)&pci->cfg_data);
-		out_be32(&pi->pitar, 0);
-		out_be32(&pi->piwbar, 0);
-		out_be32(&pi->piwar, PIWAR_EN | PIWAR_LOCAL |
-			PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_IWS_4K);
-
-		fsl_pci_config_unlock(hose);
-		return 0;
-	}
-
 	/* on non-PCIe controllers we don't have pme_msg_det so this code
 	 * should do nothing since the read will return 0
 	 */
@@ -464,6 +461,11 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 
 	fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
 
+	if (fsl_is_pci_agent(hose)) {
+		fsl_pci_config_unlock(hose);
+		hose->last_busno = hose->first_busno;
+	}
+
 	printf("    PCIE%x on bus %02x - %02x\n", pci_info->pci_num,
 			hose->first_busno, hose->last_busno);
 

examples/standalone/smc911x_eeprom.c

@@ -2,7 +2,7 @@
  * smc911x_eeprom.c - EEPROM interface to SMC911x parts.
  * Only tested on SMSC9118 though ...
  *
- * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  *
@@ -17,8 +17,12 @@
 #include <common.h>
 #include <exports.h>
 
-#ifdef CONFIG_DRIVER_SMC911X
-
+/* the smc911x.h gets base addr through eth_device' iobase */
+struct eth_device {
+	const char *name;
+	unsigned long iobase;
+	void *priv;
+};
 #include "../drivers/net/smc911x.h"
 
 /**
@@ -55,32 +59,32 @@ static void usage(void)
  * Registers 0x00 - 0x50 are FIFOs.  The 0x50+ are the control registers
  * and they're all 32bits long.  0xB8+ are reserved, so don't bother.
  */
-static void dump_regs(void)
+static void dump_regs(struct eth_device *dev)
 {
 	u8 i, j = 0;
 	for (i = 0x50; i < 0xB8; i += sizeof(u32))
 		printf("%02x: 0x%08x %c", i,
-			smc911x_reg_read(CONFIG_DRIVER_SMC911X_BASE + i),
+			smc911x_reg_read(dev, i),
 			(j++ % 2 ? '\n' : ' '));
 }
 
 /**
  *	do_eeprom_cmd - handle eeprom communication
  */
-static int do_eeprom_cmd(int cmd, u8 reg)
+static int do_eeprom_cmd(struct eth_device *dev, int cmd, u8 reg)
 {
-	if (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) {
+	if (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY) {
 		printf("eeprom_cmd: busy at start (E2P_CMD = 0x%08x)\n",
-			smc911x_reg_read(E2P_CMD));
+			smc911x_reg_read(dev, E2P_CMD));
 		return -1;
 	}
 
-	smc911x_reg_write(E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
+	smc911x_reg_write(dev, E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
 
-	while (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+	while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
 		if (smsc_ctrlc()) {
 			printf("eeprom_cmd: timeout (E2P_CMD = 0x%08x)\n",
-				smc911x_reg_read(E2P_CMD));
+				smc911x_reg_read(dev, E2P_CMD));
 			return -1;
 		}
 
@@ -90,37 +94,37 @@ static int do_eeprom_cmd(int cmd, u8 reg)
 /**
  *	read_eeprom_reg - read specified register in EEPROM
  */
-static u8 read_eeprom_reg(u8 reg)
+static u8 read_eeprom_reg(struct eth_device *dev, u8 reg)
 {
-	int ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_READ, reg);
-	return (ret ? : smc911x_reg_read(E2P_DATA));
+	int ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ, reg);
+	return (ret ? : smc911x_reg_read(dev, E2P_DATA));
 }
 
 /**
  *	write_eeprom_reg - write specified value into specified register in EEPROM
  */
-static int write_eeprom_reg(u8 value, u8 reg)
+static int write_eeprom_reg(struct eth_device *dev, u8 value, u8 reg)
 {
 	int ret;
 
 	/* enable erasing/writing */
-	ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWEN, reg);
+	ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN, reg);
 	if (ret)
 		goto done;
 
 	/* erase the eeprom reg */
-	ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_ERASE, reg);
+	ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE, reg);
 	if (ret)
 		goto done;
 
 	/* write the eeprom reg */
-	smc911x_reg_write(E2P_DATA, value);
-	ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_WRITE, reg);
+	smc911x_reg_write(dev, E2P_DATA, value);
+	ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE, reg);
 	if (ret)
 		goto done;
 
 	/* disable erasing/writing */
-	ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWDS, reg);
+	ret = do_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWDS, reg);
 
  done:
 	return ret;
@@ -139,7 +143,7 @@ static char *skip_space(char *buf)
 /**
  *	write_stuff - handle writing of MAC registers / eeprom
  */
-static void write_stuff(char *line)
+static void write_stuff(struct eth_device *dev, char *line)
 {
 	char dest;
 	char *endp;
@@ -182,39 +186,39 @@ static void write_stuff(char *line)
 	/* Finally, execute the command */
 	if (dest == 'E') {
 		printf("Writing EEPROM register %02x with %02x\n", reg, value);
-		write_eeprom_reg(value, reg);
+		write_eeprom_reg(dev, value, reg);
 	} else {
 		printf("Writing MAC register %02x with %08x\n", reg, value);
-		smc911x_reg_write(CONFIG_DRIVER_SMC911X_BASE + reg, value);
+		smc911x_reg_write(dev, reg, value);
 	}
 }
 
 /**
  *	copy_from_eeprom - copy MAC address in eeprom to address registers
  */
-static void copy_from_eeprom(void)
+static void copy_from_eeprom(struct eth_device *dev)
 {
 	ulong addrl =
-		read_eeprom_reg(0x01) |
-		read_eeprom_reg(0x02) << 8 |
-		read_eeprom_reg(0x03) << 16 |
-		read_eeprom_reg(0x04) << 24;
+		read_eeprom_reg(dev, 0x01) |
+		read_eeprom_reg(dev, 0x02) << 8 |
+		read_eeprom_reg(dev, 0x03) << 16 |
+		read_eeprom_reg(dev, 0x04) << 24;
 	ulong addrh =
-		read_eeprom_reg(0x05) |
-		read_eeprom_reg(0x06) << 8;
-	smc911x_set_mac_csr(ADDRL, addrl);
-	smc911x_set_mac_csr(ADDRH, addrh);
+		read_eeprom_reg(dev, 0x05) |
+		read_eeprom_reg(dev, 0x06) << 8;
+	smc911x_set_mac_csr(dev, ADDRL, addrl);
+	smc911x_set_mac_csr(dev, ADDRH, addrh);
 	puts("EEPROM contents copied to MAC\n");
 }
 
 /**
  *	print_macaddr - print MAC address registers and MAC address in eeprom
  */
-static void print_macaddr(void)
+static void print_macaddr(struct eth_device *dev)
 {
 	puts("Current MAC Address in MAC:     ");
-	ulong addrl = smc911x_get_mac_csr(ADDRL);
-	ulong addrh = smc911x_get_mac_csr(ADDRH);
+	ulong addrl = smc911x_get_mac_csr(dev, ADDRL);
+	ulong addrh = smc911x_get_mac_csr(dev, ADDRH);
 	printf("%02x:%02x:%02x:%02x:%02x:%02x\n",
 		(u8)(addrl), (u8)(addrl >> 8), (u8)(addrl >> 16),
 		(u8)(addrl >> 24), (u8)(addrh), (u8)(addrh >> 8));
@@ -222,41 +226,42 @@ static void print_macaddr(void)
 	puts("Current MAC Address in EEPROM:  ");
 	int i;
 	for (i = 1; i < 6; ++i)
-		printf("%02x:", read_eeprom_reg(i));
-	printf("%02x\n", read_eeprom_reg(i));
+		printf("%02x:", read_eeprom_reg(dev, i));
+	printf("%02x\n", read_eeprom_reg(dev, i));
 }
 
 /**
  *	dump_eeprom - dump the whole content of the EEPROM
  */
-static void dump_eeprom(void)
+static void dump_eeprom(struct eth_device *dev)
 {
 	int i;
 	puts("EEPROM:\n");
 	for (i = 0; i < 7; ++i)
-		printf("%02x: 0x%02x\n", i, read_eeprom_reg(i));
+		printf("%02x: 0x%02x\n", i, read_eeprom_reg(dev, i));
 }
 
 /**
  *	smc911x_init - get the MAC/EEPROM up and ready for use
  */
-static int smc911x_init(void)
+static int smc911x_init(struct eth_device *dev)
 {
 	/* See if there is anything there */
-	if (!smc911x_detect_chip())
+	if (!smc911x_detect_chip(dev))
 		return 1;
 
-	smc911x_reset();
+	smc911x_reset(dev);
 
 	/* Make sure we set EEDIO/EECLK to the EEPROM */
-	if (smc911x_reg_read(GPIO_CFG) & GPIO_CFG_EEPR_EN) {
-		while (smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+	if (smc911x_reg_read(dev, GPIO_CFG) & GPIO_CFG_EEPR_EN) {
+		while (smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY)
 			if (smsc_ctrlc()) {
 				printf("init: timeout (E2P_CMD = 0x%08x)\n",
-					smc911x_reg_read(E2P_CMD));
+					smc911x_reg_read(dev, E2P_CMD));
 				return 1;
 			}
-		smc911x_reg_write(GPIO_CFG, smc911x_reg_read(GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
+		smc911x_reg_write(dev, GPIO_CFG,
+			smc911x_reg_read(dev, GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
 	}
 
 	return 0;
@@ -317,6 +322,11 @@ static char *getline(void)
  */
 int smc911x_eeprom(int argc, char *argv[])
 {
+	/* Avoid initializing on stack as gcc likes to call memset() */
+	struct eth_device dev;
+	dev.name = __func__;
+	dev.iobase = CONFIG_SMC911X_BASE;
+
 	/* Print the ABI version */
 	app_startup(argv);
 	if (XF_VERSION != get_version()) {
@@ -328,7 +338,7 @@ int smc911x_eeprom(int argc, char *argv[])
 
 	/* Initialize the MAC/EEPROM somewhat */
 	puts("\n");
-	if (smc911x_init())
+	if (smc911x_init(&dev))
 		return 1;
 
 	/* Dump helpful usage information */
@@ -360,11 +370,11 @@ int smc911x_eeprom(int argc, char *argv[])
 
 		/* Now parse the command */
 		switch (line[0]) {
-		case 'W': write_stuff(line);  break;
-		case 'D': dump_eeprom();      break;
-		case 'M': dump_regs();        break;
-		case 'C': copy_from_eeprom(); break;
-		case 'P': print_macaddr();    break;
+		case 'W': write_stuff(&dev, line); break;
+		case 'D': dump_eeprom(&dev);       break;
+		case 'M': dump_regs(&dev);         break;
+		case 'C': copy_from_eeprom(&dev);  break;
+		case 'P': print_macaddr(&dev);     break;
 		unknown_cmd:
 		default:  puts("ERROR: Unknown command!\n\n");
 		case '?':
@@ -373,11 +383,3 @@ int smc911x_eeprom(int argc, char *argv[])
 		}
 	}
 }
-
-#else
-int smc911x_eeprom(int argc, char *argv[])
-{
-	puts("Not supported for this board\n");
-	return 1;
-}
-#endif

include/asm-arm/unaligned.h

@@ -1,7 +1,8 @@
 #ifndef _ASM_ARM_UNALIGNED_H
 #define _ASM_ARM_UNALIGNED_H
 
-#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
 #include <linux/unaligned/generic.h>
 
 /*

include/asm-ppc/fsl_pci.h

@@ -25,6 +25,7 @@
 int is_fsl_pci_agent(enum law_trgt_if trgt, u32 host_agent);
 int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel);
 
+int fsl_is_pci_agent(struct pci_controller *hose);
 void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data);
 void fsl_pci_config_unlock(struct pci_controller *hose);
 void ft_fsl_pci_setup(void *blob, const char *pci_alias,
@@ -62,7 +63,6 @@ typedef struct pci_inbound_window {
 #define PIWAR_LOCAL		0x00f00000
 #define PIWAR_READ_SNOOP	0x00050000
 #define PIWAR_WRITE_SNOOP	0x00005000
-#define PIWAR_IWS_4K		0x0000000b
 	u32	res2[3];
 } pit_t;
 
@@ -172,7 +172,7 @@ struct fsl_pci_info {
 };
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
-			struct pci_controller *hose, int busno, int pcie_ep);
+				struct pci_controller *hose, int busno);
 
 #define SET_STD_PCI_INFO(x, num) \
 {			\

include/configs/canyonlands.h

@@ -593,7 +593,7 @@
 #define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_FPGA_BASE | 0x3a000) /* BAS=FPGA,BS=2MB,BU=R/W,BW=16bit*/
 #endif	/* !defined(CONFIG_ARCHES) */
 
-#define CONFIG_SYS_EBC_CFG		0xB8400000		/*  EBC0_CFG */
+#define CONFIG_SYS_EBC_CFG		0xbfc00000
 
 /*
  * Arches doesn't use PerCS3 but GPIO43, so let's configure the GPIO

include/configs/lpd7a400-10.h

@@ -76,6 +76,5 @@
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE	(0x70000000)
 #undef CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC_USE_IOFUNCS
 
 #endif  /* __LPD7A400_10_H */

include/configs/lpd7a404-10.h

@@ -76,6 +76,5 @@
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE	(0x70000000)
 #undef CONFIG_SMC_USE_32_BIT
-#define CONFIG_SMC_USE_IOFUNCS
 
 #endif  /* __LPD7A404_10_H */

include/configs/lpd7a404.h

@@ -72,7 +72,7 @@
 #include <config_cmd_default.h>
 
 #ifndef USE_920T_MMU
-    #define CONFIG_CMD_PING)
+    #define CONFIG_CMD_PING
     #undef CONFIG_CMD_CACHE
 #else
     #define CONFIG_CMD_DATE

include/configs/sbc8349.h

@@ -158,7 +158,7 @@
 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 
 #define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |	/* flash Base address */ \
-				(2 << BR_PS_SHIFT) |	/* 32 bit port size */	 \
+				(2 << BR_PS_SHIFT) |	/* 16 bit port size */	 \
 				BR_V)			/* valid */
 
 #define CONFIG_SYS_OR0_PRELIM		0xFF806FF7	/* 8 MB flash size */

include/linux/unaligned/be_byteshift.h

@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_be16(const u8 *p)
+{
+	return p[0] << 8 | p[1];
+}
+
+static inline u32 __get_unaligned_be32(const u8 *p)
+{
+	return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
+}
+
+static inline u64 __get_unaligned_be64(const u8 *p)
+{
+	return (u64)__get_unaligned_be32(p) << 32 |
+	       __get_unaligned_be32(p + 4);
+}
+
+static inline void __put_unaligned_be16(u16 val, u8 *p)
+{
+	*p++ = val >> 8;
+	*p++ = val;
+}
+
+static inline void __put_unaligned_be32(u32 val, u8 *p)
+{
+	__put_unaligned_be16(val >> 16, p);
+	__put_unaligned_be16(val, p + 2);
+}
+
+static inline void __put_unaligned_be64(u64 val, u8 *p)
+{
+	__put_unaligned_be32(val >> 32, p);
+	__put_unaligned_be32(val, p + 4);
+}
+
+static inline u16 get_unaligned_be16(const void *p)
+{
+	return __get_unaligned_be16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_be32(const void *p)
+{
+	return __get_unaligned_be32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_be64(const void *p)
+{
+	return __get_unaligned_be64((const u8 *)p);
+}
+
+static inline void put_unaligned_be16(u16 val, void *p)
+{
+	__put_unaligned_be16(val, p);
+}
+
+static inline void put_unaligned_be32(u32 val, void *p)
+{
+	__put_unaligned_be32(val, p);
+}
+
+static inline void put_unaligned_be64(u64 val, void *p)
+{
+	__put_unaligned_be64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_BE_BYTESHIFT_H */

include/linux/unaligned/le_byteshift.h

@@ -0,0 +1,70 @@
+#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
+#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
+
+#include <linux/types.h>
+
+static inline u16 __get_unaligned_le16(const u8 *p)
+{
+	return p[0] | p[1] << 8;
+}
+
+static inline u32 __get_unaligned_le32(const u8 *p)
+{
+	return p[0] | p[1] << 8 | p[2] << 16 | p[3] << 24;
+}
+
+static inline u64 __get_unaligned_le64(const u8 *p)
+{
+	return (u64)__get_unaligned_le32(p + 4) << 32 |
+	       __get_unaligned_le32(p);
+}
+
+static inline void __put_unaligned_le16(u16 val, u8 *p)
+{
+	*p++ = val;
+	*p++ = val >> 8;
+}
+
+static inline void __put_unaligned_le32(u32 val, u8 *p)
+{
+	__put_unaligned_le16(val >> 16, p + 2);
+	__put_unaligned_le16(val, p);
+}
+
+static inline void __put_unaligned_le64(u64 val, u8 *p)
+{
+	__put_unaligned_le32(val >> 32, p + 4);
+	__put_unaligned_le32(val, p);
+}
+
+static inline u16 get_unaligned_le16(const void *p)
+{
+	return __get_unaligned_le16((const u8 *)p);
+}
+
+static inline u32 get_unaligned_le32(const void *p)
+{
+	return __get_unaligned_le32((const u8 *)p);
+}
+
+static inline u64 get_unaligned_le64(const void *p)
+{
+	return __get_unaligned_le64((const u8 *)p);
+}
+
+static inline void put_unaligned_le16(u16 val, void *p)
+{
+	__put_unaligned_le16(val, p);
+}
+
+static inline void put_unaligned_le32(u32 val, void *p)
+{
+	__put_unaligned_le32(val, p);
+}
+
+static inline void put_unaligned_le64(u64 val, void *p)
+{
+	__put_unaligned_le64(val, p);
+}
+
+#endif /* _LINUX_UNALIGNED_LE_BYTESHIFT_H */

lib_arm/board.c

@@ -93,23 +93,23 @@ extern void rtl8019_get_enetaddr (uchar * addr);
  * May be supplied by boards if desired
  */
 void inline __coloured_LED_init (void) {}
-void inline coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
+void coloured_LED_init (void) __attribute__((weak, alias("__coloured_LED_init")));
 void inline __red_LED_on (void) {}
-void inline red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
+void red_LED_on (void) __attribute__((weak, alias("__red_LED_on")));
 void inline __red_LED_off(void) {}
-void inline red_LED_off(void)	     __attribute__((weak, alias("__red_LED_off")));
+void red_LED_off(void) __attribute__((weak, alias("__red_LED_off")));
 void inline __green_LED_on(void) {}
-void inline green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
+void green_LED_on(void) __attribute__((weak, alias("__green_LED_on")));
 void inline __green_LED_off(void) {}
-void inline green_LED_off(void)__attribute__((weak, alias("__green_LED_off")));
+void green_LED_off(void) __attribute__((weak, alias("__green_LED_off")));
 void inline __yellow_LED_on(void) {}
-void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
+void yellow_LED_on(void) __attribute__((weak, alias("__yellow_LED_on")));
 void inline __yellow_LED_off(void) {}
-void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
+void yellow_LED_off(void) __attribute__((weak, alias("__yellow_LED_off")));
 void inline __blue_LED_on(void) {}
-void inline blue_LED_on(void)__attribute__((weak, alias("__blue_LED_on")));
+void blue_LED_on(void) __attribute__((weak, alias("__blue_LED_on")));
 void inline __blue_LED_off(void) {}
-void inline blue_LED_off(void)__attribute__((weak, alias("__blue_LED_off")));
+void blue_LED_off(void) __attribute__((weak, alias("__blue_LED_off")));
 
 /************************************************************************
  * Init Utilities							*

lib_nios/board.c

@@ -49,7 +49,6 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 
-extern void malloc_bin_reloc (void);
 typedef int (init_fnc_t) (void);
 
 
@@ -115,7 +114,6 @@ void board_init (void)
 
 	/* The Malloc area is immediately below the monitor copy in RAM */
 	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-	malloc_bin_reloc();
 
 	WATCHDOG_RESET ();
 	bd->bi_flashsize = flash_init();

lib_nios2/board.c

@@ -52,7 +52,6 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 
-extern void malloc_bin_reloc (void);
 typedef int (init_fnc_t) (void);
 
 
@@ -121,7 +120,6 @@ void board_init (void)
 
 	/* The Malloc area is immediately below the monitor copy in RAM */
 	mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-	malloc_bin_reloc();
 
 	WATCHDOG_RESET ();
 	bd->bi_flashsize = flash_init();

lib_sh/board.c

@@ -32,7 +32,6 @@
 #include <miiphy.h>
 #endif
 
-extern void malloc_bin_reloc (void);
 extern int cpu_init(void);
 extern int board_init(void);
 extern int dram_init(void);
@@ -92,7 +91,6 @@ static int sh_mem_env_init(void)
 {
 	mem_malloc_init(TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
 			CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16);
-	malloc_bin_reloc();
 	env_relocate();
 	jumptable_init();
 	return 0;

nand_spl/nand_boot_fsl_elbc.c

@@ -25,7 +25,6 @@
 
 #include <common.h>
 #include <asm/io.h>
-#include <asm/immap_83xx.h>
 #include <asm/fsl_lbc.h>
 #include <linux/mtd/nand.h>